Recombination of hybrid target sites by binary combinations of Flp variants: mutations that foster interprotomer collaboration and enlarge substrate tolerance

Strategies of directed evolution and combinatorial mutagenesis applied to the Flp site-specific recombinase have yielded recombination systems that utilize bi-specific hybrid target sites. A hybrid site is assembled from two half-sites, each harboring a distinct binding specificity. Satisfying the two specificities by a binary combination of Flp variants, while necessary, may not be sufficient to elicit recombination. We have identified amino acid substitutions that foster interprotomer collaboration between partner Flp variants to potentiate strand exchange in hybrid sites. One such substitution, A35T, acts specifically in cis with one of the two partners of a variant pair, Flp(K82M) and Flp(A35T, R281V). The same A35T mutation is also present within a group of mutations that rescue a Flp variant, Flp(Y60S), that is defective in establishing monomer-monomer interactions on the native Flp target site. Strikingly, these mutations are localized to peptide regions involved in interdomain and interprotomer interactions within the recombination complex. The same group of mutations, when transferred to the context of wild-type Flp, can relax its specificity to include non-native target sites. The hybrid Flp systems described here mimic the naturally occurring XerC/XerD recombination system that utilizes two recombinases with distinct DNA binding specificities. The ability to overcome the constraints of binding site symmetry in Flp recombination has important implications in the targeted manipulations of genomes.     

Functional analysis of box I mutations in yeast site-specific recombinases Flp and R: pairwise complementation with recombinase variants lacking the active-site tyrosine.

The site-specific recombinases Flp and R from Saccharomyces cerevisiae and Zygosaccharomyces rouxii, respectively, are related proteins that belong to the yeast family of site-specific recombinases. They share approximately 30% amino acid matches and exhibit a common reaction mechanism that appears to be conserved within the larger integrase family of site-specific recombinases. Two regions of the proteins, designated box I and box II, also harbor a significantly high degree of homology at the nucleotide sequence level. We have analyzed the properties of Flp and R variants carrying point mutations within the box I segment in substrate-binding, DNA cleavage, and full-site and half-site strand transfer reactions. All mutations abolish or seriously diminish recombinase function either at the substrate-binding step or at the catalytic steps of strand cleavage or strand transfer. Of particular interest are mutations of Arg-191 of Flp and R, residues which correspond to one of the two invariant arginine residues of the integrase family. These variant proteins bind substrate with affinities comparable to those of the corresponding wild-type recombinases. Among the binding-competent variants, only Flp(R191K) is capable of efficient substrate cleavage in a full recombination target. However, this protein does not cleave a half recombination site and fails to complete strand exchange in a full site. Strikingly, the Arg-191 mutants of Flp and R can be rescued in half-site strand transfer reactions by a second point mutant of the corresponding recombinase that lacks its active-site tyrosine (Tyr-343). Similarly, Flp and R variants of Cys-189 and Flp variants at Asp-194 and Asp-199 can also be complemented by the corresponding Tyr-343-to-phenylalanine recombinase mutant.     

A dual reporter screening system identifies the amino acid at position 82 in Flp site-specific recombinase as a determinant for target specificity

We have developed a dual reporter screen in Escherichia coli for identifying variants of the Flp site-specific recombinase that have acquired reactivity at an altered target site (mFRT). In one reporter, the lacZα gene segment is flanked by mFRTs in direct orientation. In the other, the red fluorescence protein (RFP) gene is flanked by the native FRTs. Hence, the color of a colony on an X-gal indicator plate indicates the recombination potential of the variant Flp protein expressed in it: blue if no recombination or only FRT recombination occurs, red if only mFRT recombination occurs and white if both FRT and mFRT recombinations occur. The scheme was validated by identification and in vivo characterization of Flp variants that show either relaxed specificity (active on FRT and mFRT) or moderately shifted specificity toward mFRT. We find that alteration of Lys-82 to Met, Thr, Arg or His enables the corresponding Flp variants to recombine FRT sites as well as altered FRT sites containing a substitution of G-C by C-G at position 1 of the Flp binding element (mFRT11). In contrast, wild-type Flp has no detectable activity on mFRT11. When Lys-82 is replaced by Tyr, the resulting Flp variant shows a small but reproducible preference for mFRT11 over FRT. However, this preference for mFRT11 is nearly lost when Tyr-82 is substituted by Phe.     

Evolution of variants of yeast site-specific recombinase Flp that utilize native genomic sequences as recombination target sites

As a tool in directed genome manipulations, site-specific recombination is a double-edged sword. Exquisite specificity, while highly desirable, makes it imperative that the target site be first inserted at the desired genomic locale before it can be manipulated. We describe a combination of computational and experimental strategies, based on the tyrosine recombinase Flp and its target site FRT, to overcome this impediment. We document the systematic evolution of Flp variants that can utilize, in a bacterial assay, two sites from the human interleukin 10 gene, IL10, as recombination substrates. Recombination competence on an end target site is acquired via chimeric sites containing mixed sequences from FRT and the genomic locus. This is the first time that a tyrosine site-specific recombinase has been coaxed successfully to perform DNA exchange within naturally occurring sequences derived from a foreign genomic context. We demonstrate the ability of an Flp variant to mediate integration of a reporter cassette in Escherichia coli via recombination at one of the IL10-derived sites.     

Chimeras of the Flp and Cre recombinases: tests of the mode of cleavage by Flp and Cre

The Flp and Cre recombinases are members of the integrase family of tyrosine recombinases. Each protein consists of a 13 kDa NH(2)-terminal domain and a larger COOH-terminal domain that contains the active site of the enzyme. The COOH-terminal domain also contains the major determinants for the binding specificity of the recombinase to its cognate DNA binding site. All family members cleave the DNA by the attachment of a conserved nucleophilic tyrosine residue to the 3'-phosphate group at the sites of cleavage. In order to gain further insights into the determinants of the binding specificity and modes of cleavage of Flp and Cre, we have made chimeric proteins in which we have fused the NH(2)-terminal domain of Flp to the COOH-terminal domain of Cre ("Fre") and the NH(2)-terminal domain of Cre to the COOH-terminal domain of Flp ("Clp"). These chimeras have novel binding specificities in that they bind strongly to hybrid sites containing elements from both the Flp and Cre DNA targets but poorly to the native target sites.In this study we have taken advantage of the unique binding specificities of Fre and Clp to examine the mode of cleavage by Cre, Flp, Fre and Clp. We find that the COOH-terminal domain of the recombinases determines their mode of cleavage. Thus Flp and Clp cleave in trans whereas Cre and Fre cleave in cis. These results agree with the studies of Flp and with the cocrystal structure of Cre bound to its DNA target site. They disagree with our previous findings that Cre could carry out trans cleavage. We discuss the variations in the experimental approaches in order to reconcile the different results.     

Bending-incompetent variants of Flp recombinase mediate strand transfer in half-site recombinations: role of DNA bending in recombination.

One key feature of the interaction of Flp recombinase with its target site (FRT) is the large bend introduced in the substrate as a result of protein binding. The extent of bending was found to depend on the phasing and spacing of the Flp monomers occupying the two Flp-binding elements (FBE) bordering the strand-exchange region (spacer) of the substrate. The relative mobilities of the Flp complexes formed by the two permuted substrate fragments, containing the FRT site near the end or in the middle, corresponded to a DNA bend of approx. 140 degrees when each of the two FBEs flanking the spacer was occupied by a protein monomer. The estimated bend angle was the same when the reference DNA fragment with the FRT site at the end was substituted by one with the site in the middle, but containing a 4-bp insertion within the spacer. We used a combination of wild-type Flp and Flp variants that were competent or incompetent in DNA bending, together with full, or half FRT sites, to ask whether bending is a conformational requirement for catalysis, namely cleavage and exchange of strands. We obtained the following results: in full-site (FRT) vs. full-site recombinations or in full-site vs. half-site (half FRT) recombinations, there was a large difference in the reactivity between Flp and a bending-incompetent Flp variant. This difference virtually disappeared when reactions were done with half-FRT sites. We conclude that bending is not a prerequisite for catalysis, but represents the manner in which the substrate accommodates the Flp protomer-protomer interactions that are pertinent to catalysis.     

Functional analysis of Box II mutations in yeast site-specific recombinases Flp and R. Significance of amino acid conservation within the Int family and the yeast sub-family.

The site-specific recombinases Flp and R from Saccharomyces cerevisiae and Zygosaccharomyces rouxii, respectively, are related proteins that share approximately 30% amino acid matches. They exhibit a common reaction mechanism that appears to be conserved within the larger Integrase family of site-specific recombinases. Two regions of the proteins, designated as Box I and Box II, harbor, in addition to amino acid conservation, a significantly high degree of nucleotide sequence homology within their coding segments. Box II also contains two amino acids, a histidine and an arginine, that are invariant throughout the Int family. We have performed functional analysis of Flp and R variants carrying point mutations within the Box II segment. Several positions within Box II can tolerate substitutions with no effect, or only modest effects on recombination. Alterations of the Int family residues, His305 and Arg308, in the R protein lead to the arrest of recombination at the strand cleavage or the strand exchange step. This is very similar to previously observed "step-arrest" phenotypes in Flp variants altered at these positions and has strong implications for the catalytic mechanism of recombination. Flp and R variants at His305 and His309 can be complemented in half-site strand transfer by a corresponding Tyr343 to phenylalanine variant. In contrast to Arg308 Flp variants, which are efficiently complemented in half-site strand transfer by Flp(Y343F), no strong complementation has been observed between Arg308 variants of R and R (Y343F).     

Functional expression of the Flp recombinase in Mycobacterium bovis BCG

Mycobacteria contain a large number of redundant genes whose functions are difficult to analyze in mutants because there are only two efficient antibiotic resistance genes available for allelic exchange experiments. Sequence-specific recombinbases such as the Flp recombinase can be used to excise resistance markers. Expression of the flp(e) gene from Saccharomyces cerevisiae is functional for this purpose in fast-growing Mycobacterium smegmatis but not in slow-growing mycobacteria such as M. bovis BCG or M. tuberculosis. We synthesized the flp(m) gene by adapting the codon usage to that preferred by M. tuberculosis. This increased the G+C content from 38% to 61%. Using the synthetic flp(m) gene, the frequency of removal of FRT-hyg-FRT cassette from the chromosome by the Flp recombinase was increased by more than 100-fold in M. smegmatis. In addition, 40% of all clones of M. bovis BCG had lost the hyg resistance cassette after transient expression of the flp(m) gene. Sequencing of the chromosomal DNA showed that excision of the FRT-hyg-FRT cassette by Flp was specific. These results show that the flp(m) encoded Flp recombinase is not only an improved genetic tool for M. smegmatis, but can also be used in slow growing mycobacteria such as M. tuberculosis for constructing unmarked mutations. Other more sophisticated applications in mycobacterial genetics would also profit from the improved Flp/FRT system.     

Tyr60 variants of Flp recombinase generate conformationally altered protein-DNA complexes. Differential activity in full-site and half-site recombinations

The tyrosine at position 60 of the Flp recombinase of the Saccharomyces cerevisiae plasmid, 2 mu circle, is invariant among site-specific recombinases of the "yeast plasmid family". Alterations of this residue give rise to Flp variants that show no recombination activity when assayed in vivo in Escherichia coli. Upon purification, they bind substrate, execute DNA cleavage and catalyze recombination. The efficiency of strand cleavage follows the order: Flp(Y60F) greater than Flp greater than Flp(Y60S) greater than Flp(Y60D); efficiency of recombination between Flp sites on a linear substrate and a circular one follows the order: Flp greater than Flp(Y60F) greater than Flp(Y60S) greater than Flp(Y60D). Methylation footprints of the DNA-protein complexes formed by two of the Flp variants, Flp(Y60S) and Flp(Y60D), do not show hypermethylation of the G residues within the substrate core that is characteristic of complexes formed by wild-type Flp. The third variant, Flp(Y60F), causes significant distortion (although less than wild-type Flp) of the substrate core, as indicated by enhanced G-methylation. Binding profiles with circularly permuted substrates indicate that Flp(Y60S) and Flp(Y60D), but not Flp(Y60F), are defective in bending substrate DNA. In recombination between two Flp half-sites, the variant proteins are significantly more active than in normal full-site recombination.     

Functional analysis of Arg-308 mutants of Flp recombinase. Possible role of Arg-308 in coupling substrate binding to catalysis

The arginine residue at position 308 in the Flp recombinase corresponds to the only invariant arginine within the Int family of recombinases. Alterations of this residue result in Flp variants that retain substrate recognition, but form weaker protein-DNA complexes than wild type Flp. Furthermore, their DNA cleavage activity is significantly diminished. A conservative change of R308K results in a functional Flp variant; however, this protein has a lowered temperature optimum for recombination. The Arg-308 mutants can be stabilized on the DNA substrate through cooperativity with a partner Flp mutant that is tight binding. Thus, interactions between Flp monomers must be a relevant feature of the normal recombination reaction.     

Half-site strand transfer by step-arrest mutants of yeast site-specific recombinase Flp.

The Flp recombinase of Saccharomyces cerevisae can mediate strand transfer within a half-site, between two half-sites and between a half-site and a full-site. The ability of "step-arrest" mutants of Flp to partake in half-site reactions has been examined. Arg308 variants of Flp, which show little or no strand cleavage in reactions with normal full-sites, execute significant levels of strand transfer in half-site reactions. On the other hand, His305 variants of Flp, which normally accumulate the strand cleavage product from full-sites but do not complete strand transfer, yield only minute amounts of strand transfer products from half-sites. As would be predicted, the step-arrest mutants are unable to produce "normal" or "reverse" recombinants between a half-site and a full-site. The Flp protein is able to form higher-order complexes in association with a half-site. The step-arrest mutants of Flp show specific defects in forming these complexes.     

Single molecule TPM analysis of the catalytic pentad mutants of Cre and Flp site-specific recombinases: contributions of the pentad residues to the pre-chemical steps of recombination

Cre and Flp site-specific recombinase variants harboring point mutations at their conserved catalytic pentad positions were characterized using single molecule tethered particle motion (TPM) analysis. The findings reveal contributions of these amino acids to the pre-chemical steps of recombination. They suggest functional differences between positionally conserved residues in how they influence recombinase-target site association and formation of ‘non-productive’, ‘pre-synaptic’ and ‘synaptic’ complexes. The most striking difference between the two systems is noted for the single conserved lysine. The pentad residues in Cre enhance commitment to recombination by kinetically favoring the formation of pre-synaptic complexes. These residues in Flp serve a similar function by promoting Flp binding to target sites, reducing non-productive binding and/or enhancing the rate of assembly of synaptic complexes. Kinetic comparisons between Cre and Flp, and between their derivatives lacking the tyrosine nucleophile, are consistent with a stronger commitment to recombination in the Flp system. The effect of target site orientation (head-to-head or head-to-tail) on the TPM behavior of synapsed DNA molecules supports the selection of anti-parallel target site alignment prior to the chemical steps. The integrity of the synapse, whose establishment/stability is fostered by strand cleavage in the case of Flp but not Cre, appears to be compromised by the pentad mutations.     

Wild-type Flp recombinase cleaves DNA in trans.

Site-specific recombinases of the Integrase family utilize a common chemical mechanism to break DNA strands during recombination. A conserved Arg-His-Arg triad activates the scissile phosphodiester bond, and an active-site tyrosine provides the nucleophile to effect DNA cleavage. Is the tyrosine residue for the cleavage event derived from the same recombinase monomer which provides the RHR triad (DNA cleavage in cis), or are the triad and tyrosine derived from two separate monomers (cleavage in trans)? Do all members of the family follow the same cleavage rule, cis or trans? Solution studies and available structural data have provided conflicting answers. Experimental results with the Flp recombinase which strongly support trans cleavage have been derived either by pairing two catalytic mutants of Flp or by pairing wild-type Flp and a catalytic mutant. The inclusion of the mutant has raised new concerns, especially because of the apparent contradictions in their cleavage modes posed by other Int family members. Here we test the cleavage mode of Flp using an experimental design which excludes the use of the mutant protein, and show that the outcome is still only trans DNA cleavage.     

Reactions of Cre with Methylphosphonate DNA: Similarities and Contrasts with Flp and Vaccinia Topoisomerase

Background

Reactions of vaccinia topoisomerase and the tyrosine site-specific recombinase Flp with methylphosphonate (MeP) substituted DNA substrates, have provided important insights into the electrostatic features of the strand cleavage and strand joining steps catalyzed by them. A conserved arginine residue in the catalytic pentad, Arg-223 in topoisomerase and Arg-308 in Flp, is not essential for stabilizing the MeP transition state. Topoisomerase or its R223A variant promotes cleavage of the MeP bond by the active site nucleophile Tyr-274, followed by the rapid hydrolysis of the MeP-tyrosyl intermediate. Flp(R308A), but not wild type Flp, mediates direct hydrolysis of the activated MeP bond. These findings are consistent with a potential role for phosphate electrostatics and active site electrostatics in protecting DNA relaxation and site-specific recombination, respectively, against abortive hydrolysis.

Methodology/Principal Findings

We have examined the effects of DNA containing MeP substitution in the Flp related Cre recombination system. Neutralizing the negative charge at the scissile position does not render the tyrosyl intermediate formed by Cre susceptible to rapid hydrolysis. Furthermore, combining the active site R292A mutation in Cre (equivalent to the R223A and R308A mutations in topoisomerase and Flp, respectively) with MeP substitution does not lead to direct hydrolysis of the scissile MeP bond in DNA. Whereas Cre follows the topoisomerase paradigm during the strand cleavage step, it follows the Flp paradigm during the strand joining step.

Conclusions/Significance

Collectively, the Cre, Flp and topoisomerase results highlight the contribution of conserved electrostatic complementarity between substrate and active site towards transition state stabilization during site-specific recombination and DNA relaxation. They have potential implications for how transesterification reactions in nucleic acids are protected against undesirable abortive side reactions. Such protective mechanisms are significant, given the very real threat of hydrolytic genome damage or disruption of RNA processing due to the cellular abundance and nucleophilicity of water.     

Symmetric DNA sites are functionally asymmetric within Flp and Cre site-specific DNA recombination synapses

Flp and Cre-mediated recombination on symmetrized FRT and loxP sites, respectively, in circular plasmid substrates yield both DNA inversion and deletion. However, upon sequestering three negative supercoils outside the recombination complex using the resII-resIII synapse formed by Tn3 resolvase and the LER synapse formed by phage Mu transposase in the case of Flp and Cre, respectively, the reactions are channeled towards inversion at the expense of deletion. The inversion product is a trefoil, its unique topology being conferred by the external resolvase or LER synapse. Thus, Flp and Cre assign their symmetrized substrates a strictly antiparallel orientation with respect to strand cleavage and exchange. These conclusions are supported by the product profiles from tethered parallel and antiparallel native FRT sites in dilution and competition assays. Furthermore, the observed recombination bias favoring deletion over inversion in a nicked circular substrate containing two symmetrized FRT sites is consistent with the predictions from Monte Carlo simulations based on antiparallel synapsis of the DNA partners.     

Expression of Flp Protein in a Baculovirus/Insect Cell System for Biotechnological Applications

The Saccharomyces cerevisiae Flp protein is a site-specific recombinase that recognizes and binds to the Flp recognition target (FRT) site, a specific sequence comprised of at least two inverted repeats separated by a spacer. Binding of four monomers of Flp is required to mediate recombination between two FRT sites. Because of its site-specific cleavage characteristics, Flp has been established as a genome engineering tool. Amongst others, Flp is used to direct insertion of genes of interest into eukaryotic cells based on single and double FRT sites. A Flp-encoding plasmid is thereby typically cotransfected with an FRT-harboring donor plasmid. Moreover, Flp can be used to excise DNA sequences that are flanked by FRT sites. Therefore, the aim of this study was to determine whether Flp protein and its step-arrest mutant, FlpH305L, recombinantly expressed in insect cells, can be used for biotechnological applications. Using a baculovirus system, the proteins were expressed as C-terminally 3?×?FLAG-tagged proteins and were purified by anti-FLAG affinity selection. As demonstrated by electrophoretic mobility shift assays (EMSAs), purified Flp and FlpH305L bind to FRT-containing DNA. Furthermore, using a cell assay, purified Flp was shown to be active in recombination and to mediate efficient insertion of a donor plasmid into the genome of target cells. Thus, these proteins can be used for applications such as DNA-binding assays, in vitro recombination, or genome engineering.     

DNA recombination and RNA cleavage activities of the Flp protein: roles of two histidine residues in the orientation and activation of the nucleophile for strand cleavage.

Using a combination of DNA and hybrid DNA-RNA substrates, we have analyzed the mechanism of phosphoryl transfer by the Flp site-specific recombinase in three different reactions: DNA strand breakage and joining, and two types of RNA cleavage activities. These reactions were then used to characterize Flp variants altered at His309 and His345, amino acid residues that are in close proximity to two key catalytic residues (Arg308 and Tyr343). These histidine residues are important for strand cutting by Tyr343, the active-site nucleophile of Flp, but neither residue contributes to the type II RNA cleavage activity or to the strand-joining reaction in a pre-cleaved substrate. Strand cleavage reactions using small, diffusible nucleophiles indicate that this histidine pair contributes to the correct positioning and activation of Tyr343 within the shared active site of Flp. The implications of these results are evaluated against the recently solved crystal structure of Flp in association with a Holliday junction.     

Chemical probe and missing nucleoside analysis of Flp recombinase bound to the recombination target sequence.

The Flp protein catalyzes a site-specific recombination reaction between two 47 bp DNA sites without the assistance of any other protein or cofactor. The Flp recognition target (FRT) site consists of three nearly identical sequences, two of which are separated by an 8 bp spacer sequence. In order to gain insight into this remarkable protein-DNA interaction we used a variety of chemical probe methods and the missing nucleoside experiment to examine Flp binding. Hydroxyl radical footprints of Flp bound to a recombinationally-competent site fall on opposite faces of canonical B-DNA. The 8 bp spacer region between the two Flp binding sites becomes reactive towards 5-phenyl-1,10-phenanthroline.copper upon Flp binding, indicating that once bound by Flp, this segment of DNA is not in the B-form. Missing nucleoside analysis reveals that within each binding site the presence of two nucleosides on the top strand and four on the bottom, are required for formation of a fully-occupied FRT site. In contrast, loss of any nucleoside in the three binding sites in the FRT interferes with formation of lower-occupancy complexes. DNA molecules with gaps in the 8 bp spacer region are over-represented in complexes with either two or three binding sites occupied by Flp, evidence that DNA flexibility facilitates the cooperative interaction of Flp protomers bound to a recombinationally-active site.     

Half-site recombinations mediated by yeast site-specific recombinases Flp and R.

The Flp recombinase of Saccharomyces cerevisae and the related R recombinase of Zygosaccharomyces rouxii can efficiently catalyze strand cleavage and strand exchange reactions in half recombination sites. A half-site consists of one recombinase binding element, a recombinase cleavage site on one strand and a 5' spacer hydroxyl group on the other that can initiate the strand exchange reaction. We have studied the various types of strand exchanges that half-sites can participate in. Reaction between a left half-site and a right half-site generates a full recombination site. Strand transfer between two left half-sites or between two right half-sites produces pseudo-full-sites. Strand transfer within a half-site results in a stem-loop or hairpin product. The half-site strand transfer reaction is fairly indifferent to the spacer sequence of the substrate per se and is less sensitive to variations in spacer lengths than a full-site recombination reaction. The optimal spacer length of eight to ten nucleotides observed for the Flp half-site reaction likely permits the most productive catalytic interactions between two Flp monomers bound to each of two partner half-sites. When reacted with a full-site, the half-site can give rise to a normal or reverse recombinant, corresponding to homologous or non-homologous alignments of the spacer sequences during substrate synapsis. The contrary recombination (resulting from non-homologous spacer alignment), whose level is low relative to normal recombination, is partly suppressed when the half-site spacer ends in a 5'-phosphate rather than a 5'-hydroxyl group. Thus, the early steps of recombination, namely synapsis and initial stand transfer, are not dependent on complete spacer homology between the two recombining substrates. The selection of properly aligned substrate partners must occur at the homology dependent branch migration step. In reactions containing a mixture of Flp and R half-sites, Flp and R catalyze strand transfer, almost exclusively, within or between their respective cognate substrates. However, under conditions where self-crosses are inhibited, strand exchange between a Flp half-site and an R half-site appears to be stimulated by a combination of R and Flp.     

Active-site assembly and mode of DNA cleavage by Flp recombinase during full-site recombination.

A combination of half-site substrates and step arrest mutants of Flp, a site-specific recombinase of the integrase family, had earlier revealed the following features of the half-site recombination reaction. (i) The Flp active site is assembled by sharing of catalytic residues from at least two monomers of the protein. (ii) A Flp monomer does not cleave the half site to which it is bound (DNA cleavage in cis); rather, it cleaves a half site bound by a second Flp monomer (DNA cleavage in trans). For the lambda integrase (Int protein), the prototype member of the Int family, catalytic complementation between two active-site mutants has been observed in reactions with a suicide attL substrate. By analogy with Flp, this observation is strongly suggestive of a shared active site and of trans DNA cleavage. However, reactions with linear suicide attB substrates and synthetic Holliday junctions are more compatible with cis than with trans DNA cleavage. These Int results either argue against a common mode of active-site assembly within the Int family or challenge the validity of Flp half sites as mimics of the normal full-site substrates. We devised a strategy to assay catalytic complementation between Flp monomers in full sites. We found that the full-site reaction follows the shared active-site paradigm and the trans mode of DNA cleavage. These results suggest that within the Int family, a unitary chemical mechanism of recombination is achieved by more than one mode of physical interaction among the recombinase monomers.