Hydrolysis rates, methane production and nitrogen solubilisation of grey waste components during anaerobic degradation

Municipal grey waste (i.e. the remaining fraction in municipal waste management systems in which putrescibles (biowaste) and other recyclables (paper, metals, glass) are source-segregated) was manually sorted into six main fractions on the basis of composition and also separated by sieving (100 mm mesh size) into two fractions, oversized and undersized, respectively. In practice, in waste management plant the oversized fraction is (or will be) used to produce refuse-derived fuel and the undersized landfilled after biological stabilisation. The methane yields and nitrogen solubilisation of the grey waste and the different fractions (all studied samples were first milled to 5 mm particle samples) were determined in a 237-day methane production batch assay and in a water elution test, respectively. The grey waste was found to contained remnants of putrescibles and also a high amount of other biodegradable waste, including packaging, cartons and cardboard, newsprint, textiles and diapers. These waste fractions comprised 41%-w/w of the grey waste and produced 40-210 m3 methane (total solids (TS))(-1) and less than 0.01 g NH4-N kg TS(added)(-1) except diapers which produced 9.8 g NH4-N kg TS(added)(-1) in the batch assays. In the case of the two sieved fractions and on mass bases, most of the methane originated from the oversized fraction, whereas most of the NH4-N was solublised from the undersized fraction. The first-order kinetic model described rather well the degradation of each grey waste fraction and component, showing the different components to be in the range 0.021-0.058 d(-1), which was around one-sixth of the values reported for the source-segregated putrescible fraction of MSW.     

Steam pressure disruption of municipal solid waste enhances anaerobic digestion kinetics and biogas yield.

Biomass waste, including municipal solid waste (MSW), contains lignocellulosic-containing fiber components that are not readily available as substrates for anaerobic digestion due to the physical shielding of cellulose imparted by the nondigestible lignin. Consequently, a substantial portion of the potentially available carbon is not converted to methane and the incompletely digested residues from anaerobic digestion generally require additional processing prior to their return to the environment. We investigated and developed steam pressure disruption as a treatment step to render lignocellulosic-rich biomass more digestible and as a means for increasing methane energy recovery. The rapid depressurization after steam heating (240 degrees C, 5 min.) of the nondigested residues following a 30-day primary digestion of MSW caused a visible disruption of fibers and release of soluble organic components. The disrupted material, after reinoculation, provided a rapid burst in methane production at rates double those observed in the initial digestion. This secondary digestion proceeded without a lag phase in gas production, provided approximately 40% additional methane yields, and was accompanied by a approximately 40% increase in volatile solids reduction. The secondary digestate was found to be enriched in lignin and significantly depleted in cellulose and hemi-cellulose components when compared to primary digestate. Thus, steam pressure disruption treatment rendered lignocellulosic substrates readily accessible to anaerobic digestion bacteria and improved both the kinetics of biogas production and the overall methane yield from MSW. Steam pressure disruption is central to a new anaerobic digestion process approach including sequential digestion stages and integrated energy recovery, to improve process yields, provide cogenerated energy for process needs, and to provide effective reuse and recycling of waste biomass materials.     

Distributed model of solid waste anaerobic digestion: effects of leachate recirculation and pH adjustment

A distributed model of solid waste digestion in a 1-D bioreactor with leachate recirculation and pH adjustment was developed to analyze the balance between the rates of polymer hydrolysis/acidogenesis and methanogenesis during the anaerobic digestion of municipal solid waste (MSW). The model was calibrated on previously published experimental data generated in 2-L reactors filled with shredded refuse and operated with leachate recirculation and neutralization. Based on model simulations, both waste degradation and methane production were stimulated when inhibition was prevented rapidly from the start, throughout the reactor volume, by leachate recirculation and neutralization. An optimal strategy to reduce the time needed for solid waste digestion is discussed.     

A dynamic mathematical model for sequential leach bed anaerobic digestion of organic fraction of municipal solid waste

A mathematical model that describes the operation of a sequential leach bed process for anaerobic digestion of organic fraction of municipal solid waste (MSW) is developed and validated. This model assumes that ultimate mineralisation of the organic component of the waste occurs in three steps, namely solubilisation of particulate matter, fermentation to volatile organic acids (modelled as acetic acid) along with liberation of carbon dioxide and hydrogen, and methanogenesis from acetate and hydrogen. The model incorporates the ionic equilibrium equations arising due to dissolution of carbon dioxide, generation of alkalinity from breakdown of solids and dissociation of acetic acid. Rather than a charge balance, a mass balance on the hydronium and hydroxide ions is used to calculate pH. The flow of liquid through the bed is modelled as occurring through two zones—a permeable zone with high flushing rates and the other more stagnant. Some of the kinetic parameters for the biological processes were obtained from batch MSW digestion experiments. The parameters for flow model were obtained from residence time distribution studies conducted using tritium as a tracer. The model was validated using data from leach bed digestion experiments in which a leachate volume equal to 10% of the fresh waste bed volume was sequenced. The model was then tested, without altering any kinetic or flow parameters, by varying volume of leachate that is sequenced between the beds. Simulations for sequencing/recirculating 5 and 30% of the bed volume are presented and compared with experimental results.     

Biological nutrients removal from the supernatant originating from the anaerobic digestion of the organic fraction of municipal solid waste

Abstract

This study critically evaluates the biological processes and techniques applied to remove nitrogen and phosphorus from the anaerobic supernatant produced from the treatment of the organic fraction of municipal solid waste (OFMSW) and from its co-digestion with other biodegradable organic waste (BOW) streams. The wide application of anaerobic digestion for the treatment of several organic waste streams results in the production of high quantities of anaerobic effluents. Such effluents are characterized by high nutrient content, because organic and particulate nitrogen and phosphorus are hydrolyzed in the anaerobic digestion process. Consequently, adequate post-treatment is required in order to comply with the existing land application and discharge legislation in the European Union countries. This may include physicochemical and biological processes, with the latter being more advantageous due to their lower cost. Nitrogen removal is accomplished through the conventional nitrification/denitrification, nitritation/denitritation and the complete autotrophic nitrogen removal process; the latter is accomplished by nitritation coupled with the anoxic ammonium oxidation process. As anaerobic digestion effluents are characterized by low COD/TKN ratio, conventional denitrification/nitrification is not an attractive option; short-cut nitrogen removal processes are more promising. Both suspended and attached growth processes have been employed to treat the anaerobic supernatant. Specifically, the sequencing batch reactor, the membrane bioreactor, the conventional activated sludge and the moving bed biofilm reactor processes have been investigated. Physicochemical phosphorus removal via struvite precipitation has been extensively examined. Enhanced biological phosphorus removal from the anaerobic supernatant can take place through the sequencing anaerobic/aerobic process. More recently, denitrifying phosphorus removal via nitrite or nitrate has been explored. The removal of phosphorus from the anaerobic supernatant of OFMSW is an interesting research topic that has not yet been explored. At the moment, standardization in the design of facilities that treat anaerobic supernatant produced from the treatment of OFMSW is still under development. To move toward this direction, it is first necessary to assess the performance of alternative treatment options. It study concentrates existing data regarding the characteristics of the anaerobic supernatant produced from the treatment of OFMSW and from their co-digestion with other BOW. This provides data documenting the effect of the anaerobic digestion operating conditions on the supernatant quality and critically evaluates alternative options for the post-treatment of the liquid fraction produced from the anaerobic digestion process.     

Microbial valorization of underutilized and nonconventional waste streams

The growing burden of waste disposal coupled with natural resource scarcity has renewed interest in the remediation, valorization, and/or repurposing of waste. Traditional approaches such as composting, anaerobic digestion, use in fertilizers or animal feed, or incineration for energy production extract very little value out of these waste streams. In contrast, waste valorization into fuels and other biochemicals via microbial fermentation is an area of growing interest. In this review, we discuss microbial valorization of nonconventional, aqueous waste streams such as food processing effluents, wastewater streams, and other industrial wastes. We categorize these waste streams as carbohydrate-rich food wastes, lipid-rich wastes, and other industrial wastes. Recent advances in microbial valorization of these nonconventional waste streams are highlighted, along with a discussion of the specific challenges and opportunities associated with impurities, nitrogen content, toxicity, and low productivity.     

Peracetic acid oxidation as an alternative pre-treatment for the anaerobic digestion of waste activated sludge

Anaerobic digestion is generally considered to be an economic and environmentally friendly technology for treating waste activated sludge, but has some limitations, such as the time it takes for the sludge to be digested and also the ineffectiveness of degrading the solids. Various pre-treatment technologies have been suggested to overcome these limitations and to improve the biogas production rate by enhancing the hydrolysis of organic matter. This paper studies the use of peracetic acid for disintegrating sludge as a pre-treatment of anaerobic digestion. It has been proved that this treatment effectively leads to a solubilisation of organic material. A maximum increase in biogas production by 21% is achieved. High dosages of PAA lead to a decrease in biogas production. This is due to the inhibition of the anaerobic micro-organisms by the high VFA-concentrations. The evolution of the various VFAs during digestion is studied and the observed trends support this hypothesis.     

添加厨余垃圾对剩余污泥厌氧消化产沼气过程的影响

为提高剩余污泥厌氧消化的沼气产量和甲烷含量,研究了厨余垃圾的不同添加量对剩余污泥厌氧消化性能的影响。结果表明,在35℃下,随着剩余污泥中厨余垃圾添加量的增加,厌氧消化系统中碳氮质量比（C／N）、胞外多聚物（EPS）等生理生化指标均有不同程度的改善。其中当剩余污泥与厨余垃圾质量比为2：1时,混合有机废弃物中沼气产量和甲烷含量均达到最大值,每克挥发性固体（VS）产生了156．56mL沼气,甲烷体积分数为67．52％,分别比剩余污泥单独厌氧消化时的产气量提高了5倍和1．5倍。     

Super blue box recycling (SUBBOR) enhanced two-stage anaerobic digestion process for recycling municipal solid waste: laboratory pilot studies

The super blue box recycling (SUBBOR) process is an enhanced, multi-stage anaerobic digestion process for mixed municipal solid waste (MSW) and other biomass feedstock materials. The technology centers on enhanced high solids, thermophilic digestion after steam-pressure disruption of the ligno-cellulosic fiber components that are recalcitrant to conventional anaerobic digestion. Mixed MSW, rich in organic components but also containing inorganic materials, such as glass, aluminum and steel, as well as non-digestible plastic materials, has been laboratory pilot tested with a fully integrated process train designed to treat and recycle all of the MSW components. Methane yields from the MSW were 0.36 m3 CH4/kg volatile solids (VS) representing a 40% increase over the yield obtained from conventional single stage digestion. The secondary digestion step after steam pressure disruption also provided a 40% improvement in total solids and VS reduction. The residual organic fraction following two-stage digestion was fine in texture and was recovered as a clean peat fraction with reduced contents of heavy metal and other fugitive non-digested contaminants. Mass and energy balance determinations indicated a high degree of MSW diversion from landfill disposal (>80%) was achievable by the SUBBOR process as well as substantial net electrical and thermal energy production. Continuous long-term trials of the SUBBOR process at 25,000 tonnes/year are underway.     

Environmental assessment of energy production from municipal solid waste incineration

Background, Aims and Scope During the combustion of municipal solid waste (MSW), energy is produced which can be utilized to generate electricity. However, electricity production from incineration has to be evaluated from the point view of the environmental performance. In this study, environmental impacts of electricity production from waste incineration plant in Thailand are compared with those from Thai conventional power plants. Methods The evaluation is based on a life cycle perspective using life cycle assessment (LCA) as the evaluation tool. Since MSW incineration provides two services, viz., waste management and electricity production, the conventional power production system is expanded to include landfilling without energy recovery, which is the most commonly used waste management system in Thailand, to provide the equivalent function of waste management. Results The study shows that the incineration performs better than conventional power plants vis-à-vis global warming and photochemical ozone formation, but not for acidification and nutrient enrichment. Discussion There are some aspects which may influence this result. If landfilling with gas collection and flaring systems is included in the analysis along with conventional power production instead of landfilling without energy recovery, the expanded system could become more favorable than the incineration in the global warming point of view. In addition, if the installation of deNO_x process is employed in the MSW incineration process, nitrogen dioxide can be reduced with a consequent reduction of acidification and nutrient enrichment potentials. However, the conventional power plants still have lower acidification and nutrient enrichment potentials. Conclusions The study shows that incineration could not play the major role for electricity production, but in addition to being a waste management option, could be considered as a complement to conventional power production. To promote incineration as a benign waste management option, appropriate deNO_x and dioxin removal processes should be provided. Separation of high moisture content waste fractions from the waste to be incinerated and improvement of the operation efficiency of the incineration plant must be considered to improve the environmental performance of MSW incineration. Recommendations This study provides an overall picture and impacts, and hence, can support a decision-making process for implementation of MSW incineration. The results obtained in this study could provide valuable information to implement incineration. But it should be noted that the results show the characteristics only from some viewpoints. Outlook Further analysis is required to evaluate the electricity production of the incineration plant from other environmental aspects such as toxicity and land-use.     

Volatile fatty acids (VFAs) and methane from food waste and cow slurry: Comparison of biogas and VFA fermentation processes

The potential of various biomasses for the production of green chemicals is currently one of the key topics in the field of the circular economy. Volatile fatty acids (VFAs) are intermediates in the methane formation pathway of anaerobic digestion and they can be produced in similar reactors as biogas to increase the productivity of a digestion plant, as VFAs have more varying end uses compared to biogas and methane. In this study, the aim was to assess the biogas and VFA production of food waste (FW) and cow slurry (CS) using the anaerobic biogas plant inoculum treating the corresponding substrates. The biogas and VFA production of both biomasses were studied in identical batch scale laboratory conditions while the process performance was assessed with chemical and microbial analyses. As a result, FW and CS were shown to have different chemical performances and microbial dynamics in both VFA and biogas processes. FW as a substrate showed higher yields in both processes (435 ml CH₄/g VS_fed and 434 mg VFA/g VS_fed) due to its characteristics (pH, organic composition, microbial communities), and thus, the vast volume of CS makes it also a relevant substrate for VFA and biogas production. In this study, VFA profiles were highly dependent on the substrate and inoculum characteristics, while orders Clostridiales and Lactobacillales were connected with high VFA and butyric acid production with FW as a substrate. In conclusion, anaerobic digestion supports the implementation of the waste management hierarchy as it enables the production of renewable green chemicals from both urban and rural waste materials.     

Influence of fermentation metabolites on redox potential in anaerobic digestion of proteinaceous solid wastes by Synergistes sp.

The anaerobic digestion of animal fleshing from tannery solid waste was investigated with regard to hydrolytic enzymes, protease and lipase, fermentative enzyme deaminase, soluble protein and amino acids, redox potential (Eh), volatile fatty acids, ammonia and carbon dioxide up to 120 h of retention time. The release of these fermentation metabolites at various retention times greatly influenced the Eh. In the hydrolytic phase, the maximum value of Eh was ?50 mV and it reached the minimum of ?350 mV in 24 h in the fermentative phase. The minimum and maximum values of Eh were ?387 and ?452 mV at 80 h of anaerobic digestion. The release of extracellular metabolites was confirmed by HPLC and GC‐MS. In this study, we have found that the ammonia and pH had a substantial influence on the Eh during the anaerobic digestion of animal fleshing.     

Rapid start-up of thermophilic anaerobic digestion with the turf fraction of MSW as inoculum

This study aims to determine suitable start-up conditions and inoculum sources for thermophilic anaerobic digestion. Within days of incubation MSW at 55 °C, methane was produced at a high rate. In an attempt to narrow down which components of typical MSW contained the thermophilic methanogens, vacuum cleaner dust, banana peel, kitchen waste, and garden waste were tested as inoculum for thermophilic methanogenesis with acetate as the substrate. Results singled out grass turf as the key source of thermophilic acetate degrading methanogenic consortia. Within 4 days of anaerobic incubation (55 °C), anaerobically incubated grass turf samples produced methane accompanied by acetate degradation enabling successful start-up of thermophilic anaerobic digestion. Other essential start-up conditions are specified. Stirring of the culture was not conducive for successful start-up as it resulted specifically in propionate accumulation.     

Three-reaction model for the anaerobic digestion of microalgae

Coupling an anaerobic digester to a microalgal culture has received increasing attention as an alternative process for combined bioenergy production and depollution. In this article, a dynamic model for anaerobic digestion of microalgae is developed with the aim of improving the management of such a coupled system. This model describes the dynamics of inorganic nitrogen and volatile fatty acids since both can lead to inhibition and therefore process instability. Three reactions are considered: Two hydrolysis–acidogenesis steps in parallel for sugars/lipids and for proteins, followed by a methanogenesis step. The proposed model accurately reproduces experimental data for anaerobic digestion of the freshwater microalgae Chlorella vulgaris with an organic loading rate of 1 gCOD L^?1 d^?1. In particular, the three‐reaction pathway allows to adequately represent the observed decoupling between biogas production and nitrogen release. The reduced complexity of this model makes it suitable for developing advanced, model‐based control and monitoring strategies. Biotechnol. Bioeng. 2012; 109:415–425. © 2011 Wiley Periodicals, Inc.     

Alternative methods for determining anaerobic biodegradability: A review

The characterization of solid wastes is a necessary step before they can be used in anaerobic digestion. The quantities of different compounds (carbohydrates, proteins, lipids and fibers) and anaerobic biodegradability (capacity to produce methane) are important information required to characterize waste. The Biochemical Methane Potential (BMP) test is one of the most relevant tests for assessing the biodegradability of waste materials. The BMP test is run under anaerobic conditions, using bacteria populations, which makes it very time consuming, i.e., about 30 days. This paper presents alternative methods for determining the anaerobic biodegradability of solid waste. First, we describe the already existing tests for characterizing organic matter. Then we correlate an aerobic test with an anaerobic test in order to estimate anaerobic biodegradability and biogas production. This shortens the analysis time to 5 days. Models using physico-chemical characteristics as input data (total carbohydrate, total nitrogen, fiber, etc.) can predict the amount of methane produced by correlation. Pyrolysis is a very fast analytical test that can be used to characterize solid waste. Lastly, spectroscopy techniques seem to be useful for determining biodegradability, in particular by taking into account the interaction between different molecules in the organic matter.     

Enhanced biomethanation of kitchen waste by different pre-treatments

Five different pre-treatments were investigated to enhance the solubilisation and anaerobic biodegradability of kitchen waste (KW) in thermophilic batch and continuous tests. In the batch solubilisation tests, the highest and the lowest solubilisation efficiency were achieved with the thermo-acid and the pressure-depressure pre-treatments, respectively. However, in the batch biodegradability tests, the highest cumulative biogas production was obtained with the pressure-depressure method. In the continuous tests, the best performance in terms of an acceptable biogas production efficiency of 60% and stable in-reactor COD_s and VFA concentrations corresponded to the pressure-depressure reactor, followed by freeze-thaw, acid, thermo-acid, thermo and control. The maximum OLR (5 g COD L⁻¹ d⁻¹) applied in the pressure-depressure and freeze-thaw reactors almost doubled the control reactor. From the overall analysis, the freeze-thaw pre-treatment was the most profitable process with a net potential profit of around 11.5 € ton⁻¹ KW.     

Acidogenic fermentation of proteinaceous solid waste and characterization of different bioconversion stages and extracellular products

The purpose of this study was to investigate hydrolysis of animal fleshing (ANFL), a predominant tannery solid waste and to characterize the acetogenic fermentation products of anaerobic digestion. The acidogenic digestibility of the tannery solid wastes were evaluated up to 120 h using batch anaerobic digestion tests performed under mesophilic condition at 37 degrees C. The degradation of ANFL starts with non-fibrillar proteins and proceeds with fibrillar proteins. The release of aliphatic amino acid in the early stages of hydrolysis (24 h) and followed by aromatic amino acids (24-72 h) were evidenced by HPLC analysis. The maximum production of propionic and valeric acid were observed in 72 h followed by rapid increase in acetic acid in 96 h using GC-MS. Breakdown of ANFL and formations of other metabolites were evidenced by FT-IR and (1)H-NMR spectroscopy.     

Anaerobic digestion of source-segregated domestic food waste: Performance assessment by mass and energy balance

An anaerobic digester receiving food waste collected mainly from domestic kitchens was monitored over a period of 426 days. During this time information was gathered on the waste input material, the biogas production, and the digestate characteristics. A mass balance accounted for over 90% of the material entering the plant leaving as gaseous or digestate products. A comprehensive energy balance for the same period showed that for each tonne of input material the potential recoverable energy was 405 kWh. Biogas production in the digester was stable at 642 m³ tonne⁻¹ VS added with a methane content of around 62%. The nitrogen in the food waste input was on average 8.9 kg tonne⁻¹. This led to a high ammonia concentration in the digester which may have been responsible for the accumulation of volatile fatty acids that was also observed.     

Production and characterization of β-glucosidase from Aspergillus niger fermentation: Application for organic fraction of municipal solid waste hydrolysis and methane enhancement

The anaerobic digestion of the organic fraction of municipal solid waste (OFMSW) is currently an attractive treatment process with energy production in the form of biogas. Hydrolysis is the rate-limiting step for the anaerobic digestion of solid wastes. Thus, in the present study fungal enzymatic pretreatment of OFMSW was applied to enhance biogas production. Two enzyme cocktails rich on β-glucosidase were produced from submerged fermentation of Aspergillus niger on basal medium using OFMSW as carbon source and urea (Urea cocktail) and Ulva rigida as nitrogen source (Ulva cocktail). Ulva cocktail displayed an important effect on OFMSW solubilization. Therefore, an increase of reducing sugar concentration about 60% was obtained which was in correlation with chemical oxygen demand (COD) increase. The performance of enzymatic pretreatment on anaerobic digestion of OFMSW was studied by conducting biochemical methane potential tests. Results showed that the enzymatic pretreatment improved methane yield of OFMSW even at high solid concentration. High methane yield about 500 ml/g total volatile solid was obtained, which corresponds up to 68% enhancement over the control.