Improved bioethanol production through simultaneous saccharification and fermentation of lignocellulosic agricultural wastes by <Emphasis Type="Italic">Kluyveromyces marxianus</Emphasis> 6556

The combined effect of simultaneous saccharification and fermentation and separate hydrolysis and fermentation (SHF) for ethanol production by Kluyveromyces marxianus 6556 was studied using two lignocellulosic feedstocks viz., corncob and soybean cake. The ethanologenic efficiency of K. marxianus 6556 was observed as 28% (theoretical yield) in a fermentation medium containing glucose, but, there was no ethanol production by cells grown on xylose. A maximum sugar release of 888 mg/g corncob and 552 mg/g soybean cake was achieved through acid hydrolysis pretreatment. Furthermore, corncob and soybean cake treated with commercial cellulase (100 IU for 48 h) from Trichoderma reesei yielded reducing sugars of 205 and 100 mg/g, respectively. Simultaneous saccharification and fermentation resulted in highest ethanol production of 5.68 g/l on corncob and 2.14 g/l on soybean cake after 48 h of incubation. On the contrary, the presence of inhibitors decreased the overall ethanol yield in the hydrolysates obtained through SHF of corncob and soybean cake.     

High consistency enzymatic hydrolysis of hardwood substrates

The feasibility of using a laboratory peg mixer to carry out high consistency enzymatic hydrolysis of lignocellulosic substrates was investigated. Two hardwood substrates, unbleached hardwood pulp (UBHW) and organosolv pretreated poplar (OPP), were used in this study. Hydrolysis of UBHW and OPP at 20% substrate consistency led to a high glucose concentration in the final hydrolysate. For example, a 48 h enzymatic hydrolysis of OPP resulted in a hydrolysate with 158 g/L of glucose. This is the highest glucose concentration ever obtained from enzymatic hydrolysis of lignocellulosic substrates. Fermentation of UBHW and OPP hydrolysates with high glucose content led to high ethanol concentrations, 50.4 and 63.1 g/L, respectively after fermentation. Our results demonstrate that using common pulping equipment to carry out high consistency hydrolysis can overcome the rheological problems and greatly increase the sugar and ethanol concentrations after the hydrolysis and fermentation.     

Comparative evaluations of cellulosic raw materials for second generation bioethanol production

Aims: To evaluate sugar recoveries and fermentabilities of eight lignocellulosic raw materials following mild acid pretreatment and enzyme hydrolysis using a recombinant strain of Zymomonas mobilis. Methods and Results: Dilute acid pretreatment (2% H₂SO₄) with 10% (w/v) substrate loading was performed at 134°C for 60 min followed by enzyme hydrolysis at 60°C. The results demonstrated that hydrolysis of herbaceous raw materials resulted in higher sugar recoveries (up to 60–75%) than the woody sources (<50%). Fermentation studies with recombinant Z. mobilis ZM4 (pZB5) demonstrated that final ethanol concentrations and yields were also higher for the herbaceous hydrolysates. Significant reduction in growth rates and specific rates of sugar uptake and ethanol production occurred for all hydrolysates, with the greatest reductions evident for woody hydrolysates. Further studies on optimization of enzyme hydrolysis established that higher sugar recoveries were achieved at 50°C compared to 60°C following acid pretreatment. Conclusions: Of the various raw materials evaluated, the highest ethanol yields and productivities were achieved with wheat straw and sugarcane bagasse hydrolysates. Sorghum straw, sugarcane tops and Arundo donax hydrolysates were similar in their characteristics, while fermentation of woody hydrolysates (oil mallee, pine and eucalyptus) resulted in relatively low ethanol concentrations and productivities. The concentrations of a range of inhibitory compounds likely to have influence the fermentation kinetics were determined in the various hydrolysates. Significance and Impact of the Study: The study focuses on lignocellulosic materials available for second generation ethanol fermentations designed to use renewable agricultural/forestry biomass rather than food‐based resources. From the results, it is evident that relatively good sugar and ethanol yields can be achieved from some herbaceous raw materials (e.g. sugarcane bagasse and sorghum straw), while much lower yields were obtained from woody biomass.     

Fermentation of cellulosic hydrolysates obtained by enzymatic saccharification of sugarcane bagasse pretreated by hydrothermal processing

This work aims to evaluate the fermentability of cellulosic hydrolysates obtained by enzymatic saccharification of sugarcane bagasse pretreated by hydrothermal processing using Candida guilliermondii FTI 20037 yeast. The inoculum was obtained from yeast culture in a medium containing glucose as a carbon source supplemented with rice bran extract, CaCl₂·2H₂O and (NH₄)₂SO₄ in 50 mL Erlenmeyer flasks, containing 20 mL of medium, initial 5.5 pH under agitation of an orbital shaker (200 rpm) at 30°C for 24 h. The cellulosic hydrolysates, prior to being used as a fermentation medium, were autoclaved for 15 min at 0.5 atm and supplemented with the same nutrients employed for the inoculum, except the glucose, using the same conditions for the inoculum, but with a period of 48 h. Preliminary results showed the highest consumption of glucose (97%) for all the hydrolysates, at 28 h of fermentation. The highest concentration of ethanol (20.5 g/L) was found in the procedure of sugarcane bagasse pretreated by hydrothermal processing (195°C/10 min in 20 L reactor) and delignificated with NaOH 1.0% (w/v), 100°C, 1 h in 500 mL stainless steel ampoules immersed in an oil bath.     

Production of bioalcohols and antioxidant compounds by acid hydrolysis of lignocellulosic wastes and fermentation of hydrolysates with Hansenula polymorpha

The effect of the H₂SO₄ concentration in the hydrolysis of sunflower‐stalk waste, at 95ºC and using a liquid/solid relation of 20, was studied. In a later stage, the hydrolysates were fermented at different temperatures with the aim of ethanol and xylitol production. A total conversion of the hemicellulose at the acid concentration of 0.5 mol/L was achieved; whereas an acid concentration of 2.5 mol/L was needed to reach the maximum value in the conversion of the cellulose fraction. The analysis of the hydrolysis kinetics has enabled to determine the apparent reaction order, which was 1.3. The hydrolysates from hydrolysis process with H₂SO₄ 0.5 mol/L, once detoxified, were fermented at pH 5.5, temperatures 30, 40, and 50ºC with the yeast Hansenula polymorpha (ATCC 34438), resulting in a sequential uptake of sugars. In relation to ethanol and xylitol yields, the best results were observed at 50°C ( = 0.11 g/g;  = 0.12 g/g). Instantaneous xylitol yields were higher than in ethanol, at the three temperatures essayed. Different phenolic compounds were analyzed in the hydrolysates; hydroxytyrosol was the most abundant (3.79 mg/L). The recovery of these compounds entails the elimination of inhibitors in the fermentation process and the production of high value‐added antioxidant products.     

Production of <Emphasis Type="SmallCaps">l</Emphasis>-lactic acid by <Emphasis Type="Italic">Rhizopus oryzae</Emphasis> using semicontinuous fermentation in bioreactor

Semicontinuous fermentation using pellets of Rhizopus oryzae has been recognized as a promising technology for l-lactic acid production. In this work, semicontinuous fermentation of R. oryzae AS 3.819 for l-lactic acid production has been developed with high l-lactic acid yield and volumetric productivity. The effects of factors such as inoculations, CaCO₃ addition time, and temperature on l-lactic acid yield and R. oryzae morphology were researched in detail. The results showed that optimal fermentation conditions for the first cycle were: inoculation with 4% spore suspension, CaCO₃ added to the culture medium at the beginning of culture, and culture temperature of 32–34°C. In orthogonal experiments, high l-lactic acid yield was achieved when the feeding medium was (g/l): glucose, 100; (NH₄)₂SO₄, 2; KH₂PO₄, 0.1; ZnSO₄·7H₂O, 0.33; MgSO₄·7H₂O, 0.15; CaCO₃, 50. Twenty cycles of semicontinuous fermentation were carried out in flask culture. l-lactic acid yield was 78.75% for the first cycle and 80–90% for the repeated cycles; the activities of lactate dehydrogenases (LDH) were 7.2–9.2 U/mg; fermentation was completed in 24 h for each repeated cycle. In a 7-l magnetically stirred fermentor, semicontinuous fermentation lasted for 25 cycles using pellets of R. oryzae AS 3.819 under the optimal conditions determined from flask cultures. The final l-lactic acid concentration (LLAC) reached 103.7 g/l, and the volumetric productivity was 2.16 g/(l·h) for the first cycle; in the following 19 repeated cycles, the final LLAC reached 81–95 g/l, and the volumetric productivities were 3.40–3.85 g/(l·h).     

Improved oxygen transfer and increased l-lactic acid production by morphology control of Rhizopus oryzae in a static bed bioreactor

Rhizopus oryzae was immobilized on a cotton matrix in a static bed bioreactor. Compared with free cells in a stirred tank bioreactor, immobilized R. oryzae in this bioreactor gave higher lactic acid production but lower ethanol production. The highest lactic acid production rate (2.09 g/L h) with the final concentration of 37.83 g/L from 70 g/L glucose was achieved when operating the bioreactor at 700 rpm and 0.5 vvm air. To better understand the relationship between shear effects (agitation and aeration) and R. oryzae morphology and metabolism, oxygen transfer rate, fermentation kinetics, and lactate dehydrogenase activity were determined. In immobilized cell culture, higher oxygen transfer rate and lactic acid production were achieved but lower lactate dehydrogenase activity was found as compared with those in free cell culture operated at the same conditions. These results clearly imply that mass transport was the rate controlling step in lactic acid fermentation by R. oryzae.     

Hydrolysis of Chlorella biomass for fermentable sugars in the presence of HCl and MgCl2

When Chlorella biomass was hydrolyzed in the presence of 2% HCl and 2.5% MgCl₂, a sugar concentration of nearly 12%, and a sugar recovery of about 83% was obtained. Fermentation experiments demonstrated that glucose in the Chlorella biomass hydrolysates was converted into ethanol by Saccharomyces cerevisiae with a yield of 0.47 g g⁻¹, which is 91% of the theoretical yield. This chemical hydrolysis approach is thus a novel route for the hydrolysis of biomass to generate fermentable sugars.     

Development and application of co-culture for ethanol production by co-fermentation of glucose and xylose: a systematic review

This article reviews current co-culture systems for fermenting mixtures of glucose and xylose to ethanol. Thirty-five co-culture systems that ferment either synthetic glucose and xylose mixture or various biomass hydrolysates are examined. Strain combinations, fermentation modes and conditions, and fermentation performance for these co-culture systems are compared and discussed. It is noted that the combination of Pichia stipitis with Saccharomyces cerevisiae or its respiratory-deficient mutant is most commonly used. One of the best results for fermentation of glucose and xylose mixture is achieved by using co-culture of immobilized Zymomonas mobilis and free cells of P. stipitis, giving volumetric ethanol production of 1.277 g/l/h and ethanol yield of 0.49–0.50 g/g. The review discloses that, as a strategy for efficient conversion of glucose and xylose, co-culture fermentation for ethanol production from lignocellulosic biomass can increase ethanol yield and production rate, shorten fermentation time, and reduce process costs, and it is a promising technology although immature.     

Bioethanol production from Gracilaria verrucosa using Saccharomyces cerevisiae adapted to NaCl or galactose

This study examined the pretreatment, enzymatic saccharification, and fermentation of the red macroalgae Gracilaria verrucosa using adapted saccharomyces cerevisiae to galactose or NaCl for the increase of bioethanol yield. Pretreatment with thermal acid hydrolysis to obtain galactose was carried out with 11.7% (w/v) seaweed slurry and 373 mM H₂SO₄ at 121 °C for 59 min. Glucose was obtained from enzymatic hydrolysis. Enzymatic saccharification was performed with a mixture of 16 U/mL Celluclast 1.5L and Viscozyme L at 45 °C for 48 h. Ethanol fermentation in 11.7% (w/v) seaweed hydrolysate was carried out using Saccharomyces cerevisiae KCTC 1126 adapted or non-adapted to high concentrations of galactose or NaCl. When non-adapted S. cerevisiae KCTC 1126 was used, the ethanol productivity was 0.09 g/(Lh) with an ethanol yield of 0.25. Ethanol productivity of 0.16 and 0.19 g/(Lh) with ethanol yields of 0.43 and 0.48 was obtained using S. cerevisiae KCTC 1126 adapted to high concentrations of galactose and NaCl, respectively. Adaptation of S. cerevisiae KCTC 1126 to galactose or NaCl increased the ethanol yield via adaptive evolution of the yeast.

     

Two-step acid and alkaline ethanolysis/alkaline peroxide fractionation of sugarcane bagasse and rice straw for production of polylactic acid precursor

Sugarcane bagasse and rice straw were subjected to acid and alkaline ethanolysis and sequential enzymatic hydrolysis to produce glucose for lactic acid production. Influence of physico-chemical treatments using ultrasonic bath and ultrasonic probe was studied compared with mechanical stirring. The results showed that the highest glucose yield with least contamination of xylose was obtained from acid ethanolysis fractionation (5 N H₂SO₄ + 50%, v/v ethanol) when stirred at 90 °C for 4 h. Alkaline ethanolysis accomplished high amount of both glucose and xylose released, however it was not favorable substrate for homofermentative lactic acid bacteria. In order to enhance enzymatic hydrolysis of acid ethanolysis fractionated samples, lignin was subsequently removed by the second step alkaline/peroxide delignification. The maximum lactic acid was obtained at 23.6 ± 0.2 g/L from Lactobacillus casei fermentation after 72 h when hydrolysate from two-step acid hydrolysis and alkaline/peroxide fractionated sugarcane bagasse containing 24.6 g/L initial glucose concentration was used as substrate.     

Lactic acid production from xylose by the fungus Rhizopus oryzae

Lignocellulosic biomass is considered nowadays to be an economically attractive carbohydrate feedstock for large-scale fermentation of bulk chemicals such as lactic acid. The filamentous fungus Rhizopus oryzae is able to grow in mineral medium with glucose as sole carbon source and to produce optically pure l(+)-lactic acid. Less is known about the conversion by R. oryzae of pentose sugars such as xylose, which is abundantly present in lignocellulosic hydrolysates. This paper describes the conversion of xylose in synthetic media into lactic acid by ten R. oryzae strains resulting in yields between 0.41 and 0.71 g g⁻¹. By-products were fungal biomass, xylitol, glycerol, ethanol and carbon dioxide. The growth of R. oryzae CBS 112.07 in media with initial xylose concentrations above 40 g l⁻¹ showed inhibition of substrate consumption and lactic acid production rates. In case of mixed substrates, diauxic growth was observed where consumption of glucose and xylose occurred subsequently. Sugar consumption rate and lactic acid production rate were significantly higher during glucose consumption phase compared to xylose consumption phase. Available xylose (10.3 g l⁻¹) and glucose (19.2 g l⁻¹) present in a mild-temperature alkaline treated wheat straw hydrolysate was converted subsequently by R. oryzae with rates of 2.2 g glucose l⁻¹ h⁻¹ and 0.5 g xylose l⁻¹ h⁻¹. This resulted mainly into the product lactic acid (6.8 g l⁻¹) and ethanol (5.7 g l⁻¹).     

Ethanol production from concentrated food waste hydrolysates with yeast cells immobilized on corn stalk

The aim of the present study was to examine ethanol production from concentrated food waste hydrolysates using whole cells of S. cerevisiae immobilized on corn stalks. In order to improve cell immobilization efficiency, biological modification of the carrier was carried out by cellulase hydrolysis. The results show that proper modification of the carrier with cellulase hydrolysis was suitable for cell immobilization. The mechanism proposed, cellulase hydrolysis, not only increased the immobilized cell concentration, but also disrupted the sleek surface to become rough and porous, which enhanced ethanol production. In batch fermentation with an initial reducing sugar concentration of 202.64 ± 1.86 g/l, an optimal ethanol concentration of 87.91 ± 1.98 g/l was obtained using a modified corn stalk-immobilized cell system. The ethanol concentration produced by the immobilized cells was 6.9% higher than that produced by the free cells. Ethanol production in the 14th cycle repeated batch fermentation demonstrated the enhanced stability of the immobilized yeast cells. Under continuous fermentation in an immobilized cell reactor, the maximum ethanol concentration of 84.85 g/l, and the highest ethanol yield of 0.43 g/g (of reducing sugar) were achieved at hydraulic retention time (HRT) of 3.10 h, whereas the maximum volumetric ethanol productivity of 43.54 g/l/h was observed at a HRT of 1.55 h.     

Biohydrogen production from cellulosic hydrolysate produced via temperature-shift-enhanced bacterial cellulose hydrolysis

A “temperature-shift” strategy was developed to improve reducing sugar production from bacterial hydrolysis of cellulosic materials. In this strategy, production of cellulolytic enzymes with Cellulomonas uda E3-01 was promoted at a preferable temperature (35 °C), while more efficient enzymatic cellulose hydrolysis was achieved under an elevated culture temperature (45 °C), at which cell growth was inhibited to avoid consumption of reducing sugar. This temperature-shift strategy was shown to markedly increase the reducing sugar (especially, monosaccharide and disaccharide) concentration in the hydrolysate while hydrolyzing pure (carboxymethyl-cellulose, xylan, avicel and cellobiose) and natural (rice husk, rice straw, bagasse and Napier-grass) cellulosic materials. The cellulosic hydrolysates from CMC and xylan were successfully converted to H₂ via dark fermentation with Clostridium butyricum CGS5, attaining a maximum hydrogen yield of 4.79 mmol H₂/g reducing sugar.     

The <Emphasis Type="Italic">Paenibacillus polymyxa</Emphasis> species is abundant among hydrogen-producing facultative anaerobic bacteria in Lake Averno sediment

Lake Averno sediment was used to isolate the facultative anaerobic bacteria having the potential for H₂ production. Twenty-five out of 35 isolates recovered from the sediment sample produced hydrogen under anaerobic conditions from glucose with yields ranging from 0.1 to 0.49 mol H₂/mol glucose. Identification based on 16S rRNA gene sequence analysis revealed that most of them belong to the Firmicutes group, with a prevalence of the Paenibacillus polymyxa species. Seven distinct genomic fingerprints among the 11 P. polymyxa isolates were obtained using the random amplified polymorphic DNA (RAPD) technique. Glucose fermentation by P. polymyxa isolates was investigated. Glucose was totally consumed after 3 days of fermentation. The fermentation products were hydrogen (0.18–0.47 mol H₂/mol glucose), ethanol (0.1–0.5 mol ethanol/mol glucose), and 2,3-butanediol (0.1 mol 2,3-butanediol/mol glucose). Lower amounts of acetic, butyric, formic, lactic, and propionic acids were detected. All metabolic data concerning P. polymyxa isolates were analyzed by cluster analysis to reveal similarities and/or differences with clustering based on RAPD profiles. Despite the high metabolic similarity among almost all P. paenibacillus isolates, results of cluster analyses of metabolic and genetic data do not match completely.     

Production of xylanase under solid-state fermentation by <Emphasis Type="Italic">Aspergillus tubingensis</Emphasis> JP-1 and its application

The production of extracellular xylanase by a locally isolated strain of Aspergillus tubingensis JP-1 was studied under solid-state fermentation. Among the various agro residues used wheat straw was found to be the best for high yield of xylanase with poor cellulase production. The influence of various parameters such as initial pH, moisture, moistening agents, nitrogen sources, additives, surfactants and pretreatment of substrates were investigated. The production of the xylanase reached a peak in 8 days using untreated wheat straw with modified MS medium, pH 6.0 at 1:5 moisture level at 30 °C. Under optimized conditions yield as high as 6,887 ± 16 U/g of untreated wheat straw was achieved. Crude xylanase was used for enzymatic saccharification of agro-residues like wheat straw, rice bran, wheat bran, sugarcane bagasse and industrial paper pulp. Dilute alkali (1 N NaOH) and acid (1 N H₂SO₄) pretreatment were found to be beneficial for the efficient enzymatic hydrolysis of wheat straw. Dilute alkali and acid-pretreated wheat straw yielded 688 and 543 mg/g reducing sugar, respectively. Yield of 726 mg/g reducing sugar was obtained from paper pulp after 48 h of incubation.     

Acid hydrolysis of sugarcane bagasse for lactic acid production

In order to use sugarcane bagasse as a substrate for lactic acid production, optimum conditions for acid hydrolysis of the bagasse were investigated. After lignin extraction, the conditions were varied in terms of hydrochloric (HCl) or sulfuric (H₂SO₄) concentration (0.5–5%, v/v), reaction time (1–5 h) and incubation temperature (90–120 °C). The maximum catalytic efficiency (E) was 10.85 under the conditions of 0.5% of HCl at 100 °C for 5 h, which the main components (in g l⁻¹) in the hydrolysate were glucose, 1.50; xylose, 22.59; arabinose, 1.29; acetic acid, 0.15 and furfural, 1.19. To increase yield of lactic acid production from the hydrolysate by Lactococcus lactis IO-1, the hydrolysate was detoxified through amberlite and supplemented with 7 g l⁻¹ of xylose and 7 g l⁻¹ of yeast extract. The main products (in g l⁻¹) of the fermentation were lactic acid, 10.85; acetic acid, 7.87; formic acid, 6.04 and ethanol, 5.24.     

Efficient production of lactic acid from sucrose and corncob hydrolysate by a newly isolated <Emphasis Type="Italic">Rhizopus oryzae</Emphasis> GY18

The aim of this study is to investigate production of l-lactic acid from sucrose and corncob hydrolysate by the newly isolated R. oryzae GY18. R. oryzae GY18 was capable of utilizing sucrose as a sole source, producing 97.5 g l⁻¹ l-lactic acid from 120 g l⁻¹ sucrose. In addition, the strain was also efficiently able to utilize glucose and/or xylose to produce high yields of l-lactic acid. It was capable of producing up to 115 and 54.2 g l⁻¹ lactic acid with yields of up to 0.81 g g⁻¹ glucose and 0.90 g g⁻¹ xylose, respectively. Corncob hydrolysates obtained by dilute acid hydrolysis and enzymatic hydrolysis of the cellulose-enriched residue were used for lactic acid production by R. oryzae GY18. A yield of 355 g lactic acid per kg corncobs was obtained after 72 h incubation. Therefore, sucrose and corncobs could serve as potential sources of raw materials for efficient production of lactic acid by R. oryzae GY18.     

Enhanced ethanol production from industrial lignocellulose hydrolysates by a hydrolysate-cofermenting Saccharomyces cerevisiae strain

Industrial production of lignocellulosic ethanol requires a microorganism utilizing both hexose and pentose, and tolerating inhibitors. In this study, a hydrolysate-cofermenting Saccharomyces cerevisiae strain was obtained through one step in vivo DNA assembly of pentose-metabolizing pathway genes, followed by consecutive adaptive evolution in pentose media containing acetic acid, and direct screening in biomass hydrolysate media. The strain was able to coferment glucose and xylose in synthetic media with the respective maximal specific rates of glucose and xylose consumption, and ethanol production of 3.47, 0.38 and 1.62 g/g DW/h, with an ethanol titre of 41.07 g/L and yield of 0.42 g/g. Industrial wheat straw hydrolysate fermentation resulted in maximal specific rates of glucose and xylose consumption, and ethanol production of 2.61, 0.54 and 1.38 g/g DW/h, respectively, with an ethanol titre of 54.11 g/L and yield of 0.44 g/g. These are among the best for wheat straw hydrolysate fermentation through separate hydrolysis and cofermentation.

     

Thermophilic biohydrogen production by an anaerobic heat treated-hot spring culture

Batch experiments were conducted to investigate the thermophilic biohydrogen production using an enrichment culture from a Turkish hot spring. Following the enrichment, the culture was heat treated at 100 °C for 10 min to select for spore-forming bacteria. H₂ production was accompanied by production of acetate, butyrate, lactate and ethanol. H₂ production was associated by acetate–butyrate type fermentation while accumulation of lactate and ethanol negatively affected the H₂ yield. H₂ production was highest in the temperature range from 49.6 to 54.8 °C and optimum values for initial pH and concentrations of iron, yeast extract and glucose were 6.5, 40 mg/l, 4–13.5 g/l, respectively. PCR–DGGE profiling showed that the heat treated culture consisted of species closely affiliated to genus Thermoanaerobacterium.