Production of poly(3-hydroxybutyrate) from whey by cell recycle fed-batch culture of recombinant Escherichia coli

A new fermentation strategy using cell recycle membrane system was developed for the efficient production of poly(3-hydroxybutyrate) (PHB) from whey by recombinant Escherichia coli strain CGSC 4401 harboring the Alcaligenes latus polyhydroxyalkanoate (PHA) biosynthesis genes. By cell recycle, fed-batch cultivation employing an external membrane module, the working volume of fermentation could be constantly maintained at 2.3 l. The final cell concentration, PHB concentration and PHB content of 194 g l^–1, 168 g l^–1 and 87%, respectively, were obtained in 36.5 h by the pH-stat cell recycle fed-batch culture using whey solution concentrated to contain 280 g lactose l^–1 as a feeding solution, resulting in a high productivity of 4.6 g PHB l^–1 h^–1.     

Growth-associated production of poly(hydroxybutyric acid) by Azotobacter beijerinckii from organic nitrogen substrates

Poly(hydroxybutyric acid) (PHB) was produced by a selectant of Azotobacter beijerinckii in media containing only organic nitrogen sources such as N substrates. The chosen compounds were casein peptone, yeast extract, casamino acids and urea, each combined with carbon substrates glucose or sucrose. The PHB was synthesized under growth-associated conditions. The concentrations amounted to more than 50% of cell dry mass on casein peptone/glucose as well as urea/glucose medium within 45 h fermentation time. Corresponding to these yields, productivities of about 0.8 g PHB l⁻¹ h⁻¹ were discovered. The highest values increased to 1.06 g PHB l⁻¹ h⁻¹ on casein peptone/glucose medium and 1.1 g PHB l⁻¹ h⁻¹ on yeast extract/glucose medium after a period of 20 h. It was found that oxygen limitation was essential for successful product formation, as demonstrated earlier. These data from basic research may support further investigations into the use of technical proteins from renewable sources as substrates for PHB production by a strain of A. beijerinckii. Received: 3 June 1997 / Received revision: 29 August 1997 / Accepted: 15 September 1997     

Production of polyhydroxybutyrate by Ralstonia eutropha from protein hydrolysates

Polyhydroxybutyrate (PHB) was produced by Ralstonia eutropha DSM 11348 (formerly Alicaligenes eutrophus) in media containing 20–30 g l⁻¹ casein peptone or casamino acids as sole sources of nitrogen. In fermentations using media based on casein peptone, permanent growth up to a cell dry mass of 65 g l⁻¹ was observed. PHB accumulated in cells up to 60%–80% of dry weight. The lowest yields were found in media without any trace elements or with casamino acids added only. The residual cell dry masses were limited to 10–15 g l⁻¹ and did not contain PHB. The highest productivity amounted to 1.2 g PHB l⁻¹ h⁻¹. The mean molecular mass of the biopolymer was determined as 750 kDa. The proportion of polyhydroxyvalerate was less than 0.2% in PHB. The bioprocess was scaled up to a 300-l plant. During a fermentation time of 39 h the cells accumulated PHB to 78% w/w. The productivity was 0.98 g PHB l⁻¹ h¹. Received: 8 July 1998 / Accepted: 26 August 1998     

High volumetric yields of functional dimeric miniantibodies in Escherichia coli,using an optimized expression vector and high-cell-density fermentation under non-limited growth conditions

Functional bivalent miniantibodies, directed against the epidermal growth factor receptor, accumulated to more than 3 gl⁻¹ in high-cell-density cultures of Escherichia coli RV308(pHKK) on a pilot scale. The miniantibodies consist of scFv fragments with a C-termi-nal hinge followed by a helix-turn-helix motif, which homodimerizes in vivo. The improved expression vector pHKK is characterized by the hok/sok suicide system, improving plasmid maintenance, and the inducible lac p/o promoter system with the very strong T7g10 Shine-Dalgarno sequence. The expression unit is flanked by terminators. The prototrophic RV308 cells were cultivated in glucose mineral salt medium and reached a cell density of 145 g dry biomass l⁻¹ after 33 h. After induction, growth continued almost unchanged for a further 4 h with concomitant miniantibody formation. In the fed-batch phase, the concentration of glucose was kept almost constant at the physiological level of approximately 1.5 g l⁻¹, using on-line flow injection analysis for control. Surprisingly, E. coli RV308(pHKK) did not accumulate significant amounts of the metabolic by-product acetate under these unlimited aerobic growth conditions. Received: 26 February 1996 / Received revision: 1 August 1996 / Accepted: 12 August 1996     

Mineralization of pentachlorophenol in a contaminated soil by Pseudomonas sp UG30 cells encapsulated in κ-carrageenan

A fermentation process in Escherichia coli for production of supercoiled plasmid DNA for use as a DNA vaccine was developed using an automated feed-back control nutrient feeding strategy based on dissolved oxygen (DO) and pH. The process was further automated through a computer-aided data processing system to regulate the cell growth rate by controlling interactively both the nutrient feed rate and agitation speed based on DO. The process increased the total yield of the plasmid DNA by approximately 10-fold as compared to a manual fed-batch culture. The final cell yield from the automated process reached 60 g L⁻¹ of dry cell weight (OD₆₀₀ = 120) within 24 h. A plasmid DNA yield of 100 mg L⁻¹ (1.7 mg g⁻¹ cell weight) was achieved by using an alkaline cell lysis method. Plasmid yield was confirmed using High Performance Liquid Chromatography (HPLC) analysis. Because cells had been grown under carbon-limiting conditions in the automated process, acetic acid production was minimal (below 0.01 g L⁻¹) throughout the fed-batch stage. In contrast, in the manual process, an acid accumulation rate as high as 0.36 g L⁻¹ was observed, presumably due to the high nutrient feed rates used to maintain a maximum growth rate. The manual fed-batch process produced a low cell density averaging 10–12 g L⁻¹ (OD₆₀₀ = 25–30) and plasmid yields of 5–8 mg L⁻¹ (approximately 0.7 mg g⁻¹ cells). The improved plasmid DNA yields in the DO- and pH-based feed-back controlled process were assumed to be a result of a combination of increased cell density, reduced growth rate (μ) from 0.69 h⁻¹ to 0.13 h⁻¹ and the carbon/nitrogen limitation in the fed-batch stage. The DO- and pH-based feed-back control, fed-batch process has proven itself to be advantageous in regulating cell growth rate to achieve both high cell density and plasmid yield without having to use pure oxygen. The process was reproducible in triplicate fermentations at both 7-L and 80-L scales. Received 22 March 1996/ Accepted in revised form 20 September 1996     

Growth-associated synthesis of recombinant human glucagon and human growth hormone in high-cell-density cultures of Escherichia coli

Synthesis of two recombinant proteins (human glucagon and human growth hormone) was investigated in fed-batch cultures at high cell concentrations of recombinant Escherichia coli. The glucose-limited growth was achieved without accumulation of metabolic by-products and hence the cellular environment is presumed invariable during growth and recombinant protein synthesis. Via exponential feeding in the two-phase fed-batch operation, the specific cell growth rate was successfully controlled at the desired rates and the fed-batch mode employed is considered appropriate for examining the correlation between the specific growth rate and the efficiency of recombinant product formation in the recombinant E. coli strains. The two recombinant proteins were expressed as fusion proteins and the concentration in the culture broth was increased to 15 g fusion growth hormone l⁻¹ and 7 g fusion glucagon l⁻¹. The fusion growth hormone was initially expressed as soluble protein but seemed to be gradually aggregated into inclusion bodies as the expression level increased, whereas the synthesized fusion glucagon existed as a cytoplasmic soluble protein during the whole induction period. The stressful conditions of cultivation employed (i.e. high-cell-density cultivation at low growth rate) may induce the increased production of various host-derived chaperones and thereby enhance the folding efficiency of synthesized heterologous proteins. The synthesis of the recombinant fusion proteins was strongly growth-dependent and more efficient at a higher specific growth rate. The mechanism linking specific growth rate with recombinant protein productivity is likely to be related to the change in cellular ribosomal content. Received: 27 May 1997 / Received last revision: 31 October 1997 / Accepted: 21 November 1997     

Batch and continuous cultivation of Anaerobiospirillum succiniciproducens for the production of succinic acid from whey

Batch and continuous cultivation of Anaerobiospirillum succiniciproducens were systematically studied for the production of succinic acid from whey. Addition of 2.5 g l⁻¹ yeast extract and 2.5 g l⁻¹ polypeptone per 10 g l⁻¹ whey was most effective for succinic acid production from both treated and nontreated whey. When 20 g l⁻¹ nontreated whey and 7 g l⁻¹ glucose were used as cosubstrates, the yield and productivity of succinic acid reached at the end of fermentation were 95% and 0.46 g (l h)⁻¹, respectively. These values were higher than those obtained using nontreated whey alone [93% and 0.24 g (l h)⁻¹ for 20 g l⁻¹ whey]. Continuous fermentation of A. succiniciproducens at an optimal dilution rate resulted in the production of succinic acid with high productivity [1.35 g (l h)⁻¹], high conversion yield (93%), and higher ratio of succinic acid to acetic acid (5.1:1) from nontreated whey. Received: 23 July 1999 / Received revision: 17 November 1999 / Accepted: 24 December 1999     

High-density Escherichia coli cultures for continuous l(−)-carnitine production

The use of a biological procedure for l-carnitine production as an alternative to chemical methods must be accompanied by an efficient and highly productive reaction system. Continuous l-carnitine production from crotonobetaine was studied in a cell-recycle reactor with Escherichia coli O44 K74 as biocatalyst. This bioreactor, running under the optimum medium composition (25 mM fumarate, 5 g/l peptone), was able to reach a high cell density (26 g dry weight/l) and therefore to obtain high productivity values (6.2 g l-carnitine l⁻¹ h⁻¹). This process showed its feasibility for industrial l-carnitine production. In addition, resting cells maintained in continuous operation, with crotonobetaine as the only medium component, kept their biocatalytic capacity for 4 days, but the biotransformation capacity decreased progressively when this particular method of cultivation was used. Received: 10 December 1998 / Received revision: 19 February 1999 / Accepted: 20 February 1999     

Reduction of biomass in a bioscrubber for waste gas treatment by limited supply of phosphate and potassium ions

  Elimination of n-butanol from the gas phase was examined with a mixed culture in a compact bioscrubber. The extent of the cell concentration was limited by the supply of n-butanol, phosphate or potassium, and the growth rate was determined by the dilution rate. With n-butanol as the limiting substrate the cellular yield was 0.53 g dry cell weight/g n-butanol. Phosphate limitation decreased this yield to 0.34 g and potassium limitation to 0.31 g dry cell weight/g n-butanol at a dilution rate of 0.1/h. Under these conditions n-butanol was eliminated from the gas phase by 84%–100%. In the same order of limitations the specific degradation rate ranged from 0.19 g to 0.32 g n-butanol g dry cell weight⁻¹ h⁻¹. The fraction of n-butanol required to satisfy the needs for maintenance energy increased significantly depending on the limiting nutrient. Limitation by n-butanol, phosphate or potassium caused a maintenance requirement of 0.07, 0.16 and 0.34 g n-butanol g dry cell weight⁻¹ h⁻¹, thus showing a fivefold increase. This high demand for the carbon source demonstrated the feasibility of operating a bioscrubber under mineral limitation to reduce biomass formation significantly, and to maintain a high degree of substrate elimination from the gas phase. Received: 22 May 1996 / Received revision: 23 July 1996 / Accepted: 5 August 1996     

Poly(3-hydroxybutyrate) synthesis from glycerol by a recombinant Escherichia coli arcA mutant in fed-batch microaerobic cultures

Poly(3-hydroxybutyrate) (PHB) synthesis was analyzed under microaerobic conditions in a recombinant Escherichia coli arcA mutant using glycerol as the main carbon source. The effect of several additives was assessed in a semi-synthetic medium by the ‘one-factor-at-a-time’ technique. Casein amino acids (CAS) concentration was an important factor influencing both growth and PHB accumulation. Three factors exerting a statistically significant influence on PHB synthesis were selected by using a Plackett–Burman screening design [glycerol, CAS, and initial cell dry weight (CDW) concentrations] and then optimized through a Box–Wilson design. Under such optimized conditions (22.02 g l⁻¹ glycerol, 1.78 g l⁻¹ CAS, and 1.83 g l⁻¹ inoculum) microaerobic batch cultures gave rise to 8.37 g l⁻¹ CDW and 3.52 g l⁻¹ PHB in 48 h (PHB content of 42%) in a benchtop bioreactor. Further improvements in microaerobic PHB accumulation were obtained in fed-batch cultures, in which glycerol was added to maintain its concentration above 5 g l⁻¹. After 60 h, CDW and PHB concentration reached 21.17 and 10.81 g l⁻¹, respectively, which results in a PHB content of 51%. Microaerobic fed-batch cultures allowed a 2.57-fold increase in volumetric productivity when compared with batch cultures. Electronic supplementary material The online version of this article (doi:) contains supplementary material, which is available to authorized users. An erratum to this article can be found at     

Utilization of <Emphasis Type="Italic">fadA</Emphasis> knockout mutant <Emphasis Type="Italic">Pseudomonas putida</Emphasis> for overproduction of medium chain-length-polyhydroxyalkanoate

The fadBA operon in the fatty acid β-oxidation pathway of P. putida KCTC1639 was blocked to induce a metabolic flux of the intermediates to the biosynthesis of medium chain-length PHA (mcl-PHA). Succinate at 150 mg l⁻¹ stimulated cell growth and also the biosynthesis of medium chain-length-polyhydroxyalkanoate. pH-stat fed-batch cultivation of the fadA knockout mutant P. putida KCTC1639 was carried out for 60 h, in which mcl-PHA reached 8 g l⁻¹ with a cell dry weight of 10.3 g l⁻¹.     

Determination of the kinetic parameters during continuous cultivation of the lipase-producing thermophile Bacillus sp. IHI-91 on olive oil

A thermostable lipase was produced in continuous cultivation of a newly isolated thermophilic Bacillus sp. strain IHI-91 growing optimally at 65 °C. Lipase activity decreased with increasing dilution rate while lipase productivity showed a maximum of 340 U l⁻¹ h⁻¹ at a dilution rate of 0.4 h⁻¹. Lipase productivity was increased by 50% compared to data from batch fermentations. Up to 70% of the total lipase activity measured was associated to cells and by-products or residual substrate. Kinetic and stoichiometric parameters for the utilisation of olive oil were determined. The maximal biomass output method led to a saturation constant K _S of 0.88 g/l. Both batch growth data and a washout experiment yielded a maximal specific growth rate, μ_max, of 1.0 h⁻¹. Oxygen uptake rates of up to 2.9 g l⁻¹h⁻¹ were calculated and the yield coefficient, Y _X/O, was determined to be 0.29 g dry cell weight/g O₂. From an overall material balance the yield coefficient, Y _X/S, was estimated to be 0.60 g dry cell weight/g olive oil. Received: 8 January 1997 / Received revision: 30 April 1997 / Accepted: 4 May 1997     

Fed-batch production of recombinant human calcitonin precursor fusion protein using Staphylococcus carnosus as an expression-secretion system

A pH-auxostatic fed-batch process was developed for the secretory production of a fusion protein consisting of the pro-part of Staphylococcus hyicus lipase and two synthetic human calcitonin (hCT) precursor repeats under the control of a xylose-inducible promotor from Staphylococcus xylosus. Using glycerol as the energy source and pH-controlled addition of yeast extract resulted in the production of 2000 mg l⁻¹ of the fusion protein (420 mg l⁻¹ of the recombinant hCT precursor) within 14 h, reaching 45 g l⁻¹ cell dry mass with Staphylococcus carnosus in a stirred-tank reactor. Product titer and space-time yield (30 mg calcitonin precursor l⁻¹ h⁻¹) were thus improved by a factor of 2, and 4.5, respectively, compared to Escherichia coli expression-secretion systems for the production of calcitonin precursors. Two hundred grams of the fusion protein was secreted by the recombinant S. carnosus on a 150-l scale (scale-up factor of 50) with a minimum use of technical-grade yeast extract (40 mg fusion protein g⁻¹ yeast extract). Received: 18 January 2000 / Received revision: 14 April 2000 / Accepted: 14 April 2000     

Production of sophorolipids from whey

Sophorolipids, obtained by a two-stage process starting from deproteinized whey concentrate using Cryptococcus curvatus ATCC 20509 and Candida bombicola ATCC 22214, were compared to products from one-stage processes, using different lipidic compounds as substrates. Results showed that above all carbon source and not cultivation conditions had a distinct influence on the composition of the crude product mixture and therefore on the physicochemical and biological properties of the sophorolipids, such as, for example, surface activity, cytotoxicity and stability against hydrolases. The results were completed by corresponding data for purified mono- and diacetylated (17-hydroxyoctadecenoic)-1′,4′′-lactonized sophorolipids. Crude sophorolipid mixtures showed moderate to good surface active properties (SFT^min 39 mN m⁻¹, CMC 130 mg l⁻¹), water solubilities (2–3 g l⁻¹) and low cytotoxicities (LC₅₀ 300–700 mg l⁻¹). In contrast, purified sophorolipids were more surface active (SFT^min 36 mN m⁻¹, CMC 10 mg l⁻¹), less water soluble (max. 70 mg l⁻¹) and showed stronger cytotoxic effects (LC₅₀ 15 mg l⁻¹). Incubation of crude sophorolipid mixtures with different hydrolases demonstrated that treatment with commercially available lipases such as from Candida rugosa and Mucor miehei distinctly reduced the surface active properties of the sophorolipids, while treatment with porcine liver esterase and glycosidases had no effect. Received: 23 February 1999 / Received revision: 27 May 1999 / Accepted: 28 May 1999     

Production of 1,3-propanediol by Clostridium butyricum in continuous culture with cell recycling

The continuous fermentation of 1,3-propanediol from glycerol by Clostridium butyricum was subjected to cell recycling by filtration using hollow-fibre modules made from polysulphone. The performance of the culture system was checked at a retention ratio (dilution rate/bleed rate) of 5, dilution rates between 0.2 h⁻¹ and 1.0 h⁻¹ and glycerol input concentrations of 32 g l⁻¹ and 56 g l⁻¹. The near-to-optimum propanediol concentration of 26.5 g l⁻¹ (for 56 g l⁻¹ glycerol) was maintained up to a dilution rate of 0.5 h⁻¹ and then decreased while the propanediol productivity was highest at 0.7 h⁻¹. The productivity could be increased by a factor of four in comparison to the continuous culture without cell recycling. By application of the model of Zeng and Deckwer [(1995) Biotechnol Prog 11: 71–79] for cultures under substrate excess, it was shown that the limitations resulted exclusively from product inhibition and detrimental influences from the cell recycling system, such as shear stress, were not involved. Received: 20 October 1997 / Received revision: 12 December 1997 / Accepted: 14 December 1997     

Production of poly(3-hydroxybutyrate) from inexpensive substrates

Two inexpensive substrates, starch and whey were used to produce poly(3-hydroxybutyrate) (PHB) in fed-batch cultures of Azotobacter chroococcum and recombinant Escherichia coli, respectively. Oxygen limitation increased PHB contents in both fermentations. In fed-batch culture of A. chroococcum, cell concentration of 54 g l⁻¹ with 46% PHB was obtained with oxygen limitation, whereas 71 g l⁻¹ of cell with 20% PHB was obtained without oxygen limitation. The timing of PHB biosynthesis in recombinant E. coli was controlled using the agitation speed of a stirred tank fermentor. A PHB content of 80% could be obtained with oxygen limitation by increasing the agitation speed up to only 500 rpm.     

Growth of Photorhabdus luminescens in batch and glucose fed-batch culture

Photorhabdus luminescens, a bacterial symbiont of entomopathogenic biocontrol nematodes, was grown in batch and glucose fed-batch culture. The cell density, bioluminescence, production of antibiotic substances, number of cells with inclusion bodies, glucose concentration and oxygen uptake rate were recorded. The addition of 12.4 g l⁻¹ glucose prolonged the growth, and the yield almost doubled, from 6.85 g l⁻¹ to 12.45 g l⁻¹ dry mass. The production of antibiotic substances increased by 140%. Bioluminescence was higher in the batch culture. A shift of P. luminescens to phase II variants was not detected. Received: 21 January 2000 / Received revision: 3 April 2000 / Accepted: 7 April 2000     

Poly(3-hydroxybutyrate) production by <Emphasis Type="Italic">Halomonas boliviensis</Emphasis> in fed-batch culture

High poly(3-hydroxybutyrate) (PHB) content and volumetric productivity were achieved by fed-batch culture of Halomonas boliviensis using a defined medium. Initial shake flask cultivations in a minimal medium revealed that the growth of H. boliviensis was supported only when the medium was supplemented with aspartic acid, glycine, or glutamine. Addition of 0.1% (w/v) glutamine in the medium resulted in the highest cell dry weight (CDW; 3.9 g l⁻¹). Glutamine was replaced by the less expensive monosodium glutamate (MSG) in the medium without any notable change in the final cell density. Effect of initial concentrations of NH₄Cl and K₂HPO₄ on cell growth and PHB accumulation by H. boliviensis was then analyzed using a fed-batch fermentation system. The best conditions for PHB production by H. boliviensis were attained using 0.4% (w/v) NH₄Cl and 0.22% (w/v) K₂HPO₄ and adding MSG intermittently to the fermentor. Poly(3-hydroxybutyrate) content and CDW reached 90 wt.% and 23 g l⁻¹, respectively, after 18 h of cultivation. In order to increase CDW and PHB content, MSG, NH₄Cl, and K₂HPO₄ were initially fed to the fermentor to maintain their concentrations at 2%, 0.4%, and 0.22% (w/v), respectively, and subsequently their feed was suppressed. This resulted in a CDW of 44 g l⁻¹, PHB content of 81 wt.%, and PHB volumetric productivity of 1.1 g l⁻¹ h⁻¹.     

Enhanced production of GDP-<Emphasis Type="SmallCaps">l</Emphasis>-fucose by overexpression of NADPH regenerator in recombinant <Emphasis Type="Italic">Escherichia coli</Emphasis>

Biosynthesis of guanosine 5′-diphosphate-l-fucose (GDP-l-fucose) requires NADPH as a reducing cofactor. In this study, endogenous NADPH regenerating enzymes such as glucose-6-phosphate dehydrogenase (G6PDH), isocitrate dehydrogenase (Icd), and NADP⁺-dependent malate dehydrogenase (MaeB) were overexpressed to increase GDP-l-fucose production in recombinant Escherichia coli. The effects of overexpression of each NADPH regenerating enzyme on GDP-l-fucose production were investigated in a series of batch and fed-batch fermentations. Batch fermentations showed that overexpression of G6PDH was the most effective for GDP-l-fucose production. However, GDP-l-fucose production was not enhanced by overexpression of G6PDH in the glucose-limited fed-batch fermentation. Hence, a glucose feeding strategy was optimized to enhance GDP-l-fucose production. Fed-batch fermentation with a pH-stat feeding mode for sufficient supply of glucose significantly enhanced GDP-l-fucose production compared with glucose-limited fed-batch fermentation. A maximum GDP-l-fucose concentration of 235.2 ± 3.3 mg l⁻¹, corresponding to a 21% enhancement in the GDP-l-fucose production compared with the control strain overexpressing GDP-l-fucose biosynthetic enzymes only, was achieved in the pH-stat fed-batch fermentation of the recombinant E. coli overexpressing G6PDH. It was concluded that sufficient glucose supply and efficient NADPH regeneration are crucial for NADPH-dependent GDP-l-fucose production in recombinant E. coli.     

Production of a fusion protein of sweet potato sporamin from recombinant E. coli XL1 Blue by fed-batch fermentations

Glucose-stat and pH-stat control strategies were employed in order to culture a recombinant E. coli XL1 Blue to produce a fusion protein of sweet potato sporamin (SPA) and glutathione S-transferase (GST) from the recombinant E. coli XL1 Blue. Cell densities up to 25 g l^–1 and 28.9 mg fusion protein (GST-SPA) g^–1 cell dry weight (CDW) was achieved from a fed-batch fermentation controlled by glucose-stat strategy. A pH-stat control fermentation using glycerol as a carbon source gave E. coli up to 27 g l^–1 and 31.5 mg GST-SPA g^–1 CDW. Additionally, a pH-stat control strategy using glucose as a carbon source gave E. coli up to 15 g l^–1 and about 22.7 mg g^–1 CDW of GST-SPA.