Poly(glycoamidoamine)s for gene delivery. structural effects on cellular internalization, buffering capacity, and gene expression

The study of polymeric nucleic acid delivery vehicles has recently grown because of their promise for many biomedical applications. In an effort to understand how the chemical traits of polymers affect the biological mechanisms of nucleic acid delivery, we have calculated the buffering capacity in the physiological pH range of a series of 10 poly(glycoamidoamine)s with systematic structural variations in the amine stoichiometry (from 1 to 4), carbohydrate moiety (d-glucarate or l-tartarate), and amine spacer (ethylene or butylene) within their repeat units. In addition, we have compared the buffering capacity of these polymeric vectors to their polyplex (polymer-DNA complex) stability, cellular internalization, and gene expression profiles to understand the parameters that are important for increasing gene delivery efficiency. The results indicate that the buffering capacity is not always the primary characteristic that determines the gene delivery efficiency for all the poly(glycoamidoamine)s. We have found that the buffering capacity may affect the gene delivery efficiency only when analogous structures containing the same number of amines but different carbohydrates are compared. We reveal that the cellular internalization is the key step in the gene delivery process with systems containing different amine stoichiometry. Also, increasing the number of methylene groups between the secondary amines increases toxicity to a large degree. This systematic and heuristic approach of studying the correlations between structural variables and gene delivery efficiency will facilitate the development of effective synthetic vectors for specific nucleic acid delivery applications.     

Poly-l-glutamic acid derivatives as multifunctional vectors for gene delivery. Part A. Synthesis and physicochemical evaluation

This paper describes the synthesis and evaluation of a series of multifunctional poly-l-glutamic acid derivatives that can be used as vectors for gene delivery. They readily form polyelectrolyte complexes with DNA, resulting in a reduced surface charge and size of the DNA. The formation of a polymer-DNA complex and the stability toward serum albumin was analyzed by ethidium bromide fluorescence measurements and agarose gel retardation studies. Most polymers, except those with more than 80% imidazoles, are able to condense calf thymus DNA, thus forming complexes with sizes varying between 105 and 172 nm. The surface charge of the complexes was determined at different charge ratios by zeta potential measurements. The buffering properties of the polymers were determined via titration studies. The results show that the polymers are able to buffer the endosomal environment, although to a smaller extent than polyethyleneimine. The first part of this study is devoted to the synthesis and the physicochemical evaluation of the multifunctional polymers and their use as carriers for genetic information. The second part, to be published subsequently, discusses the biological evaluation of the polymers and their complexes with DNA.     

Biophysical characterization of quaternary pyridinium functionalized polynorbornenes for DNA complexation and their cellular interactions

Cationic polymers with hydrophobic side chains have gained great interest as DNA carriers since they form a compact complex with negatively charged DNA phosphate groups and interact with the cell membrane. Amphiphilic polyoxanorbornenes with different quaternary alkyl pyridinium side chains with ethyl‐p(OPy2) and hexyl units‐p(OPy6) bearing 10 kDa MWT were synthesized by living Ring‐Opening Metathesis Polymerization method. The physicochemical characteristics: critical micellar concentration, size distribution, surface charge, and condensation of polymer/DNA complex were investigated. Morphology of complexes was monitored by Atomic force microscopy. Cytotoxicity and interaction of these complexes with model lipid vesicles mimicking the cell membrane were examined. These polymers were enabled to form small sized complexes of DNA, which interact with model membrane vesicles. It was found that the nature of hydrophobicity of the homopolymers significantly impacts rates of DNA complexation and the surface charge of the resulting complexes. These results highlight the prospect of the further examinations of these polymers as gene carriers.     

Effects of the incorporation of a hydrophobic middle block into a PEG-polycation diblock copolymer on the physicochemical and cell interaction properties of the polymer-DNA complexes

One-component homopolymers of cationic monomers (polycations) and diblock copolymers comprising poly(ethylene glycol) (PEG) and a polycation block have been the most widely used types of polymers for the formulation of polymer-based gene delivery systems. In this study, we incorporate a hydrophobic middle block into the conventional PEG-polycation architecture and investigate the effects of this hydrophobic modification on the physicochemical and cell-level biological properties of the polymer-DNA complexes that are relevant to gene delivery applications. The ABC-type triblock copolymer used in this study consists of (A) PEG, (B) hydrophobic poly( n-butyl acrylate) (PnBA), and (C) cationic poly(2-(dimethylamino)ethyl methacrylate) (PDMAEMA) component polymers. The properties of the triblock copolymer/DNA complexes are compared with those of two other more conventional DNA carriers derived, respectively, using a PDMAEMA homopolymer and a PEG-PDMAEMA diblock copolymer that had comparable molecular weights for individual blocks. In aqueous solution, the PEG-PnBA-PDMAEMA polymer forms positively charged spherical micelles. The electrostatic complexation of these micelles with plasmid DNA molecules results in the formation of stable small-sized DNA particles that are coated with a micelle monolayer, as confirmed by agarose gel electrophoresis, dynamic light scattering (DLS), and cryogenic transmission electron microscopy (cryo-TEM). Proton nuclear magnetic resonance ( (1)H NMR) spectroscopy measurements indicate that the whole micelle-DNA assembly (named "micelleplex" for convenience) is shielded predominantly by the PEG chains. DLS and optical microscopy imaging measurements indicate that compared with PDMAEMA-DNA polyplexes, the micelleplexes have a significantly lower tendency to aggregate under physiological salt concentrations and show reduced interactions with negatively charged components in serum such as albumin and erythrocytes. While the micelleplexes are comparable to the PEG-PDMAEMA-based DNA polyplexes in terms of their stability against aggregation under high salt concentrations and in the presence of the albumin protein, they have a slightly higher tendency to interact with erythrocytes than the diblock copolymer polyplexes. Agarose gel electrophoresis measurements indicate that relative to the PEG-PDMAEMA polyplexes, the micelleplexes provide better protection of the encapsulated DNA from enzymatic degradation and also exhibit greater stability against disintegration induced by polyanionic additives; in these respects, the PDMAEMA homopolymer-based polyplexes show the best performance. In vitro studies in HeLa cells indicate that the PDMAEMA polyplexes show the highest gene transfection efficiency among the three different gene delivery systems. Between the micelleplexes and the PEG-PDMAEMA polyplexes, a higher gene transfection efficiency is observed with the latter system. All three formulations show comparable levels of cytotoxicity in HeLa cells.     

Enhanced gene expression through temperature profile-induced variations in molecular architecture of thermoresponsive polymer vectors

BACKGROUND: Successful non-viral gene targeting requires vectors to meet two conflicting needs-strong binding to protect the genetic material during transit and weak binding at the target site to enable release. Responsive polymers could fulfil such requirements through the switching of states, e.g. the chain-extended coil to chain-collapsed globule phase transition that occurs at a lower critical solution temperature (LCST), in order to transport nucleic acid in one polymer state and release it in another. METHODS: The ability of new synthetic polycations based on poly(ethyleneimine) (PEI) with grafted neutral responsive poly(N-isopropylacrylamide) (PNIPAm) chains to condense DNA into particles with architectures varying according to graft polymer LCST was assessed using a combination of fluorescence spectroscopy, dynamic light scattering (DLS), zeta sizing, gel retardation and atomic force microscopy studies. Transfection assays were conducted under experimental conditions wherein the polymer components were able to cycle across their LCST. RESULTS: Two PEI-PNIPAm conjugate polymers with different LCSTs displayed coil-globule transitions when complexed to plasmid DNA, leading to variations in molecular architecture as shown by changes in emission maxima of an environment-sensitive fluorophore attached to the PNIPAm chains. Gel retardation assays demonstrated differences in electrophoretic mobilities of polymer-DNA complexes with temperatures below and above polymer LCSTs. Atomic force micrographs showed changes in the structures of polymer-DNA complexes for a polymer undergoing a phase transition around body temperature but not for the polymer with LCST outside this range. Transfection experiments in C2C12 and COS-7 cells demonstrated that the highest expression of transgene occurred in an assay that involved a 'cold-shock' below polymer LCST during transfection. CONCLUSIONS: Designed changes in thermoresponsive polycation vector configuration via temperature-induced phase transitions enhanced transgene expression. The results indicate that changes in molecular architecture induced by a carefully chosen stimulus during intracellular trafficking can be used to enhance gene delivery.     

Preparation and properties of modified chitosan as potential matrix materials for drug sustained-release beads

Modified chitosan such as chitosan alpha-ketoglutaric acid (KCTS) and hydroxamated chitosan alpha-ketoglutaric acid (HKCTS) were successfully prepared. The modified chitosan were employed in the formation of drug-loaded, iron(III)-crosslinked polymeric beads. The produced polymers were characterized by IR, NMR, WXRD and DSC measurements. The resulting beads were evaluated in vitro as drug prolonging and potentially orally administered delivery system. Theophylline was used as the loaded model drug. The generated beads proved to be successful in prolonging drug release. The release kinetics was evaluated by fitting the experimental data to standard release equations (zero-, first- and Higuchi equation). The best fit was found with Higuchi model for the polymeric beads.     

Self-assembly of recombinant amphiphilic oligopeptides into vesicles

The aim of the present study was to design amphiphilic oligopeptides that can self-assemble into vesicular structures. The ratio of hydrophilic to hydrophobic block length was varied, and peptides were designed to have a hydrophobic tail in which the bulkiness of the amino acid side groups increases toward the hydrophilic domain (Ac-Ala-Ala-Val-Val-Leu-Leu-Leu-Trp-Glu(2/7)-COOH). These peptides were recombinantly produced in bacteria as an alternative to solid-phase synthesis. We demonstrate with different complementary techniques (dynamic and static light scattering, tryptophan fluorescence anisotropy, and electron microscopy) that these amphiphilic peptides spontaneously form vesicles with a radius of approximately 60 nm and a low polydispersity when dispersed in aqueous solution at neutral pH. Morphology and size of the vesicles were relatively insensitive to the variations in hydrophilic block length. Exposure to acidic pH resulted in formation of visible aggregates, which could be fully reversed to vesicles upon pH neutralization. In addition, it was demonstrated that water-soluble molecules can be entrapped inside these peptide vesicles. Such peptide vesicles may find applications as biodegradable drug delivery systems with a pH-dependent release profile.     

Structural characterization and buffering capacity in relation to the transfection efficiency of biodegradable polyurethane

Inefficient release of polymer/DNA complexes from endocytic vesicles into the cytoplasm and the cytotoxic nature of cationic polymers are two of the primary causes of poor gene delivery. EG-polyurethane [poly(ethylene glycol)-PU, Poly 1], EGDM-polyurethane [poly(ethylene glycol), 2-(dimethylamino)ethylamine-PU, Poly 2], and MDEADM-polyurethane [N-methyldiethanolamine, 2-(dimethylamino)ethylamine-PU, Poly 3] were designed in this study to overcome these obstacles. The structural characteristics of polyurethanes and physicochemical properties of their formed complexes with DNA were determined to correlate their transfection efficiency. The results revealed that Poly 2 and Poly 3 could bind with plasmid DNA and yield positively charged complexes with a size required for transfection. Poly 3 showed the best in buffering capacity and its formed complexes with DNA could transfect COS-7 cells better than those of Poly 2 and Poly 1. This study reveals that the amine groups in the polymeric structure and the buffer capacity of a polymeric transfectant would affect its potential in DNA delivery. Also the size and binding properties of DNA and polymeric transfectants can be in correlation to the transfection efficiency of resulting DNA/polymer complexes.     

Gene delivery properties of end-modified poly(beta-amino ester)s

Here, we present the synthesis of a library of end-modified poly(beta-amino ester)s and assess their utility as gene delivery vehicles. Polymers were synthesized using a rapid, two-step approach that involves initial preparation of an acrylate-terminated polymer followed by a postpolymerization amine-capping step to generate end-functionalized polymers. Using a highly efficient poly(beta-amino ester), C32, we show that the terminal amine can greatly affect and improve polymer properties relevant to gene delivery. Specifically, the in vitro transfection levels can be increased by 30% and the optimal polymer:DNA ratio lowered 5-fold by conjugation of the appropriate end group. The most effective modifications were made by grafting primary diamine molecules to the chain termini. The added charge and hydrophobicity of some derivatives enhanced DNA binding and resulted in the formation of polymer-DNA complexes less than 100 nm in diameter. In addition, cellular uptake was improved 5-fold over unmodified C32. The end-modified poly(beta-amino ester)s presented here are some of the most effective gene-delivery polycations, superior to polyethylenimine and previously reported poly(beta-amino ester)s. These results show that the end-modification of poly(beta-amino ester)s is a general strategy to alter functionality and improve the delivery performance of these materials.     

Glucose-responsive vehicles containing phenylborate ester for controlled insulin release at neutral pH

This study is devoted to developing amphiphilic block polymers based on phenylborate ester, which can self-assemble to form nanoparticles, as a glucose-sensitive drug carrier. Poly(ethylene glycol)-block-poly[(2-phenylboronic esters-1,3-dioxane-5-ethyl) methylacrylate] (MPEG5000-block-PBDEMA) was fabricated with MPEG5000-Br as a macroinitiator via atom transfer radical polymerization (ATRP). Using the solvent evaporation method, these block polymers can disperse in aqueous milieu to self-assemble into micellar aggregates with a spherical core-shell structure. Zeta potential and fluorescence techniques analysis showed a good purification effect, high encapsulation efficiency, and loading capacity of fluorescein isothiocyanate (FITC)-insulin-loaded polymeric micelles under optimal conditions. The in vitro insulin release profiles revealed definite glucose-responsive behavior of the polymeric micelles at pH 7.4 and 37 °C, depending on the environmental glucose concentration and the chemical composition of the block polymers. Further, circular dichroism spectroscopy demonstrated that the overall tertiary structure of the released insulin was in great agreement with standard insulin. (1)H NMR results of the polymeric micelles during glucose-responsive process supposed one possible insulin release mechanism via the polymer polarity transition from amphiphilic to double hydrophilic. The analysis of L929 mouse fibroblast cells viability suggested that the polymeric micelles from MPEG5000-block-PPBDEMA had low cell toxicity. The block polymers containing phenylborate ester that responded to changes in the glucose concentration at neutral pH are being aimed for use in self-regulated insulin delivery.     

Design of imidazole-containing endosomolytic biopolymers for gene delivery

The development of safe and effective gene delivery agents poses a great challenge in the quest to make human gene therapy a reality. Cationic polymers represent one important class of materials for gene delivery, but to date they have shown only moderate efficiency. Improving the efficiency will require the design of new polymers incorporating optimized gene delivery properties. For example, inefficient release of the DNA/polymer complex from endocytic vesicles into the cytoplasm is one of the primary causes of poor gene delivery. Here we report the synthesis of a biocompatible, imidazole-containing polymer designed to overcome this obstacle. DNA/polymer polyplexes incorporating this polymer were shown to have desirable physico-chemical properties for gene delivery and are essentially nontoxic. Using this system, mammalian cells in vitro were transfected in the absence of any exogenous endosomolytic agent such as chloroquine.     

Quantitative Structure-Property Relationship (QSPR) Modeling of Drug-Loaded Polymeric Micelles via Genetic Function Approximation

Self-assembled nano-micelles of amphiphilic polymers represent a novel anticancer drug delivery system. However, their full clinical utilization remains challenging because the quantitative structure-property relationship (QSPR) between the polymer structure and the efficacy of micelles as a drug carrier is poorly understood. Here, we developed a series of QSPR models to account for the drug loading capacity of polymeric micelles using the genetic function approximation (GFA) algorithm. These models were further evaluated by internal and external validation and a Y-randomization test in terms of stability and generalization, yielding an optimization model that is applicable to an expanded materials regime. As confirmed by experimental data, the relationship between microstructure and drug loading capacity can be well-simulated, suggesting that our models are readily applicable to the quantitative evaluation of the drug-loading capacity of polymeric micelles. Our work may offer a pathway to the design of formulation experiments.     

Poly(glycoamidoamine)s for gene delivery: stability of polyplexes and efficacy with cardiomyoblast cells

Polymeric vectors have potential as nucleic acid delivery vehicles for novel gene therapy and oligonucleotide treatments for cardiovascular disease. In this report, poly(glycoamidoamine)s that contain four secondary amines and either two or four hydroxyl units in the repeat unit with D-glucarate (D4), meso-galactarate (G4), D-mannarate (M4), and l-tartarate (T4) stereochemistry have been investigated for their pDNA-binding affinity, DNase protection effect, and polyplex stability in the presence of salt and serum. Also, the luciferase gene delivery and cellular internalization of polyplexes formed with these polymers have been investigated with rat cardiomyoblast [H9c2(2-1)] cells. The results demonstrate that the number of hydroxyl groups and the stereochemistry affect the biological properties. Polymers T4 and G4 have higher pDNA binding affinity, protect pDNA from nuclease degradation, and do not release pDNA in the presence of serum. Polymers D4 and M4 bind pDNA with lower affinity, which allows for some pDNA degradation and release in the presence of serum. Although T4 forms the most stable polyplexes, vector G4 reveals the highest luciferase gene expression in serum-free media and the greatest cellular internalization of fluorescein-labeled pDNA both in serum-free and serum-supplemented media. The results of these studies indicate that the polymer-DNA binding affinity, nuclease protection capability, and polyplex stability are important parameters to facilitate effective pDNA delivery with poly(glycoamidoamine)s in cultured cardiomyoblast cells. The carbohydrate type also plays an important role to increase cellular uptake and gene expression where the polymer with the galactarate stereochemistry (in G4) is found to be the most effective vector for pDNA delivery to cardiomyoblast cells in vitro.     

Overcoming limiting side reactions associated with an NHS-activated precursor of polymethacrylamide-based polymers

Combinatorial polymer libraries have recently gained popularity for the development of novel materials for a variety of biomedical applications including non-viral gene delivery systems and biodegradable polymers for tissue engineering. To streamline the nontrivial task of library synthesis, activated ester homopolymers have been used to serve as a backbone to which primary amine-containing functional groups (NH2-FGs) can be covalently bound at varying ratios. Polymethacryloxysuccinimide (poly(MAOS)) is one such homopolymer that was previously reported to be an attractive precursor for polymeric drug and gene delivery systems. The reported functionalization protocols entailed conjugating the precursor with 2 equiv of the NH2-FG at a reaction concentration of 25 mg poly(MAOS)/150 microL DMSO for either 5 h at 50 degrees C or 16 h at 25 degrees C. More recently, both protocols were revealed to be associated with ring-opening and glutarimide-forming side reactions that compromise the utility of the homopolymer. Using 1-dimensional and 2-dimensional NMR spectroscopy techniques, we have characterized the side product distributions that result from conjugations performed at 50 degrees C/5 h and 25 degrees C/16 h. Moreover, by systematically altering the equivalents of the NH2-FGs, polymer concentration, reaction time, and reaction temperature, we have established a protocol that overcomes these side reactions. Using a final reaction protocol of 5 equiv of the NH2-FG at a reaction concentration of 25 mg poly(MAOS)/600 microL DMSO for 24 h at 75 degrees C, we have obtained functionalized polymers with minimal side products. This protocol is applicable for polymers ranging from 5000 to 50,000 g/mol, compatible with a variety of functional groups, and amenable to conjugating combinations of functional groups.     

Multifunctional synthetic poly(L-glutamic acid)-based cancer therapeutic and imaging agents

Modern polymer chemistry has led to the generation of a number of biocompatible synthetic polymers that have been increasingly studied as efficient carriers for drugs and imaging agents. Synthetic biocompatible polymers have been used to improve the efficacy of both small-molecular-weight therapeutics and imaging agents. Furthermore, multiple targeted anticancer agents and/or imaging reporters can be attached to a single polymer chain, allowing multifunctional and/or multimodality therapy and molecular imaging. Having both an anticancer drug and an imaging reporter in a single polymer chain allows noninvasive real-time visualization of the pharmacokinetics of polymeric drug delivery systems, which can uncover and explain the complicated mechanisms of in vivo drug delivery and their correlation to pharmacodynamics. This review examines the use of the synthetic biocompatible polymer poly(L-glutamic acid) (PG) as an efficient carrier of cancer therapeutics and imaging agents. This review summarizes and updates our recent research on the use of PG as a platform for drug delivery and molecular imaging, including recent clinical findings with respect to PG-paclitaxel (PG-TXL), the combination of PG-TXL with radiotherapy, mechanisms of action of PG-TXL, and noninvasive visualization of in vivo delivery of polymeric conjugates with contrast-enhanced magnetic resonance imaging, optical imaging, and multimodality imaging.     

Effect of thiol pendant conjugates on plasmid DNA binding, release, and stability of polymeric delivery vectors

Polymers have attracted much attention as potential gene delivery vectors due to their chemical and structural versatility. However, several challenges associated with polymeric carriers, including low transfection efficiencies, insufficient cargo release, and high cytotoxicity levels have prevented clinical implementation. Strong electrostatic interactions between polymeric carriers and DNA cargo can prohibit complete cargo release within the cell. As a result, cargo DNA never reaches the cell's nucleus where gene expression takes place. In addition, highly charged cationic polymers have been correlated with high cytotoxicity levels, making them unsuitable carriers in vivo. Using poly(allylamine) (PAA) as a model, we investigated how pH-sensitive disulfide cross-linked polymer networks can improve the delivery potential of cationic polymer carriers. To accomplish this, we conjugated thiol-terminated pendant chains onto the primary amines of PAA using 2-iminothiolane, developing three new polymer vectors with 5, 13, or 20% thiol modification. Unmodified PAA and thiol-conjugated polymers were tested for their ability to bind and release plasmid DNA, their capacity to protect genetic cargo from enzymatic degradation, and their potential for endolysosomal escape. Our results demonstrate that polymer-plasmid complexes (polyplexes) formed by the 13% thiolated polymer demonstrate the greatest delivery potential. At high N/P ratios, all thiolated polymers (but not unmodified counterparts) were able to resist decomplexation in the presence of heparin, a negatively charged polysaccharide used to mimic in vivo polyplex-protein interactions. Further, all thiolated polymers exhibited higher buffering capacities than unmodified PAA and, therefore, have a greater potential for endolysosomal escape. However, 5 and 20% thiolated polymers exhibited poor DNA binding-release kinetics, making them unsuitable carriers for gene delivery. The 13% thiolated polymers, on the other hand, displayed high DNA binding efficiency and pH-sensitive release.     

Synthesis and cytotoxic activity of platinum complex immobilized by branched polyethylene glycol

Two-arm branched mPEG (monomethoxy-polyethylene glycol) with different molecular weights (M(n)=4000, 6000, 9400) was synthesized and used as carrier for immobilization of cisplatin [cis-diammine(dichloro)platinum (II), CDDP]. As a contrast, CDDP modified with linear mPEGs was also synthesized. All these polymeric drugs modified with branched mPEG are water soluble and show higher cytotoxic activity against C6 human breast cancer cells than cisplatin modified with linear mPEG with the same molecular weight. All the polymeric CDDP showed a much lower toxicity than the CDDP.     

Selective N-alkylation of β-alanine facilitates the synthesis of a poly(amino acid)-based theranostic nanoagent

The development of functional amino acid-based polymeric materials is emerging as a platform to create biodegradable and nontoxic nanomaterials for medical and biotechnology applications. In particular, facile synthetic routes for these polymers and their corresponding polymeric nanomaterials would have a positive impact in the development of novel biomaterials and nanoparticles. However, progress has been hampered by the need to use complex protection-deprotection methods and toxic phase transfer catalysts. In this study, we report a facile, single-step approach for the synthesis of an N-alkylated amino acid as an AB-type functional monomer to generate a novel pseudo-poly(amino acid), without using the laborious multistep, protection-deprotection methods. This synthetic strategy is reproducible, easy to scale up, and does not produce toxic byproducts. In addition, the synthesized amino acid-based polymer is different from conventional linear polymers as the butyl pendants enhance its solubility in common organic solvents and facilitate the creation of hydrophobic nanocavities for the effective encapsulation of hydrophobic cargos upon nanoparticle formation. Within the nanoparticles, we have encapsulated a hydrophobic DiI dye and a therapeutic drug, Taxol. In addition, we have conjugated folic acid as a folate receptor-targeting ligand for the targeted delivery of the nanoparticles to cancer cells expressing the folate receptor. Cell cytotoxicity studies confirm the low toxicity of the polymeric nanoparticles, and drug-release experiments with the Taxol-encapsulated nanoparticles only exhibit cytotoxicity upon internalization into cancer cells expressing the folate receptor. Taken together, these results suggested that our synthetic strategy can be useful for the one-step synthesis of amino acid-based small molecules, biopolymers, and theranostic polymeric nanoagents for the targeted detection and treatment of cancer.     

Controlled delivery of plasmid DNA and siRNA to intracellular targets using ketalized polyethylenimine

A new polyethylenimine (PEI)-derived biodegradable polymer was synthesized as a nonviral gene carrier. Branches of PEI were ketalized, and capabilities of nucleic acid condensation and delivery efficiency of the modified polymers were compared with ones of unketalized PEI. Ketalized PEI was able to efficiently compact both plasmid DNA and siRNA into nucleic acids/ketalized PEI polyplexes with a range of 80-200 nm in diameter. Nucleic acids were efficiently dissociated from the polyplexes made of ketalized PEI upon hydrolysis. In vitro study also demonstrated that ketalization enhanced transfection efficiency of the polyplexes while reducing cytotoxicity, even at high N/ P ratios. Interestingly, transfection efficiency was found to be inversely proportional to molecular weights of ketalized PEI, while RNA interference was observed in the opposite way. This study implies that selective delivery of plasmid DNA and siRNA to the nucleus and the cytoplasm can be achieved by tailoring the structures of polymeric gene carriers.