Insights into the Role of the Unusual Disulfide Bond in Copper-Zinc Superoxide Dismutase

The functional and structural significance of the intrasubunit disulfide bond in copper-zinc superoxide dismutase (SOD1) was studied by characterizing mutant forms of human SOD1 (hSOD) and yeast SOD1 lacking the disulfide bond. We determined x-ray crystal structures of metal-bound and metal-deficient hC57S SOD1. C57S hSOD1 isolated from yeast contained four zinc ions per protein dimer and was structurally very similar to wild type. The addition of copper to this four-zinc protein gave properly reconstituted 2Cu,2Zn C57S hSOD, and its spectroscopic properties indicated that the coordination geometry of the copper was remarkably similar to that of holo wild type hSOD1. In contrast, the addition of copper and zinc ions to apo C57S human SOD1 failed to give proper reconstitution. Using pulse radiolysis, we determined SOD activities of yeast and human SOD1s lacking disulfide bonds and found that they were enzymatically active at ∼10% of the wild type rate. These results are contrary to earlier reports that the intrasubunit disulfide bonds in SOD1 are essential for SOD activity. Kinetic studies revealed further that the yeast mutant SOD1 had less ionic attraction for superoxide, possibly explaining the lower rates. Saccharomyces cerevisiae cells lacking the sod1 gene do not grow aerobically in the absence of lysine, but expression of C57S SOD1 increased growth to 30–50% of the growth of cells expressing wild type SOD1, supporting that C57S SOD1 retained a significant amount of activity.     

Familial amyotrophic lateral sclerosis mutants of copper/zinc superoxide dismutase are susceptible to disulfide reduction

We observed that 14 biologically metallated mutants of copper/zinc superoxide dismutase (SOD1) associated with familial amyotrophic lateral sclerosis all exhibited aberrantly accelerated mobility during partially denaturing PAGE and increased sensitivity to proteolytic digestion compared with wild type SOD1. Decreased metal binding site occupancy and exposure to the disulfide-reducing agents dithiothreitol, Tris(2-carboxyethyl)phosphine (TCEP), or reduced glutathione increased the fraction of anomalously migrating mutant SOD1 proteins. Furthermore, the incubation of mutant SOD1s with TCEP increased the accessibility to iodoacetamide of cysteine residues that normally participate in the formation of the intrasubunit disulfide bond (Cys-57 to Cys-146) or are buried within the core of the beta-barrel (Cys-6). SOD1 enzymes in spinal cord lysates from G85R and G93A mutant but not wild type SOD1 transgenic mice also exhibited abnormal vulnerability to TCEP, which exposed normally inaccessible cysteine residues to modification by maleimide conjugated to polyethylene glycol. These results implicate SOD1 destabilization under cellular disulfide-reducing conditions at physiological pH and temperature as a shared property that may be relevant to amyotrophic lateral sclerosis mutant neurotoxicity.     

Folding of Escherichia coli DsbC: characterization of a monomeric folding intermediate

The homodimeric protein DsbC is a disulfide isomerase and a chaperone located in the periplasm of Escherichia coli. We have studied the guanidine hydrochloride (GdnHCl)-induced unfolding and refolding of DsbC using mutagenesis, intrinsic fluorescence, circular dichroism spectra, size-exclusion chromatography, and sedimentation velocity analysis. The equilibrium refolding and unfolding of DsbC was thermodynamically reversible. The equilibrium folding profile measured by fluorescence excited at 280 nm exhibited a three-state transition profile with a stable folding intermediate formed at 0-2.0 M GdnHCl followed by a second transition at higher GdnHCl concentrations. Sedimentation velocity data revealed dissociation of the dimer to the monomer over the concentration range of the first transition (0-2.0 M). In contrast, fluorescence emission data for DsbC excited at 295 nm showed a single two-state transition. Fluorescence emission data for the equilibrium unfolding of the monomeric G49R mutant, excited at either 295 or 280 nm, indicated a single two-state transition. Data obtained for the dimeric Y52W mutant indicated a strong protein concentration dependence of the first transition but no dependence of the second transition in equilibrium unfolding. This suggests that the fluorescence of Y52W sensitively reports conformational changes caused by dissociation of the dimer. Thus, the folding of DsbC follows a three-state transition model with a monomeric folding intermediate formed in 0-2.0 M GdnHCl. The folding of DsbC in the presence of DTT indicates an important role for the non-active site disulfide bond in stabilizing the conformation of the molecule. Dimerization ensures the performance of chaperone and isomerase functions of DsbC.     

An intersubunit disulfide bond prevents in vitro aggregation of a superoxide dismutase-1 mutant linked to familial amytrophic lateral sclerosis

Familial amyotrophic lateral sclerosis (FALS) is linked to over 90 point mutations in superoxide dismutase-1 (SOD1), a dimeric metalloenzyme. The postmortem FALS brain is characterized by SOD1 inclusions in the motor neurons of regions in which neuronal loss is most significant. These findings, together with animal modeling studies, suggest that aggregation of mutant SOD1 produces a pathogenic species. We demonstrate here that a mutant form of SOD1 (A4V) that is linked to a particularly aggressive form of FALS aggregates in vitro, while wild-type SOD1 (WT) is stable. Some A4V aggregates resemble amyloid pores formed by other disease-associated proteins. The WT dimer is significantly more stable than the A4V dimer, suggesting that dimer dissociation may be the required first step of aggregation. To test this hypothesis, an intersubunit disulfide bond between symmetry-related residues at the A4V dimer interface was introduced. The resultant disulfide bond (V148C-V148C') eliminated the concentration-dependent loss of enzymatic activity of A4V, stabilized the A4V dimer, and completely abolished aggregation. A drug-like molecule that could stabilize the A4V dimer could slow the onset and progression of FALS.     

Copper stabilizes a heterodimer of the yCCS metallochaperone and its target superoxide dismutase

The copper chaperone for superoxide dismutase (CCS) activates the antioxidant enzyme Cu,Zn-SOD (SOD1) by directly inserting the copper cofactor into the apo form of SOD1. Neither the mechanism of protein-protein recognition nor of metal transfer is clear. The metal transfer step has been proposed to occur within a transient copper donor/acceptor complex that is either a heterodimer or heterotetramer (i.e. a dimer of dimers). To determine the nature of this intermediate, we generated a mutant form of SOD1 by replacing a copper binding residue His-48 with phenylalanine. This protein cannot accept copper from CCS but does form a stable complex with apo- and Cu-CCS, as observed by immunoprecipitation and native gel electrophoresis. Fluorescence anisotropy measurements corroborate the formation of this species and further indicate that copper enhances the stability of the dimer by an order of magnitude. The copper form of the heterodimer was isolated by gel filtration chromatography and contains one copper and one zinc atom per heterodimer. These results support a mechanism for copper transfer in which CCS and SOD1 dock via their highly conserved dimer interfaces in a manner that precisely orients the Cys-rich copper donor sites of CCS and the His-rich acceptor sites of SOD1 to form a copper-bridged intermediate.     

Pathogenic superoxide dismutase structure, folding, aggregation and turnover

Significant advances have been made during the past two years toward an understanding of the molecular basis for how mutations in human cytosolic copper-zinc superoxide dismutase (SOD1) cause the inherited form of amyotrophic lateral sclerosis (ALS). Biophysical studies suggest that the pathogenic mutations destabilize loop or beta-barrel structural elements of the protein. With few exceptions, the loss of metal ions and reduction of the intrasubunit disulfide bond enhance this destabilization. In mouse models of the disease, the formation of visible aggregates containing mutant SOD1 occurs relatively late in the lifespan, hinting that the quality control and protein turnover systems of motor neurons eventually become overwhelmed or compromised. Studies probing SOD1 turnover have suggested the possibility that proteolytic breakdown products may play a role in pathogenesis.     

Subunit dissociation of Busycon canaliculatum hemocyanin

The hemocyanin of the channeled whelk, Busycon canaliculatum, is a multisubunit protein with a molecular weight close to 9 X 10(6). The increase in pH above neutrality and the addition of 0-5 M urea and 0-2 M GdnHCl is found to dissociate the whole molecules to half-molecules and smaller dimeric and monomeric fragments of one-tenth and one-twentieth mass of the parent hemocyanin. The molecular weight transitions investigated at constant protein concentration of 5 X 10(-2) g X l-1 show no clearly discernible plateau regions, where essentially only half-molecules and one-tenth molecules are present. The ultracentrifugation patterns in much of the dissociation region produced by urea at pH 6.9 suggests the presence of three distinct components consisting of whole molecules, half-molecules and largely one-tenth molecular weight fragments. At pH 8.2 and higher, where whole molecules are largely absent, the effects of urea on the dissociation of half-molecules to tenths and tenth-molecules to twentieth molecule was investigated by means of light scattering. Analysis of the urea data based on a decamer to dimer and dimer to monomer scheme of dissociation used in our earlier studies gave apparent estimates of about 90 amino acid groups at the contact areas of the dimers in the half-molecules and 110 groups at the monomer contacts forming the dimers. The latter relatively large estimate of groups suggests that the dissociation of the tenth molecules or dimers must occur by longitudinal splitting of the contact areas along both the folded domains and the connecting chain segments of the twentieth molecules. Circular dichroism, absorbance and viscosity data suggest that the secondary structure and conformation of the folded domains of the hemocyanin subunits are largely retained at both high pH and in 3-8 M urea solutions. The molecular weights at pH 9.0-10.6 and in 3-8 M urea are found to be (4.2-4.7) X 10(5), close to one-twentieth of the mass of the parent hemocyanin. Denaturation and unfolding of the subunit domains is observed between 3 and 6 M GdnHCl solutions, as evidenced by the abolition of the characteristic copper absorbance in the neighborhood of 346 nm and the relatively pronounced changes in circular dichroism at 222 nm and intrinsic viscosity. The further decrease in molecular weights to about (2.6-3.2) X 10(5), below one-twentieth of the mass of hemocyanin suggests the presence of hidden breaks or scissions in the polypeptide chains suffered during isolation, which become exposed as a result of complete unfolding in GdnHCl solutions.(ABSTRACT TRUNCATED AT 400 WORDS)     

Aberrantly increased hydrophobicity shared by mutants of Cu,Zn-superoxide dismutase in familial amyotrophic lateral sclerosis

More than 100 different mutations in the gene encoding Cu,Zn-superoxide dismutase (SOD1) cause preferential motor neuron degeneration in familial amyotrophic lateral sclerosis (ALS). Although the cellular target(s) of mutant SOD1 toxicity have not been precisely specified, evidence to date supports the hypothesis that ALS-related mutations may increase the burden of partially unfolded SOD1 species. Influences that may destabilize SOD1 in vivo include impaired metal ion binding, reduction of the intrasubunit disulfide bond, or oxidative modification. In this study, we observed that metal-deficient as-isolated SOD1 mutants (H46R, G85R, D124V, D125H, and S134N) with disordered electrostatic and zinc-binding loops exhibited aberrant binding to hydrophobic beads in the absence of other destabilizing agents. Other purified ALS-related mutants that can biologically incorporate nearly normal amounts of stabilizing zinc ions (A4V, L38V, G41S, D90A, and G93A) exhibited maximal hydrophobic behavior after exposure to both a disulfide reducing agent and a metal chelator, while normal SOD1 was more resistant to these agents. Moreover, we detected hydrophobic SOD1 species in lysates from affected tissues in G85R and G93A mutant but not wildtype SOD1 transgenic mice. These findings suggest that a susceptibility to the cellular disulfide reducing environment and zinc loss may convert otherwise stable SOD1 mutants into metal-deficient forms with locally destabilized electrostatic and zinc-binding loops. These abnormally hydrophobic SOD1 species may promote aberrant interactions of the enzyme with itself or with other cellular constituents to produce toxicity in familial ALS.     

Tetrameric N(5)-(L-1-carboxyethyl)-L-ornithine synthase: guanidine. HCl-induced unfolding and a low temperature requirement for refolding.

Guanidine x HCl (GdnHCl)-induced unfolding of tetrameric N(5)-(L-1-carboxyethyl)-L-ornithine synthase (CEOS; 141,300 M(r)) from Lactococcus lactis at pH 7.2 and 25 degrees C occurred in several phases. The enzyme was inactivated at approximately 1 M GdnHCl. A time-, temperature-, and concentration-dependent formation of soluble protein aggregates occurred at 0.5-1.5 M GdnHCl due to an increased exposure of apolar surfaces. A transition from tetramer to unfolded monomer was observed between 2 and 3.5 M GdnHCl (without observable dimer or trimer intermediates), as evidenced by tyrosyl and tryptophanyl fluorescence changes, sulfhydryl group exposure, loss of secondary structure, size-exclusion chromatography, and sedimentation equilibrium data. GdnHCl-induced dissociation and unfolding of tetrameric CEOS was concerted, and yields of reactivated CEOS by dilution from 5 M GdnHCl were improved when unfolding took place on ice rather than at 25 degrees C. Refolding and reconstitution of the enzyme were optimal at 相似文献   

Sliding clamp of the bacteriophage T4 polymerase has open and closed subunit interfaces in solution.

The sliding clamps of bacteriophage T4 (gp45), Escherichia coli (beta clamp), and yeast (PCNA) are required for processive DNA synthesis by their cognate DNA polymerases. The X-ray crystal structures of all three of these clamps have been shown to be closed, circular complexes. This paper reports investigations of the solution structure of bacteriophage T4 gp45 by analytical ultracentrifugation, fluorescence, and hydrodynamic modeling. Mutants of gp45 with inter- and intrasubunit disulfide bonds were created to alter the solution structure of gp45, with additional mutagenesis used to investigate the importance of the proline-rich loop region found between the two domains of each gp45 monomer. The wild-type gp45 trimer assembles from monomers cooperatively with a dissociation constant of 0.21 microM2 and values between 0.088 and 0. 32 microM2 for the mutants. Velocity ultracentrifugation experiments showed that wild-type gp45 possesses a sedimentation coefficient strongly dependent on concentration, typical of asymmetric or elongated molecules, that when extrapolated to zero concentration yields a sedimentation coefficient of 4.0 S. The loop and the disulfide mutants exhibited sedimentation coefficients with little concentration dependence, typical of symmetric or spherical molecules, that when extrapolated to zero concentration yielded sedimentation coefficients of 4.4-4.8 S. The lower sedimentation coefficient in the former case is consistent with wild-type gp45 being more asymmetric or elongated than the mutant forms. Fluorescence-resonance energy-transfer experiments were used to measure the distance between two amino acids (W91 and V162C-coumarin) on opposite sides of the gp45 subunit interface. For an intrasubunit disulfide mutant, the distance between these two amino acids was determined to be 19 A (14 A in the X-ray crystal structure), consistent with a closed complex. For the mutants without intrasubunit disulfides, the efficiency of fluorescence-resonance energy transfer was in accord with a model of gp45 being an open complex composed of two closed subunit interfaces and a third open interface separated by a distance of 35-38 A. The collective data supplemented with hydrodynamic modeling were consistent with gp45 subunit separation achieved within the plane of the gp45 ring.     

Contributions of a disulfide bond to the structure, stability, and dimerization of human IgG1 antibody CH3 domain

Recombinant human monoclonal antibodies have become important protein-based therapeutics for the treatment of various diseases. The antibody structure is complex, consisting of beta-sheet rich domains stabilized by multiple disulfide bridges. The dimerization of the C(H)3 domain in the constant region of the heavy chain plays a pivotal role in the assembly of an antibody. This domain contains a single buried, highly conserved disulfide bond. This disulfide bond was not required for dimerization, since a recombinant human C(H)3 domain, even in the reduced state, existed as a dimer. Spectroscopic analyses showed that the secondary and tertiary structures of reduced and oxidized C(H)3 dimer were similar, but differences were observed. The reduced C(H)3 dimer was less stable than the oxidized form to denaturation by guanidinium chloride (GdmCl), pH, or heat. Equilibrium sedimentation revealed that the reduced dimer dissociated at lower GdmCl concentration than the oxidized form. This implies that the disulfide bond shifts the monomer-dimer equilibrium. Interestingly, the dimer-monomer dissociation transition occurred at lower GdmCl concentration than the unfolding transition. Thus, disulfide bond formation in the human C(H)3 domain is important for stability and dimerization. Here we show the importance of the role played by the disulfide bond and how it affects the stability and monomer-dimer equilibrium of the human C(H)3 domain. Hence, these results may have implications for the stability of the intact antibody.     

H2O2-induced intermolecular disulfide bond formation between receptor protein-tyrosine phosphatases

Receptor protein-tyrosine phosphatase alpha (RPTPalpha) belongs to the subfamily of receptor-like protein-tyrosine phosphatases that are characterized by two catalytic domains of which only the membrane-proximal one (D1) exhibits appreciable catalytic activity. The C-terminal catalytic domain (D2) regulates RPTPalpha catalytic activity by controlling rotational coupling within RPTPalpha dimers. RPTPalpha-D2 changes conformation and thereby rotational coupling within RPTPalpha dimers in response to changes in the cellular redox state. Here we report a decrease in motility of RPTPalpha from cells treated with H2O2 on non-reducing SDS-polyacrylamide gels to a position that corresponds to RPTPalpha dimers, indicating intermolecular disulfide bond formation. Using mutants of all individual cysteines in RPTPalpha and constructs encoding the individual protein-tyrosine phosphatase domains, we located the intermolecular disulfide bond to the catalytic Cys-723 in D2. Disulfide bond formation and dimer stabilization showed similar levels of concentration and time dependence. However, treatment of lysates with dithiothreitol abolished intermolecular disulfide bonds but not stable dimer formation. Intermolecular disulfide bond formation and rotational coupling were also found using a chimera of the extracellular domain of RPTPalpha fused to the transmembrane and intracellular domain of the leukocyte common antigen-related protein (LAR). These results suggest that H2O2 treatment leads to oxidation of the catalytic Cys in D2, which then rapidly forms a disulfide bond with the D2 catalytic Cys of the dyad-related monomer, rendering an inactive RPTP dimer. Recovery from oxidative stress first leads to the reduction of the disulfide bond followed by a slower refolding of the protein to the active conformation.     

Conformational analysis of intermediates involved in the in vitro folding pathways of recombinant human macrophage colony stimulating factor beta by sulfhydryl group trapping and hydrogen/deuterium pulsed labeling

In vitro oxidative folding of reduced recombinant human macrophage colony stimulating factor beta (rhm-CSFbeta) involves two major events: disulfide isomerization in the monomeric intermediates and disulfide-mediated dimerization. Kinetic analysis of rhm-CSFbeta folding indicated that monomer isomerization is slower than dimerization and is, in fact, the rate-determining step. A time-dependent determination of the number of free cysteines remaining was made after refolding commence. The folding intermediates revealed that rhm-CSFbeta folds systematically, forming disulfide bonds via multiple pathways. Mass spectrometric evidence indicates that native as well as non-native intrasubunit disulfide bonds form in monomeric intermediates. Initial dimerization is assumed to involve formation of disulfide bonds, Cys 157/159-Cys' 157/159. Among six intrasubunit disulfide bonds, Cys 48-Cys 139 and Cys' 48-Cys' 139 are assumed to be the last to form, while Cys 31-Cys' 31 is the last intersubunit disulfide bond that forms. Conformational properties of the folding intermediates were probed by H/D exchange pulsed labeling, which showed the coexistence of noncompact dimeric and monomeric species at early stages of folding. As renaturation progresses, the noncompact dimer undergoes significant structural rearrangement, forming a native-like dimer while the monomer maintains a noncompact conformation.     

Activation of superoxide dismutases: putting the metal to the pedal

Superoxide dismutases (SOD) are important anti-oxidant enzymes that guard against superoxide toxicity. Various SOD enzymes have been characterized that employ either a copper, manganese, iron or nickel co-factor to carry out the disproportionation of superoxide. This review focuses on the copper and manganese forms, with particular emphasis on how the metal is inserted in vivo into the active site of SOD. Copper and manganese SODs diverge greatly in sequence and also in the metal insertion process. The intracellular copper SODs of eukaryotes (SOD1) can obtain copper post-translationally, by way of interactions with the CCS copper chaperone. CCS also oxidizes an intrasubunit disulfide in SOD1. Adventitious oxidation of the disulfide can lead to gross misfolding of immature forms of SOD1, particularly with SOD1 mutants linked to amyotrophic lateral sclerosis. In the case of mitochondrial MnSOD of eukaryotes (SOD2), metal insertion cannot occur post-translationally, but requires new synthesis and mitochondrial import of the SOD2 polypeptide. SOD2 can also bind iron in vivo, but is inactive with iron. Such metal ion mis-incorporation with SOD2 can become prevalent upon disruption of mitochondrial metal homeostasis. Accurate and regulated metallation of copper and manganese SOD molecules is vital to cell survival in an oxygenated environment.     

Role of the propeptide in controlling conformation and assembly state of hepatitis B virus e-antigen

Hepatitis B virus “e-antigen” (HBeAg) is thought to be a soluble dimeric protein that is associated with chronic infection. It shares 149 residues with the viral capsid protein “core-antigen” (HBcAg), but has an additional 10-residue, hydrophobic, cysteine-containing amino-terminal propeptide whose presence correlates with physical, serological, and immunological differences between the two proteins. In HBcAg dimers, the subunits pair by forming a four-helix bundle stabilized by an intermolecular disulfide bond. The structure of HBeAg is probably similar but, instead, has two intramolecular disulfide bonds involving the propeptide. To compare the proteins directly and thereby clarify the role of the propeptide, we identified mutations and solution conditions that render both proteins as either soluble dimers or assembled capsids. Thermally induced unfolding monitored by circular dichroism, and electrophoresis of oxidized and reduced dimers, showed that the propeptide has a destabilizing effect and that the intramolecular disulfide bond forms preferentially and blocks the formation of the intermolecular disulfide bond that otherwise stabilizes the dimer. The HBeAg capsids are less regular than the HBcAg capsids; nevertheless, cryo-electron microscopy reconstructions confirm that they are constructed of dimers resembling those of HBcAg capsids. In them, a portion of the propeptide is visible near the dimer interface, suggesting that it intercalates there, consistent with the known formation of a disulfide bond between C(− 7) in the propeptide and C61 in the dimer interface. However, this intercalation distorts the dimer into an assembly-reluctant conformation.     

The ligand-binding conformation of Mr 46,000 mannose 6-phosphate-specific receptor. Acquisition of binding activity during in vitro synthesis

Purified Mr 46,000 mannose 6-phosphate-specific receptor (MPR 46) lost its ligand-binding activity after reductive alkylation and after enzymatic deglycosylation. Deglycosylated MPR 46 did not assemble to homodimers. Therefore, we investigated the role of N-glycosylation, intrasubunit disulfide bonds, and subunit assembly for the acquisition of ligand-binding activity during in vitro synthesis of MPR 46. Up to 21% of MPR 46 synthesized in a reticulocyte lysate supplemented with dog pancreas microsomes acquired ligand-binding activity provided that 1-5 mM glutathione was present during translation and during a chase following translation. Acquisition of ligand-binding activity after cotranslational membrane insertion and core glycosylation depended on formation of intrasubunit disulfide bonds and a conformational change. Formation of intrasubunit disulfide bonds was not sufficient for ligand-binding activity and is likely to precede the conformational change, which resulted in increased resistance toward trypsin, formation of highly antigenic epitopes, and association to dimers, concomitant with the acquisition of ligand-binding activity.     

Cross-linked SecA dimers are not functional in protein translocation

The ATPase SecA is involved in post-translational protein translocation through the SecY channel across the bacterial inner membrane. SecA is a dimer that can dissociate into monomers with translocation activity. Here, we have addressed whether dissociation of the SecA dimer is required for translocation. We show that a dimer in which the two subunits are cross-linked by disulfide bridges is inactive in protein translocation, translocation ATPase, and binding to a lipid bilayer. In contrast, upon reduction of the disulfide bridges, the resulting monomers regain these activities. These data support the notion that dissociation of SecA dimers into monomers occurs during protein translocation.     

TCEP treatment reduces proteolytic activity of BoNT/B in human neuronal SHSY‐5Y cells

The light chain (LC) of botulinum neurotoxin B (BoNT/B) is unable to enter target neuronal cells by itself. It is brought into the cell in association with the BoNT/B heavy chain (HC) through endocytosis. The BoNT HC‐LC subunits are held together by a single disulfide bond. Intracellular reduction of this bond and separation of the two subunits activates the endopeptidase activity of the LC. This requirement suggests a strategy to prevent uptake by prophylactic reduction to disrupt the disulfide bond prior to endocytosis of the complex. We examined the utility of tris‐(2‐carboxyethyl)‐phosphine hydrochloride (TCEP), a relatively non‐toxic, non‐sulfur containing disulfide bond reducing agent that lacks the undesirable properties of mercapto‐containing reducing agents. We found that TCEP was as effective as DTT with maximal LC endopeptidase activation occurring at 1 mM, a concentration not toxic to the human neuronal cell line, SHSY‐5Y. In these cells, 1 mM TCEP maximally protected against BoNT/B inhibition of [³H]‐NA release, achieving 72% of the release from un‐intoxicated controls. This effect appears to be due to the sparing of SNARE proteins as the levels of VAMP‐2, the specific target of BoNT/B, were protected. These results show that TCEP disrupts the structure of BoNT/B by reduction of the LC and HC bridging disulfide bond and prevents neuronal intoxication. Since disulfide bond coupling between toxin subunits is a general motif for many toxins, e.g., ricin, snake venom, and all BoNT serotypes, this suggests that TCEP is a promising means to protect against these toxins by preventing cell penetration. J. Cell. Biochem. 107: 1021–1030, 2009. Published 2009 Wiley‐Liss, Inc.     

The Disulfide Bond,but Not Zinc or Dimerization,Controls Initiation and Seeded Growth in Amyotrophic Lateral Sclerosis-linked Cu,Zn Superoxide Dismutase (SOD1) Fibrillation

Aggregation of copper-zinc superoxide dismutase (SOD1) is a defining feature of familial ALS caused by inherited mutations in the sod1 gene, and misfolded and aggregated forms of wild-type SOD1 are found in both sporadic and familial ALS cases. Mature SOD1 owes its exceptional stability to a number of post-translational modifications as follows: formation of the intramolecular disulfide bond, binding of copper and zinc, and dimerization. Loss of stability due to the failure to acquire one or more of these modifications is proposed to lead to aggregation in vivo. Previously, we showed that the presence of apo-, disulfide-reduced SOD1, the most immature form of SOD1, results in initiation of fibrillation of more mature forms that have an intact Cys-57–Cys-146 disulfide bond and are partially metallated. In this study, we examine the ability of each of the above post-translational modifications to modulate fibril initiation and seeded growth. Cobalt or zinc binding, despite conferring great structural stability, neither inhibits the initiation propensity of disulfide-reduced SOD1 nor consistently protects disulfide-oxidized SOD1 from being recruited into growing fibrils across wild-type and a number of ALS mutants. In contrast, reduction of the disulfide bond, known to be necessary for fibril initiation, also allows for faster recruitment during seeded amyloid growth. These results identify separate factors that differently influence seeded growth and initiation and indicate a lack of correlation between the overall thermodynamic stability of partially mature SOD1 states and their ability to initiate fibrillation or be recruited by a growing fibril.     

The ecto-5'-nucleotidase subunits in dimers are not linked by disulfide bridges but by non-covalent bonds

It has long been considered that ecto-5'-nucleotidase (eNT) dimers consist of subunits linked by disulfide bonds. Hydrophilic (6.7S) and amphiphilic (4.0S) dimers were separated by sedimentation analysis of eNT purified from bull seminal plasma. Hydrophilic (4. 2S) and amphiphilic (2.6S) eNT monomers were obtained after reduction of disulfide bonds in dimers. The amphiphilic eNT dimers or monomers were converted into their hydrophilic variants with phosphatidylinositol-specific phospholipase C. SDS-PAGE plus Western blot showed 68 kDa subunits, regardless of the addition of beta-mercaptoethanol to the SDS mixture. Active eNT monomers were obtained by addition of 1 M guanidinium chloride (Gdn) to dimers, and unfolded subunits by addition of 4 M Gdn. The results unambiguously demonstrate that the subunits in eNT dimers are not linked by disulfide bridges, but by non-covalent bonds, and that dissociation precedes inactivation and unfolding.