Transposon insertions in the Flavobacterium johnsoniae ftsX gene disrupt gliding motility and cell division

Flavobacterium johnsoniae is a gram-negative bacterium that exhibits gliding motility. To determine the mechanism of flavobacterial gliding motility, we isolated 33 nongliding mutants by Tn4351 mutagenesis. Seventeen of these mutants exhibited filamentous cell morphology. The region of DNA surrounding the transposon insertion in the filamentous mutant CJ101-207 was cloned and sequenced. The transposon was inserted in a gene that was similar to Escherichia coli ftsX. Two of the remaining 16 filamentous mutants also carried insertions in ftsX. Introduction of the wild-type F. johnsoniae ftsX gene restored motility and normal cell morphology to each of the three ftsX mutants. CJ101-207 appears to be blocked at a late stage of cell division, since the filaments produced cross walls but cells failed to separate. In E. coli, FtsX is thought to function with FtsE in translocating proteins involved in potassium transport, and perhaps proteins involved in cell division, into the cytoplasmic membrane. Mutations in F. johnsoniae ftsX may prevent translocation of proteins involved in cell division and proteins involved in gliding motility into the cytoplasmic membrane, thus resulting in defects in both processes. Alternatively, the loss of gliding motility may be an indirect result of the defect in cell division. The inability to complete cell division may alter the cell architecture and disrupt gliding motility by preventing the synthesis, assembly, or functioning of the motility apparatus.     

Gliding mutants of Myxococcus xanthus with high reversal frequencies and small displacements

Myxococcus xanthus cells move on a solid surface by gliding motility. Several genes required for gliding motility have been identified, including those of the A- and S-motility systems as well as the mgl and frz genes. However, the cellular defects in gliding movement in many of these mutants were unknown. We conducted quantitative, high-resolution single-cell motility assays and found that mutants defective in mglAB or in cglB, an A-motility gene, reversed the direction of gliding at frequencies which were more than 1 order of magnitude higher than that of wild type cells (2.9 min-1 for DeltamglAB mutants and 2.7 min-1 for cglB mutants, compared to 0.17 min-1 for wild-type cells). The average gliding speed of DeltamglAB mutant cells was 40% of that of wild-type cells (on average 1.9 micrometers/min for DeltamglAB mutants, compared to 4.4 micrometers/min for wild-type cells). The mglA-dependent reversals and gliding speeds were dependent on the level of intracellular MglA protein: mglB mutant cells, which contain only 15 to 20% of the wild-type level of MglA protein, glided with an average reversal frequency of about 1.8 min-1 and an average speed of 2.6 micrometers/min. These values range between those exhibited by wild-type cells and by DeltamglAB mutant cells. Epistasis analysis of frz mutants, which are defective in aggregation and in single-cell reversals, showed that a frzD mutation, but not a frzE mutation, partially suppressed the mglA phenotype. In contrast to mgl mutants, cglB mutant cells were able to move with wild-type speeds only when in close proximity to each other. However, under those conditions, these mutant cells were found to glide less often with those speeds. By analyzing double mutants, the high reversing movements and gliding speeds of cglB cells were found to be strictly dependent on type IV pili, encoded by S-motility genes, whereas the high-reversal pattern of mglAB cells was only partially reduced by a pilR mutation. These results suggest that the MglA protein is required for both control of reversal frequency and gliding speed and that in the absence of A motility, type IV pilus-dependent cell movement includes reversals at high frequency. Furthermore, mglAB mutants behave as if they were severely defective in A motility but only partially defective in S motility.     

Identification of genes required for adventurous gliding motility in Myxococcus xanthus with the transposable element mariner

Myxococcus xanthus glides over solid surfaces without the use of flagella, dependent upon two large sets of adventurous (A) and social (S) genes, using two different mechanisms of gliding motility. Myxococcus xanthus A-S- double mutants form non-motile colonies lacking migratory cells at their edges. We have isolated 115 independent mutants of M. xanthus with insertions of transposon magellan-4 in potential A genes by screening for insertions that reduce the motility of a mutant S- parental strain. These insertions are found not only in the three loci known to be required for A motility, mglBA, cglB, and aglU, but also in 30 new genes. Six of these new genes encode different homologues of the TolR, TolB, and TolQ transport proteins, suggesting that adventurous motility is dependent on biopolymer transport. Other insertions which affect both A and S motility suggest that both systems share common energy and cell wall determinants. Because the spectrum of magellan-4 insertions in M. xanthus is extraordinarily broad, transposon mutagenesis with this eukaryotic genetic element permits the rapid genetic analysis of large sets of genes that contribute to a complex microbial behaviors such as A motility.     

P65 truncation impacts P30 dynamics during Mycoplasma pneumoniae gliding

The cell wall-less prokaryote Mycoplasma pneumoniae is a major cause of community-acquired bronchitis and pneumonia in humans. Colonization is mediated largely by a differentiated terminal organelle, which is also the leading end in gliding motility. Cytadherence-associated proteins P30 and P65 appear to traffic concurrently to the distal end of developing terminal organelles. Here, truncation of P65 due to transposon insertion in the corresponding gene resulted in lower gliding velocity, reduced cytadherence, and decreased steady-state levels of several terminal organelle proteins, including P30. Utilizing fluorescent protein fusions, we followed terminal organelle development over time. New P30 foci appeared at nascent terminal organelles in P65 mutants, as in the wild type. However, with forward cell motility, P30 in the P65 mutants appeared to drag toward the trailing cell pole, where it was released, yielding a fluorescent trail to which truncated P65 colocalized. In contrast, P30 was only rarely observed at the trailing end of gliding wild-type cells. Complementation with the recombinant wild-type P65 allele by transposon delivery restored P65 levels and stabilized P30 localization to the terminal organelle.     

Transposon mutagenesis identifies genes associated with Mycoplasma pneumoniae gliding motility

The wall-less prokaryote Mycoplasma pneumoniae, a common cause of chronic respiratory tract infections in humans, is considered to be among the smallest and simplest known cells capable of self-replication, yet it has a complex architecture with a novel cytoskeleton and a differentiated terminal organelle that function in adherence, cell division, and gliding motility. Recent findings have begun to elucidate the hierarchy of protein interactions required for terminal organelle assembly, but the engineering of its gliding machinery is largely unknown. In the current study, we assessed gliding in cytadherence mutants lacking terminal organelle proteins B, C, P1, and HMW1. Furthermore, we screened over 3,500 M. pneumoniae transposon mutants individually to identify genes associated with gliding but dispensable for cytadherence. Forty-seven transformants having motility defects were characterized further, with transposon insertions mapping to 32 different open reading frames widely distributed throughout the M. pneumoniae genome; 30 of these were dispensable for cytadherence. We confirmed the clonality of selected transformants by Southern blot hybridization and PCR analysis and characterized satellite growth and gliding by microcinematography. For some mutants, satellite growth was absent or developed more slowly than that of the wild type. Others produced lawn-like growth largely devoid of typical microcolonies, while still others had a dull, asymmetrical leading edge or a filamentous appearance of colony spreading. All mutants exhibited substantially reduced gliding velocities and/or frequencies. These findings significantly expand our understanding of the complexity of M. pneumoniae gliding and the identity of possible elements of the gliding machinery, providing a foundation for a detailed analysis of the engineering and regulation of motility in this unusual prokaryote.     

Defects in motility and development of Myxococcus xanthus lipopolysaccharide mutants.

Five transposon Tn5 mutants of the procaryote Myxococcus xanthus had been shown previously to be defective in lipopolysaccharide biosynthesis (J. M. Fink,-M. Kalos, and J. F. Zissler, J. Bacteriol. 171:2033-2041, 1989). These mutants were studied for possible defects in gliding motility and multicellular development. Wild-type M. xanthus cells glide both as single cells and as groups of cells. We found that the Tn5 lipopolysaccharide O-antigen mutants were defective in single-cell motility but were unaltered in group motility. These mutant strains were slow to develop but eventually gave rise to normal, spore-filled fruiting bodies. We also had shown previously that 56 (ethyl methanesulfonate-induced and spontaneous) phage-resistant mutants were defective in lipopolysaccharide biosynthesis. We found that many of these lipopolysaccharide O-antigen mutants were defective in single-cell motility but were unaltered in group motility. These mutants also gave rise to normal, spore-filled fruiting bodies. We also studied several phage-resistant mutants which were lacking a side-chain carbohydrate on the lipopolysaccharide core. These mutants possessed both single-cell motility and group motility but were altered in the magnitude of gliding. These mutants were blocked early in development and could not form multicellular fruiting bodies. Several of the mutations in the developmentally aberrant strains were mapped to a single locus by using a collection of genetically linked transposons as genetic markers.     

How myxobacteria glide

BACKGROUND: Many microorganisms, including myxobacteria, cyanobacteria, and flexibacteria, move by gliding. Although gliding always describes a slow surface-associated translocation in the direction of the cell's long axis, it can result from two very different propulsion mechanisms: social (S) motility and adventurous (A) motility. The force for S motility is generated by retraction of type 4 pili. A motility may be associated with the extrusion of slime, but evidence has been lacking, and how force might be generated has remained an enigma. Recently, nozzle-like structures were discovered in cyanobacteria from which slime emanated at the same rate at which the bacteria moved. This strongly implicates slime extrusion as a propulsion mechanism for gliding. RESULTS: Here we show that similar but smaller nozzle-like structures are found in Myxococcus xanthus and that they are clustered at both cell poles, where one might expect propulsive organelles. Furthermore, light and electron microscopical observations show that slime is secreted in ribbons from the ends of cells. To test whether the slime propulsion hypothesis is physically reasonable, we construct a mathematical model of the slime nozzle to see if it can generate a force sufficient to propel M. xanthus at the observed velocities. The model assumes that the hydration of slime, a cationic polyelectrolyte, is the force-generating mechanism. CONCLUSIONS: The discovery of nozzle-like organelles in various gliding bacteria suggests their role in prokaryotic gliding. Our calculations and our observations of slime trails demonstrate that slime extrusion from such nozzles can account for most of the observed properties of A motile gliding.     

Cloning and characterization of the Flavobacterium johnsoniae gliding-motility genes gldB and gldC

The mechanism of bacterial gliding motility (active movement over surfaces without the aid of flagella) is not known. A large number of mutants of the gliding bacterium Flavobacterium johnsoniae (Cytophaga johnsonae) with defects in gliding motility have been previously isolated, and genetic techniques to analyze these mutants have recently been developed. We complemented a nongliding mutant of F. johnsoniae (UW102-99) with a library of wild-type DNA by using the shuttle cosmid pCP26. The complementing plasmid (pCP200) contained an insert of 26 kb and restored gliding motility to 4 of 50 independently isolated nongliding mutants. A 1.9-kb fragment which encompassed two genes, gldB and gldC, complemented all four mutants. An insertion mutation in gldB was polar on gldC, suggesting that the two genes form an operon. Disruption of the chromosomal copy of gldB in wild-type F. johnsoniae UW101 eliminated gliding motility. Introduction of the gldBC operon, or gldB alone, restored motility. gldB appears to be essential for F. johnsoniae gliding motility. It codes for a membrane protein that does not exhibit strong sequence similarity to other proteins in the databases. gldC is not absolutely required for gliding motility, but cells that do not produce GldC form colonies that spread less well than those of the wild type. GldC is a soluble protein and has weak sequence similarity to the fungal lectin AOL.     

Genetic and Molecular Analysis of cglB, a Gene Essential for Single-Cell Gliding in Myxococcus xanthus

Gliding movements of individual isolated Myxococcus xanthus cells depend on the genes of the A-motility system (agl and cgl genes). Mutants carrying defects in those genes are unable to translocate as isolated cells on solid surfaces. The motility defect of cgl mutants can be transiently restored to wild type by extracellular complementation upon mixing mutant cells with wild-type or other motility mutant cells. To develop a molecular understanding of the function of a Cgl protein in gliding motility, we cloned the cglB wild-type allele by genetic complementation of the mutant phenotype. The nucleotide sequence of a 2.85-kb fragment was determined and shown to encode two complete open reading frames. The CglB protein was determined to be a 416-amino-acid putative lipoprotein with an unusually high cysteine content. The CglB antigen localized to the membrane fraction. The swarming and gliding defects of a constructed DeltacglB mutant were fully restored upon complementation with the cglB wild-type allele. Experiments with a cglB allele encoding a CglB protein with a polyhistidine tag at the C terminus showed that this allele also promoted wild-type levels of swarming and single-cell gliding, but was unable to stimulate DeltacglB cells to move. Possible functions of CglB as a mechanical component or as a signal protein in single cell gliding are discussed.     

Chemotactic motility is required for invasion of the host by the fish pathogen Vibrio anguillarum

The role of the flagellum and motility in the virulence of the marine fish pathogen Vibrio anguillarum was examined. Non-motile mutants were generated by transposon mutagenesis. Infectivity studies revealed that disruption of the flagellum and subsequent loss of motility correlated with an approximate 500-fold decrease in virulence when fish were inoculated by immersion in bacteria-containing water. However, the flagellar filament and motility were not required for pathogenicity following intraperitoneal injection of fish. The transposon-insertion site for six mutants was determined by cloning and sequencing of the Vibrio DNA flanking the transposon. V. anguillarum genes whose products showed strong homology to proteins with an established role in flagellum biosynthesis were identified. One of the aflagellate mutants had a transposon insertion in the rpoN gene of V. anguillarum . This rpoN mutant failed to grow at low concentrations of available iron and was avirulent by both the immersion and intraperitoneal modes of inoculation. A chemotaxis gene, cheR , was located upstream of one transposon insertion and an in-frame deletion was constructed in the coding region of this gene. The resulting non-chemotactic mutant exhibited wild-type pathogenicity when injected intraperitoneally into fish but showed a decrease in virulence similar to that seen for the non-motile aflagellate mutants following immersion infection. Hence, chemotactic motility is a required function of the flagellum for the virulence of V. anguillarum     

Identification of the cglC, cglD, cglE, and cglF genes and their role in cell contact-dependent gliding motility in Myxococcus xanthus

Within Myxococcus xanthus biofilms, cells actively move and exchange their outer membrane (OM) lipoproteins and lipids. Between genetically distinct strains, OM exchange can regulate recipient cell behaviors, including gliding motility and development. Although many different proteins are thought to be exchanged, to date, only two endogenous OM lipoproteins, CglB and Tgl, are known to be transferred. Protein exchange requires the TraAB proteins in recipient and donor cells, where they are hypothesized to facilitate OM fusion for transfer. To better understand the types of proteins exchanged, we identified the genes for the remaining set of cgl gliding motility mutants. These mutants are unique because their motility defect can be transiently restored by physical contact with donor cells that encode the corresponding wild-type protein, a process called stimulation. Similar to CglB and Tgl, the cglC and cglD genes encode type II signal sequences, suggesting that they are also lipoproteins. Surprisingly, the cglE and cglF genes instead encode type I signal sequences, suggesting that nonlipoproteins are also exchanged. Consistent with this idea, the addition of exogenous synthetic CglF protein (71 amino acids) to a cglF mutant rescued its motility defect. In contrast to a live donor cell, stimulation with purified CglF protein occurred independently of TraA. These results also indicate that CglF may localize to the cell surface. The implications of our findings on OM exchange are discussed.     

Insertions of Tn5 near genes that govern stimulatable cell motility in Myxococcus

Insertions of transposon Tn5 were used to examine the genetics of motility mutants in Myxococcus. Fifteen independent insertions of Tn5 were isolated that were linked to seven different loci that govern motility. Among the motility mutants that can be stimulated to move transiently by contact with other cells, a one-to-one correspondence was confirmed between specificity of stimulation and genetic locus. There are six different specificities and six corresponding loci, as if each locus governs a different protein required for gliding motility.     

Genetic requirements for potassium ion-dependent colony spreading in Bacillus subtilis

Undomesticated strains of Bacillus subtilis exhibit extensive colony spreading on certain soft agarose media: first the formation of dendritic clusters of cells, followed by spreading (pellicle-like) growth to cover the entire surface. These phases of colonization are dependent on the level of potassium ion (K(+)) but independent of flagella, as verified with a mutant with a hag gene replacement; this latter finding highlights the importance of sliding motility in colony spreading. Exploring the K(+) requirement, directed mutagenesis of the higher-affinity K(+) transporter KtrAB, but not the lower-affinity transporter KtrCD, was found to inhibit surface colonization unless sufficient KCl was added. To identify other genes involved in K(+)-dependent colony spreading, transposon insertion mutants in wild-type strain 3610 were screened. Disruption of genes for pyrimidine (pyrB) or purine (purD, purF, purH, purL, purM) biosynthetic pathways abolished the K(+)-dependent spreading phase. Consistent with a requirement for functional nucleic acid biosynthesis, disruption of purine synthesis with the folic acid antagonist sulfamethoxazole also inhibited spreading. Other transposon insertions disrupted acetoin biosynthesis (the alsS gene), acidifying the growth medium, glutamine synthetase (the glnA gene), and two surfactin biosynthetic genes (srfAA, srfAB). This work identified four classes of surface colonization mutants with defective (i) potassium transport, (ii) surfactin formation, (iii) growth rate or yield, or (iv) pH control. Overall, the ability of B. subtilis to colonize surfaces by spreading is highly dependent on balanced nucleotide biosynthesis and nutrient assimilation, which require sufficient K(+) ions, as well as growth conditions that promote sliding motility.     

Cloning and Characterization of the Flavobacterium johnsoniae Gliding Motility Genes gldD and gldE

Cells of Flavobacterium johnsoniae move over surfaces by a process known as gliding motility. The mechanism of this form of motility is not known. Cells of F. johnsoniae propel latex spheres along their surfaces, which is thought to be a manifestation of the motility machinery. Three of the genes that are required for F. johnsoniae gliding motility, gldA, gldB, and ftsX, have recently been described. Tn4351 mutagenesis was used to identify another gene, gldD, that is needed for gliding. Tn4351-induced gldD mutants formed nonspreading colonies, and cells failed to glide. They also lacked the ability to propel latex spheres and were resistant to bacteriophages that infect wild-type cells. Introduction of wild-type gldD into the mutants restored motility, ability to propel latex spheres, and sensitivity to bacteriophage infection. gldD codes for a cytoplasmic membrane protein that does not exhibit strong sequence similarity to proteins of known function. gldE, which lies immediately upstream of gldD, encodes another cytoplasmic membrane protein that may be involved in gliding motility. Overexpression of gldE partially suppressed the motility defects of a gldB point mutant, suggesting that GldB and GldE may interact. GldE exhibits sequence similarity to Borrelia burgdorferi TlyC and Salmonella enterica serovar Typhimurium CorC.     

Cloning of Flagellar Genes in Chlamydomonas Reinhardtii by DNA Insertional Mutagenesis

Chlamydomonas is a popular genetic model system for studying many cellular processes. In this report, we describe a new approach to isolate Chlamydomonas genes using the cloned nitrate reductase gene (NIT1) as an insertional mutagen. A linearized plasmid containing the NIT1 gene was introduced into nit1 mutant cells by glass-bead transformation. Of 3000 Nit(+) transformants examined, 74 showed motility defects of a wide range of phenotypes, suggesting that DNA transformation is an effective method for mutagenizing cells. For 13 of 15 such motility mutants backcrossed to nit(-) mutant strains, the motility phenotype cosegregated with the Nit(+) phenotype, indicating that the motility defects of these 13 mutants may be caused by integration of the plasmid. Further genetic analysis indicated that three of these mutants contained alleles of previously identified loci: mbo2 (move backward only), pf13 (paralyzed flagella) and vfl1 (variable flagellar number). Three other abnormal-flagellar-number mutants did not map to any previously described loci at which mutations produce similar phenotypes. Genomic sequences flanking the integrated plasmid in the mbo2 and vfl1 mutants were isolated and used as probes to obtain wild-type genomic clones, which complemented the motility defects upon transformation into cells. Our results demonstrate the potential of this new approach for cloning genes identified by mutation in Chlamydomonas.     

浅绿叶水稻突变体的特性与遗传分析

在簇生稻与粳稻日本晴杂交后代F8世代中发现一个能稳定遗传的浅绿叶色突变体(pgl,pale green leaf).与野生型相比,突变体pgl株高、剑叶宽、主穗粒数和千粒重均显著下降.从幼苗开始,突变体pgl叶片都表现为浅绿色.在苗期和抽穗期突变体叶片的叶绿素含量都极显著低于野生型,其中叶绿素b的含量极低,仅为0.00...     

Flavobacterium johnsoniae RemA is a mobile cell surface lectin involved in gliding

Cells of Flavobacterium johnsoniae move rapidly over surfaces by a process known as gliding motility. Gld proteins are thought to comprise the motor that propels the cell surface adhesin SprB. Cells with mutations in sprB are partially defective in motility and are also resistant to some bacteriophages. Transposon mutagenesis of a strain carrying a deletion spanning sprB identified eight mutants that were resistant to additional phages and exhibited reduced motility. Four of the mutants had transposon insertions in remA, which encodes a cell surface protein that has a lectin domain and appears to interact with polysaccharides. Three other genes identified in this screen (remC, wza, and wzc) encode proteins predicted to be involved in polysaccharide synthesis and secretion. Myc-tagged versions of RemA localized to the cell surface and were propelled rapidly along the cell at speeds of 1 to 2 μm/s. Deletion of gldN and gldO, which encode components of a bacteroidete protein secretion system, blocked the transport of RemA to the cell surface. Overexpression of RemA resulted in the formation of cell aggregates that were dispersed by the addition of galactose or rhamnose. Cells lacking RemC, Wza, and Wzc failed to aggregate. Cells of a remC mutant and cells of a remA mutant, neither of which formed aggregates in isolation, aggregated when they were mixed together, suggesting that polysaccharides secreted by one cell may interact with RemA on another cell. Fluorescently labeled lectin Ricinus communis agglutinin I detected polysaccharides secreted by F. johnsoniae. The polysaccharides bound to cells expressing RemA and were rapidly propelled on the cell surface. RemA appears to be a mobile cell surface adhesin, and secreted polysaccharides may interact with the lectin domain of RemA and enhance motility.     

Mycoplasma pneumoniae Protein P30 Is Required for Cytadherence and Associated with Proper Cell Development

The attachment organelle of Mycoplasma pneumoniae is a polar, tapered cell extension containing an intracytoplasmic, electron-dense core. This terminal structure is the leading end in gliding motility, and its duplication is thought to precede cell division, raising the possibility that mutations affecting cytadherence also confer a defect in motility or cell development. Mycoplasma surface protein P30 is associated with the attachment organelle, and P30 mutants II-3 and II-7 do not cytadhere. In this study, the recombinant wild-type but not the mutant II-3 p30 allele restored cytadherence when transformed into P30 mutants by recombinant transposon delivery. The mutations associated with loss of P30 in mutant II-3 and reacquisition of P30 in cytadhering revertants thereof were identified by nucleotide sequencing of the p30 gene. Morphological abnormalities that included ovoid or multilobed cells having a poorly defined tip structure were associated with loss of P30. Digital image analysis confirmed quantitatively the morphological differences noted visually. Transformation of the P30 mutants with the wild-type p30 allele restored a normal morphology, as determined both visually and by digital image analysis, suggesting that P30 plays a role in mycoplasma cell development. Finally, the P30 mutants localized the adhesin protein P1 to the terminal organelle, indicating that P30 is not involved in P1 trafficking but may be required for its receptor-binding function.     

Development and use of a gene deletion strategy for Flavobacterium johnsoniae to identify the redundant gliding motility genes remF, remG, remH, and remI

Cells of Flavobacterium johnsoniae exhibit rapid gliding motility over surfaces. Cell movement is thought to involve motor complexes comprised of Gld proteins that propel the cell surface adhesin SprB. The four distal genes of the sprB operon (sprC, sprD, sprB, and sprF) are required for normal motility and for formation of spreading colonies, but the roles of the remaining three genes (remF, remG, and fjoh_0982) are unclear. A gene deletion strategy was developed to determine whether these genes are involved in gliding. A spontaneous streptomycin-resistant rpsL mutant of F. johnsoniae was isolated. Introduction of wild-type rpsL on a plasmid restored streptomycin sensitivity, demonstrating that wild-type rpsL is dominant to the mutant allele. The gene deletion strategy employed a suicide vector carrying wild-type rpsL and used streptomycin for counterselection. This approach was used to delete the region spanning remF, remG, and fjoh_0982. The mutant cells formed spreading colonies, demonstrating that these genes are not required for normal motility. Analysis of the genome revealed a paralog of remF (remH) and a paralog of remG (remI). Deletion of remH and remI had no effect on motility of wild-type cells, but cells lacking remF and remH, or cells lacking remG and remI, formed nonspreading colonies. The motility defects resulting from the combination of mutations suggest that the paralogous proteins perform redundant functions in motility. The rpsL counterselection strategy allows construction of unmarked mutations to determine the functions of individual motility proteins or to analyze other aspects of F. johnsoniae physiology.