Stimulating effect of both 4’‐O‐methylnorbelladine feeding and temporary immersion conditions on galanthamine and lycorine production by Leucojum aestivum L. bulblets

Bulb cultures of Leucojum aestivum and L. aestivum ‘Gravety Giant’ were subcultured in medium containing the precursor 4’‐O‐methylnorbelladine (MN) at various concentrations [0 (control), 0.15 and 0.3 g/L]. The cultures were conducted in bioreactor RITA® and lasted for 15, 30, 40 and 50 days. The growth rate and the alkaloid accumulation in bulblets were studied. For this latter purpose, a purification method was developed. It comprised a highly selective solid phase extraction using on the one hand, UPTI‐CLEAN SI and SCX cartridges for plant extracts and on the other hand, 2H cartridges for culture media. Pure alkaloidal fractions were, thus, analyzed by LC‐ESI‐MS allowing the quantitative evaluation of galanthamine and lycorine from culture extracts. Precursor feeding along with temporary immersion conditions was found to significantly improve the accumulation of both galanthamine and lycorine. The maximal concentrations of galanthamine (0.81 mg/g DW) and lycorine (0.54 mg/g DW) in L. aestivum bulblets were reached, respectively, after 40 days of culture with 0.15 g/L of precursor and after 30 days of culture with 0.3 g/L of precursor. In L. aestivum ‘Gravety Giant’ bulb cultures, 0.3 g/L of precursor was the best condition for both galanthamine (0.6 mg/g DW after 50 days) and lycorine (1.13 mg/g DW after 30 days).     

Kinetic modeling of lipase‐catalyzed esterification reaction between oleic acid and trimethylolpropane: A simplified model for multi‐substrate multi‐product ping–pong mechanisms

Kinetic models are among the tools that can be used for optimization of biocatalytic reactions as well as for facilitating process design and upscaling in order to improve productivity and economy of these processes. Mechanism pathways for multi‐substrate multi‐product enzyme‐catalyzed reactions can become very complex and lead to kinetic models comprising several tens of terms. Hence the models comprise too many parameters, which are in general highly correlated and their estimations are often prone to huge errors. In this study, Novozym^®435 catalyzed esterification reaction between oleic acid (OA) and trimethylolpropane (TMP) with continuous removal of side‐product (water) was carried out as an example for reactions that follow multi‐substrate multi‐product ping‐pong mechanisms. A kinetic model was developed based on a simplified ping‐pong mechanism proposed for the reaction. The model considered both enzymatic and spontaneous reactions involved and also the effect of product removal during the reaction. The kinetic model parameters were estimated using nonlinear curve fitting through unconstrained optimization methodology and the model was verified by using empirical data from different experiments and showed good predictability of the reaction under different conditions. This approach can be applied to similar biocatalytic processes to facilitate their optimization and design. © 2013 American Institute of Chemical Engineers Biotechnol. Prog., 29:1422–1429, 2013     

Microwave‐assisted covalent immobilization of enzymes on inorganic surfaces

Enzymes on carriers can be easily recycled or used in fixed bed reactors. The immobilization often results in an improved stability. Depending on the support used and the method of coupling, this is a time‐consuming process. While the wide applicability of microwaves (MWs) within organic synthesis is known since the 1980s, proteins (including enzymes) are generally considered as too sensitive toward MW irradiation. In this article, MW methods were investigated to improve the processing speed of covalent enzyme immobilization on inorganic supports. Herein two laccases from Trametes versicolor and Myceliophthora thermophilia (Novozyme 51003®) and the glucose oxidase from Aspergillus niger were immobilized onto samples of ceramic honeycomb and porous glass (TRISOPERL® 1000 AMINO). The enzymes showed different sensitivity to MW irradiation, but all were suitable for MW‐assisted immobilization. Subsequent stability tests were conducted to compare conventional immobilization methods with those with MW irradiation. The glucose oxidase provided the best results. For all cases, a successful MW irradiation assisted covalent enzyme immobilization on solid support was obtained with a total 20‐fold reduction of the time necessary.     

The role of hair follicle nestin‐expressing stem cells during whisker sensory‐nerve growth in long‐term 3D culture

We have previously reported that nestin‐expressing hair follicle stem cells can differentiate into neurons, Schwann cells, and other cell types. In the present study, vibrissa hair follicles, including their sensory nerve stump, were excised from transgenic mice in which the nestin promoter drives green fluorescent protein (ND‐GFP mice), and were placed in 3D histoculture supported by Gelfoam®. β‐III tubulin‐positive fibers, consisting of ND‐GFP‐expressing cells, extended up to 500 µm from the whisker nerve stump in histoculture. The growing fibers had growth cones on their tips expressing F‐actin. These findings indicate that β‐III tubulin‐positive fibers elongating from the whisker follicle sensory nerve stump were growing axons. The growing whisker sensory nerve was highly enriched in ND‐GFP cells which appeared to play a major role in its elongation and interaction with other nerves in 3D culture, including the sciatic nerve, the trigeminal nerve, and the trigeminal nerve ganglion. The results of the present report suggest a major function of the nestin‐expressing stem cells in the hair follicle is for growth of the follicle sensory nerve. J. Cell. Biochem. 114: 1674–1684, 2013. © 2013 Wiley Periodicals, Inc.     

One year later: evaluation of PMC‐recommended births and transfers

To meet their exhibition, conservation, education, and scientific goals, members of the American Zoo and Aquarium Association (AZA) collaborate to manage their living collections as single species populations. These cooperative population management programs, Species Survival Plans^® (SSP) and Population Management Plans (PMP), issue specimen‐by‐specimen recommendations aimed at perpetuating captive populations by maintaining genetic diversity and demographic stability. Species Survival Plans and PMPs differ in that SSP participants agree to complete recommendations, whereas PMP participants need only take recommendations under advisement. We evaluated the effect of program type and the number of participating institutions on the success of actions recommended by the Population Management Center (PMC): transfers of specimens between institutions, breeding, and target number of offspring. We analyzed AZA studbook databases for the occurrence of recommended or unrecommended transfers and births during the 1‐year period after the distribution of standard AZA Breeding‐and‐Transfer Plans. We had three major findings: 1) on average, both SSPs and PMPs fell about 25% short of their target; however, as the number of participating institutions increased so too did the likelihood that programs met or exceeded their target; 2) SSPs exhibited significantly greater transfer success than PMPs, although transfer success for both program types was below 50%; and 3) SSPs exhibited significantly greater breeding success than PMPs, although breeding success for both program types was below 20%. Together, these results indicate that the science and sophistication behind genetic and demographic management of captive populations may be compromised by the challenges of implementation. Zoo Biol 0:1–11, 2006. © 2006 Wiley‐Liss, Inc.     

Characterisation of Phenolics in Flor‐Essence®—a Compound Herbal product and its Contributing Herbs

Introduction – Commercially available herbal mixture FE, a proprietary natural health product manufactured by Flora Manufacturing and Distributing Ltd (Flora), is a unique North American traditional herbal product. FE is a chemically complex mixture of eight herbs and has not been subjected to phytochemical analysis. Objective – To develop analytical methods to undertake detailed phytochemical analyses of FE, and its eight contributing herbs, including burdock (Arctium lappa L.), sheep sorrel (Rumex acetosella L.), Turkish rhubarb (Rheum palmatum L.), slippery elm Muhl. (Ulmus rubra), watercress (Nasturtium officinale R. Br.), red clover (Trifolium pratense L.), blessed thistle (Cnicus benedictus L.) and kelp (Laminaria digitata Lmx.). Methodology – The identification was undertaken by a combination of reversed phase high performance liquid chromatography–diode array detection–atmospheric pressure chemical ionisation–mass selective detection (RP‐HPLC‐DAD‐APCI‐MSD) analysis and phenolics metabolomic library matching. Results – New separation methods facilitated the identification of 43 markers in the individual herbs which constitute FE. Sixteen markers could be identified in FE originating from four contributing herbs including four caffeoyl quinic acids, three dicaffeoyl quinic acids and two caffeic acid derivatives from A. lappa, luteolin‐7‐O‐glucoside, luteolin, five apigenin glycosides and apigenin from R. acetocella and N. officinale and sissostrin from T. pretense. A validated method for quantitative determination of three markers is reported with good intraday, interday and interoperator repeatability using a reliable alcohol based extraction technique. Conclusion – FE and its contributing herbs predominantly contain phenolics. This methodology can be applied to further develop full‐scale validation of this product. Copyright © 2009 John Wiley & Sons, Ltd.     

Capturing of cell culture‐derived modified Vaccinia Ankara virus by ion exchange and pseudo‐affinity membrane adsorbers

Smallpox is an acute, highly infectious viral disease unique to humans, and responsible for an estimated 300–500 million deaths in the 20th century. Following successful vaccination campaigns through the 19th and 20th centuries, smallpox was declared eradicated by the World Health Organization in 1980. However, the threat of using smallpox as a biological weapon prompted efforts of some governments to produce smallpox vaccines for emergency preparedness. An additional aspect for the interest in smallpox virus is its potential use as a platform technology for vector vaccines. In particular, the latter requires a high safety level for routine applications. IMVAMUNE®, a third generation smallpox vaccine based on the attenuated Modified Vaccinia Ankara (MVA) virus, demonstrates superior safety compared to earlier generations and represents therefore an interesting choice as viral vector. Current downstream production processes of Vaccinia virus and MVA are mainly based on labor‐intensive centrifugation and filtration methods, requiring expensive nuclease treatment in order to achieve sufficient low host‐cell DNA levels for human vaccines. This study compares different ion exchange and pseudo‐affinity membrane adsorbers (MA) to capture chicken embryo fibroblast cell‐derived MVA‐BN® after cell homogenization and clarification. In parallel, the overall performance of classical bead‐based resin chromatography (Cellufine® sulfate and Toyopearl® AF‐Heparin) was investigated. The two tested pseudo‐affinity MA (i.e., sulfated cellulose and heparin) were superior over the applied ion exchange MA in terms of virus yield and contaminant depletion. Furthermore, studies confirmed an expected increase in productivity resulting from the increased volume throughput of MA compared to classical bead‐based column chromatography methods. Overall virus recovery was ～60% for both pseudo‐affinity MA and the Cellufine® sulfate resin. Depletion of total protein ranged between 86% and 102% for all tested matrices. Remaining dsDNA in the product fraction varied between 24% and 7% for the pseudo‐affinity chromatography materials. Cellufine® sulfate and the reinforced sulfated cellulose MA achieved the lowest dsDNA product contamination. Finally, by a combination of pseudo‐affinity with anion exchange MA a further reduction of host‐cell DNA was achieved. Biotechnol. Bioeng. 2010. 105: 761–769. © 2009 Wiley Periodicals, Inc.     

Efficacy of a micro‐encapsulated formulation compared with a sticky barrier for excluding ants from citrus canopies

Inesfly IGR FITO^® is an insecticidal paint containing chlorpyrifos and pyriproxyfen incorporated in a micro‐encapsulated formulation that confers the advantage of releasing active ingredients slowly. In this study, a 15‐cm band of Inesfly IGR FITO^® was painted around citrus trunks. The efficacy of this paint and a sticky barrier to exclude ants from foraging in citrus trees was evaluated in two citrus orchards during the season in two different ant communities, one dominated by Lasius grandis and the other by Linepithema humile. Field results demonstrated that a single application of Inesfly IGR FITO^® at the beginning of the season was highly effective in excluding ants from canopies throughout the season. Inesfly IGR FITO^® provides an efficient and more economical alternative than current ant exclusion strategies used in many perennial crops. Further studies should be performed to determine the effects of this strategy on other pests and on beneficial arthropods in citrus.     

Packing of large‐scale chromatography columns with irregularly shaped glass based resins using a stop‐flow method

Rigid chromatography resins, such as controlled pore glass based adsorbents, offer the advantage of high permeability and a linear pressure‐flow relationship irrespective of column diameter which improves process time and maximizes productivity. However, the rigidity and irregularly shaped nature of these resins often present challenges in achieving consistent and uniform packed beds as formation of bridges between resin particles can hinder bed consolidation. The standard flow‐pack method when applied to irregularly shaped particles does not yield well‐consolidated packed beds, resulting in formation of a head space and increased band broadening during operation. Vibration packing methods requiring the use of pneumatically driven vibrators are recommended to achieve full packed bed consolidation but limitations in manufacturing facilities and equipment may prevent the implementation of such devices. The stop‐flow packing method was developed as an improvement over the flow‐pack method to overcome these limitations and to improve bed consolidation without the use of vibrating devices. Transition analysis of large‐scale columns packed using the stop‐flow method over multiple cycles has shown a two‐ to three‐fold reduction of change in bed integrity values as compared to a flow‐packed bed demonstrating an improvement in packed bed stability in terms of the height equivalent to a theoretical plate (HETP) and peak asymmetry (A_s). © 2014 American Institute of Chemical Engineers Biotechnol. Prog., 30:1319–1325, 2014     

A rotating bed system bioreactor enables cultivation of primary osteoblasts on well‐characterized sponceram® regarding structural and flow properties

The development of bone tissue engineering depends on the availability of suitable biomaterials, a well‐defined and controlled bioreactor system, and on the use of adequate cells. The biomaterial must fulfill chemical, biological, and mechanical requirements. Besides biocompatibility, the structural and flow characteristics of the biomaterial are of utmost importance for a successful dynamic cultivation of osteoblasts, since fluid percolation within the microstructure must be assured to supply to cells nutrients and waste removal. Therefore, the biomaterial must consist of a three‐dimensional structure, exhibit high porosity and present an interconnected porous network. Sponceram®, a ZrO₂ based porous ceramic, is characterized in the presented work with regard to its microstructural design. Intrinsic permeability is obtained through a standard Darcy's experiment, while Young's modulus is derived from a two plates stress–strain test in the linear range. Furthermore, the material is applied for the dynamic cultivation of primary osteoblasts in a newly developed rotating bed bioreactor. © 2010 American Institute of Chemical Engineers Biotechnol. Prog., 2010     

Comparison of solid‐phase cytometry and the plate count method for the evaluation of the survival of bacteria in pharmaceutical oils

Aim: To compare the survival of four bacterial strains (Escherichia coli, Proteus mirabilis, Staphylococcus aureus, Pseudomonas aeruginosa) in pharmaceutical oils, including jojoba oil/tea tree oil, carbol oil, jojoba oil and sesame oil. Methods and Results: Oils were spiked with the test bacteria in a concentration of 10⁴ CFU ml^?1. Bacteria were extracted from oils with phosphate‐buffered saline containing 0·5% Tween 20. Aliquots of the pooled water layers were analysed by solid‐phase cytometry and plate counting. Plate counts dropped to zero for all test strains exposed for 24 h to three of the four oils. In contrast, significant numbers of viable cells were still detected by SPC, except in the jojoba oil/tea tree oil mixture and partly in sesame oil. Conclusions: Exposure of bacteria for 24 h to the two oils containing an antimicrobial led to a loss of their culturability but not necessarily of their viability. The antibacterial activity of the jojoba oil/tea tree oil mixture supersedes that of carbol oil. Significance and Impact of the Study: These in vitro data suggest that the jojoba oil/tea tree oil mixture more than carbol oil inhibits bacterial proliferation when used for intermittent self‐catherization.     

Six‐membered cyclic carbonates from trimethylolpropane: Lipase‐mediated synthesis in a flow reactor and in silico evaluation of the reaction

Six‐membered cyclic carbonates with hydroxyl and methoxycarbonyloxy functional groups were prepared by transesterification of trimethylolpropane (TMP) with dimethylcarbonate (DMC) by solvent‐free lipase‐mediated flow reaction followed by thermal cyclization. The flow reaction efficiency was evaluated using different configurations of reactor consisting of packed beds of Novozym®435 (immobilized Candida antarctica lipase B—CalB—a.k.a. N435) and molecular sieves, flowrate, and biocatalyst loads. The mixed column of the biocatalyst and molecular sieves, allowing rapid and efficient removal of the by‐product—methanol—was the most efficient setup. Higher conversion (81.6%) in the flow reaction compared to batch process (72%) was obtained using same amount of N435 (20% (w/w) N435:TMP) at 12 h, and the undesirable dimer and oligomer formation were suppressed. Moreover, the product was recovered easily without extra separation steps, and the biocatalyst and the molecular sieves remained intact for subsequent regeneration and recycling. The reaction of CalB with DMC and the primary transesterification product, monocarbonated TMP, respectively, as acyl donors was evaluated by in silico modeling and empirically to determine the role of the enzyme in the formation of cyclic carbonates and other side products. DMC was shown to be the preferred acyl donor, suggesting that TMP and its carbonated derivatives serve only as acyl acceptors in the lipase‐catalyzed reaction. Subsequent cyclization to cyclic carbonate is catalyzed at increased temperature and not by the enzyme. © 2016 American Institute of Chemical Engineers Biotechnol. Prog., 33:375–382, 2017     

Sexual rest and post‐meiotic sperm ageing in house mice

Fertilization by aged sperm can result in adverse fitness consequences for both males and females. Sperm storage during male sexual rest could provide an environment for post‐meiotic sperm senescence causing a deterioration in the quality of stored sperm, possibly impacting on both sperm performance (e.g. swimming ability) and DNA quality. Here, we compared the proportion of sperm with fragmented DNA, an indicator of structural damage of DNA within the sperm cell, among males that had been sexually rested for approximately 2 months, to that of males that had mated recently. We found no evidence of intra‐epididymal sperm DNA damage or any impairment in sperm performance, and consequently no evidence of post‐meiotic sperm senescence. Our results suggest that male house mice are likely to possess mechanisms that function to ensure that their sperm reserves remain stocked with ‘young’, viable sperm during periods of sexual inactivity. We also discuss the possibility that our experimental design leads to no difference in the age of sperm among males from the two mating treatments. Post‐meiotic sperm senescence is especially relevant under sperm competition. Thus, we sourced mice from populations that differed in their levels of post‐copulatory sexual selection, enabling us to gain insight into how selection for higher sperm production influences the rate of sperm ageing and levels of DNA fragmentation. We found that males from the population that produced the highest number of sperm also had the smallest proportion of DNA‐fragmented sperm and discuss this outcome in relation to selection acting upon males to ensure that they produce ejaculates with high‐quality sperm that are successful in achieving fertilizations under competitive conditions.