Hairpin-loop formation by inverted repeats in supercoiled DNA is a local and transmissible property

Short inverted repeat sequences adopt hairpin stem-loop type structures in supercoiled closed circular DNA molecules, demonstrated by S1 nuclease cleavage. Fine mapping of cleavage frequencies is in good agreement with expected cleavage patterns based upon the interaction between an unpaired loop and a sterically bulky enzyme molecule. Whilst the topological properties of underwound DNA circles depend ultimately upon reduced linkage, necessarily a global molecular property, hairpin loop formation is an essentially local property. Thus molecular size is unimportant for the S1 hypersensitivity of the Co1E1 inverted repeat. Furthermore, a 440 bp Sau3AI, EcoRI fragment of Co1E1 which contains the inverted repeat has been cloned into pBR322 whereupon it exhibits S1 cleavage similar to Co1E1 in the supercoiled recombinant molecule. The effect is therefore both local and transmissible. Direct competition, between inverted repeats in the recombinant, coupled with close examination of flanking sequences, enables some simple 'rules' for base pairing in hairpin loops to be formulated. Whilst limited G-T and A-C base pairing appears not to be destabilising, A-G, T-C or loop outs are highly destabilising.     

Structural perturbation in supercoiled DNA: hypersensitivity to modification by a single-strand-selective chemical reagent conferred by inverted repeat sequences.

Bromoacetaldehyde, a reagent which modifies unpaired adenine residues, selectively modifies supercoiled DNA in the region of inverted repeats which are known targets for single-strand-specific nucleases. The reaction is dependent upon the topological state of the molecule, and the absolute importance of the inverted repeat has been demonstrated. Finer mapping of the distribution of the modification pattern reveals significant and interesting differences from the S1 nuclease target positions. Bromoacetaldehyde modification is distributed over a wider region covering the whole inverted repeat, with greatest extent of reaction in the regions which flank the inverted repeat. It is suggested that an altered conformation may be propagated into these sequences. These results further support the contention that inverted repeats adopt an altered conformation when negatively supercoiled, for which the principal suggestion remains the cruciform structure.     

Effect of base composition at the center of inverted repeated DNA sequences on cruciform transitions in DNA

We have analyzed the effect of base composition at the center of symmetry of inverted repeated DNA sequences on cruciform transitions in supercoiled DNA. For this we have constructed two series of palindromic DNA sequences: one set with differing center and one set with differing center and arm sequences. The F series consists of two 96-base pair perfect inverted repeats which are identical except for the central 10 base pairs which consist of pure AT or GC base pairs. The S series was constructed such that the overall base composition of the inverted repeats was identical but in which the positioning of blocks of AT- and GC-rich sequences varied. The rate of cruciform formation for the inverted repeats in plasmid pUC8 was dramatically influenced by the 8-10 base pairs at the center of the inverted repeat. Inverted repeats with 8-10 AT base pairs in the center were kinetically much more active in cruciform formation than inverted repeats with 8-10 GC base pairs in the center. These experiments show a dominant influence of the center sequences of inverted repeats on the rate of cruciform formation.     

Interarm interaction of DNA cruciform forming at a short inverted repeat sequence

A novel interarm interaction of DNA cruciform forming at inverted repeat sequence was characterized using an S1 nuclease digestion, permanganate oxidation, and microscopic imaging. An inverted repeat consisting of 17 bp complementary sequences was isolated from the bluegill sunfish Lepomis macrochirus (Perciformes) and subcloned into the pUC19 plasmid, after which the supercoiled recombinant plasmid was subjected to enzymatic and chemical modification. In high salt conditions (200 mM NaCl, or 100-200 mM KCl), S1 nuclease cut supercoiled DNA at the center of palindromic symmetry, suggesting the formation of DNA cruciform. On the other hand, S1 nuclease in the presence of 150 mM NaCl or less cleaved mainly the 3'-half of the repeat, thereby forming an unusual structure in which the 3'-half of the inverted repeat, but not the 5'-half, was retained as an unpaired strand. Permanganate oxidation profiles also supported the presence of single-stranded part in the 3'-half of the inverted repeat in addition to the center of the symmetry. Both electron microscopy and atomic force microscopy have detected a thick protrusion on the supercoiled DNA harboring the inverted repeat. We hypothesize that the cruciform hairpins at conditions favoring triplex formation adopt a parallel side-by-side orientation of the arms allowing the interaction between them supposedly stabilized by hydrogen bonding of base triads.     

Inverted repeat sequences can influence the melting transitions of linear DNAs

The influence of inverted repeat sequences on the melting transitions of linear DNAs has been examined. Derivative melting curves (DMC) of a 514 base pair (bp) DNA, seven subfragments of this DNA, and four other DNAs have been compared to predictions of DNA melting theory. The 514-bp DNA contains three inverted repeat sequences that can form cruciform structures in supercoiled DNA. We refer to these sequences as c-inverted repeats. Previous work showed that the DMC of this DNA, unlike a number of other DNAs, is not accurately predicted by DNA melting theory. Since the theoretical model does not include hairpin-like structures, it was suggested that hairpin or cruciform formation in these inverted repeats may be responsible for this discrepancy. Our results support this hypothesis. Predicted DMCs are in good agreement with DNAs with no inverted repeats, or inverted repeats not evident in supercoiled DNA. Differences between the theoretical and experimental Tm's are less than or equal to 0.3 degrees C. DNA molecules that contain one or more of the three c-inverted repeats are not as accurately predicted. Experimental Tm values are lower than predicted values by 0.7-3.8 degrees C. It is concluded that some inverted repeat sequences can form hairpin-like structures during the melting of linear DNAs. These structures appear to lower overall DNA stability.     

S1 sensitive sites in adenovirus DNA.

S1 nuclease has been used as a probe for regions of DNA secondary structure in supercoiled recombinant plasmids containing adenovirus (Ad) DNA sequences. In the sequences examined two S1 sensitive sites were identified in the left-terminal 16.5% of Ad 12 DNA, one of which aligned approximately with an inverted repeat region in the DNA sequence. In addition an S1 sensitive site was dictated by a potential cruciform structure in the region of the Ad 2 major late promoter. In contrast to the expected cleavage site at the loop of the cruciform, cleavage occurred at the base of the stem in the region of the TATA box. All three S1 sensitive sites identified were more sensitive to S1 than the endogenous sites in the parent plasmids.     

Cruciform-resolvase interactions in supercoiled DNA

T4 endonuclease VII, which cleaves Holliday-like junctions in DNA, specifically cleaves short inverted repeats in supercoiled plasmids. These sequences are subject to site-specific cleavage by single-strand-specific nucleases, and cruciform formation has been suggested as an explanation for this observation. This proposal is greatly strengthened by the present data, since a formal analogy between cruciform structures and Holliday junctions exists. Resolution of a variety of unrelated cruciform sequences demonstrates that the cleavage process results in a linear molecule with hairpin ends and single ligatable nicks at positions corresponding to the stem-base of the cruciform. In two examples mapped in detail, the cleavages are exclusively introduced at two or three nucleotides from the end of the symmetric sequence at the 5' side on each strand. These studies demonstrate the potential of endonuclease VII as a probe of cruciform structure and the utility of short cruciform structures as Holliday junction models.     

Analysis of chemical and enzymatic cleavage frequencies in supercoiled DNA

Chemical and enzymatic probing methods are powerful techniques for examining details of sequence-dependent structure in DNA and RNA. Reagents that cleave nucleic acid molecules in a structure-specific, but relatively sequence-non-specific manner, such as hydroxyl radical or DNase I, have been used widely to probe helical geometry in nucleic acid structures, nucleic acid-drug complexes, and in nucleoprotein assemblies. Application of cleavage-based techniques to structures present in superhelical DNA has been hindered by the fact that the cleavage pattern attributable to supercoiling-dependent structures is heavily mixed with non-specific cleavage signals that are inevitable products of multiple cleavage events. We present a rigorous mathematical procedure for extracting the cleavage pattern specific to supercoiled DNA and use this method to investigate the hydroxyl radical cleavage pattern in a cruciform DNA structure formed by a 60 bp inverted repeat sequence embedded in a negatively supercoiled plasmid. Our results support the presence of a stem-loop structure in the expected location and suggest that the helical geometry of the cruciform stem differs from that of the normal duplex form.     

On the Deletion of Inverted Repeated DNA in Escherichia Coli: Effects of Length, Thermal Stability, and Cruciform Formation in Vivo

We have studied the deletion of inverted repeats cloned into the EcoRI site within the CAT gene of plasmid pBR325. A cloned inverted repeat constitutes a palindrome that includes both EcoRI sites flanking the insert. In addition, the two EcoRI sites represent direct repeats flanking a region of palindromic symmetry. A current model for deletion between direct repeats involves the formation of DNA secondary structure which may stabilize the misalignment between the direct repeats during DNA replication. Our results are consistent with this model. We have analyzed deletion frequencies for several series of inverted repeats, ranging from 42 to 106 bp, that were designed to form cruciforms at low temperatures and at low superhelical densities. We demonstrate that length, thermal stability of base pairing in the hairpin stem, and ease of cruciform formation affect the frequency of deletion. In general, longer palindromes are less stable than shorter ones. The deletion frequency may be dependent on the thermal stability of base pairing involving approximately 16-20 bp from the base of the hairpin stem. The formation of cruciforms in vivo leads to a significant increase in the deletion frequency. A kinetic model is presented to describe the relationship between the physical-chemical properties of DNA structure and the deletion of inverted repeats in living cells.     

Stress-induced cruciform formation in a cloned d(CATG)10 sequence.

The synthetic alternating purine-pyrimidine sequence, d(CATG)10.d(CATG)10, has been cloned into a 2.079-kb pBR322-derived plasmid (pLN1) and its conformation studied under torsional stress. The resultant plasmid, pLNc40, is hypersensitive to cleavage by the single strand-specific nucleases, S1 nuclease and Bal31 nuclease, and to modification by the single strand-selective reagent, osmium tetroxide. The S1-hypersensitive site of this plasmid predominates over those previously mapped in pBR322. Site-specific cleavage of pLNc40 with the resolvase T4 endonuclease VII demonstrates that this alternating purine-pyrimidine tract selectively forms a cruciform structure when stably integrated into a negatively supercoiled plasmid. Quantitative measurements of the twist change (-4.3 +/- 0.2) and free energy of formation (16.2 +/- 0.5 kcal/mol) of this cruciform have been made from two-dimensional gel electrophoresis experiments, and correspond well with the predicted values of cruciform formation for this sequence. We conclude that cruciform extrusion versus the B-Z transition is the favoured conformation of this insert under torsional stress.     

The physical chemistry of cruciform structures in supercoiled DNA molecules

Inverted repeat DNA sequences extrude cruciform structures when present in negatively supercoiled molecules, stabilised by the release of torsional stress brought about by the negative twist change. We have revealed the presence of cruciform structures by means of enzyme and chemical probing experiments and topological band shift methods. The geometry of cruciform structures has been studied from two points of view. The unpairing of bases in the loop region has been investigated using bisulphite modification, with the result that the central four nucleotides have single-stranded character, and the next pair have only partially single-stranded nature. Gel electrophoretic studies of a pseudo-cruciform structure indicate that the cruciform junction introduces a pronounced bend into the molecule. The dependence of the formation of the ColE1 cruciform upon DNA supercoiling shows that it has a free energy of formation of 18.4 +/- 0.5 kcal mole-1. The kinetics of the extrusion process are complex. Most sequences extrude slowly with considerable temperature coefficients, but the detailed properties are strongly sequence-dependent. One synthetic inverted repeat sequence which we have studied in detail has an Arrhenius activation energy of 42.4 +/- 3.2 kcal mole-1. We discuss possible mechanistic pathways for the extrusion process.     

The mechanism of cruciform formation in supercoiled DNA: initial opening of central basepairs in salt-dependent extrusion.

There are two alternative pathways by which inverted repeat sequences in supercoiled DNA molecules may extrude cruciform structures, called C-type and S-type. S-type cruciforms, which form the great majority, are characterised by absolute requirement for cations to promote extrusion, which then proceeds at higher temperatures and with lower activation parameters than for C-type cruciforms. The mechanism proposed for S-type extrusion involves an initial opening of basepairs limited to the centre of the inverted repeat, formation of intra-strand basepairing and a four-way junction, and finally branch migration to the fully extruded cruciform. The model predicts that central sequence changes will be more kinetically significant than those removed from the centre. We have studied the kinetics of cruciform extrusion by a series of inverted repeats related to that of pIRbke8 by either one or two mutations in the symmetric unit. We find that mutations in the central 8 to 10 nucleotides may profoundly affect extrusion rates--the fastest being 2000-fold faster than the slowest, whereas mutations further from the centre affect rates to a much smaller extent, typically up to ten-fold. These data support the proposed mechanism for extrusion via central opening.     

Localized chemical hyperreactivity in supercoiled DNA: evidence for base unpairing in sequences that induce low-salt cruciform extrusion

Certain A + T-rich DNA sequences (C-type inducing sequences) cause adjacent inverted repeats to undergo cruciform extrusion by a particular pathway (C-type extrusion), which is characterized by large activation energies and extrusion at low salt concentrations and relatively low temperatures. When they are supercoiled, these sequences become reactive toward the normally single-strand-selective reagents bromoacetaldehyde, glyoxal, osmium tetraoxide, and sodium bisulfite. The following evidence is presented: (1) The most reactive sequences are those to the left of the inverted repeat. (2) Chemical reactivity is suppressed by either sodium chloride or micromolar concentrations of distamycin. The suppression of reactivity closely parallels that of C-type cruciform extrusion. (3) Chemical reactivity requires a threshold level of negative supercoiling. The threshold superhelix density depends on the prevailing salt concentration. (4) Analysis of temperature dependences suggests that reaction with osmium tetraoxide involves transient unstacking events, while bromoacetaldehyde requires larger scale helix opening. Thus a variety of opening events may occur in the supercoiled A + T-rich sequences, from small-amplitude breathing to low-frequency, large-amplitude openings. The latter appear to be responsible for C-type cruciform extrusion.     

Nucleosome "phasing" and cruciform structures in circular supercoiled pBR322 DNA

Cruciform structures have been detected in pBR322 supercoiled DNA, both in its naked state and when complexed with histone octamer, using S1 endonuclease cleavage and EcoRI restriction. An inspection of the DNA sequence shows that the S1-hypersensitive sites are very near to AT-rich regions of pBR322 genome. A nucleosome "phasing" in these regions, as found on AT-rich regions of SV40 DNA (15), has been shown by restriction enzymes analysis. On the basis of these results it can be proposed that cruciform structures protrude on the nucleosome surface. This model explains the reason why these structures, which need high superhelical density, can exist in supercoiled DNA partially relaxed by nucleosome formation.     

The supercoil-stabilised cruciform of ColE1 is hyper-reactive to osmium tetroxide

Supercoiled pColIR215 contains a site of pronounced hyper-reactivity towards modification by osmium tetroxide, a reagent known to be single-strand-selective. The site of hypersensitivity has been mapped to the ColE1 inverted repeat, believed to extrude a cruciform in supercoiled DNA. Linear or relaxed plasmids are not modified by the reagent. We conclude that cruciform formation is responsible for the site-selective modification. Fine mapping of the modification site as a function of time has revealed that the initial reaction occurs at the centre of the inverted repeat, i.e., the unpaired loop of the cruciform, but that the modification region rapidly expands outwards from this point.     

Real-time detection of DNA topological changes with a fluorescently labeled cruciform

Topoisomerases are essential cellular enzymes that maintain the appropriate topological status of DNA and are the targets of several antibiotic and chemotherapeutic agents. High-throughput (HT) analysis is desirable to identify new topoisomerase inhibitors, but standard in vitro assays for DNA topology, such as gel electrophoresis, are time-consuming and are not amenable to HT analysis. We have exploited the observation that closed-circular DNA containing an inverted repeat can release the free energy stored in negatively supercoiled DNA by extruding the repeat as a cruciform. We inserted an inverted repeat containing a fluorophore-quencher pair into a plasmid to enable real-time monitoring of plasmid supercoiling by a bacterial topoisomerase, Escherichia coli gyrase. This substrate produces a fluorescent signal caused by the extrusion of the cruciform and separation of the labels as gyrase progressively underwinds the DNA. Subsequent relaxation by a eukaryotic topoisomerase, human topo IIα, causes reintegration of the cruciform and quenching of fluorescence. We used this approach to develop a HT screen for inhibitors of gyrase supercoiling. This work demonstrates that fluorescently labeled cruciforms are useful as general real-time indicators of changes in DNA topology that can be used to monitor the activity of DNA-dependent motor proteins.     

Molecular characterization of a repeat element causing large-scale size variation in the mitochondrial DNA of the sea scallop Placopecten magellanicus

The scallop Placopecten magellanicus has the largest reported animal mitochondrial DNA (average 35 kb) and exhibits large inter- and intraindividual length variation owing to the varying copy number of a repeated element. We have characterized the repeat array by using restriction mapping and sequence analysis. The repeated element consists of 1,442 bp flanked on either side by the sequence ACTTTCC in a direct orientation. The array contains two to eight copies of the repeated element arranged in a direct orientation and in tandem. Only complete copies of the element are present in the array. The repeat element contains three regions with characteristic nucleotide sequences: a 10-bp inverted repeat shown to extrude into a cruciform in a supercoiled DNA plasmid, a 120-bp tract rich in G/C (70%) and adjacent to the inverted repeat, and periodically interspersed homopolymer runs of A and T occurring near the middle of the element which induce DNA curvature in dimeric constructs of the element. The element appears to be unique to P. magellanicus. The structural properties of the repeat element and its organization in an array of repeats may be important in explaining the generation and maintenance of large-scale mitochondrial DNA size variation observed in many animal species.     

Nucleosome “phasing” and cruciform structures in circular supercoiled pBR322 DNA

Cruciform structures have been detected in pBR322 supercoiled DNA, both in its naked state and when complexed with histone octamer, using S1 endonuclease cleavage and EcoRI restriction. An inspection of the DNA sequence shows that the S1-hypersensitive sites are very near to AT-rich regions of pBR322 genome. A nucleosome “phasing” in these regions, as found on AT-rich regions of SV40 DNA (15), has been shown by restriction enzymes analysis. On the basis of these results it can be proposed that cruciform structures protrude on the nucleosome surface. This model explains the reason why these structures, which need high superhelical density, can exist in supercoiled DNA partially relaxed by nucleosome formation.     

The interactions of enzyme and chemical probes with inverted repeats in supercoiled DNA

In negatively supercoiled DNA molecules some inverted repeat sequences adopt a perturbed conformation which is characterised by the following properties. They are centrally hypersensitive to single-strand-specific nucleases such as S1, and to a much lower extent the flanking regions may also be sensitive. They are also hypersensitive to modification by bromoacetaldehyde, particularly in their flanking region. They may be resistant to endonucleolysis by restriction enzymes and are cleaved (resolved) by a T4 resolving enzyme. All these properties can only be consistently explained by a model in which the inverted repeat adopts a cruciform structure. This property has been shown to depend sharply on a superhelix density, and the transition to nuclease sensitivity is accompanied by a marked alteration in the overall molecular geometry as judged by frictional properties. The probable dynamics of these structures are discussed.