Morphological alterations in erythrocytes treated with silver nanoparticles biomineralized by marine sediment-derived Bacillus sp. VITSSN01

Biomineralization-inspired preparation of nanoparticles by marine microorganisms is in the limelight of modern nanotechnology. In recent years, the use of marine microorganisms for the synthesis of nanoparticles has been gaining importance due to the simplicity and eco-friendliness of the approach. Here we describe the synthesis of silver nanoparticles using halotolerant Bacillus sp. isolated from the southern coastal waters of India. Our selective and enriched isolation technique resulted in the isolation of a silver nitrate-resistant novel marine Bacillus sp. isolated from sediments collected at Ennore Port, Chennai, India. The strain was characterized by the polyphasic taxonomic approach, and phenotypic and phylogenetic analysis identified the strain as Bacillus sp. VITSSN01. The resistant strain was further assayed for the synthesis of silver nanoparticles and its biological activity evaluated. Nanoparticles were synthesized under optimized nutritional and cultural conditions with shaking and the production continuously monitored. The nanoparticles thus produced were then characterized by atomic force microscopy, X-ray diffraction, Fourier transform-infrared spectrophotometer and transmission electron microscopy. The mean particle size was 46 nm. Hemotological toxicity of nanoparticles is very severe form and less studied. We therefore checked the synthesized silver nanoparticles for toxicity against erythrocytes and found that the silver nanoparticles exhibited moderate hemolytic activity against human erythrocytes, with a half maximal effective concentration (EC₅₀) value of 60 μg/ml. Microscopic studies of the treated erythrocytes showed slight structural perturbations. The results of our study strongly suggest that marine microorganisms could be a potential source for the rapid and eco-friendly synthesis of nanoparticles.     

Biosynthesis and antibacterial activity of ZnO nanoparticles using Trifolium pratense flower extract

Zinc oxide (ZnO) has broad applications in various areas. Nanoparticle synthesis using plants is an alternative to conventional physical and chemical methods. It is known that the biological synthesis of nanoparticles is gaining importance due to its simplicity, eco-friendliness and extensive antimicrobial activity. Also, in this study we report the synthesis of ZnO nanoparticles using Trifolium pratense flower extract. The prepared ZnO nanoparticles have been characterized by UV–Vis absorption spectroscopy, X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), and scanning electron microscopy (SEM) with Energy dispersive X-ray analysis (EDX). Besides, this study determines the antimicrobial efficacy of the synthesized ZnO nanoparticles against clinical and standard strains of S. aureus and P. aeruginosa and standard strain of E. coli.     

Antimicrobial Activities of Silver Nanoparticles Synthesized by Using Water Extract of Arnicae anthodium

Green synthesis of nanoparticles has gained significant importance in recent years and has become the one of the most preferred methods. Also, green synthesis of nanoparticles is valuable branch of nanotechnology. Plant extracts are eco-friendly and can be an economic option for synthesis of nanoparticles. This study presents method the synthesis of silver nanoparticles using water extract of Arnicae anthodium. Formation of silver nanoparticles was confirmed by UV–visble spectroscopy, Fourier transform infrared spectroscopy and total reflection X-ray fluorescence analysis. The morphology of the synthesized silver nanoparticles was verified by SEM–EDS. The obtained silver nanoparticles were used to study their antimicrobial activity.     

Extracellular synthesis of gold bionanoparticles by <Emphasis Type="Italic">Nocardiopsis</Emphasis> sp. and evaluation of its antimicrobial,antioxidant and cytotoxic activities

Advancement of biological process for the synthesis of bionanoparticles is evolving into a key area of research in nanotechnology. The present study deals with the biosynthesis, characterization of gold bionanoparticles by Nocardiopsis sp. MBRC-48 and evaluation of their antimicrobial, antioxidant and cytotoxic activities. The gold bionanoparticles obtained were characterized by UV–visible spectroscopy, X-ray diffraction analysis, Fourier transform infrared spectroscopy, field emission scanning electron microscopy, energy dispersive X-ray analysis and transmission electron microscopy (TEM). The synthesized gold bionanoparticles were spherical in shape with an average of 11.57 ± 1.24 nm as determined by TEM and dynamic light scattering (DLS) particle size analyzer, respectively. The biosynthesized gold nanoparticles exhibited good antimicrobial activity against pathogenic microorganisms. It showed strong antioxidant activity as well as cytotoxicity against HeLa cervical cancer cell line. The present study demonstrated the potential use of the marine actinobacterial strain of Nocardiopsis sp. MBRC-48 as an important source for gold nanoparticles with improved biomedical applications including antimicrobial, antioxidant as well as cytotoxic agent.     

Synthesis and characterization of zinc oxide nanoparticles by using polyol chemistry for their antimicrobial and antibiofilm activity

The present investigation deals with facile polyol mediated synthesis and characterization of ZnO nanoparticles and their antimicrobial activities against pathogenic microorganisms. The synthesis process was carried out by refluxing zinc acetate precursor in diethylene glycol(DEG) and triethylene glycol(TEG) in the presence and in the absence of sodium acetate for 2 h and 3 h. All synthesized ZnO nanoparticles were characterized by X-ray diffraction (XRD), UV visible spectroscopy (UV), thermogravimetric analysis (TGA), fourier transform infrared spectroscopy (FTIR), field emission scanning electron microscopy(FESEM), transmission electron microscopy (TEM) and energy dispersive X-ray spectroscopy (EDX) technique. All nanoparticles showed different degree of antibacterial and antibiofilm activity against Gram-positive Staphylococcus aureus (NCIM 2654)and Gram-negative Proteus vulgaris (NCIM 2613). The antibacterial and antibiofilm activity was inversely proportional to the size of the synthesized ZnO nanoparticles. Among all prepared particles, ZnO nanoparticles with least size (~ 15 nm) prepared by refluxing zinc acetate dihydrate in diethylene glycol for 3 h exhibited remarkable antibacterial and antibiofilm activity which may serve as potential alternatives in biomedical application.     

A biomimetic approach towards synthesis of zinc oxide nanoparticles

Using natural processes as inspiration, the present study demonstrates a positive correlation between zinc metal tolerance ability of a soil fungus and its potential for the synthesis of zinc oxide (ZnO) nanoparticles. A total of 19 fungal cultures were isolated from the rhizospheric soils of plants naturally growing at a zinc mine area in India and identified on the genus, respectively the species level. Aspergillus aeneus isolate NJP12 has been shown to have a high zinc metal tolerance ability and a potential for extracellular synthesis of ZnO nanoparticles under ambient conditions. UV–visible spectroscopy, Fourier transform infrared spectroscopy, X-ray diffraction analysis, transmission electron microscopy, and energy dispersive spectroscopy studies further confirmed the crystallinity, morphology, and composition of synthesized ZnO nanoparticles. The results revealed the synthesis of spherical nanoparticles coated with protein molecules which served as stabilizing agents. Investigations on the role of fungal extracellular proteins in the synthesis of nanoparticles indicated that the process is nonenzymatic but involves amino acids present in the protein chains.     

Biogenic synthesis of floral-shaped gold nanoparticles using a novel strain,Talaromyces flavus

A biogenic route was adopted towards the synthesis of gold nanoparticles using the extract of a novel strain, Talaromyces flavus. Reduction of chloroauric acid by the fungal extract resulted in the production of gold nanoparticle, which was further confirmed by the concordant results obtained from UV–visible spectroscopy, energy dispersive spectroscopy (EDS), and dynamic light scattering (DLS) analysis. Morphology and the crystal nature of the synthesized nanoparticles were characterized using transmission electron microscopy (TEM), X-ray diffraction (XRD) and selected area electron diffraction (SAED). A direct correlation was observed between nanoparticle formation and the concentration of reducing agent present in the fungal extract. The time-dependent kinetic study revealed that the bioreduction process follows an autocatalytic reaction. Crystalline, irregular, and mostly flower-shaped gold nanoparticles with a mean hydrodynamic radius of 38.54?±?10.34 nm were obtained. pH played a significant role on production of mono-dispersed nanoparticle. FTIR analysis partially deciphered the involvement of –NH₂, ?SH, and –CO groups as the probable molecules in the bio-reduction and stabilization process. Compared to the conventional methods, a time-resolved, green, and economically viable method for floral-shaped nanoparticle synthesis was developed.     

Mycocrystallization of gold ions by the fungus Cylindrocladium floridanum

The size and morphology determines the thermodynamic, physical and electronic properties of metal nanoparticles. The extracellular synthesis of gold nanoparticles by fungus, Cylindrocladium floridanum, which acts as a source of reducing and stabilizing agent has been described. The synthesized nanoparticles were characterized using techniques such as UV–Vis spectroscopy, X-ray diffraction (XRD), scanning electron microscopy, energy dispersive X-ray analysis (EDAX), and high-resolution transmission electron microscopy (HR-TEM). Based on the evidence of HR-TEM, the synthesized particles were found to be spherical with an average size of 19.05 nm. Powder XRD pattern proved the formation of (111)-oriented face-centered cubic crystals of metallic gold. This microbial approach by fungus for the green synthesis of spherical gold nanoparticles has many advantages such as economic viability, scaling up and environment friendliness.     

Influence of strong bases on the synthesis of silver nanoparticles (AgNPs) using the ligninolytic fungi Trametes trogii

Silver nanoparticles (AgNPs) were biosynthesized using fungal extract of Trametes trogii, a white rot basidiomycete involved in wood decay worldwide, which produces several ligninolytic enzymes. According to previous studies using fungi, enzymes are involved in nanoparticles synthesis, through the so-called green synthesis process, acting as reducing and capping agents. Understanding which factors could modify nanoparticles’ shape, size and production efficiency is relevant. The results showed that under the protocol used in this work, this strain of Trametes trogii is able to synthesize silver nanoparticles with the addition of silver nitrate (AgNO₃) to the fungal extract obtained with an optimal incubation time of 72 h and pH 13, using NaOH to adjust pH. The progress of the reaction was monitored using UV–visible spectroscopy and synthesized AgNPs was characterized by scanning electron microscope (SEM), through in-lens and QBDS detectors, and energy-dispersive X-ray spectroscopy (EDX). Additionally, SPR absorption was modeled using Mie theory and simple nanoparticles and core-shell configurations were studied, to understand the morphology and environment of the nanoparticles. This protocol represents a simple and cheap synthesis in the absence of toxic reagents and under an environmentally friendly condition.     

Reactive Oxygen Species Mediated Bacterial Biofilm Inhibition via Zinc Oxide Nanoparticles and Their Statistical Determination

The formation of bacterial biofilm is a major challenge in clinical applications. The main aim of this study is to describe the synthesis, characterization and biocidal potential of zinc oxide nanoparticles (NPs) against bacterial strain Pseudomonas aeruginosa. These nanoparticles were synthesized via soft chemical solution process in a very short time and their structural properties have been investigated in detail by using X-ray diffraction and transmission electron microscopy measurements. In this work, the potential of synthesized ZnO-NPs (∼10–15 nm) has been assessed in-vitro inhibition of bacteria and the formation of their biofilms was observed using the tissue culture plate assays. The crystal violet staining on biofilm formation and its optical density revealed the effect on biofilm inhibition. The NPs at a concentration of 100 µg/mL significantly inhibited the growth of bacteria and biofilm formation. The biofilm inhibition by ZnO-NPs was also confirmed via bio-transmission electron microscopy (Bio-TEM). The Bio-TEM analysis of ZnO-NPs treated bacteria confirmed the deformation and damage of cells. The bacterial growth in presence of NPs concluded the bactericidal ability of NPs in a concentration dependent manner. It has been speculated that the antibacterial activity of NPs as a surface coating material, could be a feasible approach for controlling the pathogens. Additionally, the obtained bacterial solution data is also in agreement with the results from statistical analytical methods.     

Biosynthesis of silver nanoparticles by the endophytic fungus Epicoccum nigrum and their activity against pathogenic fungi

There is an enormous interest in developing safe, cost-effective and environmentally friendly technologies for nano-materials synthesis. In the present study, extracellular biosynthesis of silver nanoparticles was achieved by Epicoccum nigrum, an endophytic fungus isolated from the cambium of Phellodendron amurense. The reduction of the silver ions was monitored by UV–visible spectrophotometry, and the characterization of the Ag NPs was carried out by X-ray diffraction and transmission electron microscopy. The synthesized Ag NPs were exceptionally stable. It was found that an alkaline pH favored the formation of Ag NPs and elevated temperature accelerated the reduction process. Furthermore, the antifungal activity of the Ag NPs was assessed using a microdilution method. The biosynthesized Ag NPs showed considerable activity against the pathogenic fungi. The current research opens a new path for the green synthesis of Ag NPs and the process is easy to scale up for biomedical applications.     

Insights from the molecular characterization of mercury stress proteins identified by proteomics in E.coli nissle 1917

Differently expressed proteins in probiotic Escherichia coli nissle 1917 under mercury stress identified by using a proteomic approach. We applied to separate proteins by using two-dimensional gel electrophoresis and proteins were identified using MALDI-TOF-MS using PMF, by mascot database search using the NCBI database. we identified six proteins after exposure to mercury stress with respect to different functional classes. It is useful to understand the molecular insights into mercury stress in probiotic E. coli. Next we describe a structure generated by homology modelling and functional domain identification; it is interesting to study the impact of stress on protein structures. MS characterization and computational methods together provide the opportunity to examine the impact of stress arising from mercury. The role of these proteins in metal tolerance and structure relation is discussed. To the best of our knowledge, proteomics of E. coli nissle 1917 overview of mercury stress has been reported for the first time.     

Biological synthesis of gold nanocubes from Bacillus licheniformis

Microorganisms play an important role in the eco-friendly synthesis of metal nanoparticles. This study illustrates the synthesis of gold nanocubes using the bacterium Bacillus licheniformis after 48 h of incubation at room temperature. The morphology of the samples was analyzed using scanning electron microscopy (SEM) and the particles formed were characterized to be nanocubes. The size of gold nanocubes in aqueous solution has been calculated using UV–Vis spectroscopy, XRD and SEM measurements. The nanoparticles are found to be polydisperse nanocubes in the size range 10–100 nm.     

Exploitation of marine bacteria for production of gold nanoparticles

Background

Gold nanoparticles (AuNPs) have found wide range of applications in electronics, biomedical engineering, and chemistry owing to their exceptional opto-electrical properties. Biological synthesis of gold nanoparticles by using plant extracts and microbes have received profound interest in recent times owing to their potential to produce nanoparticles with varied shape, size and morphology. Marine microorganisms are unique to tolerate high salt concentration and can evade toxicity of different metal ions. However, these marine microbes are not sufficiently explored for their capability of metal nanoparticle synthesis. Although, marine water is one of the richest sources of gold in the nature, however, there is no significant publication regarding utilization of marine micro-organisms to produce gold nanoparticles. Therefore, there might be a possibility of exploring marine bacteria as nanofactories for AuNP biosynthesis.

Results

In the present study, marine bacteria are exploited towards their capability of gold nanoparticles (AuNPs) production. Stable, monodisperse AuNP formation with around 10?nm dimension occur upon exposure of HAuCl₄ solution to whole cells of a novel strain of Marinobacter pelagius, as characterized by polyphasic taxonomy. Nanoparticles synthesized are characterized by Transmission electron microscopy, Dynamic light scattering and UV-visible spectroscopy.

Conclusion

The potential of marine organisms in biosynthesis of AuNPs are still relatively unexplored. Although, there are few reports of gold nanoparticles production using marine sponges and sea weeds however, there is no report on the production of gold nanoparticles using marine bacteria. The present work highlighted the possibility of using the marine bacterial strain of Marinobacter pelagius to achieve a fast rate of nanoparticles synthesis which may be of high interest for future process development of AuNPs. This is the first report of AuNP synthesis by marine bacteria.     

Novel polyhedral gold nanoparticles: green synthesis,optimization and characterization by environmental isolate of Acinetobacter sp. SW30

Gold nanoparticles have enormous applications in cancer treatment, drug delivery and nanobiosensor due to their biocompatibility. Biological route of synthesis of metal nanoparticles are cost effective and eco-friendly. Acinetobacter sp. SW 30 isolated from activated sewage sludge produced cell bound as well as intracellular gold nanoparticles when challenged with HAuCl₄ salt solution. We first time report the optimization of various physiological parameters such as age of culture, cell density and physicochemical parameters viz HAuCl₄ concentration, temperature and pH which influence the synthesis of gold nanoparticles. Gold nanoparticles thus produced were characterized by various analytical techniques viz. UV–Visible spectroscopy, X-ray diffraction, cyclic voltammetry, transmission electron microscopy, selected area electron diffraction, high resolution transmission electron microscopy, environmental scanning electron microscopy, energy dispersive X-ray spectroscopy, atomic force microscopy and dynamic light scattering. Polyhedral gold nanoparticles of size 20 ± 10 nm were synthesized by 24 h grown culture of cell density 2.4 × 10⁹ cfu/ml at 50 °C and pH 9 in 0.5 mM HAuCl₄. It was found that most of the gold nanoparticles were released into solution from bacterial cell surface of Acinetobacter sp. at pH 9 and 50 °C.     

Development of an eco-friendly approach for biogenesis of silver nanoparticles using spores of Bacillus athrophaeus

The biological synthesis methods have been emerging as a promising new approach for production of nanoparticles due to their simplicity and non-toxicity. In the present study, spores of Bacillus athrophaeus were used to achieve the objective of developing a green synthesis method of silver nanoparticles. Enzyme assay revealed that the spores and their heat inactivated forms (microcapsules) were highly active and their enzymatic contents differed from the vegetative cells. Laccase, glucose oxidase, and alkaline phosphatase activities were detected in the dormant forms, but not in the vegetative cells. Although no nanoparticle was produced by active cells of B. athrophaeus, both spores and microcapsules were efficiently capable of reducing the silver ions (Ag⁺) to elemental silver (Ag⁰) leading to the formation of nanoparticles from silver nitrate (AgNO₃). The presence of biologically synthesized silver nanoparticles was determined by obtaining broad spectra with maximum absorbance at 400 nm in UV–visible spectroscopy. The X-ray diffraction analysis pattern revealed that the nanoscale particles have crystalline nature with various topologies, as confirmed by transmission electron microscopy (TEM). The TEM micrograph showed the nanocrystal structures with dimensions ranging from 5 to 30 nm. Accordingly, the spore mixture could be employed as a factory for detoxification of heavy metals and subsequent production of nanoparticles. This research introduces an environmental friendly and cost effective biotechnological process for the extracellular synthesis of silver nanoparticles using the bacterial spores.     

Nucleotide sequence of Pseudomonas aeruginosa conjugative plasmid pUM505 containing virulence and heavy-metal resistance genes

We determined the complete nucleotide sequence of conjugative plasmid pUM505 isolated from a clinical strain of Pseudomonas aeruginosa. The plasmid had a length of 123,322 bp and contained 138 complete coding regions, including 46% open reading frames encoding hypothetical proteins. pUM505 can be considered a hybrid plasmid because it presents two well-defined regions. The first region corresponded to a larger DNA segment with homology to a pathogenicity island from virulent Pseudomonas strains; this island in pUM505 was comprised of genes probably involved in virulence and genes encoding proteins implicated in replication, maintenance and plasmid transfer. Sequence analysis identified pil genes encoding a type IV secretion system, establishing pUM505 as a member of the family of IncI1 plasmids. Plasmid pUM505 also contained virB4/virD4 homologues, which are linked to virulence in other plasmids. The second region, smaller in length, contains inorganic mercury and chromate resistance gene clusters both flanked by putative mobile elements. Although no genes for antibiotic resistance were identified, when pUM505 was transferred to a recipient strain of P. aeruginosa it conferred resistance to the fluoroquinolone ciprofloxacin. pUM505 also conferred resistance to the superoxide radical generator paraquat. pUM505 could provide Pseudomonas strains with a wide variety of adaptive traits such as virulence, heavy-metal and antibiotic resistance and oxidative stress tolerance which can be selective factors for the distribution and prevalence of this plasmid in diverse environments, including hospitals and heavy metal contaminated soils.     

Synthesis, antifungal activities, and potential detoxification of N-(2,3,4,6-tetra-O-acetyl-β-d-glucopyranosyl)thiocarbamates

A series of N-(2,3,4,6-tetra-O-acetyl-β-d-glucopyranosyl)thiocarbamates were synthesized by the reaction of glucosyl isothiocyanates with monohydric and dihydric alcohols, and acetone oxime, using methods of both normal reaction and microwave-assisted synthesis. Antifungal activities of the title compounds were determined with three kinds of plant pathogenic fungi, Fusarium graminearum, Rhizoctoria cerealis, and Colletotrichum orbiculare. The synthesized glucosyl thiocarbamates easily reacted with HgCl₂ to give novel metal-organic compounds, bis[O-alkyl N-(2,3,4,6-tetra-O-acetyl-β-d-glucopyranosyl)thiocarbamato]mercury, in yields of 80%. This strong affinity of thiocarbamates for mercury showed their potential utility in medical or marine environmental detoxification.     

In vivo synthesis of nano-selenium by Tetrahymena thermophila SB210

Nano-selenium has a great potential to be used in chemical, biological, medical and environmental fields. Biological methods for nano-selenium synthesis have attracted wide interests, because they can be operated at ambient temperature and pressure without complicated equipments. In this work, a protozoa, Tetrahymena thermophila (T. thermophila) SB210, was used to in vivo synthesize nano-selenium. The biosynthesized nano-selenium was characterized using transmission electron microscopy, energy dispersive X-ray spectroscopy and Raman spectroscopy. The synthesized amorphous spherical selenium nanoparticles had diameters of 50–500 nm with the coexistence of irregular nano-selenium. The expressions of glutathione (GSH) synthesis related gene glutathione synthase, cysteine-rich protein metallothionein related gene metallothionein-1 and [2Fe-2S] cluster-binding protein related gene were up-regulated in the nano-selenium producing group. Also, the subsequent GSH detection and in vitro synthesis experimental results suggest the three proteins were likely to be involved in the nano-selenium synthesis process.     

Extracellular biosynthesis of iron oxide nanoparticles by Bacillus subtilis strains isolated from rhizosphere soil

The biological synthesis of nanoparticles is emerging as a potential method for nanoparticle synthesis due to its non-toxicity and simplicity. We report the ability of Bacillus subtilis strains isolated from rhizosphere soil to produce iron oxide nanoparticles. B. subtilis strains having the potential for the extracellular biosynthesis of Fe₃O₄nanoparticles were isolated from rhizosphere soil, identified and characterized. A bactericidal protein subtilin was isolated from all the isolates of B. subtilis, which is a characteristic for the species. The isolated subtilin was tested against the bacterial strain, E. coli. The supernatant of the bacterial culture was used for the synthesis of Fe₃O₄ nanoparticles. The formation of nanoparticles was assessed by using UV-Visible spectrophotometer. FTIR and SEM analysis were used in order to confirm the formation and size of the nanoparticles. Further, the effect of incubation time, pH, and temperature on the formation of Fe₃O₄ nanoparticles was studied. The successful synthesis of stabilized Fe₃O₄ nanoparticles, which was capped by the organic group, indicates the applicability of the isolated B. subtilis strain for the bulk synthesis of iron oxide nanoparticles.