秦川牛脂联素基因SNPs检测及其与胴体、肉质性状的相关性

利用PCR-SSCP结合测序技术对405头24月龄秦川牛脂联素基因SNPs位点进行检测, 运用SPSS统计程序中的GLM模型将检测到的SNPs位点与部分胴体及肉质性状的相关性进行了分析。结果检测到AA、AB、BB、CC、CD 5种基因型, 其中AB、BB型个体在脂联素基因第2外显子 64 bp处发现G→C突变, CD型个体第3外显子50 bp处发现C→T的突变, G→C导致谷氨酸(GGA)转化为谷氨酰胺(GCA), C→T导致丝氨酸(TCA)转化为亮氨酸(TTA)。方差分析结果表明: AA型个体的宰前活重、胴体重、眼肌面积显著高于BB型(P<0.05), 而在胴体腿臀围方面, AA型个体极显著高于AB型、BB型个体(P<0.01)。CD型个体的宰前活重、胴体腿臀围、皮下脂肪厚、背膘厚、嫩度都显著优于CC型个体(P<0.05)。脂联素基因该位点可能是影响秦川牛胴体及肉质性状的主效QTL或与之紧密连锁, 可作为秦川牛高档牛肉生产的候选分子标记。     

Effect of genetic variation of CEBPA gene on body measurement and carcass traits of Qinchuan cattle

In our study, genetic variation in coding region of cattle CCAAT enhancer binding protein alpha(namely CEBPA)gene was detected by PCR-RFLP and DNA sequencing methods in 215 individuals from Qinchuan cattle breed. Two haplotypes (A and B) and three observed genotypes (AA, AB, and BB) were detected. The result of DNA sequence showed one mutation by comparisons with NC_007316. The mutation at nt963 (T>G) were located in coding region of the CEBPA gene. Associations between the CEBPA gene genetic variation and the carcass traits were revealed in Qinchuan cattle. Least squares analysis revealed a significant statistical effect of the CEBPA gene different genotypes on slaughter weight and carcass weight in Qinchuan cattle. Individuals with BB genotype showed higher slaughter weight and carcass weight than individuals with AA and AB genotypes. Therefore, these results suggest that the CEBPA gene is a strong candidate gene that affects carcass traits in Qinchuan cattle.     

IGFBP3基因多态性与秦川牛部分屠宰性状的相关性 Polymorphisms of Insulin-like Growth Factor Binding Protein 3 Gene and Its Associations with Several Carcass Traits in Qinchuan Cattle

以IGFBP3基因作为秦川牛（Bos taurus）部分屠宰指标的侯选基因,在对60头秦川牛的IGFBP3基因进行PCR-RFLP和序列分析的基础上,对秦川牛群体中IGFBP3基因座等位基因和基因型频率的分布及其与秦川牛部分屠宰性状的关系进行了分析。结果发现,在秦川牛群体中,651 bp的PCR 产物经过限制性内切酶HaeIII消化后,表现出3种基因型,其中等位基因A、B及3种基因型AA、AB、BB的频率分别为0.84、0.16和070、0.28、0.02。经序列分析发现,第299位的C→A颠换（GGCC变成了GGAC）导致了1个HaeIII限制性酶切位点的丢失而产生了该基因座多态性。在所研究的群体中,该多态基因座处于Hardy-Weinberg平衡状态（P＞005）。对13头24月龄秦川牛进行屠宰分析,发现不同基因型对秦川牛部分屠宰指标有一定影响,AA、AB及BB型个体的屠宰率、净肉率及西冷、牛柳、眼肉和嫩肩肉的产率逐渐降低,但差异不显著（P＞0.05）;AA型个体的眼肌面积大于BB型个体（P＜0.05）,AB型和BB型个体胴体脂肪含量高于AA型个体（P＜0.01）。 Abstract:DNA samples from 60 Qinchuan cattle (Bos taurus) were analyzed with PCR-RFLPs and sequencing for insulin-like growth factor binding protein 3 (IGFBP3) gene.Fragments of 651 bp were amplified with two primers and the products of PCR were digested with restriction endonuclease HaeIII.The produced fragments showed three genotypes,namely AA,AB and BB after electrophoresis.Frequencies of the genotype AA,AB,BB and allele A,B were 0.7,0.28,0.02,and 0.84,0.16,respectively.Sequence analysis showed that a transversion of C→A at 299 nt resulted in loss of the cleaved site of restriction endonuclease HaeIII and produced this polymorphism.This polymorphic locus of IGFBP3 gene was at Hardy-Weinberg equilibrium (P＞0.05).The genotypes of AA,AB,BB slightly affected several slaughter and carcass traits of Qinchuan cattle.Dressing percentage,net meat percentage,striplion percentage,tenderloin percentage,ribeye percentage and tender shoulder percentage were decreased with the genotypes of AA,AB and BB in Qinchuan cattle,but it was not significant (P＞0.05).Average ribeye area in individuals of AA genotype was significantly higher than that in individuals of BB genotype (P＜0.05),and beef fat content in individuals of genotype AB and BB was significantly higher than that in individuals of AA genotype (P＜0.01).     

Expression analysis, single nucleotide polymorphisms and combined genotypes in candidate genes and their associations with growth and carcass traits in Qinchuan cattle

The apolipoprotein E (ApoE) gene is an important component of plasma lipoprotein, and Fas apoptosis inhibitory molecule (FAIM) is a novel anti-apoptotic gene. In this study, we researched and discussed seven genes in eight different tissues in Qinchuan cattle by quantitative Real-time PCR. The result of analysis showed that ApoE and FAIM ₂ genes had a correlation with muscle and fat. PCR–RFLP was applied to analyze the genetic variations of the ApoE and FAIM ₂ genes and verify the effect on growth and carcass traits in a total of 365 Qinchuan cattles. The result of haplotype analysis showed that nine different haplotypes were identified among the four SNPs in ApoE and FAIM ₂ genes. The statistical analyses indicated that the four SNPs were significant association with growth and carcass traits (P < 0.05, N = 365); and the four SNPs were significant association between nine combined genotypes of candidate genes and growth and carcass traits. Taken together, our results provide the evidence that polymorphisms in candidate genes are associated with growth and carcass traits in Qinchuan cattle, and may be used as a possible candidate for marker-assisted selection and management in beef cattle breeding program.     

Genetic diversity of MYH 3 gene associated with growth and carcass traits in Chinese Qinchuan cattle

MYH₃, whose function is to convert chemical energy to mechanical energy through ATP hydrolysis, is mainly expressed in skeletal muscle at various stages and is indispensable in the procedure of development of skeletal muscle and heart. In the study, genetic variations and genotypes of MYH ₃ gene in a total of 365 Qinchuan cattles were analyzed by polymerase chain reaction-restriction fragment length polymorphism, as well as verified the effect on growth and carcass traits. After PCR products were digested by restriction enzymes, eight SNPs were identified and individuals were genotyped. It showed that the SNPs at nucleotides were all in low linkage disequilibrium, therefore no dominated haplotype was found in the population. The result of statistic analysis indicated seven SNPs were significantly associated with growth and carcass traits (P < 0.05, N = 365) except locus G13791A. To sum up, the result of the study proved that polymorphisms in MYH3 gene are associated with the growth performance of Chinese Qinchuan cattle, so the variations of the gene could be used as possible molecular assisted-makers in the beef cattle breeding program and management.     

Polymorphism of <Emphasis Type="Italic">DLK1</Emphasis> and <Emphasis Type="Italic">CLPG</Emphasis> gene and their association with phenotypic traits in Chinese cattle

DLK1 and CLPG were located in DLK1-GTL2 imprinted cluster. They all affected muscle growth and meat tenderness. The functional importance of DLK1 and CLPG imply that the variation of the genes could affect the growth traits of animal. PCR-SSCP and sequencing were used to analyze the four loci of DLK1 gene and CLPG gene in 1109 individuals, which belong to eight breeds/species of bovidae, including cattle, buffalo and yak. A synonymous mutation (C451T) was detected in exon 5 of DLK1 in Qinchuan cattle, but didn’t change significantly with phenotypic traits. Three genotypes AA, AB and AC of CLPG were identified in Jiaxian cattle. The associations analyst of different genotypes showed that the individuals with genotypes AA and AC had a greater body weight and longer body length than those with genotype AB (P < 0.05 and P < 0.01, respectively); the AA individuals were different from those AB (P < 0.05) in the circumference of cannon bone. No polymorphism was observed in the other populations at other loci. These results were in agreement with the homology analysis: DLK1 and CLPG genes were in a highly conserved.     

秦川牛IGF2基因SNPs检测及其与胴体、肉质性状的相关性

采用PCR-SSCP方法对186头24月龄秦川牛IGF2基因进行了SNPs多态性检测, 并将其与部分胴体和肉质性状进行关联分析。在IGF2基因120碱基处发现C→T 突变, 在279碱基处发现 A→G 突变。方差分析结果表明: BB、DD 两个位点与胴体性状中与宰前活重、胴体重、胴体长、胴体胸深、眼肌面积显著相关(P<0.05), 其中背部皮下脂肪厚达到差异极显著(P<0.01); 与肉质性状大理石花纹、嫩度、pH24 (牛肉排酸24 h后的酸度值)显著相关(P<0.05)。但是在胴体深、系水力指标中差异不显著(P>0.05)。A、D 等位基因是群体中的优势等位基因, AA、DD 基因型是优势基因型, 而含有B、D 等位基因的个体的胴体和肉质性状优于其他个体, 尤其有着极强脂肪沉积能力     

Polymorphism of follicle stimulating hormone beta (FSHβ) subunit gene and its association with litter traits in giant panda

The different SSCP patterns of the follicle stimulating hormone beta (FSHβ) gene amplified by three pairs of primers were sequenced. Comparisons among the three nucleotide sequences of three genotypes indicated that three base substitutions (A213T, A91G, and A89C) were detected in FSHβ gene, which A213T substitution led to one amino acids mutation (Lys > Met), and the other two substitutions were synonymous mutations. The AA, AB and BB genotypes patterns obtained by FSHβ primer1 had evident relation with the litter traits, but the SSCP genotypes patterns obtained by FSHβ primer2 and primer3 had no evident relation with the litter traits in giant panda. The giant panda with AA and AB genotype had the largest litter size and multiparity rate compared with the BB genotypes (P < 0.05). We speculated that the giant pandas with the A allele have better litter traits than those with the B allele.     

Effects of single and combined genotypes of MC4R and POU1F1 genes on two production traits in Langshan chicken

The objective of this study was to analyze the effects of single and combined genotypes of MC4R and POU1F1 genes in Chinese well-known indigenous chicken (Langshan chicken) population. Genetic variants within MC4R gene and POU1F1 gene were screened through PCR-SSCP and DNA sequencing methods. A C/T mutation at nt 944 in MC4R gene (NC_006089.2:g. 944C>T) and a G/A mutation at nt 3109 in POU1F1 gene (NC_006088.2:g. 3109 G>A) were identified. Associations between the mutations of the two genes with two production traits were analyzed. The results showed that, at MC4R locus, individuals with BB and AB genotypes had highly significantly higher body weight at 16 weeks (p < 0.01) than did those with the AA genotype. And, individuals within AA and AB genotypes had significantly higher egg numbers at 300 days (p < 0.05). At POU1F1 locus, individuals with CD genotype had higher body weight at 16 weeks and egg numbers at 300 days (p < 0.05). Furthermore, combined genotypes from these two loci were found to be associated with egg numbers at 300 days (p < 0.05). The individuals within combined genotype AB/CD had higher egg production. Therefore, variations identified within the MC4R and POU1F1genes are suitable for future use in identifying chickens with the genetic potential of higher body weight and reproductive traits, at least in the population of Langshan chickens.     

Genetic Variant of MYLK4 Gene and its Association with Growth Traits in Chinese Cattle

As a member of MYLK family, MYLK4 gene may play a vital role in muscle development. In this study, one novel single-nucleotide polymorphism (SNP) was identified the bovine MYLK4 by sequencing pooled DNA samples (pool-Seq) and forced polymerase chain reaction-restriction fragment length polymorphism (forced PCR-RFLP) methods. Overall, we reported one mutation (SNP1) in the intron 10 region within the bovine MYLK4 gene in 559 individuals representing five main cattle breeds from China (Nanyang, NY; Qinchuan; Jiaxian, JX; Pinan cattle; and Caidamu cattle, CDM). Genotype AA and allele A were predominant in the QC, PN, and XN populations. Association analysis with growth traits in the QC breed showed that the animals with genotype GG had significantly greater chest breadth and hip width (P?<?0.05). Meanwhile, the genotype GG was strongly associated with withers height and body length than those with genotype AA (P?<?0.01 or P?<?0.05) at 12 months in the NY breed. These statistical results exhibited that the MYLK4 gene might be a potential candidate gene to improve cattle’s growth traits, and the SNP could be used as molecular markers in early marker-assisted selection (MAS) in beef cattle breeding program.     

MyoD基因对肉牛胴体性状影响的分析

用PCR技术克隆到MyoD基因的第二内含子, 采用PCR-SSCP方法研究了3个黄牛品种(鲁西牛、晋喃牛、秦川牛)及4个杂交肉牛(夏洛莱×鲁西牛、安格斯×鲁西牛、利木赞×鲁西牛、西门塔尔×鲁西牛)群体MyoD基因的多态性, 并分析了基因位点多态性与肉牛肉质性状的相关性。实验结果,在国内首次扩增出肉牛MyoD基因的第二内含子的全部序列, 共261 bp。用SSCP方法检测到MyoD基因内含子2有A和B两个等位基因。测序结果表明该座位的多态性是由于内含子二39 bp处C-T的突变和112 bp处C→G的突变造成的。等位基因B在中国地方品种的分布频率高于引进品种的杂交牛群体。c2检验的结果表明, 在该位点的除夏洛莱和安格斯杂交牛外, 其余五个群体(晋南、鲁西、秦川、西门塔尔杂交牛和利木赞杂交牛)均处于Hardy-Weinberg不平衡状态(P>0.05)。实验群体不同基因型与肉牛的宰前活重、胴体重、净肉重、高档肉重、眼肌面积等性状的影响差异极显著或显著(P<0.01或P<0.05), 并且AA型个体均高于AB型个体。     

Identification of novel single nucleotide polymorphisms (SNPs) of the lipoprotein lipase (LPL) gene associated with fatty acid composition in Korean cattle

The lipoprotein lipase (LPL) gene can be considered a functional candidate gene that regulates fatty acid composition. In this study, genetic associations between fatty acid composition and exonic single nucleotide polymorphisms (SNPs) in the LPL gene were examined using 612 Korean cattle. We investigated the relationship between unsaturated fatty acids and five novel SNPs (c.322G>A, c.329A>T, c.527T>G, c.988C>T and c.1591G>A), and confirmed that three polymorphic SNPs (c.322G>A, c.329A>T and c.1591G>A) were associated with fatty acid composition. Korean cattle with an AA genotype of c.322G>A, c.329A>T, and GA genotype of c.1591G>A had higher levels of monounsaturated fatty acids and carcass traits (P < 0.05). Our findings confirmed that three novel SNPs we identified in the LPL gene can affect fatty acid composition and carcass traits. Therefore, selection for AA and GA genotypes should be recommended to genetically improve beef quality and flavor.     

A large indel mutation of the bovine ADD1/SREBP1c gene and its effects on growth traits in some native cattle breeds from China

Adipocyte determination and differentiation-dependent factor 1/sterol regulatory element-binding protein-1c (ADD1/SREBP1c) is a major determinant of tissue differential lipogenic capacity in mammalian and avian species. The objectives of the present study were to focus on insertion-deletion polymorphism (indel) in the bovine ADD1/SREBP1c gene, and analyzing its effect on growth traits in a sample of 1035 cattle belonging to four Chinese cattle breeds. PCR-SSCP, DNA sequencing and agarose electrophoresis methods were used. The 778 bp PCR products of ADD1/SREBP1c gene exhibited three genotypes and two alleles were revealed: W and D. Frequencies of the W allele varied from 0.8651 to 1.000. The associations of the 84 bp indel mutation of ADD1/SREBP1c gene with growth traits of 265 Nanyang cows were analyzed. The animals with genotype WD had significantly higher birth weight, body weight, average daily gain than those with genotype WW at birth, 6-, 12-, 18-, and 24-month old (P < 0.05 or P < 0.01). These results suggest that the indel mutation of bovine ADD1/SREBP1c gene may influence the growth traits in cattle.     

Three Novel SNPs in the Coding Region of the Bovine MC3R Gene and Their Associations with Growth Traits

The involvement of melanocortin-3 receptor (MC3R) is well recognized in the regulation of feeding efficiency, body weight, and energy homeostasis. The objective of this study was to investigate the associations between MC3R gene polymorphisms and growth traits. Three novel SNPs (c.24C→T, c.220T→A, c.734G→C) and five haplotypes were identified in 234 Xiangxi cattle. The associations between MC3R gene polymorphisms and growth traits indicated that the individuals with TT and AT genotypes maintained higher body weight than those with the AA genotype at the c.220T→A locus (P < 0.05). The animals with GG and CG genotypes had higher heart girth and body weight than those with the CC genotype at c.734G→C (P < 0.05). The animals with H3H3 and H2H3 haplotype combinations had higher body weight than those with other haplotype combinations (P < 0.05). The results suggest that these SNPs in the MC3R gene might be useful genetic markers for marker-assisted selection and cattle breeding.     

Ovine insulin induced-gene-2: molecular characterization,polymorphisms and association with milk traits

The aim was to characterize the INSIG-2 gene in Sarda sheep and to highlight associations between polymorphisms and milk traits. Two-hundred ewes, in their third or fourth lactation who lambed a single lamb between 20th and 30th of November, were chosen. Monthly individual milk yield was recorded and from each ewe a sample of milk was taken to analyze fat and protein content. PCR–RFLP and DNA sequencing were carried out to detect polymorphisms. Five exons have been characterized and five mutations have been found G88A, 436TCAGdel, A471G, C1071T and T1737G all in the intronic regions. The ovine sequence and related variations were deposited in GenBank with accession number JX843812.1. The animals carrying AA genotype at position 88 showed a lower milk fat concentration than those with the AG or GG genotype (P < 0.05). A lower milk fat concentration was registered also in the animals with the TCAG deletion in position 436 (P < 0.05) and in the animals carrying AA genotype at position 471 compared to those with the AG or GG genotype (P < 0.05). Moreover, the animals carrying CC genotype at position 1071 had a greater milk yield than those with CT or TT genotype (P < 0.05) while ewes with TT genotype showed a higher milk protein concentration compared to the others (P < 0.05). A total of 11 haplotypes were detected but no significant associations with milk traits were found. In conclusion for the first time the complete coding sequence of INSIG-2 gene and its association with milk trait has been reported in this study.     

Novel 35-bp insertion in Visfatin Gene in Chinese cattle

Visfatin is a protein that is preferentially produced in visceral adipose tissue. Both its tissue expression and secreted plasma levels increase in parallel with obesity. Therefore, the present study is focused on detecting insertion in bovine visfatin gene and analyzing its effect on growth traits in four Chinese cattle breeds (Nangyang, Qinchuan, Jiaxian, and Chinese Holstein) using PCR-SSCP, DNA sequencing and agarose electrophoresis methods. For the first time, a 35-bp insertion was described in the gene and two alleles were revealed: W and I. The x ²-test analysis demonstrated that all breeds were in agreement with Hardy-Weinberg equilibrium (P > 0.05). The associations of the novel 35 bp-insertion of visfatin gene with growth traits of Nanyang cattle at 6, 12, 18, and 24 months old were analyzed: 6 month-old cows with genotype WW had greater birth weight than cows with genotype II and WI (P < 0.01 or P < 0.05). These results suggest that the presence of 35 bpinsertion in visfatin gene may influence the birth weight and bodyweight in 6 month-old cows.     

Relationships Between Single Nucleotide Polymorphisms of the H-FABP Gene and Slaughter and Meat Quality Traits in Chicken

Using PCR-SSCP with five primer pairs, we detected six single nucleotide polymorphisms of the H-FABP gene: 332G → A, 534G → A, 783C → T, 835C → T, 1198T → C, and 2329C → T. Chi-square results showed significant differences (P < 0.05) in genotype frequency among breeds in Fragment 1 and extremely significant differences (P < 0.01) in Fragments 2–4. We found a significant association between Fragment 2 genotype and muscle fiber number, Arg and Thr (P < 0.05); between Fragment 3 genotype and living weight, carcass weight, breast muscle weight, abdominal fat weight, and abdominal fat percentage (P < 0.05); between Fragment 4 genotype and Thr, Phe, and inosinic acid (P < 0.05). It was concluded that H-FABP was the major gene influencing slaughter performance and meat quality or was linked with the major gene in these strains and that the C783T mutation could be used as a candidate molecular genetic marker for breeding selection. The combination M1C2–B2B2–D1D1 is an ideal model for breeding in these strains because it can improve slaughter and meat quality traits.     

Novel SNPs in the bovine ADIPOQ and PPARGC1A genes are associated with carcass traits in Hanwoo (Korean cattle)

Adiponectin (ADIPOQ) modulates several biological processes including energy homeostasis, glucose and lipid metabolism. The bovine ADIPOQ gene was located near the QTL affecting marbling, ribeye muscle area and fat thickness on BTA1. The gene encoding peroxisome proliferator-activated receptor-γ coactivator-1α (PPARGC1A) was located within the QTL region of the traits on BTA6. Moreover, its protein product has various biological functions such as cellular energy homeostasis, including adaptive thermogenesis, adipogenesis and gluconeogenesis. Therefore, the ADIPOQ and PPARGC1A genes are a positional and functional candidate gene for carcass traits in beef cattle. The objectives of this study were to identify polymorphisms in the bovine ADIPOQ and PPARGC1A genes, to evaluate their associations with carcass traits in Hanwoo (Korean cattle) population. We identified nine SNPs in the ADIPOQ gene. Two SNPs (DQ156119: g.1436T > C and DQ156119: g.1454A > G) in the promoter region were recognized as new SNPs identified in Hanwoo. Association analysis indicated that the g.1454A > G SNP genotype was significantly associated with effects on LMA (P = 0.004) and BF (P = 0.021). The ADIPOQ haplotype was also found to have significant effect on the LMA. In the PPARGC1A gene, we identified 11 SNPs in the two unexplored regions (intron 3 and 5). Among them, seven SNPs were located in intron 3 and four SNPs were located in intron 5. Of these 11 putative novel SNPs, two SNPs (AY839822: g.292C > T and AY839823: g.1064C > T) with minor allele frequency (MAF) > 0.20 were examined for associations with carcass traits. The association analysis revealed that both SNPs in PPARGC1A gene were significantly associated with LMA (P < 0.05). These findings suggest that the SNPs of bovine ADIPOQ and PPARGC1A genes may be a useful molecular marker for selection of carcass traits in Hanwoo.     

Polymorphism of bovine Y-STR UMN0929 and its correlation with carcass traits in five Chinese beef cattle populations

The correlations between Y chromosome polymorphisms and the carcass traits were studied in five Chinese beef cattle populations by PCR, single strand conformation polymorphism and Y-STR sequence analysis. Nine alleles and their frequencies were identified on Y-STR UMN0929 region in Qinchuan (n = 116), Luxi (n = 112), Jinnan (n = 104) pure breeds, Simmental × Qinchuan crossbred (n = 80) and Angus × Qinchuan crossbred (n = 96). The most popular A-176 and B-178 alleles were presented in all 5 cattle populations in the range of 12% (Jinnan) to 66% (Simmental × Qinchuan). The allele I-194 presented Luxi and Angus × Qinchuan. In Qinchun cattle, G-190 and E-186 alleles had bigger effect on BPI (4.23 ± 0.32 and 4.22 ± 0.48 kg/cm, P < 0.01) and CW (325.40 ± 49.42 and 316.73 ± 45.29 kg, P < 0.01), respectively. In Luxi cattle, I-194 allele affected higher BPI (4.08 ± 0.35 kg/cm, P < 0.01) and CW (302.07 ± 17.55 kg, P < 0.01), respectively. In Jinnan cattle breed, H-192 had higher BPI (4.32 ± 0.50 kg/cm, P < 0.05) and CW (327.87 ± 59.37 kg, P < 0.05), respectively. In Simmental × Qinchuan cross breed, C-180 allele affected largely on BPI (5.16 ± 0.25 kg/cm, P < 0.05) and CW (393.16 ± 25.92 kg, P < 0.05). In Angus × Qinchuan cross breed, I-194 had higher BPI (4.43 ± 0.33 kg, P < 0.05) and CW (346.63 ± 29.77 kg, P < 0.05). Correlations between alleles and other carcass traits (net meat weight, top grade weight, slaughter rate, net meat rate, loin-eye muscle area, carcass length, meet tenderness and shear force) were also analyzed using mixed-effect model. Cattle Y-STR UMN0929 loci alleles and its correlation with carcass traits in beef cattle populations could be implemented into the cattle breeding program for choosing beef cattle with better carcass traits.     

Genetic Polymorphisms of the CACNA2D1 Gene and Their Association with Carcass and Meat Quality Traits in Cattle

The objective of this study was to identify genetic polymorphisms of the CACNA2D1 gene and to analyze associations between SNPs and carcass and meat quality traits in cattle. Through PCR-RFLP and DNA sequencing methods, a new allelic variant corresponding to the A → G mutation (aspartic to glycine amino acid replacement) of the bovine CACNA2D1 gene was detected. Two alleles and three genotypes (AA, AG, and GG) were defined. Genetic character indicated that the A526745G locus showed moderate polymorphism and was in Hardy–Weinberg equilibrium. Gene-specific SNP marker association analysis showed that the A526745G mutant was significantly associated with carcass weight, dressing percentage, meat percentage, and backfat thickness. The results add new evidence that CACNA2D1 is an important candidate gene for the selection of carcass and meat quality traits in the cattle industry.