Target cell lysis by cytotoxic T lymphocytes redirected by antibody-coated polystyrene beads

Cytotoxic T lymphocytes were found to mediate rapid lysis of target cells not normally recognized in the presence of small polystyrene beads coated with a combination of anti-T3 and antitarget cell antibodies. Lysis was not seen with beads bearing one of these antibodies alone, nor with a mixture of two types of beads each coated with a single antibody. The effector cells mediating this lysis include long term allospecific human CTL, and both human and mouse CTL clones recognizing mouse class I MHC Kb Ag. TNP-modified mouse tumor cells, a human lymphoblastoid line, and human red cells were found to be good targets for this cytotoxicity. Polystyrene beads with diameters of 3 to 15 mu caused target lysis, with a dose-response curve which typically went through a maximum and declined at high bead numbers. Maximal bead-redirected lysis by CTL was less efficient than that mediated by soluble antibody heteroconjugates of the same two antibodies. Bead-redirected target lysis was calcium dependent. These results are interpreted as a form of bystander lysis induced by the beads, since the target cell membrane is not directly crosslinked to the region of CTL activation. These observations thus favor a mechanism of lysis involving the polarized secretion of a locally acting lytic agent by CTL.     

Artificial induction of autophagy around polystyrene beads in nonphagocytic cells

Autophagy is an intracellular event that acts as an innate cellular defense mechanism to kill invading bacteria such as group A Streptococcus in nonphagocytic epithelial-like cells. The cellular events underlying autophagosome formation upon bacterial invasion remain unclear due to the biochemical complexity associated with uncharacterized bacterial components, and the difficulty of predicting the location as well as the timing of where/when autophagosome formation will take place. To overcome these problems, we monitored autophagosome formation in living nonphagocytic cells by inducing autophagy around artificial micrometer-sized beads instead of bacteria. Beads conjugated with bio-reactive molecules provide a powerful tool for examining biochemical properties in vitro. However, this technique has not been applied to living cells, except for phagocytes, because the beads cannot be easily incorporated into nonphagocytic cells. Here we report that micrometer-sized polystyrene beads coated with transfection reagents containing cationic lipids can be incorporated into nonphagocytic cells, and that autophagy can be efficiently induced around the beads in these cells. Monitoring the process of autophagosome formation for pH-sensitive fluorescent dye (pHrodo)-conjugated beads by fluorescence live cell imaging combined with correlative light and electron microscopy, we found that autophagosomes are formed around the beads after partial breakdown of the endosomal membrane. In addition, the beads were subsequently transferred to lysosomes within a couple of hours. Our findings demonstrate the cellular responses that lead to autophagy in response to pathogen invasion.     

Microinjected fluorescent polystyrene beads exhibit saltatory motion in tissue culture cells

Microinjected 0.26-micron fluorescent, carboxylated microspheres were found to display classical saltatory motion in tissue culture cells. The movement of a given particle was characterized by a discontinuous velocity distribution and was unaffected by the activity of adjacent particles. The microspheres were translocated at velocities of up to 4.7 micron/s and sometimes exhibited path lengths greater than 20 micron for a single saltation . The number of beads injected into a cell could range from a few to over 500 with no effect on the cell's ability to transport them. Neither covalent cross-linking nor preincubation of the polystyrene beads with various proteins inhibited the saltatory motion of the injected particles. The motion of the injected beads in cultured cells was reversibly inhibited by the microtubule poison nocodazole, under conditions in which actin-rich, nitrobenzoxadiazol - phallacidin -staining structures remain intact. Whole-cell high voltage electron microscopy of microinjected cells that were known to be moving the fluorescent microspheres revealed that the beads were embedded in the cytoplasmic matrix and did not appear to be membrane bound. The enhanced detectability of the fluorescent particles over endogenous organelles and the ability to modify the surfaces of the beads before injection may enable more detailed studies on the mechanism of saltatory particle motion.     

Growth of anchorage dependent mammalian cells on glycine-derivatized polystyrene in suspension culture

Summary Glycine-derivatized polystyrene beads were prepared and used as microcarriers to grow normal cells of human embryonic kidney, rhesus monkey kidney, and human foreskin fibroblasts in suspension cultures. Growth of the cells on polystyrene beads derivatized with other amino acids, peptides, and carboxylic acids also was investigated.     

Detection of platelet-associated IgG in chronic immune thrombocytopenic purpura using antibody-coated polyacrylamide beads

Platelet-associated IgG (PAIgG) was detected by means of anti-human IgG coated polyacrylamide beads ("Immunobeads") technique in 32 patients with chronic ITP. Both a direct test (with in vivo sensitized platelets) and an indirect test (with in vitro loaded platelets) were carried out. The percent of rosette forming beads was both in the direct test (41.2%) and in the indirect test (32.6%) significantly higher in the cases of chronic ITP patients than in the controls (2.5% and 3.2%, respectively). These results confirm the diagnostic value of this new, relatively simple and rapid method in routine clinical practice.     

Collection of acrosome-reacted human sperm using monoclonal antibody-coated paramagnetic beads.

A monoclonal antibody (MAb) against human acrosome-reacted sperm was attached to paramagnetic polystyrene beads. Human sperm prepared by the swim-up method were 1) incubated in m-BWW, 2) incubated and ionophore treated, or 3) incubated with 5% seminal fluid. After treatment, sperm were mixed with the beads and incubated for 1 hr. Variously treated sperm showed different binding abilities to the beads. Sperm bound to the beads were collected by a magnet and subjected to triple staining. Most of the collected sperm were acrosome reacted. The results suggested that the beads can be used to estimate the acrosomal status of sperm, and that the use of antibody-coated paramagnetic beads provides a convenient way of collecting acrosome-reacted sperm. The acrosomal status detected by the beads was also compared with the ability of sperm to fuse with zona-free hamster eggs. It was found that greater bead-binding ability correlated with more sperm fusing with zona-free hamster eggs.     

Fibronectin-mediated binding and phagocytosis of polystyrene latex beads by baby hamster kidney cells

The binding and phagocytosis of fibronectin (pFN)-coated latex beads by baby hamster kidney (BHK) cells was studied as a function of fibronectin concentration and bead diameter. Cells were incubated with radioactive pFN-coated beads, and total bead binding (cell surface or ingested) was measured as total radioactivity associated with the cells. Of the bound beads, those that also were phagocytosed were distinguished by their insensitivity to release from the cells by trypsin treatment. In continuous incubations, binding of pFN-coated beads to cells occurred at 4 degrees C or 37 degrees C, but phagocytosis was observed only at 37 degrees C. In addition, degradation of 3H-pFN from ingested beads occurred at 37 degrees C, as shown by the release of trichloroacetic acid-soluble radioactivity into the incubation medium. When the fibronectin density on the beads was varied, binding at 4 degrees C and ingestion at 37 degrees C were found to have the same dose-response dependencies, which indicated that pFN densities that permitted bead binding were sufficient for phagocytosis to occur. The fibronectin density for maximal binding of ingestion was approximately 250 ng pFN/cm2. When various sized beads (0.085-1.091 micron), coated with similar densities of pFN, were incubated with cells at 4 degrees C, no variation in binding as a function of bead size was observed. Under these conditions, the absolute amount of pFN ranged from less than 100 molecules on the 0.085-micron beads to greater than 15,000 molecules on the 1.091-micron beads. Based upon these results it can be concluded that the critical parameter controlling fibronectin-mediated binding of latex beads by BHK cells is the spacing of the pFN molecules on the beads. Correspondingly, it can be suggested that the spacing between pFN receptors on the cell surface that is optimal for multivalent interactions to occur is approximately 18 nM. When phagocytosis of various sized beads was compared, it was found that the largest beads were phagocytosed slightly better (two fold) than the smallest beads. This occurred both in continuous incubations of cells with beads and when the beads were prebound to the cells. Finally, the kinetic constants for the binding of 0.085 microM pFN-coated beads to the cells were analyzed. There appeared to be approximately 62,000 binding sites and the KD was 4.03 X 10(-9) M. Assuming a bivalent interaction, it was calculated that BHK cells have approximately 120,000 pFN receptors/cell and the binding affinity between pFN and its receptor is approximately 6 X 10(-5) M.     

Reversible immobilization of glucoamylase onto magnetic polystyrene beads with multifunctional groups

A novel and simple process for the surface functionalization of micron-sized monodisperse magnetic polystyrene (PS) microbeads was reported. The polystyrene seed particles were prepared prior to the dispersion polymerization method. Afterwards, series of surface chemical modifications on polystyrene microspheres were conducted, and three end-functional microspheres with carboxyl, imidazolyl and sulphydryl groups were obtained. The functional magnetic polystyrene microspheres were prepared by impregnation and subsequent precipitation of ferric and ferrous ions into the polystyrene particles. Finally, the functional magnetic polystyrene was used for the reversible immobilization of glucoamylase via metal-affinity adsorption. The results indicated that the obtained immobilized glucoamylase presented excellent reusability, applicability, magnetic response and regeneration of supports. The magnetic PS microspheres retained >65% of its initial activity at 65 °C over 6 h; and the lowest residual activity of immobilized glucoamylase prepared by regenerated supports still remained about 50% of the initial activity after the 10th cycles.     

Preparation of cassava starch grafted with polystyrene by suspension polymerization

Cassava starch grafted with polystyrene (PS-g-starch) copolymer was synthesized via free-radical polymerization of styrene by using suspension polymerization technique. Potassium persulfate (PPS) was used as an initiator and water was used as a medium. The graft copolymer was characterized by Fourier transform infrared spectroscopy, differential scanning calorimetry, thermal gravimetric analysis, X-ray diffraction and scanning electron microscopy. The sub-micron spherical beads of PS were observed on the surface of starch granules. SEM micrographs showed porous patches of PS adhering on the starch granules after Soxhlet extraction. FTIR spectra also indicated the presence of PS-g-starch copolymer. XRD analysis exhibited insignificant changes in crystalline structure and degree of crystallinity. The effects of starch:styrene weight ratio, amount of PPS, reaction time and reaction temperature on the percentage of grafting – G (%), were investigated. G (%) increased with increasing starch content. Other variables showed their own individual optimal values. The optimum condition yielding 31.47% of G (%) was derived when the component ratio was 1:3 and reaction temperature and time were 50 °C and 2 h, respectively. Graft copolymerization did not change granular shape and crystallinity of starch. This study demonstrated the capability of polymerization of styrene monomer on the granular starch without emulsifier and the synthesis of graft copolymer without gelatinization of starch.     

Evaluation of alternatives to expanded polystyrene beads for mosquito control

Expanded polystyrene (EPS) beads have been shown to be an effective tool for controlling immature stages of mosquitoes, as well as preventing oviposition by adults. Polystyrene does not biodegrade quickly, resulting in some concerns about its effect on the environment. A potential solution is the use of biodegradable materials that cover the surface of mosquito breeding sites in the same way as EPS beads. Two candidates are polylactic acid (PLA) beads and corn starch shreds. Larval mortality and adult emergence of Culex quinquefasciatus Say (Diptera: Culicidae) were monitored in bowls with each of four treatments: EPS beads, PLA beads, corn starch shreds and a control. The PLA beads were as effective as EPS beads at preventing mosquito emergence, whereas the shredded corn starch treatment resulted in significantly higher rates of emergence to the control. Similarly, EPS and PLA beads resulted in 100% mortality after 10 days, while there was low mortality of larvae in the corn starch (9%) and control treatments (20%). PLA beads provided similar levels of mortality and reduction in adult emergence as EPS beads. However, the production requirements of PLA beads may limit its use in field conditions.     

Development of monoclonal antibody-coated immunomagnetic beads for separation and detection of norovirus (genogroup II) in faecal extract samples

Aims:  The aim of this study is to develop an RT-PCR assay combined with immunomagnetic beads (IMS/RT-PCR) coating monoclonal antibody (Mab) for separation and detection of norovirus (genogroup II) in faecal samples. We furthermore compare its detection limits with IMS/RT-PCR using polyclonal antibody (Pab) and the TRIzol extraction method followed by RT-PCR (TRIzol-RT-PCR).
Methods and Results:  Mab-coated beads and Pab-coated beads were added to a series of tenfold dilutions of faecal extract containing norovirus in 1 ml PBS. After incubation and collection, the RNA was released by heating from virus separated by beads. The tenfold dilutions of faecal were also extracted with TRIzol reagent. The RNA was used as the template for RT-PCR detection (primers: JV12–JV13). IMS/RT-PCR using Mab showed an endpoint in the 10⁻⁷ dilution and was 10² times more sensitive than IMS/RT-PCR using Pab and was at least 10³ times more sensitive than TRIzol-RT-PCR method.
Conclusions:  IMS/RT-PCR using Mab proved to be a more sensitive method of noroviruses (NVs) detection than IMS/RT-PCR using Pab and the TRIzol-RT-PCR method.
Significance and Impact of the Study:  This is the first study to detect NVs with IMS/RT-PCR using Mab, and could serve as a model for future assays when broadly reactive NVs-specific Mabs are developed.     

Kinetics of invertase immobilised on poly(phe-lys) coated polystyrene beads

Summary Surface of polystyrene beads was modified by poly(phe-lys) for invertase immobilisation. The optimum immobilisation conditions of invertase were; 0.01% (w/v) poly(phe-lys), 2% (v/v) glutaraldehyde at 25 °C and pH 4.5. The kinetics of sucrose hydrolysis by free and immobilised invertase in a batch reactor at pH 4.5 and 55 °C gave K_m and V_max values for sucrose with free and immobilised invertase of 81, 114 mM and 10.1, 9.2 mol glucose/min.mg enzyme, respectively. The deactivation rate constants of free and immobilised invertase were 0.0347 and 0.0098 min^–1, respectively.     

Immunochemical subfractionation of a microsomal fraction of rat liver with antibody-coated Staphylococcus aureus cells

The procedure for immunochemical adsorption of vesicles with specific antigen on their outer surfaces was improved. When microsomal vesicles were mixed with Staphylococcus aureus cells coated with the antibody against NADPH-cytochrome c reductase, more than 90% of the enzyme activity was adsorbed on the cell, whereas, only about 10% of the activity was adsorbed on cells coated with the same amount of anti-ovalbumin antibody. NADH-cytochrome c reductase and aldehyde dehydrogenase activities were adsorbed on the cell to the same extent as was NADPH-cytochrome c reductase activity. Under this condition, there was no adsorption of the activities of the marker enzymes of lysosomes and Golgi apparatus, whereas large amounts of the activities of the plasma membrane enzymes were adsorbed. The specific activity of NADPH-cytochrome c reductase in the adsorbed vesicles from the microsomal fractions increased considerably. In contrast, marker enzymes of the Golgi or of the plasma membranes could be enriched in unadsorbed vesicles from the Golgi fractions.     

Targeting of monoclonal antibody-coated liposomes to sheep red blood cells

A monoclonal mouse anti-sheep red blood cell specific antibody IgG_2b was esterified with palmitic acid which served as a hydrophobic anchor for successfull incorporation into the liposomal membrane. The formation of coated liposomes by dialyzing the mixed antibody/lipid/detergent micelles against phosphate buffer was simplified b by using the same detergent as for the antibody derivatization. No purification step of any intermediate product was necessary. Targeting of the resulting vesicles to sheep red blood cells occured with high efficiency compared with control liposomes. The uptake was fast and specific as demonstrated with sheep and horse red blood cells by the use of radioactively labelled liposomes and by scanning electron microscopy.     

Use of magnetic beads for Gram staining of bacteria in aqueous suspension.

A Gram staining technique was developed using monodisperse magnetic beads in concentrating bacteria in suspension for downstream application. The technique does not require heat fixation of organisms, electrical power, or a microscope. Gram-negative and Gram-positive bacteria were identified macroscopically based on the colour of the suspension. The bacteria concentrated on magnetic beads may also be identified microscopically.     

High sensitivity identification of membrane proteins by MALDI TOF-MASS spectrometry using polystyrene beads

Membrane proteins play a large variety of functions in life and represent 30% of all genomes sequenced. Due to their hydrophobic nature, they are tightly bound to their biological membrane, and detergents are always required to extract and isolate them before identification by mass spectrometry (MS). The latter, however remains difficult. Peptide mass fingerprinting methods using techniques such as MALDI-TOF MS, for example, have become an important analytical tool in the identification of proteins. However, PMF of membrane proteins is a real challenge for at least three reasons. First, membrane proteins are naturally present at low levels; second, most of the detergents strongly inhibit proteases and have deleterious effects on MALDI spectra; and third, despite the presence of detergent, membrane proteins are unstable and often aggregate. We took the mitochondrial uncoupling protein 1 (UCP1) as a model and showed that differential acetonitrile extraction of tryptic peptides combined with the use of polystirene Bio-Beads triggered high resolution of the MALDI-TOF identification of mitochondrial membrane proteins solubilized either with Triton-X100 or CHAPS detergents.