Anatomy of the replication origin of plasmid ColE2-P9

The plasmid ColE2-P9 origin is a 32-bp region which is specifically recognized by the plasmid-specified Rep protein to initiate DNA replication. We analyzed the structural and functional organization of the ColE2 origin by using various derivatives carrying deletions and single-base-pair substitutions. The origin may be divided into three subregions: subregion I, which is important for stable binding of the Rep protein; subregion II, which is important for binding of the Rep protein and for initiation of DNA replication; and subregion III, which is important for DNA replication but apparently not for binding of the Rep protein. The Rep protein might recognize three specific DNA elements in subregions I and II. The relative transformation frequency of the autonomously replicating plasmids carrying deletions in subregion I is lower, and nevertheless the copy numbers of these plasmids in host bacteria are higher than those of the wild-type plasmid. Efficient and stable binding of the Rep protein to the origin might be important for the replication efficiency to be at the normal (low) level. Subregion II might be essential for interaction with the catalytic domain of the Rep protein for primer RNA synthesis. The 8-bp sequence across the border of subregions II and III, including the primer sequence, is conserved in the (putative) origins of many plasmids, the putative Rep proteins of which are related to the ColE2-P9 Rep protein. Subregion III might be required for a step that is necessary after Rep protein binding has taken place.     

Specific interaction between the initiator protein (Rep) and origin of plasmid ColE2-P9

The replication initiator protein (Rep) of plasmid ColE2-P9 (ColE2) is multifunctional. We are interested in how Rep binds to the origin (Ori) to perform various functions. We used the wild type and variants of Rep to study the Rep-Ori interaction by both in vitro and in vivo approaches, including biochemical analyses of protein-DNA interactions and an in vivo replication assay. We identified three regions (I, II, and III) of Rep, located in the C-terminal half, and three corresponding binding sites (I, II, and III) in Ori which are important for Rep-Ori interaction. We showed that region I, containing a putative helix-turn-helix motif, is necessary and sufficient for specific Ori recognition, interacting with site I of the origin DNA from the major groove. Region II interacts with site II of the origin DNA, from the adjacent minor groove in the left half of Ori, and region III interacts with site III, next to the template sequence for primer synthesis, which is one and one-half turn apart from site I on the opposite surface of the origin DNA. A putative linker region located between the two DNA binding domains (regions II and III) was identified, which might provide Rep an extended conformation suitable for binding to the two separate sites in Ori. Based on the results presented in this paper, we propose a model for Rep-Ori interaction in which Rep binds to Ori as a monomer.     

Distinct functions of the two specificity determinants in replication initiation of plasmids ColE2-P9 and ColE3-CA38

The plasmid ColE2-P9 Rep protein specifically binds to the cognate replication origin to initiate DNA replication. The replicons of the plasmids ColE2-P9 and ColE3-CA38 are closely related, although the actions of the Rep proteins on the origins are specific to the plasmids. The previous chimera analysis identified two regions, regions A and B, in the Rep proteins and two sites, alpha and beta, in the origins as specificity determinants and showed that when each component of the region A-site alpha pair and the region B-site beta pair is derived from the same plasmid, plasmid DNA replication is efficient. It is also indicated that the replication specificity is mainly determined by region A and site alpha. By using an electrophoretic mobility shift assay, we demonstrated that region B and site beta play a critical role for stable Rep protein-origin binding and, furthermore, that 284-Thr in this region of the ColE2 Rep protein and the corresponding 293-Trp of the ColE3 Rep protein mainly determine the Rep-origin binding specificity. On the other hand, region A and site alpha were involved in the efficient unwinding of several nucleotide residues around site alpha, although they were not involved in the stable binding of the Rep protein to the origin. Finally, we discussed how the action of the Rep protein on the origin involving these specificity determinants leads to the plasmid-specific replication initiation.     

The effects of RNA degradation enzymes on antisense RNAI controlling ColE2 plasmid copy number

Replication of the ColE2 plasmid requires a plasmid-coded initiator protein (Rep). Rep expression is controlled by antisense RNA (RNAI), which prevents the Rep mRNA translation. In this paper, we examined the effects of RNA degradation enzymes on the degradation pathways of RNAI of the ColE2 plasmid. In the DeltapcnB strain lacking the poly(A) polymerase I (PAP I) the RNAI degradation intermediate (RNAI(*)) accumulates much more than that in the wt strain. RNAI(*) is produced by the RNase E cleavage. RNase II and PNPase are involved in further degradation of RNAI(*) and PAP I is necessary for efficient degradation. The degradation process of ColE2 RNAI is similar to those of R1 CopA RNA and ColE1 RNAI, although the nucleotide sequences and fine secondary structures of these three RNAs are different. ColE2 RNAI is cleaved at multiple positions in the 5' end region by RNase E. The degradation pathway of ColE2 RNAI shown here is quite different from that of the ColE2 Rep mRNA which we have previously reported. In the DeltapcnB strain used for RNA analysis the copy number of the ColE2 plasmid decreases to about a half as compared with that in the isogenic wt strain.     

Replication initiator protein mRNA of ColE2 plasmid and its antisense regulator RNA are under the control of different degradation pathways

Replication of the ColE2 plasmid requires a plasmid-coded initiator protein (Rep). Rep expression is controlled by antisense RNA (RNAI) against the Rep mRNA at a translational step. In this paper, we examined the effects of host RNA degradation enzymes on the degradation process of the Rep mRNA and its degradation intermediates especially those carrying the 5' untranslated region. We showed that the Rep mRNA is subjected to complex degradation pathways involving at least RNase I, RNase II, RNase III, RNase E, RNase G and PNPase. RNase II acts as a major exoribonuclease and PNPase plays a minor role. We also showed that the PcnB (polyA polymerase I) plays only a minor role in the Rep mRNA degradation process. The RNA degradation pathways of the Rep mRNA and RNAI of the ColE2 plasmid are quite different. Based on these results, we speculate that the ColE2 Rep mRNA and RNAI are endowed with individual RNA half lives required for the efficient copy number control by being subjected to different RNA degradation systems.     

Primer RNA synthesis by plasmid-specified Rep protein for initiation of ColE2 DNA replication.

Initiation of in vitro ColE2 DNA replication requires the plasmid-specified Rep protein and DNA polymerase I but not RNA polymerase and DnaG primase. The ColE2 Rep protein binds specifically to the origin where replication initiates. Leading-strand synthesis initiates at a unique site in the origin and lagging-strand DNA synthesis terminates at another unique site in the origin. Here we show that the primer RNA for leading-strand synthesis at the origin has a unique structure of 5'-ppApGpA. We reconstituted the initiation reaction of leading-strand DNA synthesis by using purified proteins, the ColE2 Rep protein, Escherichia coli DNA polymerase I and SSB, and we showed that the ColE2 Rep protein is a priming enzyme, primase, which is specific for the ColE2 origin. The ColE2 Rep protein is unique among other primases in that it recognizes the origin region and synthesizes the primer RNA at a fixed site in the origin region. Specific requirement for ADP as a substrate and its direct incorporation into the 5' end of the primer RNA are also unique properties of the ColE2 Rep protein.     

The ColE2-P9 Rep protein binds to the origin DNA as a monomer

The Rep proteins of some plasmid replicons have two functions. Dimers bind to the operator sequences acting as auto-repressors, whereas monomers bind to the iterons to initiate replication of DNA. The ColE2 Rep proteins are present mostly in a dimeric form with some multimers larger than dimers in solution, while the form of Rep binding to Ori is not known. We used an EMSA-based method to determine the molecular weight of Rep in the Rep-Ori complex. The result suggested that Rep binds to Ori as a monomer. In addition, the result of EMSA using the Rep protein fused with the maltose binding protein and the His6-tag also supported this conclusion. We proposed that dimerization of Rep might probably be involved in keeping the copy number of the ColE2 plasmid at the normal low level by limiting the amount of active monomeric forms of Rep in the host cell.     

Initiation of unidirectional ColE2 DNA replication by a unique priming mechanism.

The ColE2 DNA can be replicated in an in vitro system consisting of a crude extract of Escherichia coli cells. DNA synthesis requires a plasmid-coded protein (Rep) and host DNA polymerase I but not host RNA polymerase. Replication starts at a fixed region containing the origin and proceeds unidirectionally. The leading- and lagging-strand DNA fragments synthesized around the origin were identified from early replicative intermediates. The 5' end of the leading-strand DNA fragment was mapped at a unique position in the minimal origin and carried RNA of a few residues. The results suggested that the initiation of the leading-strand DNA synthesis does not require the host DnaG protein. Thus the Rep protein itself seems to be a primase. Synthesis of the primer RNA at a fixed site in the origin region on a double-stranded DNA template is a unique property of the ColE2 Rep protein among other known primases. The 3' end of the lagging-strand DNA fragment was mapped at a unique position just at the end of the minimal origin region. Termination of the lagging-strand DNA fragment at that position seems to be the mechanism of the unidirectional replication of ColE2 plasmid.     

Replication of ColE2 and ColE3 plasmids In vitro replication dependent on plasmid-coded proteins

Summary We developed an in vitro replication system for ColE2 and ColE3 plasmids using cell extracts prepared from bacteria with or without these plasmids. DNA synthesis depended on host DNA polymerase I and was sensitive to rifampicin and chloramphenicol. Preincubation of the extracts with plasmid DNA, however, allowed replication of template DNA added subsequently in a plasmid-specific manner in the presence of rifampicin and chloramphenicol. The plasmid-specified trans-acting factor(s) was detected in cell extracts from bacteria carrying a recombinant plasmid with the region of ColE2 or ColE3 encoding the Rep protein. The plasmid-specified factor(s) consisted at least in part of protein, probably the Rep protein. In vitro replication started within a region of ColE2 or ColE3 containing the smallest cis-acting segment essential for in vivo replication and proceeded in a fixed direction.     

Structural and functional organization of ColE2 and ColE3 replicons

Summary The complete nucleotide sequences of the 1.5 kb regions of ColE2 and ColE3 plasmids containing the segments sufficient for autonomous replication have been determined. They are quite homologous (greater than 90%), indicating that these two plasmids share common mechanisms of initiation of replication and its regulation. An open reading frame with a coding capacity for a protein of about 300 amino acids is present in both ColE2 and ColE3 and it actually specifies the Rep (for replication) protein, which is the plasmid specific trans-acting factor required for autonomous replication. The amino acid sequences of the Rep proteins of ColE2 and ColE3 are quite homologous (greater than 90%). The cis-acting sites (origins) where replication initiates in the presence of the trans-acting factors consist of 32 bp for ColE2 and 33 bp for ColE3. They are the smallest of all the prokaryotic replication origins so far reported. They are nonhomologous only at two positions, one of which, a deletion of a single nucleotide in ColE2 (or an insertion in ColE3), determines the plasmid specificity in interaction of the origins with the Rep proteins. Both plasmids carry a region with an identical nucleotide sequence and the one in ColE2, the IncA region, has been shown to express incompatibility against both ColE2 and ColE3. These results indicate that these plasmids share a common IncA determinant. A possibility that a small antisense RNA is involved in copy number control and incompatibility (IncA function) was suggested.     

Comparative analysis of the replicon regions of eleven ColE2-related plasmids.

The incA gene product of ColE2-P9 and ColE3-CA38 plasmids is an antisense RNA that regulates the production of the plasmid-coded Rep protein essential for replication. The Rep protein specifically binds to the origin and synthesizes a unique primer RNA at the origin. The IncB incompatibility is due to competition for the Rep protein among the origins of the same binding specificity. We localized the regions sufficient for autonomous replication of 15 ColE plasmids related to ColE2-P9 and ColE3-CA38 (ColE2-related plasmids), analyzed their incompatibility properties, and determined the nucleotide sequences of the replicon regions of 9 representative plasmids. The results suggest that all of these plasmids share common mechanisms for initiation of DNA replication and its control. Five IncA specificity types, 4 IncB specificity types, and 9 of the 20 possible combinations of the IncA and IncB types were found. The specificity of interaction of the Rep proteins and the origins might be determined by insertion or deletion of single nucleotides and substitution of several nucleotides at specific sites in the origins and by apparently corresponding insertion or deletion and substitution of amino acid sequences at specific regions in the C-terminal portions of the Rep proteins. For plasmids of four IncA specificity types, the nine-nucleotide sequences at the loop regions of the stem-loop structures of antisense RNAs are identical, suggesting an evolutionary significance of the sequence. The mosaic structures of the replicon regions with homologous and nonhomologous segments suggest that some of them were generated by exchanging functional parts through homologous recombination.     

Identification of a plasmid-coded protein required for initiation of ColE2 DNA replication.

The product of the rep gene of ColE2 is required for initiation of ColE2 DNA replication. The rep gene was placed under the control of the promoters, PL and PR, and the heat-labile cl857 repressor of bacteriophage lambda. The Rep protein was identified as a 35 Kd protein by the maxicell method in combination with heat-induced expression. The protein was efficiently expressed from these promoters in unirradiated cells and accumulated up to a few per cent of the total cellular proteins. It was partially purified (about 80% pure) and its properties examined. The amino acid sequence of the amino terminal portion of the partially purified protein agreed well with that predicted from the nucleotide sequence of the rep gene. One of the characteristic features of the rep gene is frequent usage of rare codons, especially those for arginine. The protein specifically stimulated replication of ColE2 DNA but not that of ColE3 DNA in crude cell extracts of Escherichia coli. Specific binding of the protein to plasmid DNA containing the origin region of ColE2 was demonstrated by the filter binding method. Neither endonuclease activity nor topoisomerase activity was detected by using ColE2 DNA.     

Replication origin mutations affecting binding of pSC101 plasmid-encoded Rep initiator protein.

To investigate the role of binding sites for Rep initiation protein in the replication of pSC101, a series of plasmids was constructed which carried different combinations of mutations in three binding sites within the minimal origin of replication. Mutation of all three sites reduced the affinity of purified Rep protein for the origin by 100-fold, as measured by a competition binding assay. Mutations in individual binding sites prevented binding of Rep protein to the mutant site but not to adjacent wild-type sites. Transformation efficiency, copy number, and stability over 150 generations were measured for each of the mutant plasmids. Unlike other similar plasmids related to pSC101, the Rep binding sites were found not to be equivalent. A mutation in the site RS1, proximal to repeated sequences which serve as DnaB helicase entry sites in oriC, had a severe effect on replication activity. A similar mutation in the distal site RS3 caused a reduction in copy number, but the mutant plasmid was stably maintained despite a broadened distribution of copy number within the population. A mutation in the middle RS2 site had no significant effect on pSC101 replication.     

FLP protein of 2 mu circle plasmid of yeast induces multiple bends in the FLP recognition target site

The FLP recombinase of the 2 mu plasmid of Saccharomyces cerevisiae binds to a target containing three 13 base-pair symmetry elements called a, b and c. The symmetry elements b and c are in direct orientation while the a element is in inverted orientation with respect to b and c on the opposite side of an eight base-pair core region. Each symmetry element acts as a binding site for the FLP protein. The FLP protein can form three different complexes with the FLP recognition target (FRT site) according to the number of elements within the site that are occupied by the FLP protein. Binding of FLP to the FRT site induces DNA bending. We have measured the angles of bends caused by the binding of the FLP protein to full and partial FRT sites. We find that FLP induces three types of bend in the FRT-containing DNA. The type I bend is approximately 60 degrees and results from a molecule of FLP bound to one symmetry element. The type II bend is greater than 144 degrees and results from FLP molecules bound to symmetry elements a and b. The type III bend is approximately 65 degrees and results from FLP proteins bound to symmetry elements b and c. Certain FLP proteins that are defective in recombination can generate the type I and type III bends but are impaired in their ability to induce the type II bend. We discuss the role of bending in FLP-mediated recombination.     

Arginine-rich RNA binding domain and protein scaffold domain of RNase E are important for degradation of RNAI but not for that of the Rep mRNA of the ColE2 plasmid

Expression of the replication initiator protein (Rep) of the ColE2 plasmid is controlled by antisense RNA (RNAI). Therefore alterations in processes and/or rates of degradation of these two RNAs would affect the Rep expression. Here, we have shown that the arginine-rich RNA binding domain (ARRBD) of RNase E is important for the initial endoribonucleolytic cleavage of RNAI but dispensable for the endoribonucleolytic cleavages of the Rep mRNA. We have also shown that the protein scaffold domain of RNase E is important for successive exoribonucleolytic degradation of RNAI, suggesting involvement of RhlB, but dispensable for that of the Rep mRNA. Such differences in the initiation and successive steps of degradation between RNAI and the Rep mRNA might be important in determining their individual degradation efficiencies required for a quick response to the changes in the plasmid copy number.     

DNA plasmid transmission in yeast is associated with specific sub-nuclear localisation during cell division

Circular plasmids in yeast carrying only an origin of DNA replication (ARS) exhibit maternal inheritance bias (MIB) and are poorly transmitted from mother to daughter cell during division. A variety of different sequences that overcome MIB have been described, including centromeric sequences (CEN), telomere-associated repeats, silencer sequences and a specific system encoded by the endogenous 2 micron circle plasmid requiring the cis-acting locus STB and the proteins Rep1 and Rep2. In each case, DNA segregation between mother and daughter cells is dependent on DNA-protein interactions. Using plasmids carrying multiple copies of a lac repressor binding sequence, we have localised DNA molecules in the yeast nucleus using a green fluorescent protein (GFP)-lac repressor fusion protein. We compared GFP localised plasmids carrying a centromere sequence with plasmids based on 2 micron circle carrying or lacking the STB sequences required for their segregation. We show that GFP localised plasmid carrying the complete STB locus co-localises with the plasmid proteins Rep1 and Rep2 to discrete chromatin sites. These sites are distinct from both the telomeres and from sites of cohesin binding. Deletion of the region of STB essential for the stability of the plasmid, leads to a loss of plasmid association with chromatin, relocalisation of plasmids towards the nuclear periphery, and a decrease in the Rep1 protein associated with the plasmid. We conclude that specific plasmid localisation is likely to be important in the overcoming of MIB in yeast.