Construction of a Pseudozyma antarctica strain without foreign DNA sequences (self-cloning strain) for high yield production of a biodegradable plastic-degrading enzyme

ABSTRACT

The basidiomycetous yeast Pseudozyma antarctica GB-4(0) esterase (PaE) is a promising candidate for accelerating degradation of used biodegradable plastics (BPs). To increase safety and reduce costs associated with the use of PaE, we constructed a self-cloning strain with high-PaE productivity. A Lys12 gene (PaLYS12)-deleted lysine auxotroph strain GB4-(0)-L1 was obtained from GB-4(0) by ultraviolet mutagenesis and nystatin enrichment. Subsequently, the PaE gene (PaCLE1) expression cassette consisting of GB-4(0)-derived PaCLE1, under the control of a xylose-inducible xylanase promoter with PaLYS12, was randomly introduced into the GB4-(0)-L1 genome. A PaE high-producing strain, PGB474, was selected from among the transformants by high throughput double-screening based on its ability to degrade emulsified polybutylene succinate-co-adipate. Quantitative PCR revealed that four copies of the PaE gene expression cassette were introduced into the PGB474 genome. PGB474 produced 2.0 g/L of PaE by xylose-fed-batch cultivation using a 3-L jar fermentor for 72 h.     

Creation of a heterologous gene expression system on the basis of <Emphasis Type="Italic">Aspergillus awamori</Emphasis> recombinant strain

A heterologous gene expression system was created in a domestic Aspergillus awamori Co-6804 strain, which is a producer of glucoamylase. Vector pGa was prepared using promoter and terminator areas of the glucoamylase gene, and Aspergillus niger phytase, Trichoderma reesei endoglucanase, and Penicillium canescens xylanase genes were then cloned into pGa vector. Separation of enzyme samples using FPLC showed the amount of the recombinant proteins to be within the 0.6–14% range of total protein.     

The effective expression of xylanase gene in <Emphasis Type="Italic">Candida utilis</Emphasis> by 18S rDNA targeted homologous recombination in pGLR9K

In order to test whether 18S rDNA can influence positively xylanase gene effective expression in the yeast of Candida utilis, a targeting vector pGLR9K-XA was constructed by adding an interested gene xynA from Streptomyces olivaceoviridis into the vector pGLR9K which is constructed by ourselves. pGLR9K contains the 18S rDNA, GAP promoter and CYH resistance gene sequence, all of which is from C. utilis. Then the vector pGLR9K-XA was transformed into C. utilis. To test the vector and transformed system, PCR, Southern blot and DNS methods were used. The results showed that xylanase gene can be detected in the chromosome DNA of recombinant C. utilis and the enzyme activity of xylanase is up to 60 IU ml⁻¹ in the study. It is suggested that this system can be used to express exogenous genes in C. utilis as a bioreactors. This is the first report that xylanase gene was expressed in C. utilis.     

Marker-disruptive gene integration and URA3 recycling for multiple gene manipulation in <Emphasis Type="Italic">Saccharomyces cerevisiae</Emphasis>

The introduction of several kinds of genes into the yeast chromosome is a powerful tool in many fields from fundamental study to industrial application. Here, we describe a general strategy for one-step gene integration and a marker recycling method. Forty base pairs of a short sequence derived from a region adjacent to the HIS3 locus were placed between cell surface displaying β-glucosidase (BGL) and URA3 marker genes. HIS3 deletion and BGL–URA3 fragment integration were achieved via a PCR fragment consisting of the BGL–URA3 fragment attached to homology sequences flanked by the HIS3 targeting locus. The obtained his3::URA3 disruptants were plated on a 5-FOA plate to select for the URA3 deletion due to repeated sequences at both sides of URA3 gene. In all selected colonies, BGL genes were integrated at the targeted HIS3 locus and URA3 was completely deleted. In addition, introduced BGL was efficiently expressed, and the transformants fermented cellobiose to ethanol effectively. As our strategy creates next transformation markers continuously together with gene integration, this method can serve as a simple and powerful tool for multiple genetic manipulations in yeast engineering.     

A New Method for Repeated “Self-Cloning” Promoter Replacement in <Emphasis Type="Italic">Saccharomyces cerevisiae</Emphasis>

A method for repeated PCR-mediated promoter replacement in the yeast Saccharomyces cerevisiae is described. It was proposed to use the DNA fragment comprising the marker gene that enables both positive and negative selection (a selectable/counter-selectable marker) surrounded by direct repeats of the desired promoter as a promoter replacement cassette. This fragment is integrated upstream of the target gene because of PCR-added terminal sequences for homologous recombination with the target locus. Subsequent marker excision via homologous recombination between the copies of the two promoters leaves one copy of the desired promoter upstream of the target genes, without any heterologous scar sequence. To test this method, a set of plasmids bearing the S. cerevisiae URA3 gene surrounded by two copies of the ADH1 or PGK1 promoter was constructed. Using these cassettes, the native promoters of the GSH1 and GSH2 genes were replaced in the ura3Δ0 recipient strains. The proposed method is useful for research applications due to simple marker excision, and for construction of “self-cloning” industrial strains, because no heterologous DNA is retained in the genome of the resulting strain after marker excision.     

Construction of a recombinant yeast strain converting xylose and glucose to ethanol

Candida shehatae gene xyl1 and Pichia stipitis gene xyl2, encoding xylose reductase (XR) and xylitol dehydrogenase (XD) respectively, were amplified by PCR. The genes xyl1 and xyl2 were placed under the control of promoter GAL in vector pYES2 to construct the recombinant expression vector pYES2-P12. Subsequently the vector pYES2-P12 was transformed into S. cerevisiae YS58 by LiAc to produce the recombinant yeast YS58-12. The alcoholic ferment indicated that the recombinant yeast YS58-12 could convert xylose to ethanol with the xylose consumption rate of 81.3%. __________ Translated from Microbiology, 2006, 33(3): 104–108 [译自:微生物学通报]     

Cloning and restriction mapping of the yeast URA2 gene coding for the carbamyl phosphate synthetase aspartate-transcarbamylase complex

Summary Two yeast DNA pools inserted in an hybridEscherichia coli-yeast vector pFL1 were used to transformE. coli and yeast aspartate-transcarbamylase-less strains to prototrophy. From the first pool — aBamHI yeast DNA digest — a 6.4 kbBamHI fragment was recovered that gave good complementation of theE. coli auxotrophy but poor complementation of the yeast auxotrophy. From the second pool — a partialSau3A yeast DNA digest — five independent plasmids complementing eitherE. coli, yeast, or both were recovered. Each of the five plasmids possessed sequences in common with the 6.4 kbBamHI fragment. One of these plasmids, which complemented the twoURA2 activities in yeast and which produced a carbamyl-phosphate synthetase, aspartate-transcarbamylase complex sensitive to UTP feedback inhibition contained the fullURA2 gene. A restriction map of theURA2 gene has been constructed and seven different consecutive segments have been recloned in pBR322 to measure their hybridization withURA2 messenger RNA, allowing us to estimate the limits of the gene.     

De novo synthesis,constitutive expression of <Emphasis Type="Italic">Aspergillus sulphureus</Emphasis> β-xylanase gene in <Emphasis Type="Italic">Pichia pastoris</Emphasis> and partial enzymic characterization

The endo-β-1, 4-xylanase gene xynA from Aspergillus sulphureus, encoded a lack-of-signal peptide protein of 184 amino acids, was de novo synthesized by splicing overlap extension polymerase chain reaction according to Pichia pastoris protein’s codon bias. The synthetic DNA, composed of 572 nucleotides, was ligated into the downstream sequence of an α-mating factor in a constitutive expression vector pGAPzαA and electrotransformed into the P. pastoris X-33 strain. The transformed yeast screened by Zeocin was able to constitutively secrete the xylanase in yeast–peptone–dextrose liquid medium. The heterogenous DNA was stabilized in the strain by 20-times passage culture. The recombinant enzyme was expressed with a yield of 120 units/mL under the flask culture at 28°C for 3 days. The enzyme showed optimal activity at 50°C and pH 2.4–3.4. Residual activity of the raw recombinant xylanase was not less than 70% when fermentation broth was directly heated at 80°C for 30 min. However, the dialyzed xylanase supernatant completely lost the catalytic activity after being heated at 60°C for 30 min. The recombinant xylanase showed no obvious activity alteration by being pretreated with Na₂HPO₄-citric acid buffer of pH 2.4 for 2 h. The xylanase also showed resistance to certain metal ions (Na⁺, Mg²⁺, Ca²⁺, K⁺, Ba²⁺, Zn²⁺, Fe²⁺, and Mn²⁺) and EDTA. These biochemical characteristics suggest that the recombinant xylanase has a prospective application in feed industry as an additive.     

Activation of the human estrogen receptor by estrogenic and antiestrogenic compounds in Saccharomyces cerevisiae: a positive selection system

The yeast URA3 gene was used as a reporter to investigate the activities of estrogenic and antiestrogenic compounds in yeast Saccharomyces cerevisiae. The control sequences of the wild type (wt) URA3 promoter were replaced with zero, two, or six copies of estrogen-response elements (ERE). Insertion of two and six copies of ERE rendered the expression of the URA3 gene to be dependent on the presence of the human estrogen receptor (ER) and the hormone 17β-estradiol (E₂). Two versions of the ER genes were constructed: a full-length wild-type ER (ERa-f) and a truncated ER with domains C, D, and E (ERcde). Both forms of the ER were able to activate the ERE-URA3 reporter in a hormone-dependent manner. The growth of yeast transformants were hormone-dependent when the reporter constructs were inserted into chromosomes using yeast integrating vectors (YIp) but not with the 2μ-based episomal (high-copy number, YEp) or centromeric (low-copy number, YCp) vectors. The integrated transformants were employed to investigate the effects of estrogenic and antiestrogenic compounds. The estrogenic compounds, E₂, diethylstilbestrol (DES), and estrone (EST), activated expression of the reporter genes at 1 nM concentration, which is the same concentration exhibiting activity in mammalian cells. None of the antiestrogens, at concentrations up to 1 μM, including tamoxifen (TAM), raloxifene (RAL), and ICI 164,384 (ICI) antagonized 1 nM of E₂ against either form of the ER. In fact, TAM, RAL, and ICI displayed slight agonistic activity at high concentrations of 300 nM or greater to the ERcde. This system can be used to investigate or clone the missing factor(s) that is responsible for the antagonistic activity of the ER in yeast, and is also suitable for screening for the effectors of the ER.     

Modification of a gene encoding hybrid xylanase and its expression in Pichia pastoris

To obtain the protein expression of a hybrid xylanase in yeast, the gene encoding it was modified according to the codon bias of Pichia pastoris and expressed extracellularly in this yeast as an active xylanase, MBtx, exhibited a molecular mass of approximately 35 kDa on SDS–PAGE. The pH behavior of MBtx in terms of both activity and stability was similar to that of Btx, original gene product in Escherichia coli, while a certain difference was observed in optimal temperature for activity and in thermal stability. HPLC analysis revealed the xylan in wheat could be hydrolyzed by MBtx and the major hydrolysis product was xylotriose. These results showed codon usage played a key role in regulating the expression of the hybrid xylanase in P. pastoris and the recombinant hybrid xylanase, MBtx, produced by P. pastoris could be potentially useful in feed industry.     

Repression of the expression of genes encoding xylanolytic enzymes in Aspergillusoryzae by introduction of multiple copies of the xynF1 promoter

A xylanase gene, xynF1, was cloned and characterized from a shoyu koji mould Aspergillus oryzae KBN616. The xynF1 gene was found to be comprised of 1484 bp with ten introns. The deduced amino acid sequence encodes a protein consisting of 327 amino acids (35,402 Da) which is very similar to the fungal family F xylanases such as Aspergillus nidulans XlnC, Aspergillus kawachii XynA and Penicillium chrysogenum XylP. The intron/exon organization of xynF1 is very similar to that of the fungal family F xylanase genes. Plasmid pXPR64, which contains 64 copies of the xynF1 promoter region (PxynF1) in the same direction, was constructed and introduced into A. oryzae. This led to reduced expression of both xylanase and β-xylosidase genes in the transformants. Received: 18 May 1998 / Received revision: 7 July 1998 / Accepted: 9 July 1998     

Modulating heterologous protein production in yeast: the applicability of truncated auxotrophic markers

The use of auxotrophic Saccharomyces cerevisiae strains for improved production of a heterologous protein was examined. Two different marker genes were investigated, encoding key enzymes in the metabolic pathways for amino acid (LEU2) and pyrimidine (URA3) biosynthesis, respectively. Expression plasmids, carrying the partly defective selection markers LEU2d and URA3d, were constructed. Two CEN.PK-derived strains were chosen and insulin analogue precursor was selected as a model protein. Different truncations of the LEU2 and URA3 promoters were used as the mean to titrate the plasmid copy number and thus the recombinant gene dosage in order to improve insulin productivity. Experiments were initially carried out in batch mode to examine the stability of yeast transformants and to select high yielding mutants. Next, chemostat cultivations were run at high cell density to address industrial applicability and long-term expression stability of the transformants. We found that the choice of auxotrophic marker is crucial for developing a yeast expression system with stable heterologous protein production. The incremental truncation of the URA3 promoter led to higher plasmid copy numbers and IAP yields, whereas the truncation of the LEU2 promoter caused low plasmid stability. We show that the modification of the level of the recombinant gene dosage by varying the degree of promoter truncation can be a strong tool for optimization of productivity. The application of the URA3d-based expression systems showed a high potential for industrial protein production and for further academic studies.     

Transgenic barley expressing a fungal xylanase gene in the endosperm of the developing grains

The feasibility of producing plant cell wall polysaccharide-hydrolysing feed enzymes in the endosperm of barley grain was investigated. The coding region of a modified xylanase gene (xynA) from the rumen fungus, Neocallimastix patriciarum, linked with an endosperm-specific promoter from cereal storage protein genes was introduced into barley by Agrobacterium-mediated transformation. Twenty-four independently transformed barley lines with the xylanase gene were produced and analysed. The fungal xylanase was produced in the developing endosperm under the control of either the rice glutelin B-1 (GluB-1) or barley B1 hordein (Hor2-4) promoter. The rice GluB-1 promoter provided an apparently higher expression level of recombinant proteins in barley grain than the barley Hor2-4 promoter in both transient and stable expression experiments. In particular, the mean value for the fungal xylanase activity driven by the GluB-1 promoter in the mature grains of transgenic barley was more than twice that with the Hor2-4 promoter. Expression of the xylanase transgene under these endosperm-specific promoters was not observed in the leaf, stem and root tissues. Accumulation of the fungal xylanase in the developing grains of transgenic barley followed the pattern of storage protein deposition. The xylanase was stably maintained in the grain during grain maturation and desiccation and post-harvest storage. These results indicate that the cereal grain expression system may provide an economic means for large scale production of feed enzymes in the future.     

Efficient selection of hygromycin-B-resistant Yarrowia lipolytica transformants

 The yeast Yarrowia lipolytica was shown to be sensitive to the aminoglycoside antibiotic hygromycin B. Spontaneous resistants appeared at a frequency of (2–5)×10^-7 in media containing 100 mg/l drug. In order to develop a new selective marker for the transformation of this yeast, we constructed new plasmids expressing the Escherichia coli hygromycin-resistance gene (hph) under the control of the promoter and terminator sequences of the strongly expressed XPR2 gene of Y. lipolytica. Direct selection of hygromycin-B-resistant transformants on complete medium was very efficient and resulted in transformation frequencies comparable to those observed with conventional auxotrophic markers. This new marker can be used for integrating single copies of plasmid and for gene disruption and provides a convenient tag for genetic studies. Received: 16 February 1996/Received revision: 12 April 1996/Accepted: 15 April 1996     

A site-directed integration system for the nonuniversal CUGSer codon usage species Pichia farinosa by electroporation

Halotolerant yeast, Pichia farinosa, is a valuable yeast strain in fermentation industry because it produces high yield of glycerol and xylitol, and can tolerate both contamination and high-density growth during fermentation. However, the lack of genetic manipulation tools makes it less popular as a gene engineering strain. Expression systems commonly used in other yeast systems, such as Saccharomyces cerevisiae and Pichia pastoris cannot be used in P. farinosa because it translates universal Leu codon CUG as Ser. Here we reported a modified expression vector and a transformation system with enhanced efficiency in P. farinosa. The results showed that cells of OD₆₀₀ 0.8–1.0 with DTT treatment can obtain high transformation efficiency. The optimized electroporation condition was 900 V, 25 μF, and 200 Ω. The DNA concentration did not influence the transformation. Our system provides the potential not only for applying P. farinosa as an industrial strain of gene engineering, but also for studying gene function in its native host.     

Construction of a food-grade multiple-copy integration system for Lactococcus lactis

A food-grade vector system was developed that allows stable integration of multiple plasmid copies in the chromosome of Lactococcus lactis. The vector consists of the plus origin of replication (Ori⁺) of the lactococcal plasmid pWV01, the sucrose genes of the lactic acid bacterium Pediococcus pentosaceus PPE1.0 as selectable marker, a multiple-cloning site, and a lactococcal DNA fragment of a well-characterized chromosomal region. The system includes two L. lactis strains, LL108 and LL302, which produce the pWV01 RepA protein essential for replication of the Ori⁺ vectors. These helper strains allow the construction and isolation of the replicating form of the integration plasmids from a homologous background. Single-cross-over integration of the plasmids in L. lactis MG1363 resulted in amplifications to a level of approximately 20 copies/chromosome after selection of the transformants on medium containing sucrose as the only fermentable sugar. The amplifications were stable under selective growth conditions. In glucose-containing medium a limited loss of integrated plasmid copies was detected at a rate of (7.5–15) × 10⁻² copies per generation. One strain, MG124, was isolated that had retained 11 integrated copies after a period of 120 generations of non-selective growth. These results show that the single-cross-over integration system described here represents a simple procedure for the engineering of stable food-grade strains carrying multiple copies of a gene of interest. Received: 23 September 1997 / Received revision: 21 November 1997 / Accepted: 21 November 1997