Downstream elements of mammalian pre-mRNA polyadenylation signals: primary,secondary and higher-order structures

Primary, secondary and higher-order structures of downstream elements of mammalian pre-mRNA polyadenylation signals [poly(A) signals] are re viewed. We have carried out a detailed analysis on our database of 244 human pre-mRNA poly(A) signals in order to characterize elements in their downstream regions. We suggest that the downstream region of the mammalian pre-mRNA poly(A) signal consists of various simple elements located at different distances from each other. Thus, the downstream region is not described by any precise consensus. Searching our database, we found that ~80% of pre-mRNAs with the AAUAAA or AUUAAA core upstream elements contain simple downstream elements, consisting of U-rich and/or 2GU/U tracts, the former occurring ~2-fold more often than the latter. Approximately one-third of the pre-mRNAs analyzed here contain sequences that may form G-quadruplexes. A substantial number of these sequences are located immediately downstream of the poly(A) signal. A possible role of G-rich sequences in the polyadenylation process is discussed. A model of the secondary structure of the SV40 late pre-mRNA poly(A) signal downstream region is presented.     

Cleavage site determinants in the mammalian polyadenylation signal.

Using a series of position and nucleotide variants of the SV40 late polyadenylation signal we have demonstrated that three sequence elements determine the precise site of 3-end cleavage in mammalian pre-mRNAs: an upstream AAUAAA element, a down-stream U-rich element consisting of five nucleotides, at least four of which are uridine, and a nucleotide preference at the site of cleavage in the order A > U > C >> G. Cleavage occurs no closer than 11 bases, but no further than 23 bases from the AAUAAA element. The downstream U-rich element is usually located 10-30 bases from the cleavage site. The relative position of the AAUAAA and the U-rich elements define the approximate region within a 13 base domain in which cleavage will occur. The exact position of cleavage is then determined by the local nucleotide sequence in the order of preference noted above. This model accounts for nearly three quarters of polyadenylation signals surveyed and is consistent with previous experimental observations.     

An RNA secondary structure juxtaposes two remote genetic signals for human T-cell leukemia virus type I RNA 3'-end processing.

Sequence analysis of the human T-cell leukemia virus type I (HTLV-I) long terminal repeat (LTR) does not reveal a polyadenylation consensus sequence, AAUAAA, close to the polyadenylation site at the 3' end of the viral RNA. Using site-directed mutagenesis, we demonstrated that two cis-acting signals are required for efficient RNA processing in HTLV-I LTR: (i) a remote AAUAAA hexamer at a distance of 276 nucleotides upstream of the polyadenylation site, and (ii) the 20-nucleotide GU-rich sequence immediately downstream from the poly(A) site. It has been postulated that the folding of RNA into a secondary structure juxtaposes the AAUAAA sequence, in a noncontiguous manner, to within 14 nucleotides of the polyadenylation site. To test this hypothesis, we introduced deletions and point mutations within the U3 and R regions of the LTR. RNA 3'-end processing occurred efficiently at the authentic HTLV-I poly(A) site after deletion of the sequences predicted to form the secondary structure. Thus, the genetic analysis supports the hypothesis that folding of the HTLV-I RNA in the U3 and R regions juxtaposes the AAUAAA sequence and the poly(A) site to the correct functional distance. This unique arrangement of RNA-processing signals is also found in the related retroviruses HTLV-II and bovine leukemia virus.     

Functionally significant secondary structure of the simian virus 40 late polyadenylation signal

The structure of the highly efficient simian virus 40 late polyadenylation signal (LPA signal) is more complex than those of most known mammalian polyadenylation signals. It contains efficiency elements both upstream and downstream of the AAUAAA region, and the downstream region contains three defined elements (two U-rich elements and one G-rich element) instead of the single U- or GU-rich element found in most polyadenylation signals. Since many reports have indicated that the secondary structure in RNA may play a significant role in RNA processing, we have used nuclease structure analysis techniques to determine the secondary structure of the LPA signal. We find that the LPA signal has a functionally significant secondary structure. Much of the region upstream of AAUAAA is sensitive to single-strand-specific nucleases. The region downstream of AAUAAA has both double- and single-stranded characteristics. Both U-rich elements are predominately sensitive to the double-strand-specific nuclease RNase V(1), while the G-rich element is primarily single stranded. The U-rich element closest to AAUAAA contains four distinct RNase V(1)-sensitive regions, which we have designated structural region 1 (SR1), SR2, SR3, and SR4. Linker scanning mutants in the downstream region were analyzed both for structure and for function by in vitro cleavage analyses. These data show that the ability of the downstream region, particularly SR3, to form double-stranded structures correlates with efficient in vitro cleavage. We discuss the possibility that secondary structure downstream of the AAUAAA may be important for the functions of polyadenylation signals in general.     

Modulation of formation of the 3’-end of the human argininosuccinate synthetase mRNA by GT-repeat polymorphism

Microsatellites are abundant in the human genome and may acquire context-dependent functions. A highly polymorphic GT microsatellite is located downstream of the poly(A) signal of the human argininosuccinate synthetase (ASS1) gene. The ASS1 participates in urea and nitric oxide production and is a rate-limiting enzyme in arginine biosynthesis. To examine possible involvement of the GT microsatellite in ASS1 mRNA 3’-end formation, ASS1 minigene constructs were used in transient transfection for assessment of poly(A) site usage by S1 nuclease mapping. Synthesis of the major human ASS1 mRNA is found to be controlled by two consecutive non-canonical poly(A) signals, UAUAAA and AUUAAA, located 7 nucleotides apart where a U-rich sequence and the GU microsatellite serve as their respective downstream GU/U-rich elements. Moreover, AUUAAA utilization is affected by the GU-repeat number possibly leading to differential regulation of ASS1 polyadenylation in individuals with different repeat numbers. Interestingly, the less efficient UAUAAA motif is noted to be the major ASS1 poly(A) signal possibly as a result of an indispensable downstream U-rich element and restricted utilization of the AUUAAA motif by the presence of extended GU-repeats. The UAUAAA motif and the GT microsatellite are conserved only in primates whereas AUUAAA motif is present in all mammals analyzed. The suboptimal UAUAAA motif and the utilization of the polymorphic GT microsatellite as polyadenylation signal of the ASS1 gene may be used as a strategy in primates to modulate ASS1 level in response to interactions of genetic and environmental factors.     

RNA recognition by the human polyadenylation factor CstF.

Polyadenylation of mammalian mRNA precursors requires at least two signal sequences in the RNA: the nearly invariant AAUAAA, situated 5' to the site of polyadenylation, and a much more variable GU- or U-rich downstream element. At least some downstream sequences are recognized by the heterotrimeric polyadenylation factor CstF, although how, and indeed if, all variations of this diffuse element are bound by a single factor is unknown. Here we show that the RNP-type RNA binding domain of the 64-kDa subunit of CstF (CstF-64) (64K RBD) is sufficient to define a functional downstream element. Selection-amplification (SELEX) experiments employing a glutathione S-transferase (GST)-64K RBD fusion protein selected GU-rich sequences that defined consensus recognition motifs closely matching those present in natural poly(A) sites. Selected sequences were bound specifically, and with surprisingly high affinities, by intact CstF and were functional in reconstituted, CstF-dependent cleavage assays. Our results also indicate that GU- and U-rich sequences are variants of a single CstF recognition motif. For comparison, SELEX was performed with a GST fusion containing the RBD from the apparent yeast homolog of CstF-64, RNA15. Strikingly, although the two RBDs are almost 50% identical and yeast poly(A) signals are at least as degenerate as the mammalian downstream element, a nearly invariant 12-base U-rich sequence distinct from the CstF-64 consensus was identified. We discuss these results in terms of the function and evolution of mRNA 3'-end signals.     

Recruitment of a basal polyadenylation factor by the upstream sequence element of the human lamin B2 polyadenylation signal

We have investigated how the upstream sequence element (USE) of the lamin B2 poly(A) signal mediates efficient 3'-end formation. In vitro analysis demonstrates that this USE increases both the efficiency of 3'-end cleavage and the processivity of poly(A) addition. Cross-linking using selectively labeled synthetic RNAs confirms that cleavage stimulation factor interacts with the sequences downstream of the cleavage site, while electrophoresis mobility shift assays demonstrate that the USE directly stabilizes the binding of the cleavage and polyadenylation specificity factor to the poly(A) signal. Thus in common with other poly(A) signals, the lamin B2 USE directly enhances the binding of basal poly(A) factors. In addition, a novel 55-kDa protein binds to the USE and the core poly(A) signal and appears to inhibit cleavage. The binding activity of this factor appears to change during the cell cycle, being greatest in S phase, when the lamin B2 gene is transcribed.     

Molecular analyses of two poly(A) site-processing factors that determine the recognition and efficiency of cleavage of the pre-mRNA.

Poly(A) site processing of a pre-mRNA requires the participation of multiple nuclear factors. Two of these factors recognize specific sequences in the pre-mRNA and form a stable processing complex. Since these initial interactions are likely critical for the recognition of the poly(A) site and the efficiency of poly(A) site use, we have characterized these factors and the nature of their interaction with the pre-mRNA. The AAUAAA specificity factor PF2 is a large, multicomponent complex composed of at least five distinct polypeptides ranging in molecular size from 170 to 42 kDa. The 170-kDa polypeptide appears to mediate interaction with the pre-mRNA. Factor CF1, which provides specificity for the downstream G + U-rich element and stabilizes the PF2 interaction on the RNA, is also a multicomponent complex but is less complex than PF2. CF1 is composed of three polypeptides of molecular sizes 76, 64, and 48 kDa. UV cross-linking assays demonstrate that the 64-kDa polypeptide makes direct contact with the RNA, dependent on the G + U-rich downstream sequence element. Moreover, it is clear that these RNA-protein interactions are influenced by the apparent cooperative interaction involving PF2 and CF1, interactions that contribute to the efficiency of poly(A) site processing.     

Human Fip1 is a subunit of CPSF that binds to U-rich RNA elements and stimulates poly(A) polymerase

In mammals, polyadenylation of mRNA precursors (pre-mRNAs) by poly(A) polymerase (PAP) depends on cleavage and polyadenylation specificity factor (CPSF). CPSF is a multisubunit complex that binds to the canonical AAUAAA hexamer and to U-rich upstream sequence elements on the pre-mRNA, thereby stimulating the otherwise weakly active and nonspecific polymerase to elongate efficiently RNAs containing a poly(A) signal. Based on sequence similarity to the Saccharomyces cerevisiae polyadenylation factor Fip1p, we have identified human Fip1 (hFip1) and found that the protein is an integral subunit of CPSF. hFip1 interacts with PAP and has an arginine-rich RNA-binding motif that preferentially binds to U-rich sequence elements on the pre-mRNA. Recombinant hFip1 is sufficient to stimulate the in vitro polyadenylation activity of PAP in a U-rich element-dependent manner. hFip1, CPSF160 and PAP form a ternary complex in vitro, suggesting that hFip1 and CPSF160 act together in poly(A) site recognition and in cooperative recruitment of PAP to the RNA. These results show that hFip1 significantly contributes to CPSF-mediated stimulation of PAP activity.     

Requirements for mini-exon inclusion in potato invertase mRNAs provides evidence for exon-scanning interactions in plants

Invertases are responsible for the breakdown of sucrose to fructose and glucose. In all but one plant invertase gene, the second exon is only 9 nt in length and encodes three amino acids of a five-amino-acid sequence that is highly conserved in all invertases of plant origin. Sequences responsible for normal splicing (inclusion) of exon 2 have been investigated in vivo using the potato invertase, invGF gene. The upstream intron 1 is required for inclusion whereas the downstream intron 2 is not. Mutations within intron 1 have identified two sequence elements that are needed for inclusion: a putative branchpoint sequence and an adjacent U-rich region. Both are recognized plant intron splicing signals. The branchpoint sequence lies further upstream from the 3' splice site of intron 1 than is normally seen in plant introns. All dicotyledonous plant invertase genes contain this arrangement of sequence elements: a distal branchpoint sequence and adjacent, downstream U-rich region. Intron 1 sequences upstream of the branchpoint and sequences in exons 1, 2, or 3 do not determine inclusion, suggesting that intron or exon splicing enhancer elements seen in vertebrate mini-exon systems are absent. In addition, mutation of the 3' and 5' splice sites flanking the mini-exon cause skipping of the mini-exon, suggesting that both splice sites are required. The branchpoint/U-rich sequence is able to promote splicing of mini-exons of 6, 3, and 1 nt in length and of a chicken cTNT mini-exon of 6 nt. These sequence elements therefore act as a splicing enhancer and appear to function via interactions between factors bound at the branchpoint/U-rich region and at the 5' splice site of intron 2, activating removal of this intron followed by removal of intron 1. This first example of splicing of a plant mini-exon to be analyzed demonstrates that particular arrangement of standard plant intron splicing signals can drive constitutive splicing of a mini-exon.     

Recognition of polyadenylation sites in yeast pre-mRNAs by cleavage and polyadenylation factor.

Recognition of poly(A) sites in yeast pre-mRNAs is poorly understood. Employing an in vitro cleavage system with cleavage and polyadenylation factor (CPF) and cleavage factor IA we show that the efficiency and positioning elements are dispensable for poly(A)-site recognition within a short CYC1 substrate in vitro. Instead, U-rich elements immediately upstream and downstream of the poly(A) site mediate cleavage-site recognition within CYC1 and ADH1 pre-mRNAs. These elements act in concert with the poly(A) site to produce multiple recognition sites for the processing machinery, since combinations of mutations within these elements were most effective in cleavage inhibition. Intriguingly, introduction of a U-rich element downstream of the GAL7 poly(A) site strongly enhanced cleavage, underscoring the importance of downstream sequences in general. RNA- binding analyses demonstrate that cleavage depends on the recognition of the poly(A)-site region by CPF. Consistent with in vitro results, mutation of sequences upstream and downstream of the poly(A) site affected 3'-end formation in vivo. A model for yeast pre-mRNA cleavage-site recognition outlines an unanticipated high conservation of yeast and mammalian 3'-end processing mechanisms.