Rabbit antibody detection with RNA aptamers

Antibody-based detection systems are widely used, but in the cases of immunoprecipitations and enzyme-linked immunoassays, they can be laborious. These techniques require the preparation of at least two kinds of non-cross-reactive immunoglobulin Gs (IgGs), usually made from different species against the single target molecule. Aptamers composed of nucleic acids possess strict recognition ability for the target molecule's three-dimensional structure and, thus, are considered to act like IgG. In this study, experimental trials were designed to combine the advantages of IgG and aptamers. For this purpose, aptamers against rabbit IgG were identified by in vitro selection. One of the obtained aptamers had a dissociation constant lower than 15 pM to the rabbit IgG. It bound specifically to the constant region of the rabbit IgG, and no binding was observed with mouse or goat IgG. Moreover, this aptamer recognized only the native form of rabbit IgG and could not bind the sodium dodecyl sulfate (SDS)-denatured form. These features show the advantage of using the aptamer as a secondary probing agent rather than the usual secondary antibodies.     

Facile conversion of ATP-binding RNA aptamer to quencher-free molecular aptamer beacon

We have developed RNA-based quencher-free molecular aptamer beacons (RNA-based QF-MABs) for the detection of ATP, taking advantage of the conformational changes associated with ATP binding to the ATP-binding RNA aptamer. The RNA aptamer, with its well-defined structure, was readily converted to the fluorescence sensors by incorporating a fluorophore into the loop region of the hairpin structure. These RNA-based QF-MABs exhibited fluorescence signals in the presence of ATP relative to their low background signals in the absence of ATP. The fluorescence emission intensity increased upon formation of a RNA-based QF-MAB·ATP complex.     

A universal fluorescent aptasensor based on AccuBlue dye for the detection of pathogenic bacteria

We report a universal fluorescent aptasensor based on the AccuBlue dye, which is impermeant to cell membranes, for the detection of pathogenic bacteria. The sensor consists of AccuBlue, an aptamer strand, and its complementary strand (cDNA) that partially hybridizes to the aptamer strand. We have fabricated two models by changing the sequence of the reaction between the elements in the system. One is the “signal on” model in which the aptamer is first bound to the target, followed by the addition of cDNA and AccuBlue, at which time the cDNA hybridizes with the free unreacted aptamer and forms a double-stranded DNA (dsDNA) duplex. Such hybridization causes AccuBlue to insert into the dsDNA and exhibit significantly increased fluorescence intensity because of the specific intercalation of the AccuBlue into dsDNA rather than single-stranded DNA (ssDNA). The other model, “signal off,” involves hybridization of the aptamer with cDNA first, resulting in high fluorescence intensity on the addition of AccuBlue. When the target is added, the aptamer binds the target, causing the cDNA to detach from the dsDNA duplex and resulting in low fluorescence as a result of the liberation of AccuBlue. Because this design is based purely on DNA hybridization, and AccuBlue is impermeant to cell membranes, it could potentially be adapted to a wide variety of analytes.     

Direct selection of RNA beacon aptamers

A method for the direct selection of RNA molecules that can be easily converted into beacon aptamers is presented. Beacon aptamers are fluorescently labeled nucleic acids that signal the presence of a specific ligand through changes in fluorescence intensity. Typically, ligand binding causes an increase in fluorescence intensity by inducing a conformational change that separates a fluorophore/quencher pair. The method presented here simultaneously selects for ligand binding and induction of an appropriate conformational change. The method was tested by selecting RNA molecules that can detect the aminoglycoside antibiotic tobramycin. After 14 rounds of selection, two sequence families emerged. Upon conversion into beacon aptamers, representatives of the two selected sequence families specifically detected tobramycin, while a negative control RNA that did not survive the selection protocol did not function as a tobramycin beacon aptamer.     

Aptamer biosensor for protein detection using gold nanoparticles

Combining gold nanoparticles (GNPs) as fluorescence quencher and aptamer as probe, we have developed protein biosensors by using DNA-modified GNPs. We examined how the experimental design, such as the type of interaction between DNA strands and GNPs, temperature, and microenvironment of aptamer, influences the recognition ability of the biosensor. Under our experimental conditions, the recognition of protein by the complex of dye-labeled DNA hybridized with aptamer that is immobilized on GNPs (Ap-Im-GNPs) shows the best character in protein detection.     

Real-time PCR detection of protein analytes with conformation-switching aptamers

We have developed a novel method that uses conformation-switching aptamers for real-time PCR analysis of protein analytes. The aptamers have been designed so that they assume one secondary structure in the absence of a protein analyte and a different secondary structure in the presence of a protein such as thrombin or platelet-derived growth factor (PDGF). The protein-bound structure in turn assembles a ligation junction for the addition of a real-time PCR primer. Protein concentrations could be specifically detected into the picomolar range, even in the presence of cell lysates. The method has advantages relative to both immunoPCR (because no signal is produced by background binding) and the proximity ligation assay (PLA) (because only one epitope, rather than two epitopes, on a protein surface must be bound).     

Improvements and simplifications in in-gel fluorescent detection of proteins using ruthenium II tris-(bathophenanthroline disulfonate): the poor man's fluorescent detection method

Fluorescent detection of proteins is a popular method of detection allying sensitivity, linearity and compatibility with mass spectrometry. Among the numerous methods described in the literature, staining with ruthenium II tris(bathophenanthroline disulfonate) is particularly cost-effective, but slightly cumbersome owing to difficulties in the preparation of the complex and complexity of staining protocols. We describe here the modifications on both aspects that allow to perform a higher contrast staining and offer a more robust method of complex preparation, thereby maximizing the advantages of the method.     

Rational design of a thrombin electrochemical aptasensor by conjugating two DNA aptamers with G-quadruplex halves

A novel strategy for the fabrication of an electrochemical aptasensor is proposed; this strategy has been employed in this work to assay thrombin concentration. Two well-designed oligonucleotides were used as the core element. G-quadruplex–hemin complexes can be formed on the surface of the electrode to give a detectable signal only when thrombin is not bound to the aptamers. The detection limit of the biosensor has been lowered to 10 nM. Moreover, since the electroactive probe is not required to be bound to the oligonucleotide, this strategy may integrate the advantages of being both label-free and cost-effective.     

Ultrafast coelectrophoretic fluorescent staining of proteins with carbocyanines

Protein detection on SDS gels or on 2-D gels must combine several features, such as sensitivity, homogeneity from one protein to another, speed, low cost, and user-friendliness. For some applications, it is also interesting to have a nonfixing stain, so that proteins can be mobilized from the gel for further use (electroelution, blotting). We show here that coelectrophoretic staining by fluorophores of the oxacarbocyanine family, and especially diheptyloxacarbocyanine, offers several positive features. The sensitivity is intermediate between the one of colloidal CBB and the one of fluorescent ruthenium complexes. Detection is achieved within 1 h after the end of the electrophoretic process and does not use any fixing or toxic agent. The fluorescent SDS-carbocyanine-protein complexes can be detected either with a laser scanner with an excitation wavelength of 488 nm or with a UV table operating at 302 nm. Excellent sequence coverage in subsequent MS analysis of proteolytic peptides is also achieved with this detection method.     

Different approaches for the detection of thrombin by an electrochemical aptamer-based assay coupled to magnetic beads

Different assay formats based on the coupling of magnetic beads with electrochemical transduction were compared here for the detection of thrombin by using a thrombin specific aptamer. By using the thrombin-binding aptamer, a direct and an indirect competitive assay for thrombin have been developed by immobilising the aptamer or the protein, respectively. Moreover, another strategy was based on the direct measurement of the enzymatic product of thrombin captured by the immobilised aptamer. All the assays were developed by coupling the electrochemical transduction with the innovative and advantageous use of magnetic beads.

The assays based on the immobilisation of the protein were not successful since no binding was recorded between thrombin and its aptamer. With the direct competitive assay, when the aptamer was immobilised onto the magnetic beads, a detection limit of 430 nM for thrombin was achieved. A lower detection limit for the protein (175 nM) was instead obtained by detecting the product of the enzymatic reaction catalysed by thrombin. All these assays were finally compared with a sandwich assay which reached a detection limit of 0.45 nM of thrombin demonstrating the best analytical performances.

With this comparison the importance of a deep study on the different analytical approaches for thrombin detection to reach the performances of the best assay configuration has been demonstrated.     

Crystal violet–G-quadruplex complexes as fluorescent sensors for homogeneous detection of potassium ion

A novel K⁺ detection method was reported using a label-free G-quadruplex-forming oligonucleotide and a triphenylmethane fluorescent dye crystal violet (CV). This method is based on the fluorescence difference of some CV/G-quadruplex complexes in the presence of K⁺ or Na⁺, and the fluorescence change with the variation of K⁺ concentration. According to the nature of the fluorescence change of CV as a function of ionic conditions, two K⁺ detection modes can be developed. One is a fluorescence-decreasing mode, in which T₃TT₃ (5′-GGGTTTGGGTGGGTTTGGG) is used, and the fluorescence of CV decreases with an increased concentration of K⁺. The other is a fluorescence-increasing mode, in which Hum21 (5′-GGGTTAGGGTTAGGGTTAGGG) is used, and the fluorescence of CV increases with an increased concentration of K⁺. Compared with some published K⁺ detection methods, this method has some important characteristics, such as lower cost of the test, higher concentrations of Na⁺ that can be tolerated, adjustable linear detection range and longer excitation and emission wavelengths. Preliminary results demonstrated that the method might be used in biological systems, for example in urine.     

Role of DNA/RNA sensors and contribution to autoimmunity

Innate immune detection and subsequent immune responses rely on the initial recognition of pathogen specific molecular motifs. Foreign nucleic acids are key structures recognised by the immune system, recognition of which occurs mainly through the use of nucleic acid receptors including members of the Toll-like receptors, AIM2-like receptors, RIG-I-like receptors and intracellular DNA receptors. While the immune system is critically important in protecting the host from infection, it is of utmost importance that it is tightly regulated, in order to prevent recognition of self-nucleic acids and the subsequent development of autoimmunity. Defects in the mechanisms regulating such pathways, for example mutations in endonucleases that clear DNA, altered expression of nucleic acid sensors and defects in negative regulators of these signalling pathways involved in RNA/DNA sensing, have all been implicated in promoting the generation of autoimmune responses. This evidence, as reviewed here, suggests that novel therapeutics targeting these sensors and their downstream pathways may be of use in the treatment of patients with autoimmune diseases such as systemic lupus erythematosus, rheumatoid arthritis and primary Sjögren's syndrome.     

Recognition and detection of 8-oxo-rG in RNA using the DNA/OMeRNA chimera probes containing fluorescent adenosine-diazaphenoxazine analog

Recent studies indicate that oxidative damage to RNA results in dysfunction of translation and eventual pathogenesis. A representative oxidized base in RNA is 8-hydroxyguanosine (8-oxo-rG), however, unlike its DNA counterpart (8-oxo-dG), its role in pathogenesis has not attracted much attention until recently. The 2′-deoxyadenosine derivative with a diazaphenoxazine skeleton at the 6-amino group (Adap) was shown to be selective for 8-oxo-dG in DNA. In this study, the 2′-O-methoxy derivative of Adap (2′-OMeAdap) was designed as a selective molecule for 8-oxo-rG in RNA. 8-Oxo-rG in the homopurine RNA was selectively recognized by the ODN probe incorporating Adap. In contrast, although it was not possible by the Adap-containing ODN prove due to the instability of the corresponding duplex, 8-oxo-rG in homopyrimidine RNA was selectively detected by the 2′-OMeRNA probe incorporating 2′-OMeAdap.     

Determination of betaxolol in human aqueous humour by high-performance liquid chromatography with fluorescence detection

A reversed-phase high-performance liquid chromatographic method is described for the determination of betaxolol in human aqueous humour. Betaxolol and the internal standard metoprolol were extracted with cyclohexane and separated on a reversed-phase column (Luna C(18), 250 x 4.6 mm, 5 microm) with a mobile phase containing acetonitrile-phosphate buffer (40:60, v/v) at a flow-rate of 0.8 ml/min. The column effluent was monitored with a fluorescence detector at 227 nm (excitation) and 301 nm (emission). The retention times for metoprolol and betaxolol were 3.55 and 5.63 min, respectively. The recovery from aqueous humour was found to be 71.6% for betaxolol at 1.25 microg/ml. The within-day and day-to-day accuracy values were in the range of 96.17-105.2% for betaxolol at 0.1, 4 and 12 microg/ml (n=6), within-day and day-to-day precision values were less than 10% for betaxolol at the concentrations given above. The detection limit corresponding to the signal-to-noise ratio of 3:1 was 15 ng/ml. The presented method was suitable for measuring betaxolol levels in human aqueous humour samples obtained from patients after topical administration.     

Chip-based detection of hepatitis C virus using RNA aptamers that specifically bind to HCV core antigen

The development of reagents with high affinity and specificity to the antigens of hepatitis C virus (HCV) is important for the early stage diagnosis of its infection. Aptamers are short, single-stranded oligonucleotides with the ability to specifically recognize target molecules with high affinity. Herein, we report the selection of RNA aptamers that bind to the core antigen of HCV. High affinity aptamers were isolated from a 10(15) random library of 60 mer RNAs using the SELEX procedure. Importantly, the selected aptamers specifically bound to the core antigen, but not to another HCV antigen, NS5, in a protein chip-based assay. Using these aptamers, we developed an aptamer-based biosensor for HCV diagnosis and detected the core antigen from HCV infected patients' sera with good specificity. This novel aptamer-based antigen detection sensor could be applied to the early diagnosis of HCV infection.     

Fluorescence quantitation of thyrocyte iodide accumulation with the yellow fluorescent protein variant YFP-H148Q/I152L

The thyroid gland accumulates iodide for the synthesis of thyroid hormones. The aim of the current study was to quantify iodide accumulation in cultured thyroid cells by live cell imaging using the halide-sensitive yellow fluorescent protein (YFP) variant YFP-H148Q/I152L. In vivo calibrations were performed in FRTL-5 thyrocytes to determine the sensitivity of YFP-H148Q/I152L to iodide. In the presence of ion-selective ionophores, YFP-H148Q/I152L fluorescence was suppressed by halides in a pH-dependent manner with 20-fold selectivity for iodide versus chloride and competition between the two halides. At a physiological pH of 7 and a chloride concentration of 15mM, the affinity constant of YFP-H148Q/I152L for iodide was 3.5mM. In intact FRTL-5 cells, iodide induced a reversible decrease in YFP-H148Q/I152L fluorescence. FRTL-5 cells concentrated iodide to 60 times the extracellular concentration. Iodide influx exhibited saturation kinetics with respect to extracellular iodide with a K(m) of 35 microM and a V(max) of 55 microM/s. Iodide efflux exhibited saturation kinetics with respect to intracellular iodide concentration with a K(m) of 2.2mM and a V(max) of 43 microM/s. The results of this study demonstrate the utility of YFP-H148Q/I152L as a sensitive and selective biosensor for the quantification of iodide accumulation in thyroid cells.     

Design and synthesis of ICT-based fluorescent probe for high-sensitivity protein detection and application to rapid protein staining for SDS-PAGE

A novel fluorescent molecular probe possessing styryl, sulfonyl, and cyanopyranyl moieties that was termed compound 1 was designed and synthesized to detect proteins through noncovalent bonding. Compound 1 did not produce fluorescence emission in the absence of proteins. However, its fluorescence spectrum showed a dramatic increase in the fluorescence intensity and strong orange emission after the addition of BSA. These changes were caused by intramolecular charge transfer (ICT). The fluorescence intensities of compound 1 were plotted as a function of the protein concentrations. A good linear relationship was observed up to a protein concentration of 325 mug/mL, and the detection limit was 70 ng/mL under the given assay conditions; this detection limit was higher than that of previously reported compounds. To demonstrate the application of compound 1, proteins in an SDS-PAGE gel were stained with compound 1 and were successfully imaged with a higher sensitivity and shorter staining operation time as compared to those of the silver staining method and SYPRO Ruby staining method. Thus, easy and high-sensitivity protein detection can be performed with the fluorescent probe, and this probe is ideally suited to proteomic applications.     

Facile synthesis of AgNPs@SNCDs nanocomposites as a fluorescent ‘turn on’ sensor for detection of glutathione

The present study illustrates the facile synthesis of silver nanoparticles capped with sulfur and nitrogen co‐doped carbon dots (AgNPs@SNCDs) nanocomposites and their application towards the sensitive and selective detection of glutathione (GSH) using a spectrofluorimetry method. SNCDs were synthesized using solvothermal treatment of cysteamine hydrochloride and p‐phenylenediamine. The as‐fabricated SNCDs were then utilized as capping and stabilizing agents for the preparation of AgNPs@SNCDs nanocomposites using wet chemistry. The size of AgNPs@SNCDs nanocomposites was characterized to be ~37.58 nm or even larger aggregates. Particularly, the quenched fluorescence of AgNPs@SNCDs nanocomposites could be significantly restored upon addition of GSH, and the colour of its solution changed to some extent. The fluorescence intensity ratio of AgNPs@SNCDs nanocomposites at ~450 nm and 550 nm was directly proportional to the GSH concentration within the ranges 8.35–66.83 μM and 66.83–200.5 μM, and the detection limit was 0.52 μM. Furthermore various common organic molecules had no obvious interference in the detection mode. The proposed nanosensor was successfully applied for GSH assay in actual water samples.     

Postcolumn nucleic acid intercalation for the fluorescent detection of nucleic acids using ion pair reverse phase high-performance liquid chromatography

Here we report a simple and effective procedure enabling the fluorescent detection of nucleic acids following the rapid, high-resolution separation using ion pair reverse phase chromatography. This approach uses postcolumn nucleic acid intercalation of fluorescent dyes with subsequent fluorescent detection, demonstrating more than a 1000-fold increase in sensitivity in the detection of nucleic acids when compared with traditional UV detection. Moreover, a wide range of intercalating dyes can be incorporated, including those known to disrupt the structure of the nucleic acids, thereby enabling the sensitive detection of DNA and RNA with no adverse effect on resolution of the nucleic acids during ion pair reverse phase chromatography. In addition, such approaches allow one to readily distinguish single-stranded DNA from double-stranded DNA following their separation using ion pair reverse phase high-performance liquid chromatography.