A short helix in the C-terminal region of LolA is important for the specific membrane localization of lipoproteins

The structures of a lipoprotein carrier, LolA, and a lipoprotein receptor, LolB, are similar except for an extra C-terminal loop containing a 3(10) helix and beta-strand 12 in LolA. Lipoprotein release was significantly reduced when beta-12 was deleted. Deletion of the 3(10) helix also inhibited the lipoprotein release. Furthermore, lipoproteins were non-specifically localized to membranes when LolA lacked the 3(10) helix. Thus, the membrane localization of lipoproteins with the LolA derivative lacking the 3(10) helix was independent of LolB whereas LolB was essential for the outer membrane localization of lipoproteins with the wild-type LolA.     

Crucial steps in the structure determination of the Na+/H+ antiporter NhaA in its native conformation

Sodium proton antiporters are ubiquitous membrane proteins. Their importance for cell viability is the result of their role in homeostasis of intracellular pH, cellular Na+ content and cell volume. Recently, the first structure of this family of secondary transporters, namely of NhaA from Escherichia coli, revealed a novel fold and elucidated the molecular basis for the mechanism of transport and its regulation by pH. Here, we describe the key steps for the structure determination of NhaA, an iterative process of improving protein quality as well as crystallization conditions. Protein quality was optimized by shortening the purification to a single step and by changing the expression host. The major steps for crystal improvement were the exchange of the detergent during protein purification from the beta- to the alpha-anomer of DDM, the addition of OG to the crystallization set ups, and the growth of the crystals under conditions suitable for cryo-temperatures. Unexpectedly, the dimeric association of the transporter in the 3D crystal lattice is non-physiological. A comparison of the X-ray structure with the electron density map from cryo-electron microscopy of 2D crystals demonstrates that the NhaA helix packing in the 3D crystal is identical with the one in the lipid environment. Thus, the antiporter is in a native conformation in the 3D crystals.     

Detergents destabilize the cubic phase of monoolein: implications for membrane protein crystallization

The in meso method for membrane protein crystallization uses a lipidic cubic phase as the hosting medium. The cubic phase provides a lipid bilayer into which the protein presumably reconstitutes and from which protein crystals nucleate and grow. The solutions used to spontaneously form the protein-enriched cubic phase often contain significant amounts of detergents that were employed initially to purify and to solubilize the membrane protein. By virtue of their surface activity, detergents have the potential to impact on the phase properties of the in meso system and, by extension, the outcome of the crystallization process. The purpose of this study was to quantify the effects that a popular series of nonionic detergents, the n-alkyl-beta-D-glucopyranosides, have on the phase behavior of hydrated monoolein, the lipid upon which the in meso method is based. Phase identity and phase microstructure were characterized by small-angle x-ray diffraction on samples prepared to mimic in meso crystallization conditions. Measurements were made in the 0-40 degrees C range. Samples prepared in the cooling direction allow for the expression of metastability, a feature of liquid crystalline phases that might be exploited in low-temperature crystallization. The results show that the cubic phase is relatively insensitive to small amounts of alkyl glucosides. However, at higher levels the detergents trigger a transition to the lamellar phase in a temperature- and salt concentration-dependent manner. These effects have important implications for in meso crystallization. A diffraction-based method for assaying detergents is presented.     

The funnel approach to the precrystallization production of membrane proteins

Challenges in the production of integral membrane proteins for structural studies include low expression levels, incorrect membrane insertion, aggregation and instability. In this report, we describe a “funnel approach” to overcoming these difficulties and demonstrate its efficacy in a case study of 36 prokaryotic P-type transporters. A diverse ensemble of modified constructs is generated and tested for expression in Escherichia coli, membrane localization, detergent extraction, and homogeneity. High-throughput methodologies are implemented throughout the process to facilitate identification of promising targets. We find that the choice of promoter, the choice of source organism providing the cloned gene, and, most importantly, the position of the affinity tag have a great effect on successful production. The latter had pronounced effects at all tested levels, from expression levels observed in whole cells to the extent of membrane insertion, and even on protein function. Following the initial streamlined screening, we were able to fine-tune and produce 9 of the 36 targets as materials suitable for crystallization or other structural studies.     

Biochemical characterization of an ABC transporter LptBFGC complex required for the outer membrane sorting of lipopolysaccharides

Seven Lpt proteins (A through G) are thought to be involved in lipopolysaccharide transport from the inner to outer membrane of Escherichia coli. LptB belongs to the ATP-binding cassette transporter superfamily. Although the lptB gene lacks neighboring genes encoding membrane subunits, bioinformatic analyses recently indicated that two distantly located consecutive genes, lptF and lptG, could encode membrane subunits. To examine this possibility, LptB was expressed with LptF and LptG. We report here that both LptF and LptG formed a complex with LptB. Furthermore, an inner membrane protein, LptC, which had been implicated in lipopolysaccharide transport, was also included in this complex.

Structured summary

MINT-7137021: lptb (uniprotkb:P0A9V1) physically interacts (MI:0914) with lptc (uniprotkb:P0ADV9), lptg (uniprotkb:P0ADC6) and lptf (uniprotkb:P0AF98) by pull down (MI:0096)MINT-7137160: lptb (uniprotkb:P0A9V1) physically interacts (MI:0914) with lptf (uniprotkb:P0AF98) and lptg (uniprotkb:P0ADC6) by pull down (MI:0096)     

Predicted bacteriorhodopsin from Exiguobacterium sibiricum is a functional proton pump

The predicted Exigobacterium sibiricum bacterirhodopsin gene was amplified from an ancient Siberian permafrost sample. The protein bacteriorhodopsin from Exiguobacterium sibiricum (ESR) encoded by this gene was expressed in Escherichia coli membrane. ESR bound all-trans-retinal and displayed an absorbance maximum at 534 nm without dark adaptation. The ESR photocycle is characterized by fast formation of an M intermediate and the presence of a significant amount of an O intermediate. Proteoliposomes with ESR incorporated transport protons in an outward direction leading to medium acidification. Proton uptake at the cytoplasmic surface of these organelles precedes proton release and coincides with M decay/O rise of the ESR.     

Crystal structure of YihS in complex with D-mannose: structural annotation of Escherichia coli and Salmonella enterica yihS-encoded proteins to an aldose-ketose isomerase

The three-dimensional structure of a Salmonella enterica hypothetical protein YihS is significantly similar to that of N-acyl-d-glucosamine 2-epimerase (AGE) with respect to a common scaffold, an α₆/α₆-barrel, although the function of YihS remains to be clarified. To identify the function of YihS, Escherichia coli and S. enterica YihS proteins were overexpressed in E. coli, purified, and characterized. Both proteins were found to show no AGE activity but showed cofactor-independent aldose-ketose isomerase activity involved in the interconversion of monosaccharides, mannose, fructose, and glucose, or lyxose and xylulose. In order to clarify the structure/function relationship of YihS, we determined the crystal structure of S. enterica YihS mutant (H248A) in complex with a substrate (d-mannose) at 1.6 Å resolution. This enzyme-substrate complex structure is the first demonstration in the AGE structural family, and it enables us to identify active-site residues and postulate a reaction mechanism for YihS. The substrate, β-d-mannose, fits well in the active site and is specifically recognized by the enzyme. The substrate-binding site of YihS for the mannose C1 and O5 atoms is architecturally similar to those of mutarotases, suggesting that YihS adopts the pyranose ring-opening process by His383 and acidifies the C2 position, forming an aldehyde at the C1 position. In the isomerization step, His248 functions as a base catalyst responsible for transferring the proton from the C2 to C1 positions through a cis-enediol intermediate. On the other hand, in AGE, His248 is thought to abstract and re-adduct the proton at the C2 position of the substrate. These findings provide not only molecular insights into the YihS reaction mechanism but also useful information for the molecular design of novel carbohydrate-active enzymes with the common scaffold, α₆/α₆-barrel.     

Characteristics affecting expression and solubilization of yeast membrane proteins

Biochemical and structural analysis of membrane proteins often critically depends on the ability to overexpress and solubilize them. To identify properties of eukaryotic membrane proteins that may be predictive of successful overexpression, we analyzed expression levels of the genomic complement of over 1000 predicted membrane proteins in a recently completed Saccharomyces cerevisiae protein expression library. We detected statistically significant positive and negative correlations between high membrane protein expression and protein properties such as size, overall hydrophobicity, number of transmembrane helices, and amino acid composition of transmembrane segments. Although expression levels of membrane and soluble proteins exhibited similar negative correlations with overall hydrophobicity, high-level membrane protein expression was positively correlated with the hydrophobicity of predicted transmembrane segments. To further characterize yeast membrane proteins as potential targets for structure determination, we tested the solubility of 122 of the highest expressed yeast membrane proteins in six commonly used detergents. Almost all the proteins tested could be solubilized using a small number of detergents. Solubility in some detergents depended on protein size, number of transmembrane segments, and hydrophobicity of predicted transmembrane segments. These results suggest that bioinformatic approaches may be capable of identifying membrane proteins that are most amenable to overexpression and detergent solubilization for structural and biochemical analyses. Bioinformatic approaches could also be used in the redesign of proteins that are not intrinsically well-adapted to such studies.     

Cold temperature-induced modifications to the composition and structure of the lipopolysaccharide of Yersinia pestis

Following a report of variations in the lipopolysaccharide (LPS) structure of Yersinia pestis at mammalian (37 degrees C) and flea (25 degrees C) temperatures, a number of changes to the LPS structure were observed when the bacterium was cultivated at a temperature of winter-hibernating rodents (6 degrees C). In addition to one of the known Y. pestis LPS types, LPS of a new type was isolated from Y. pestis KM218 grown at 6 degrees C. The core of the latter differs in: (i) replacement of terminal galactose with terminal d-glycero-d-manno-heptose; (ii) phosphorylation of terminal oct-2-ulosonic acid with phosphoethanolamine; (iii) a lower content of GlcNAc, and; (iv) the absence of glycine; lipid A differs in the lack of any 4-amino-4-deoxyarabinose and presumably partial (di)oxygenation of a fatty acid(s). The data obtained suggest that cold temperature switches on an alternative mechanism of control of the synthesis of Y. pestis LPS.     

The structure of the antigenic polysaccharide produced by Eubactrium saburreum T15

The antigenic polysaccharide was obtained from the cell wall of Eubacterium saburreum strain T15 by trypsin digestion followed by gel permeation and ion-exchange chromatography. Its structure was determined using acid hydrolysis, methylation analysis, and 1D and 2D NMR spectroscopy. It contained L-threo-pent-2-ulose (Xul), D-fucose (Fuc), and D-glycero-D-galacto-heptose (Hep) in 2:3:3 ratio. Methylation analysis indicated an octasaccharide repeating-unit containing five branches. The 1H and 13C signals in NMR spectra of the sugar residues were assigned by COSY, HOHAHA, and HMQC 2D experiments, and the sequence of sugar residues in the repeating unit was determined by NOESY and HMBC experiments. The polysaccharide also contains two O-acetyl groups in the repeating unit, located on the Hep residue. The repeating structure can be written as: [see text for equation]. This is a novel structure in bacterial cell-wall polysaccharides from Gram-positive bacteria.     

Real time analysis of lipoprotein transfer from LolA to LolB by means of surface plasmon resonance

Lipoproteins of Escherichia coli are sorted to the outer membrane through a pathway composed of five Lol proteins. LolA transports lipoproteins released from the inner membrane by LolCDE to LolB on the outer membrane via the periplasm. Interaction between LolA and LolB was speculated to be strong when LolA binds lipoprotein. However, due to a lack of a sensitive method, the kinetics of this reaction have not been examined in detail. We report here the detection of lipoprotein transfer in real time by means of surface plasmon resonance. The kinetic parameters of lipoprotein transfer were determined with wild-type LolA and a mutant defective in it.

Structured summary

MINT-7259948: mlolB (uniprotkb:P61320) binds (MI:0407) to pal (uniprotkb:P0A912) by surface plasmon resonance (MI:0107)     

Site-directed alkylation of LacY: effect of the proton electrochemical gradient

Previous N-ethylmaleimide-labeling studies show that ligand binding increases the reactivity of single-Cys mutants located predominantly on the periplasmic side of LacY and decreases reactivity of mutants located for the most part of the cytoplasmic side. Thus, sugar binding appears to induce opening of a periplasmic pathway with closing of the cytoplasmic cavity resulting in alternative access of the sugar-binding site to either side of the membrane. Here we describe the use of a fluorescent alkylating reagent that reproduces the previous observations with respect to sugar binding. We then show that generation of an H⁺ electrochemical gradient (Δ_μ¯H+, interior negative) increases the reactivity of single-Cys mutants on the periplasmic side of the sugar-binding site and in the putative hydrophilic pathway. The results suggest that Δ_μ¯H+, like sugar, acts to increase the probability of opening on the periplasmic side of LacY.     

Studying subunit-subunit interactions in a bacterial ABC transporterby in vitro assembly

The thermostable arginine ABC transporter of Geobacillus stearothermophilus consists of a solute binding protein, ArtJ; a transmembrane subunit, ArtM; and a nucleotide-binding subunit, ArtP. An ArtM/His₆-ArtP complex was functionally assembled from separately purified subunits as demonstrated by assaying stimulation of its ATPase activity by arginine-loaded ArtJ in proteoliposomes. Studying in vitro assembly with variants carrying mutations in the conserved Q loop and/or the EAA loop of ArtP and ArtM, respectively, confirmed the predicted roles of both motifs in intersubunit signaling and physical interaction, respectively. In vitro assembly is considered a useful tool for investigating assembly defects of ABC transporters caused by mutations.     

Base catalysed isomerisation of aldoses of the arabino and lyxo series in the presence of aluminate

Base-catalysed isomerisation of aldoses of the arabino and lyxo series in aluminate solution has been investigated. L-Arabinose and D-galactose give L-erythro-2-pentulose (L-ribulose) and D-lyxo-2-hexulose (D-tagatose), respectively, in good yields, whereas lower reactivity is observed for 6-deoxy-D-galactose (D-fucose). From D-lyxose, D-mannose and 6-deoxy-L-mannose (L-rhamnose) are obtained mixtures of ketoses and C-2 epimeric aldoses. Small amounts of the 3-epimers of the ketoses were also formed. 6-Deoxy-L-arabino-2-hexulose (6-deoxy-L-fructose) and 6-deoxy-L-glucose (L-quinovose) were formed in low yields from 6-deoxy-L-mannose and isolated as their O-isopropylidene derivatives. Explanations of the differences in reactivity and course of the reaction have been suggested on the basis of steric effects.     

Crystal structure and functional characterization of a D-stereospecific amino acid amidase from Ochrobactrum anthropi SV3, a new member of the penicillin-recognizing proteins

D-amino acid amidase (DAA) from Ochrobactrum anthropi SV3, which catalyzes the stereospecific hydrolysis of D-amino acid amides to yield the D-amino acid and ammonia, has attracted increasing attention as a catalyst for the stereospecific production of D-amino acids. In order to clarify the structure-function relationships of DAA, the crystal structures of native DAA, and of the D-phenylalanine/DAA complex, were determined at 2.1 and at 2.4 A resolution, respectively. Both crystals contain six subunits (A-F) in the asymmetric unit. The fold of DAA is similar to that of the penicillin-recognizing proteins, especially D-alanyl-D-alanine-carboxypeptidase from Streptomyces R61, and class C beta-lactamase from Enterobacter cloacae strain GC1. The catalytic residues of DAA and the nucleophilic water molecule for deacylation were assigned based on these structures. DAA has a flexible Omega-loop, similar to class C beta-lactamase. DAA forms a pseudo acyl-enzyme intermediate between Ser60 O(gamma) and the carbonyl moiety of d-phenylalanine in subunits A, B, C, D, and E, but not in subunit F. The difference between subunit F and the other subunits (A, B, C, D and E) might be attributed to the order/disorder structure of the Omega-loop: the structure of this loop cannot assigned in subunit F. Deacylation of subunit F may be facilitated by the relative movement of deprotonated His307 toward Tyr149. His307 N(epsilon2) extracts the proton from Tyr149 O(eta), then Tyr149 O(eta) attacks a nucleophilic water molecule as a general base. Gln214 on the Omega-loop is essential for forming a network of water molecules that contains the nucleophilic water needed for deacylation. Although peptidase activity is found in almost all penicillin-recognizing proteins, DAA lacks peptidase activity. The lack of transpeptidase and carboxypeptidase activities may be attributed to steric hindrance of the substrate-binding pocket by a loop comprised of residues 278-290 and the Omega-loop.     

Selecting Optimum Eukaryotic Integral Membrane Proteins for Structure Determination by Rapid Expression and Solubilization Screening

A medium-throughput approach is used to rapidly identify membrane proteins from a eukaryotic organism that are most amenable to expression in amounts and quality adequate to support structure determination. The goal was to expand knowledge of new membrane protein structures based on proteome-wide coverage. In the first phase, membrane proteins from the budding yeast Saccharomyces cerevisiae were selected for homologous expression in S. cerevisiae, a system that can be adapted to expression of membrane proteins from other eukaryotes. We performed medium-scale expression and solubilization tests on 351 rationally selected membrane proteins from S. cerevisiae. These targets are inclusive of all annotated and unannotated membrane protein families within the organism's membrane proteome. Two hundred seventy-two targets were expressed, and of these, 234 solubilized in the detergent n-dodecyl-β-d-maltopyranoside. Furthermore, we report the identity of a subset of targets that were purified to homogeneity to facilitate structure determinations. The extensibility of this approach is demonstrated with the expression of 10 human integral membrane proteins from the solute carrier superfamily. This discovery-oriented pipeline provides an efficient way to select proteins from particular membrane protein classes, families, or organisms that may be more suited to structure analysis than others.     

Recognition of selected monosaccharides by Pseudomonas aeruginosa Lectin II analyzed by molecular dynamics and free energy calculations

In this study, interactions of selected monosaccharides with the Pseudomonas aeruginosa Lectin II (PA-IIL) are analyzed in detail. An interesting feature of the PA-IIL binding is that the monosaccharide is interacting via two calcium ions and the binding is unusually strong for protein-saccharide interaction. We have used Molecular Mechanics Poisson-Boltzmann Surface Area (MM/PBSA) and normal mode analysis to calculate the free energy of binding. The impact of intramolecular hydrogen bond network for the lectin/monosaccharide interaction is also analyzed.     

The structure of the carbohydrate backbone of the LPS from Shewanella putrefaciens CN32

The lipopolysaccharide (LPS) from a natural rough strain of Shewanella putrefaciens CN32 was analyzed using NMR and mass spectroscopy and chemical methods, and the following structure of its carbohydrate backbone is proposed: beta-Galf-(1-->3)-beta-Gal-(1-->4)-beta-Glc-(1-->4)-alpha-DDHep2PEtN-(1-->5)-alpha-Kdo4P-(1-->6)-beta-GlcN4P-(1-->6)-alpha-GlcN1P     

Facile synthesis of benzyl beta-D-galactofuranoside. A convenient intermediate for the synthesis of D-galactofuranose-containing molecules

Benzyl beta-D-galactofuranoside was efficiently obtained from 1,2,3,5,6-penta-O-benzoyl-alpha,beta-D-galactofuranose, via benzyl 2,3,5,6-tetra-O-benzoyl-beta-D-galactofuranoside. Conditions for the O-debenzylation were investigated in order to evaluate the synthetic application of the benzyl group as an anomeric protector of a galactofuranose moiety in synthetic strategies involving galactofuranose.