NMR imaging of the diffusion of water at 310 K into semi-IPNs of PEM and poly(HEMA-co-THFMA) with and without chlorhexidine diacetate

Magnetic resonance imaging has been used to monitor the diffusion of water at 310 K into a series of semi-IPNs of poly(ethyl methacrylate), PEM, and copolymers of 2-hydroxyethyl methacrylate, HEMA, and tetrahydrofurfuryl methacrylate, THFMA. The diffusion was found to be well described by a Fickian kinetic model in the early stages of the water sorption process, and the diffusion coefficients were found to be slightly smaller than those for the copolymers of HEMA and THFMA, P(HEMA-co-THFMA), containing the same mole fraction of HEMA in the matrix. A second stage sorption process was identified in the later stage of water sorption by the PEM/PTHFMA semi-IPN and for the systems containing a P(HEMA-co-THFMA) component with a mole fraction HEMA of 0.6 or less. This was characterized by the presence of water near the surface of the cylinders with a longer NMR T(2) relaxation time, which would be characteristic of mobile water, such as water present in large pores or surface fissures. The presence of the drug chlorhexidine in the polymer matrixes at a concentration of 5.625 wt % was found not to modify the properties significantly, but the diffusion coefficients for the water sorption were systematically smaller when the drug was present.     

PFG-NMR measurements of the self-diffusion coefficients of water in equilibrium poly(HEMA-co-THFMA) hydrogels

The self-diffusion coefficients for water in a series of copolymers of 2-hydroxyethyl methacrylate, HEMA, and tetrahydrofurfuryl methacrylate, THFMA, swollen with water to their equilibrium states have been studied at 310 K using PFG-NMR. The self-diffusion coefficients calculated from the Stejskal-Tanner equation, D(obs), for all of the hydrated polymers were found to be dependent on the NMR storage time, as a result of spin exchange between the proton reservoirs of the water and the polymers, reaching an equilibrium plateau value at long storage times. The true values of the diffusion coefficients were calculated from the values of D(obs) in the plateau regions by applying a correction for the fraction of water protons present, obtained from the equilibrium water contents of the gels. The true self-diffusion coefficient for water in polyHEMA obtained at 310 K by this method was 5.5 x 10(-10) m(2)s-1. For the copolymers containing 20% HEMA or more a single value of the self-diffusion coefficient was found, which was somewhat larger than the corresponding values obtained for the macroscopic diffusion coefficient from sorption measurements. For polyTHFMA and copolymers containing less than 20% HEMA, the PFG-NMR stimulated echo attenuation decay curves and the log-attenuation plots were characteristic of the presence of two diffusing water species. The self-diffusion coefficients of water in the equilibrium-hydrated copolymers were found to be dependent on the copolymer composition, decreasing with increasing THFMA content.     

IPNs based on chitosan with NVP and NVP/HEMA synthesised through photoinitiator-free photopolymerisation technique for biomedical applications

Biocompatible interpenetration polymeric network (IPN) hydrogels based on chitosan with N-vinylpyrrolidinone (NVP) as well as its copolymer with 2-hydroxymethyl methacrylate (HEMA) were synthesised using the photopolymerisation technique without the inclusion of any photoinitiator or crosslinking agent. These hydrogels were characterised using the Fourier-transform infrared spectroscopy (FTIR) technique. Equilibrium swelling of these hydrogels was performed in Milli-Q water and drug release studies were carried out using theophylline as the model drug. These tests showed that the IPN comprised of chitosan and NVP with a very small amount of N-hydroxymethyl maleimide (HMMI) included exhibited higher swelling abilities and fast drug release rates than the IPN which contained chitosan, NVP and HEMA. Kinetic studies of water diffusion into these hydrogels and drug release revealed that with the exception of the IPN with HEMA incorporated, the other hydrogels did not adhere to the Fickian diffusion model. These hydrogels were tested for their biocompatibility with human epidermal keratinocyte cells (HaCaT). A positive cell growth as evidenced by the 3-[4,5-dimethylthiazol-2-yl]-2,5-diphenyl tetrazolium bromide (MTT) cell proliferation assay indicated that these hydrogels are non-toxic to human keratinocytes and can be potentially used as biomaterials for biomedical applications.     

NMR imaging of the diffusion of water at 37 degrees C into Poly(2-hydroxyethyl methacrylate) containing aspirin or vitamin B(12)

The ingress of water into poly(2-hydroxyethyl methacrylate), PHEMA, loaded with either one of two model drugs, vitamin B(12) or aspirin, was studied at 37 degrees C using three-dimensional NMR imaging. PHEMA was loaded with 5 and 10 wt % of the drugs. From the imaging profiles, it was observed that incorporation of vitamin B(12) into PHEMA resulted in enhanced crack formation on sorption of water and the crack healing behind the diffusion front was slower than for PHEMA without added drug. This was accounted for by the anti-plasticization of PHEMA by vitamin B(12). Crack formation was inhibited in the PHEMA-aspirin systems because of the plasticizing effect of the aspirin on the PHEMA matrix. All of the polymers were found to absorb water according to an underlying Fickian diffusion mechanism. For PHEMA loaded with 5 wt % of aspirin or vitamin B(12), the best values of the water diffusion coefficients were both found to be 1.3 +/- 0.1 x 10(-11) m(2) s(-1) at 37 degrees C, while the values for the polymer loaded with 10 wt % of the drugs were slightly higher, 1.5 +/- 0.1 x 10(-11) m(2) s(-1).     

Release characteristics of novel pH-sensitive p(HEMA-DMAEMA) hydrogels containing 3-(trimethoxy-silyl) propyl methacrylate

An amphiphilic hydrogel of poly(2-hydroxyethyl methacrylate) cross-linked with tetraethyleneglycol diacrylate (TEGDA) was synthesized to contain the hydrophobic monomer 3-(trimethoxy-silyl) propyl methacrylate (PMA) and the pH-responsive, hydrophilic monomer N',N'-dimethylaminoethyl methacrylate (DMAEMA). The gels were separately loaded with two biomolecular probes, insulin and protamine, via both physical entrapment and equilibrium imbibition methods. The release profiles for these biomolecular probes, possessing similar MW (5.7 and 4-6 kDa, respectively) but different pI's (5.3 and 10.0, respectively), were investigated with respect to variation in the pH of the bathing medium as well as the DMAEMA content, and the cross-link density of the hydrogel. Gels exhibited classical Fickian diffusion release profiles. For a typical gel composition 66:15:10:09 mol % (HEMA:DMAEMA:PMA:TEGDA), as the pH of the release media decreased from 7.3 to 4.0, the rate of release of both biomolecular probes increased. When loaded via entrapment, the insulin release rate increased ca. 4-fold (1.0-3.7 x 10(-7) cm(2) s(-1)), whereas that of protamine increased 10-fold (0.3-3.3 x 10(-7) cm(2) s(-1)). When loaded by imbibition, the insulin diffusion coefficient increased 2-fold (3.8-7.2 x 10(-7) cm(2) s(-1)), whereas that of protamine increased 3-fold (1.9-5.5 x 10(-7) cm(2) s(-1)). The reduction of pH, through its protonation of the gel network, has a more dramatic influence on protamine release, the result of its higher pI (10.0) compared to that of insulin (5.3). As the DMAEMA content of the hydrogel was increased from 0 to 20 mol %, the diffusion coefficient of protamine increased by ca. 7-fold (1.7-12.2 x 10(-7) cm(2) s(-1)), whereas that of insulin increased only ca. 2-fold (1.7-4.0 x 10(-7) cm(2) s(-1)). This differential release confirms the role of internal protonation in effecting the greater release of the protonated drug molecule. Increasing the TEGDA content from 3 to 15 mol % reduced the diffusion coefficient ca. 3-fold for insulin (1.6-0.5 x 10(-7) cm(2) s(-1)) and 5-fold for protamine (4.0-0.8 x 10(-7) cm(2) s(-1)). The final D(ip) at 15 mol % TEGDA suggests that the smaller mesh size offsets any differential release that arises from protonation. The presence of PMA in the hydrogel formulation, which contributes additional cross-links by reason of the formation of siloxane macromers, did not change the usually observed Fickian diffusion mechanism.     

Study of blood compatibility with poly(2-methoxyethyl acrylate). Relationship between water structure and platelet compatibility in poly(2-methoxyethylacrylate-co-2-hydroxyethylmethacrylate)

Previously, we reported that poly(2-methoxyethylacrylate) (PMEA) showed excellent blood compatibility and implied that the water structure in PMEA contributed to the blood compatibility. In this study, the relationship between the water structure and the blood compatibility is clarified by studying the influence of the monomer composition of poly(MEA-co-HEMA) on the water structure and the blood compatibility of the copolymers. The water in the polymer was classified into three types: free water, freezing bound water, and nonfreezing water. The polymers with 0-30 mol % of HEMA content had a significant amount of freezing bound water, and the amount decreases greatly when the composition of HEMA exceeded 30 mol %. On the other hand, the amount of other water increased simply with an increase of HEMA content. The evaluation of the platelet compatibility of poly(MEA-co-HEMA) revealed that the adhesion number and the morphological change of platelet on the copolymer surface were least when the HEMA content was 0-20 mol %. These two results strongly suggest that the freezing bound water relates to the platelet compatibility of the polymers.     

Lipase catalyzed HEMA initiated ring-opening polymerization: in situ formation of mixed polyester methacrylates by transesterification

2-Hydroxyethyl methacrylate (HEMA) was used as initiator for the enzymatic ring-opening polymerization (ROP) of omega-pentadecalactone (PDL) and epsilon-caprolactone (CL). The lipase B from Candida antarctica was found to catalyze the cleavage of the ester bond in the HEMA end group of the formed polyesters, resulting in two major transesterification processes, methacrylate transfer and polyester transfer. This resulted in a number of different polyester methacrylate structures, such as polymers without, with one, and with two methacrylate end groups. Furthermore, the 1,2-ethanediol moiety (from HEMA) was found in the polyester products as an integral part of HEMA, as an end group (with one hydroxyl group) and incorporated within the polyester (polyester chains acylated on both hydroxyl groups). After 72 h, as a result of the methacrylate transfer, 79% (48%) of the initial amount of the methacrylate moiety (from HEMA) was situated (acylated) on the end hydroxyl group of the PPDL (PCL) polyester. In order to prepare materials for polymer networks, fully dimethacrylated polymers were synthesized in a one-pot procedure by combining HEMA-initiated ROP with end-capping using vinyl methacrylate. The novel PPDL dimethacrylate (>95% incorporated methacrylate end groups) is currently in use for polymer network formation. Our results show that initiators with cleavable ester groups are of limited use to obtain well-defined monomethacrylated macromonomers due to the enzyme-based transesterification processes. On the other hand, when combined with end-capping, well-defined dimethacrylated polymers (PPDL, PCL) were prepared.     

β-Cyclodextrin hydrogels as potential drug delivery systems

β-cyclodextrins (βCD) are cyclic oligosaccharides which have been widely employed for pharmaceutical applications. Discs of insoluble polymers were synthesized by crosslinking β-cyclodextrins with the reagent epichlorohydrin. In this work, the possibility of employing a polymer containing 60 ± 3% βCD for drug delivery of two antiinflammatory (naproxen and nabumetone) and two antifungal drugs (naftifine and terbinafine) has been investigated. The interaction of Naproxen with the polymers was evidenced by X-ray diffractometry, FTIR spectroscopy and differential thermal analysis. Drug release kinetics were carried out at physiological conditions of pH and temperature, and kinetic and diffusion constants were calculated by fitting 60% of the release profile according to the Korsmeyer-Peppas equation. Also, diffusion coefficients were calculated according to the simplified Higuchi model. The drug release followed a simple Fickian diffusion mechanism for all the model drugs. This study suggests that these hydrogel matrices are potentially suitable as sustained release systems.     

Small molecule diffusion into swelling iota-carrageenan gels: a fluorescence study

Small molecule diffusion into Iota-Carrageenan gel was studied by using steady-state fluorescence (SSF) technique. Pyranine, dissolved in water was used as fluorescence probe. Fluorescence emission intensity, I(p), and scattered light intensity, I(sc), were monitored to study diffusion and swelling processes at various temperatures respectively. Fickian and Li-Tanaka models were elaborated to produce diffusion, D, and collective diffusion, D(0), coefficients. Diffusion and swelling activation energies were also obtained and found to be 20.5 kj mol(-1) and 28.2 kj mol(-1), respectively.     

A Fickian diffusion transport process with features of transport catalysis. Doxorubicin transport in human red blood cells

The transport of the antineoplastic drug doxorubicin (Adriamycin) in human red blood cells was investigated by measuring the net efflux from loaded cells. Previous data indicated that doxorubicin transport was a Fickian diffusion transport process of the electrically neutral molecule through the lipid domain of the cell membrane (Dalmark, 1981 [In press]). However, doxorubicin transport showed saturation kinetics and a concentration-dependent temperature dependence with nonlinear Arrhenius plots. The two phenomena were related to the doxorubicin partition coefficient between 1-octanol and a water phase. This relationship indicated that the two phenomena were caused by changes in the physiochemical properties of doxorubicin in the aqueous phase and were not caused by interaction of doxorubicin with cell membrane components. The physicochemical properties of doxorubicin varied with concentration and temperature because of the ability of doxorubicin to form polymers by self-association in aqueous solution like other planar aromatic molecules through pi-electron orbital interaction. The hypothesis is proposed that doxorubicin transport across cell membranes takes place by simple Fickian diffusion.     

(1)H NMR study of the states of water in equilibrium poly(HEMA-co-THFMA) hydrogels

The spin-spin relaxation times, T(2), of hydrated samples of poly(hydroxymethyl methacrylate), PHEMA, poly(tetrahydrofurfuryl methacrylate), PTHFMA, and the corresponding HEMA-THFMA copolymers have been examined to probe the states of the imbibed water in these polymers. The decay in the transverse magnetization of water in fully hydrated samples of PHEMA, PTHFMA, and copolymers of HEMA and THFMA was described by a multiexponential function. The short component of T(2) was interpreted as water molecules that were strongly interacting with the polymer chains. The intermediate component of T(2) was assigned to water residing in the porous structure of the samples. The long component of T(2) was believed to arise from water residing in the remnants of cracks formed in the polymer network during water sorption.     

Synthesis, characterization and swelling studies of pH responsive psyllium and methacrylamide based hydrogels for the use in colon specific drug delivery

In order to utilize the psyllium husk a medicinally important natural polysaccharide and to develop the novel hydrogels meant for the colon specific drug delivery, we have prepared psyllium and methacrylamide based polymeric networks by using N,N′-methylenebisacrylamide (NN-MBAAm) as crosslinker and ammonium persulfate (APS) as initiator. To study various structural aspects of the polymeric networks thus formed psy-cl-poly(MAAm), these were characterized with SEMs, FTIR, TGA and swelling studies. The swelling studies of networks were carried out as a function of time, temperature, pH and [NaCl]. Equilibrium swelling has been observed to depend on both composition of the polymer and nature of swelling medium. Maximum percent swelling 1262 was observed for the polymeric network prepared with 19.45 × 10⁻³ mol/L of [NN-MBAAm] at 40 °C in 0.5 M NaOH solution. This article also discusses the release dynamics of tetracycline hydrochloride from the hydrogels, for the evaluation of the drug release mechanism and diffusion coefficients of drug from the polymer matrix. The effect of pH on the release pattern of tetracycline hydrochloride has been studied by varying the pH of the release medium. It has been observed from the release dynamics of drug from the hydrogels that the diffusion exponent ‘n’ have 0.477, 0.423 and 0.427 values and gel characteristic constant ‘k’ have 5.07 × 10⁻², 6.34 × 10⁻² and 6.38 × 10⁻² values, respectively, in distilled water, pH 2.2 buffer and pH 7.4 buffer solution. The values the ‘n’ indicated that the Fickian type diffusion mechanism occurred for the release of tetracycline hydrochloride from drug loaded psy-cl-poly(MAAm) polymers in different release mediums. In Fickian type diffusion mechanism, the rate of polymer chain relaxation is more as compare to the rate of drug diffusion from these hydrogels and release behavior follows Fick’s law of diffusion. In each release medium, the values of the initial diffusion coefficient ‘D_i’ for the release of tetracycline hydrochloride was higher than the values of late time diffusion coefficient ‘D_L’ indicating that in the start, the diffusion of drug from the polymeric matrix was faster as compare to the latter stages.     

A study of water diffusion into a high-amylose starch blend: the effect of moisture content and temperature

The effect of moisture content and temperature on water diffusion into a modified high amylose (< or = 90%) maize thermoplastic starch blend was investigated. Gravimetric and magnetic resonance imaging (MRI) studies were conducted to elucidate the diffusion mechanism and diffusion coefficients for this system. The diffusion coefficient data demonstrated that the rate of water diffusion into this blend was significantly dependent upon temperature and moisture content. Water diffusion was faster at higher temperatures and generally for samples stored at higher relative humidity environments. It was revealed from the gravimetric data that water diffusion into this starch blend was Fickian; however, further analysis of the MRI images found that the water diffusion mechanism was exponentially dependent on the concentration. This result was determined by comparing experimental water concentration profiles to a theoretical model calculated using the implicit Crank-Nicolson finite difference method.     

Effect of the template and functional monomer on the textural properties of molecularly imprinted polymers

Molecularly imprinted polymers (MIPs) for zearalenone analysis have been synthesized using the template mimics cyclododecyl 2,4-dihydroxybenzoate (CDHB), resorcinol and resorcylic acid. The MIPs are photochemically prepared from 2-(diethylamino)ethyl methacrylate (2-DAEM), 4-vinylpyridine (VIPY), 2-hydroxyethyl methacrylate (HEMA) or 1-allylpiperazine (1-ALPP) as the functional monomers, trimethylolpropane trimethacrylate (TRIM) as cross-linker, azobis(isobutyronitrile) as initiator and acetonitrile as porogen. Non-imprinted polymers have been also synthesized for reference purposes. The textural properties of the novel polymers (BET areas, pore volumes and pore size distributions) have been determined from nitrogen adsorption-desorption isotherms. These parameters have shown to be strongly dependent on the presence of the template and the monomer nature. Scanning electron microscopy and solvent uptake experiments support these findings. Microporosity contributes less than 7% to the total pore volume for all the polymers prepared. Interestingly, a 3.5 nm pore opening is observed for all the polymers and additional pore apertures in the 20-40 nm region for VIPY-, HEMA- and 2-DAEM-based MIPs whereas a much wider opening size distribution has been measured for the 1-ALPP-based MIP. Molecular modeling and, particularly, (1)H NMR experiments demonstrate the strong (2:1) complex formed between 1-ALPP and the diphenolic CDHB (K(11)=4.7 x 10(4)M(-1) and K(12) = 2.6 x 10(2)M(-1) in acetonitrile) that make the corresponding MIP the most suitable for zearalenone recognition in real samples.     

Binding of streptavidin with biotinylated thermosensitive nanospheres based on poly(N,N-diethylacrylamide-co-2-hydroxyethyl methacrylate)

Thermosensitive polymer nanospheres based on N,N-diethylacrylamide and 2-hydroxyethyl methacrylate (HEMA) have been prepared, characterized, and conjugated with biotin. The thermosensitivity of poly(N,N-diethylacrylamide) was enhanced by the incorporation of HEMA up to about 40 mol %. Atomic force microscopic images show that these particles can be closely packed even without the surface charges as in the latex particles. Biotinylation reduces the thermosensitivity of the copolymer nanospheres. The biotinylated hydrogel nanospheres showed a reduction in size upon binding with streptavidin, indicating the formation of a less hydrophilic conjugate. No aggregation of the biotinylated particles due to the cross-linking effect of streptavidin was observed. This size change could be reversed by the addition of free biotin to the system. The interaction is specific, and no such changes were observed when streptavidin was replaced by bovine serum albumin.     

Hemocompatibility of hydrophilic antimicrobial copolymers of alkylated 4-vinylpyridine

Quaternized poly(vinylpyridine) (PVP) is a polymer with inherent antimicrobial properties that is effective against Gram-positive bacteria, Gram-negative bacteria, viruses, and yeast cells. However, quaternized PVP has poor biocompatibility, which prevents its use in biomaterial applications. Copolymerization was examined as a method of modifying the structure to incorporate biocompatibility. Polyethyleneglycol methyl ether methacrylate (PEGMA) and hydroxyethyl methacrylate (HEMA) are polymers generally known to be biocompatible and thus were chosen as comonomers. Random copolymers of 4-vinylpyridine and PEGMA or HEMA were synthesized via free radical polymerization and quaternized with bromohexane. Copolymer biocompatibility was characterized by interaction with human red blood cells to analyze hemolysis. Hemolysis of human red blood cells was conducted on insoluble films and on water-soluble polymers in a serial dilution study. Hemolysis results demonstrated that blood compatibility does not depend on PEG chain length in PEGMA incorporated copolymers. Results indicate a critical weight ratio of PEGMA to VP in copolymers separating the no-hemolysis regime from 100% hemolysis.     

Synthesis, characterization, and evaluation as transfection reagents of double-hydrophilic star copolymers: effect of star architecture

Five star polymers of the ionizable hydrophilic 2-(dimethylamino)ethyl methacrylate (DMAEMA) and the nonionic hydrophilic methoxy hexa(ethylene glycol) methacrylate (HEGMA) were prepared by group transfer polymerization (GTP) using ethylene glycol dimethacrylate (EGDMA) as coupling agent. In particular, four isomeric star copolymers, one heteroarm, two star block and one statistical star, with 90% mol DMAEMA and 10% mol HEGMA, plus one star homopolymer of DMAEMA with degrees of polymerization of the arms equal to 20 were synthesized. The polymers were characterized in terms of their molar masses (MMs) and compositions using gel permeation chromatography (GPC) and proton nuclear magnetic resonance (1H NMR) spectroscopy, respectively. The hydrodynamic diameters in water indicated some aggregation for all the star polymers except for the statistical copolymer star, while the pK values of the DMAEMA units were around 7 for all star polymers. All the star polymers were evaluated for their ability to transfect human cervical HeLa cancer cells with the modified plasmid pRLSV40 bearing the enhanced green fluorescent protein (EGFP) as the reporter gene. All four star copolymers showed decreased toxicity compared to that of the DMAEMA star homopolymer for the same amounts of star polymer tested. The star block copolymer with outer DMAEMA blocks exhibited the highest overall transfection efficiency, 11%, compared to that of all the star polymers examined in this study. This efficiency was the same as that of the commercially available transfection reagent SuperFect.     

Mechanism of polymer-induced hemolysis: nanosized pore formation and osmotic lysis

Hemolysis induced by antimicrobial polymers was examined to gain an understanding of the mechanism of polymer toxicity to human cells. A series of cationic amphiphilic methacrylate random copolymers containing primary ammonium groups as the cationic functionality and either butyl or methyl groups as hydrophobic side chains have been prepared by radical copolymerization. Polymers with 0-47 mol % methyl groups in the side chains, relative to the total number of monomeric units, showed antimicrobial activity but no hemolysis. The polymers with 65 mol % methyl groups or 27 mol % butyl groups displayed both antimicrobial and hemolytic activity. These polymers induced leakage of the fluorescent dye calcein trapped in human red blood cells (RBCs), exhibiting the same dose-response curves as for hemoglobin leakage. The percentage of disappeared RBCs after hemolysis increased in direct proportion to the hemolysis percentage, indicating complete release of hemoglobin from fractions of RBCs (all-or-none leakage) rather than partial release from all cells (graded leakage). An osmoprotection assay using poly(ethylene glycol)s (PEGs) as osmolytes indicated that the PEGs with MW > 600 provided protection against hemolysis while low molecular weight PEGs and sucrose had no significant effect on the hemolytic activity of polymers. Accordingly, we propose the mechanism of polymer-induced hemolysis is that the polymers produce nanosized pores in the cell membranes of RBCs, causing an influx of small solutes into the cells and leading to colloid-osmotic lysis.     

Influence of phosphated cross-linked high amylose on in vitro release of different drugs

The influence of structural characteristics of high amylose cross-linked at different degrees on the release of drugs with important molecular differences, namely sodium diclophenac (SD) and nicotinamide (NI), was assessed in vitro from non-compacted systems. The release profiles were related with classical kinetic mathematical models for better understanding of the release mechanism. An increase in polymer cross-linking degree resulted in longer release time for both drugs, although SD generally was released slower than NI. SD release from samples cross-linked at 2% of basis was driven mainly by Fickian diffusion, while from samples cross-linked at 4% of basis follows anomalous mechanism. Inversely, anomalous mechanism was responsible for NI release from 2% samples and Fickian diffusion from 4% samples. Results suggest that the performance of cross-linked high amylose as excipient for controlled drug release not only depends on cross-linking degree but also is highly influenced by structural characteristics of the drug.     

Encapsulating live cells with water-soluble chitosan in physiological conditions

A new class of microcapsules was prepared under physiological conditions by polyelectrolyte complexation between two oppositely-charged, water-soluble polymers. The microcapsules consisted of an inner core of half N-acetylated chitosan and an outer shell of methacrylic acid (MAA) (20.4%)-hydroxyethyl methacrylate (HEMA) (27.4%)-methyl methacrylate (MMA) (52.2%) (MAA-HEMA-MMA) terpolymer. Both 400 and 150 kDa half N-acetylated chitosans maintained good water solubility and supplied enough protonated amino groups to coacervate with terpolymer at pH 7.0-7.4, in contrast to other chitosan-based microcapsules which must be prepared at pH <6.5. The viscosity of half N-acetylated chitosan solutions between 80 and 3000 cPas allowed the formation of microcapsules with spherical shape. Molar mass, pH and concentration of half N-acetylated chitosan, and reaction time, influenced the morphology, thickness and porosity of the microcapsules. Microcapsules formed with high concentration of half N-acetylated chitosan exhibited improved mechanical stability, whereas microcapsules formed with low concentration of half N-acetylated chitosan exhibited good permeability. This 3D microenvironment has been configured to cultivate sensitive anchorage-dependent cells such as hepatocytes to maintain high level of functions.