Birth weight,adult body size,and risk of colorectal cancer

BackgroundEvidence suggests that birth weight may be associated with colorectal cancer (CRC) risk later in life. Whether the association is mediated by adult body size remains unexamined.MethodCox proportional hazards models (Hazard Ratio (HR) and 95 % Confidence Intervals (CI)) were used to evaluate the association between self-reported birth weight (<6 lbs, 6-<8 lbs, ≥8 lbs) and CRC risk among 70,397 postmenopausal women from the Women’s Health Initiative. Further, we assessed whether this association was mediated by adult body size using multiple mediation analyses.ResultsCompared with birth weights of 6-< 8 lbs, birth weight ≥ 8 lbs was associated with higher CRC risk in postmenopausal women (HR = 1.31, 95 % CI 1.16–1.48). This association was significantly mediated by adult height (proportion mediated =11.4 %), weight (11.2 %), waist circumference (10.9 %), and body mass index at baseline (4.0 %). The joint effect of adult height and weight explained 21.6 % of this positive association.ConclusionOur data support the hypothesis that the intrauterine environment and fetal development may be related to the risk of developing CRC later in life. While adult body size partially explains this association, further investigation is required to identify other factors that mediate the link between birth weight and CRC.     

A comparative perspective on longevity: the effect of body size dominates over ecology in moths

Both physiologically and ecologically based explanations have been proposed to account for among‐species differences in lifespan, but they remain poorly tested. Phylogenetically explicit comparative analyses are still scarce and those that exist are biased towards homoeothermic vertebrates. Insect studies can significantly contribute as lifespan can feasibly be measured in a high number of species, and the selective forces that have shaped it may differ largely between species and from those acting on larger animals. We recorded adult lifespan in 98 species of geometrid moths. Phylogenetic comparative analyses were applied to study variation in species‐specific values of lifespan and to reveal its ecological and life‐history correlates. Among‐species and between‐gender differences in lifespan were found to be notably limited; there was also no evidence of phylogenetic signal in this trait. Larger moth species were found to live longer, with this result supporting a physiological rather than ecological explanation of this relationship. Species‐specific lifespan values could not be explained by traits such as reproductive season and larval diet breadth, strengthening the evidence for the dominance of physiological determinants of longevity over ecological ones.     

Bergmann's rule does not apply to geometrid moths along an elevational gradient in an Andean montane rain forest

Aim Bergmann's rule generally predicts larger animal body sizes with colder climates. We tested whether Bergmann's rule at the interspecific level applies to moths (Lepidoptera: Geometridae) along an extended elevational gradient in the Ecuadorian Andes. Location Moths were sampled at 22 sites in the province Zamora‐Chinchipe in southern Ecuador in forest habitats ranging from 1040 m to 2677 m above sea level. Methods Wingspans of 2282 male geometrid moths representing 953 species were measured and analysed at the level of the family Geometridae, as well as for the subfamily Ennominae with the tribes Boarmiini and Ourapterygini, and the subfamily Larentiinae with the genera Eois, Eupithecia and Psaliodes. Results Bergmann's rule was not supported since the average wingspan of geometrid moths was negatively correlated with altitude (r = ?0.59, P < 0.005). The relationship between body size and altitude in Geometridae appears to be spurious because species of the subfamily Larentiinae are significantly smaller than species of the subfamily Ennominae and simultaneously increase in their proportion along the gradient. A significant decrease of wingspan was also found in the ennomine tribe Ourapterygini, but no consistent body size patterns were found in the other six taxa studied. In most taxa, body size variation increases with altitude, suggesting that factors acting to constrain body size might be weaker at high elevations. Main conclusions The results are in accordance with previous studies that could not detect consistent body size patterns in insects at the interspecific level along climatic gradients.     

Posterior tooth size, body size, and diet in South African gracile Australopithecines

A model relating relative size of the posterior teeth to diet is suggested for forest and savanna primates and Homo. Relative tooth size is calculated for the South African gracile australopithecine sample using posterior maxillary area sums and size estimates based on four limb bones. A number of limbs were shown to be non-hominid. Comparisons show the South African gracile sample apparently adapted to a very heavily masticated diet with relative tooth size significantly greater than any living hominoid. Periodic intensive utilization of grains and roots combined with scavenged animal protein are suggested as the most likely dietary reconstruction.     

Quantifying income breeding: using geometrid moths as an example

Although the general concept of capital vs. income breeding has become widely used in insect ecology, finding easy‐to‐measure indices for quantifying the role of larval‐ vs. adult‐derived nutrients in egg production has remained a challenge. When searching for possible candidates for this task, we evaluated the applicability of three morphometric ratios to be measured on freshly eclosed adults: (1) relative size of female abdomen, (2) sexual size dimorphism, and (3) proportion of volume of mature eggs relative to total volume of female abdomen. We report the values of these indices in five species of geometrid moths [Hypomecis punctinalis Scopoli, Ematurga atomaria L., Selenia tetralunaria Hufnagel, Semiothisa clathrata L., and Epirrhoe alternata Müller (all Lepidoptera: Geometridae)] and compare them to the degrees of income breeding measured directly by oviposition experiments. As a comparison, we also recorded the ovigeny index and the effect of income on lifespan. All morphometric indices varied considerably between the species studied, and, as predicted, the values of all three proposed indices were higher in the more capital‐breeding species. The only exception to this pattern was a low proportion of mature eggs in abdomens in one primarily capital‐breeding species, S. tetralunaria. Unlike other capital breeders, this species also proved to be largely synovigenic, indicating that capital breeding and pro‐ovigeny are not strictly linked. The reproductive traits measured concord with ecological niches occupied by the species studied: the oligophagous meadow dwellers were largely income breeding and synovigenic, whereas the polyphagous forest dwellers were capital breeders. The high and predictable among‐species variation in egg‐production strategies suggests that geometrid moths form a promising target group for comparative studies on respective traits. Simple anatomical indices, in turn, appear to be applicable as easy‐to‐record proxies of egg production strategies.     

Montane Andean rain forests are a global diversity hotspot of geometrid moths

Aim Andean forests are known to be a major diversity hotspot for vascular plants and vertebrates, but virtually nothing is known about the diversity of arthropods. We examined whether montane rain forests in southern Ecuador are also a diversity hotspot for arthropods, and chose geometrid moths as a model group. Location The study area in southern Ecuador (Province Zamora‐Chinchipe, 79° W, 04° S) covers c. 40 km², with 39 collecting sites within an elevational range of 1040–2677 m a.s.l. Thirty‐five of the sites were situated in an area c. 2.5 km². Additional qualitative sampling was carried out in the same area and up to an elevation of 3100 m. Methods Nocturnal moths were collected quantitatively and qualitatively using portable light towers consisting of two 15 W fluorescent tubes, and diurnal moths were collected qualitatively using an insect net. Insects were sampled in six fieldwork periods in the years 1999–2003. As diversity measures, Fisher's alpha of the log‐series distribution as well as eight estimators of total species richness were applied. Results A total of 1266 species were recorded, 63% of which were identified to named species, whereas the remainder are likely to include many undescribed species. Quantitative samples at light towers collected 35,238 specimens representing 1223 species. The extrapolated species number for these data is 1420 (incidence coverage estimator). Twenty‐one additional nocturnal species and 22 exclusively diurnal species were sampled qualitatively at elevations between 1040 and 3100 m. The pooled value of Fisher's alpha for all quantitative samples is 246 ± 3. Main conclusions The diversity of Geometridae documented here is much higher than anywhere else in the world, even without the inclusion of additional species from adjacent lowland rain forests. The number of recorded species in this small area corresponds to more than 6% of the known world fauna of geometrid moths. Our study emphasizes the importance of protecting the remaining montane Andean rain forests. For setting priorities in conservation, more studies on insect diversity are urgently required in other regions of the Andes, since montane forests are being destroyed at an alarming rate.     

Beta diversity of geometrid moths (Lepidoptera: Geometridae) in an Andean montane rainforest

Abstract. Turnover in species composition of the extremely species‐rich family Geometridae (Lepidoptera) was investigated along an elevational gradient ranging from 1040 m to 2677 m above sea level. Moths were sampled using weak light traps (30 W) in three field periods in 1999 and 2000 in an Andean montane rainforest in the province of Zamora‐Chinchipe in southern Ecuador. A total of 13 938 specimens representing 1010 species were analysed. Similarities of ensembles of all geometrid moths and of the subfamilies Ennominae and Larentiinae were calculated using the NESS index (with m_max). Ordinations performed using nonmetric multidimensional scaling (NMDS) and correspondence analysis depicted a gradual change of the ensembles along the altitudinal gradient. Extracted ordination scores significantly correlate with altitude (?0.97 ≤ r ≤ ?0.95, P < 0.001) and with ambient air temperature (0.93 ≤ r ≤ 0.97, P < 0.001). Temperature is therefore assumed to be the most important abiotic determinant responsible for the species turnover among the moths. Matrix correlation tests were performed in order to compare faunal matrices with matrices derived from available environmental factors. Both tree diversity and vegetation structure significantly correlate with faunal data, but tree diversity explains considerably more of the data variability (range: Mantel r = 0.81–0.83, P < 0.001) than vegetation structure (range: Mantel r = 0.35, P < 0.005 to r = 0.43, P < 0.001). Tree diversity also changes gradually and scores of the first NMDS dimension are highly significantly correlated with altitude (r = 0.98, P < 0.001). A common underlying factor such as ambient temperature might also be responsible for such vegetation changes. Additionally, simulated model data was developed that assumed a constant turnover of moth species and equal elevational ranges of all species involved. Despite the simplicity of the models, they fit empirical data very well (Mantel r > 0.80 and P < 0.001 in all models).     

Faunal composition of geometrid moths changes with altitude in an Andean montane rain forest

Aim The objective of this study was to describe and interpret the changes in faunal composition in the moth family Geometridae (Lepidoptera) along a small‐scale elevational gradient in a tropical montane rain forest. This gradient was compared with a large‐scale latitudinal gradient in Europe. Location Investigations were carried out in the province Zamora‐Chinchipe in southern Ecuador along a gradient ranging from 1040 to 2677 m above sea level at twenty‐two sites. Methods Moths were sampled with light‐traps in three field periods in 1999 and 2000 and subsequently sorted and determined to species or morphospecies. Results We analysed 13,938 specimens representing 1010 species of geometrid moths. The proportional contribution of subtaxa to the local geometrid fauna changes along the elevational gradient at all systematic levels considered. While proportions of species of the subfamilies Ennominae, Sterrhinae and Geometrinae significantly decrease, the proportion of Larentiinae increases with increasing altitude. Changes also occur within the subfamilies Ennominae and Larentiinae. The host–plant specialist ennomine tribes Cassymini, Macariini and Palyadini completely vanish, and the proportion of the tribe Boarmiini decreases at high altitudes. In contrast, the remaining tribes (mostly comprising polyphagous species) either do not show proportional changes (Azelinini, Nacophorini, Nephodiini, Ourapterygini) or even increase (Caberini, ‘Cratoptera group’). Within Larentiinae, the species proportion of the genus Eois decreases, whereas concomitantly the proportion of Eupithecia increases. There is a remarkable similarity between the altitudinal patterns in Ecuador and those found along the latitudinal gradient in Europe. Main conclusions Species of the subfamily Larentiinae seem to be particularly well‐adapted to harsh environmental conditions, towards both high altitudes and latitudes. They might disproportionately profit from lower predation at higher altitudes. Many changes in the faunal composition can be explained by expected host–plant requirements of the species involved. Our results show that diversity estimates based on taxon ratios which are assumed to be constant must be regarded with caution because such ratios can change rapidly along environmental gradients.     

Maternal nutritional condition and genetic differentiation affect brood size and offspring body size in Nicrophorus

In most animal species, brood size and body size exhibit some variation within and between populations. This is also true for burying beetles (genus Nicrophorus), a group in which the body size of offspring depends critically on the number of offspring competing for food due to the discrete nature of resource used for larval nutrition (vertebrate carcasses). In one species, brood size and body size are correlated with population density, and appear to be phenotypically plastic. We investigated potential proximate causes of between-population variation in brood size and body size in two species, Nicrophorus vespilloides and Nicrophorus defodiens. Our first experiment supported the notion that brood size is phenotypically plastic, because it was affected by environmental variation in adult nutritional condition. We found that the pre-breeding nutritional status of female N. vespilloides affected the number of eggs they laid, the number of surviving larvae in their broods, and the body size of their offspring. We do not know whether this plasticity is adaptive because greater offspring body size confers an advantage in contests over breeding resources, or whether starved females are constrained to produce smaller clutches because they cannot fully compensate for their poor pre-breeding nutritional status by feeding from the carcass. Our second experiment documents that brood size, specifically the infanticidal brood-size adjustment behavior, has undergone genetic differentiation between two populations of N. defodiens. Even under identical breeding conditions with identical numbers of first-instar larvae, females descended from the two populations produced broods of different size with corresponding differences in offspring body size.     

Diverging diversity patterns of vascular plants and geometrid moths during forest regeneration on Mt Kilimanjaro, Tanzania

Aim This study investigates diversity patterns of vascular plants and plant‐feeding geometrid moths during montane rain forest regeneration in relation to the biogeographical and historical conditions of Mt Kilimanjaro. Location Investigations were undertaken on the south‐western slopes of Mt Kilimanjaro at altitudes between 2075 and 2265 m. Methods Thirteen plots were selected for this study. Four of these were situated in the middle of large clearings (> 1000 m²), three in secondary forest, two in mature forest remnants surrounded by secondary forest and four plots within continuous closed mature forest. Vascular plant species were recorded in an area of 20 × 20 m². Geometrid moths were attracted using lamps placed inside reflective gauze cylinders. Results Ninety‐three species of vascular plants were recorded on the plots. Plant diversity increased in the course of forest regeneration from clearings and secondary forest to mature forest remnants and mature forest. This increase was visible in all vegetation strata as well as in the species number of Dicotyledoneae. The diversity of geometrid moths conversely decreased from early to late successional stages. A total of 2276 Geometridae representing 114 morphospecies were included in the study. Local values of Fisher's α varied from 10.3 to 18.3 on clearings and in secondary forest, whereas they remained below 8.0 in mature forest and mature forest remnants. There was a significant negative correlation between the diversity of Geometridae and the number of dicots, and of plant species in the shrub layer. Main conclusions Contrary to an expected positive correlation between the diversity of vascular plants and herbivorous geometrid moths, diversity patterns of these two groups are strongly diverging due to biogeographical and ecological factors differently affecting the two groups. The increase in plant diversity can chiefly be explained with an increase in epiphyte diversity which is related to the occurrence of suitable habitats in extensive moss layers on huge Ocotea usambarensis (Engl.) trees in the mature forest. The low diversity of geometrid moths in these forests may be connected to the isolation and relatively young age of the montane rain forests on Mt Kilimanjaro. Hence only a small number of moth species adapted to the cool and perhumid conditions within moist mature forest have so far immigrated into these habitats, and time was insufficient for the evolution of many new species.     

Reproductive strategies of primates: The influence of body size and diet on litter size

The frequency of multiple births, life history parameters, body size, and diet characteristics were obtained from the literature for 70 primate species. The general pattern within the primate order is to have single infant litters, yet multiple births regularly occur in a number of species in specific phylogenetic groups. Primates which have large litters tend to be small, have short gestation periods and give birth to small infants, which are weaned quickly, and mature rapidly. Species in which multiple births are common also have short interbirth intervals and in the Callitrichidae have males which exhibit paternal care. In addition, they are commonly insectivorous. Although it is difficult to isolate the effects of diet on litter size, independent of body size, analyses suggest that after the influence of body size is statistically removed, as the proportion of insects in the diet increases, animals have larger litters. We suggest that by adopting a mixed diet of insects and fruit primates may be able to ensure access to a seasonally stable food resource that is not greatly restricted by the presence of toxins. This diet would allow a relatively high metabolism and facilitate large litters.     

Tooth,chin, bone and body size correlations

Correlations of size of teeth, chin, bone and body were investigated in 118 males and 102 females of the Burlington Growth Centre. In the males, the mesiodistal widths of the mandibular lateral incisors and canines were independently related to the thickness of the cortex of the second metacarpal and to body weight. Bone cortex thickness was significantly related to metacarpal width in males and to body weight in females. Chin depth of the males was significantly related to bone width and to body height, and negatively related to tooth width when bone width or body weight was held constant in partial correlations. Bone width and length were significantly related to body height in both sexes.     

Correlation of tooth size and body size in living hominoid primates, with a note on relative brain size in Aegyptopithecus and Proconsul.

Second molar length and body weight are used to test the correlation between tooth size and body size in living Hominoidea. These variates are highly correlated (r= 0.942, p less than 0.001), indicating that tooth size can be used in dentally unspecialized fossil hominoids as one method of predicting the average body weight of species. Based on tooth size, the average body weight of Aegyptopithecus zeuxis is estimated to have been beteen 4.5 and 7.5 kg, which is corroborated by known cranial and postcranial elements. Using Radinsky's estimates of brain size, the encephalization quotient (EQ) for Aegyptopithecus was between 0.65 and 1.04. A similar analysis for Proconsul africanus yields a body weight between 16 and 34 kg, and an EQ between 1.19 and 1.96.     

Muzzle size, paranasal swelling size and body mass in Mandrillus leucophaeus

The drill (Mandrillus leucophaeus), a forest-living Old World monkey, is highly sexually dimorphic, with males exhibiting extreme secondary sexual characteristics, including growth of paranasal swellings on the muzzle. In this study, the size of the secondary bone that forms the paranasal swellings on the muzzles of drills was assessed in relation to body mass proxies. The relationship between the overall size of the muzzle and surrogate measures of body mass was also examined. In female drills, muzzle breadth was positively correlated with two proxies of overall body mass, greatest skull length and upper M1 area. However, there was no such correlation in males. Paranasal swellings in males also appeared to have no significant relationship to body mass proxies. This suggests that secondary bone growth on the muzzles of male drills is independent of overall body size. Furthermore, this secondary bone appears to be vermiculate, probably developing rapidly and in an irregular manner, with no correlation in the sizes of paranasal swelling height and breadth. However, various paranasal swelling dimensions were related to the size of the muzzle. It is suggested that the growth of the paranasal swellings and possibly the muzzle could be influenced by androgen production and reflect testes size and sperm motility. The size and appearance of the paranasal swellings may thus be an indicator of reproductive quality both to potential mates and male competitors. Further work is required to investigate the importance of the paranasal swellings as secondary sexual characteristics in Mandrillus and the relationship between body size and secondary sexual characteristics. Attention should also be paid to the mechanisms and trajectories of facial growth in Mandrillus.     

Relationship between collagen fibril diameters and body size

Summary Suspensions of collagen fibrils obtained from derma of Elasmobranchia and Actinopterygia of different body sizes and developmental stages were examined by transmission electron microscopy. Fibril diameters were measured and classified into groups comprising a 20 nm diameter interval. Diagrams showing fibril populations of each fish were made. The measurements were averaged and their confidence intervals and standard errors determined. For each species other diagrams were plotted in which the mean diameters were correlated to the body length of each sample. The results show that: 1) a correlation exists between an increase in diameter of collagen fibrils and somatic growth until sexual maturity is reached; 2) fibril populations are subsequently spread over a wider range due to the presence in the derma of classes of newly formed and therefore thinner fibrils. The deposition of new fibrils is possibly influenced by individual factors; 3) no relationship exists between mean fibril diameter and body size; 4) no relationship exists between phylogenetic position and pattern of diameter distribution.Research supported by a grant from C.N.R. Roma (69.02087.0115.1150)     

Joint evolution of predator body size and prey-size preference

We studied the joint evolution of predator body size and prey-size preference based on dynamic energy budget theory. The predators’ demography and their functional response are based on general eco-physiological principles involving the size of both predator and prey. While our model can account for qualitatively different predator types by adjusting parameter values, we mainly focused on ‘true’ predators that kill their prey. The resulting model explains various empirical observations, such as the triangular distribution of predator–prey size combinations, the island rule, and the difference in predator–prey size ratios between filter feeders and raptorial feeders. The model also reveals key factors for the evolution of predator–prey size ratios. Capture mechanisms turned out to have a large effect on this ratio, while prey-size availability and competition for resources only help explain variation in predator size, not variation in predator–prey size ratio. Predation among predators is identified as an important factor for deviations from the optimal predator–prey size ratio.     

Relationships between geographical range size, body size, local abundance, and habitat breadth in North American suckers and sunfishes

Aim I examine the relationship between geographical range size and three variables (body size, an index of habitat breadth, and an index of local abundance) within a phylogenetic framework in North American species of suckers and sunfishes. Location North America Methods Regressions after independent contrasts of geographical range size, body size, habitat breadth, and local abundance. Results Species with large range sizes tend to be larger-bodied, be more locally abundant, and have higher habitat breadths. Character reconstructions support the prediction that variables associated with rarity (small geographical range size, low local abundance, low niche breadth, and large body size) evolve in unison, although large body size was associated with the opposite traits in these taxa. Gaston & Blackburn (1996a) suggested using visual identification of the lower boundary of the geographical range-body size relationship to identify extinction-prone species; this resulted in thirteen species that are potentially extinction-prone. Main conclusions Similar evolutionary mechanisms appear to operate on body size and other variables related to rarity, even in distantly related taxa.     

Season length,body size,and social polymorphism: size clines but not saw tooth clines in sweat bees

1. Annual insects are predicted to grow larger where the growing season is longer. However, transitions from one to two generations per year can occur when the season becomes sufficiently long, and are predicted to result in a sharp decrease in body size because available development time is halved. The potential for resulting saw‐tooth clines has been investigated only in solitary taxa with free‐living larvae. 2. Size clines were investigated in two socially polymorphic sweat bees (Halictidae): transitions between solitary and social nesting occur along gradients of increasing season length, characterised by the absence or presence of workers and offspring that are individually mass provisioned by adults. How the body size changes with season length was examined, and whether transitions in social phenotype generate saw‐tooth size clines. We measured Lasioglossum calceatum and Halictus rubicundus nest foundresses originating from more than 1000 km of latitude, encompassing the transition between social and solitary nesting. 3. Using satellite‐collected temperature data to estimate season length, it was shown that both species were largest where the season was longest. Body size increased linearly with season length in L. calceatum and non‐linearly in H. rubicundus but the existence of saw‐tooth clines was not supported. 4. The present results suggest that because the amount of food consumed by offspring during development is determined by adults, environmental and social influences on the provisioning strategies of adult bees may be more important factors than available feeding time in determining offspring body size in socially polymorphic sweat bees.     

Different cell size and cell number contribution in two newly established and one ancient body size cline of Drosophila subobscura

Latitudinal genetic clines in body size occur in many ectotherms including Drosophila species. In the wing of D. melanogaster, these clines are generally based on latitudinal variation in cell number. In contrast, differences in wing area that evolve by thermal selection in the laboratory are in general based on cell size. To investigate possible reasons for the different cellular bases of these two types of evolutionary response, we compared the newly established North and South American wing size clines of Drosophila subobscura. The new clines are based on latitudinal variation in cell area in North America and cell number in South America. The ancestral European cline is also based on latitudinal variation in cell number. The difference in the cellular basis of wing size variation in the American clines, which are roughly the same age, together with the similar cellular basis of the new South American cline and the ancient European one, suggest that the antiquity of a cline does not explain its cellular basis. Furthermore, the results indicate that wing size as a whole, rather than its cellular basis, is under selection. The different cellular bases of different size clines are most likely explained either entirely by chance or by different patterns of genetic variance--or its expression--in founding populations.