Structure and function of Tn5467, a Tn21-like transposon located on the Thiobacillus ferrooxidans broad-host-range plasmid pTF-FC2.

A 3.5-kb region of plasmid pTF-FC2, which contains a transposon-like element designated Tn5467, has been sequenced, and its biological activity has been investigated. The transposon is bordered by two 38-bp inverted repeat sequences which have sequence identity in 37 of 38 and in 38 of 39 bp to the tnpA distal and tnpA proximal inverted repeats of Tn21, respectively. Within these borders, open reading frames with amino acid similarity to a glutaredoxin-like protein, a MerR regulatory protein, and a multidrug-resistant-membrane transport-like protein were found. The gene for the glutaredoxin-like protein was expressed in Escherichia coli and enabled growth of a glutathione-requiring E. coli trxA gshA mutant on minimal medium and the reduction of methionine sulfoxide to methionine. In addition, there were two regions which, when translated, had homology to 85% of the N-terminal region of the Tn21 resolvase (tnpR) and to 15% of the C terminus of the Tn21 transposase (tnpA). A region containing res-like sites was located immediately upstream of the partial tnpR gene. Neither the partial transposase nor the resolvase genes of Tn5467 were biologically active, but Tn5467 was transposed and resolved when the Tn21 transposase and resolvase were provided in trans. Tn5467 appears to be a defective transposon which belongs to the Tn21 subgroup of the Tn3 family.     

Purification and preliminary characterization of the Escherichia coli K-12 recF protein.

The recF gene of Escherichia coli is known to encode an Mr-40,000 protein that is involved in DNA recombinationa nd postreplication DNA repair. To characterize the role of the recF gene product in these processes, the recF gene was cloned downstream of a tac promoter to facilitate overproduction of the recF gene product. The RecF protein was overproduced and purified to apparent homogeneity. N-terminal protein sequence analysis demonstrated that the purified protein had the sequence that was predicted from the DNA sequence of the recF gene, except that the predicted N-terminal Met was not present. The RecF protein bound to single-stranded oligonucleotides in filter binding and gel filtration assays. Maximal binding required 2 to 3 min of incubation at 37 degrees C; the binding reaction had a pH optimum of 7.0, did not require divalent cations, and was inhibited by NaCl concentrations of greater than 250 mM. The Kd of RecF protein binding to a 59-base single-stranded oligonucleotide was on the order of 1.3 X 10(-7) M, and the reaction did not show cooperativity. Experiments measuring the binding to various DNA substrates and competition binding experiments with different DNA molecules demonstrated that RecF protein binds preferentially to single-stranded, linear DNA molecules.     

Tn5 as a model for understanding DNA transposition

Tn5 is an excellent model system for understanding the molecular basis of DNA-mediated transposition. Mechanistic information has come from genetic and biochemical investigations of the transposase and its interactions with the recognition DNA sequences at the ends of the transposon. More recently, molecular structure analyses of catalytically active transposase; transposon DNA complexes have provided us with unprecedented insights into this transposition system. Transposase initiates transposition by forming a dimeric transposase, transposon DNA complex. In the context of this complex, the transposase then catalyses four phosphoryl transfer reactions (DNA nicking, DNA hairpin formation, hairpin resolution and strand transfer into target DNA) resulting in the integration of the transposon into its new DNA site. The studies that elucidated these steps also provided important insights into the integration of retroviral genomes into host DNA and the immune system V(D)J joining process. This review will describe the structures and steps involved in Tn5 transposition and point out a biologically important although surprising characteristic of the wild-type Tn5 transposase. Transposase is a very inactive protein. An inactive transposase protein ensures the survival of the host and thus the survival of Tn5.     

The nucleotide sequence of the tnpA gene of Tn21.

The nucleotide sequence of the tnpA gene of Tn21 is presented. The transposase encoded by this gene is exactly the same length (988 amino acids) as the Tn501 transposase (4), and shows 72% homology overall with this protein, with greater homology towards the C-terminus. The sequence of the transposase is discussed in the context of the evolution of Class II transposable elements and of the characteristics of the enzyme's action.     

Binding of the Tn3 transposase to the inverted repeats of Tn3

The transposase protein and the inverted repeat sequences of Tn3 are both essential for Tn3 cointegrate formation and transposition. We have developed two assays to detect site-specific binding of transposase to the inverted repeats: (1) a nitrocellulose filter binding assay in which transposase preferentially retains DNA fragments containing inverted repeat sequences, and (2) a DNase 1 protection assay in which transposase prevents digestion of the inverted repeats by DNase 1. Both assays show that transposase binds directly to linear, duplex DNA containing the inverted repeats. The right inverted repeat of Tn3 binds slightly more strongly than the left one. Site-specific binding requires magnesium but does not require a high energy cofactor.     

Amino-terminal sequence of the Tn3 transposase protein

The amino-terminal sequence of the Tn3 transposase protein was determined to be Pro-Val-Asp-Phe-Leu-Thr-Thr-Glu-Gln-Val-Glu-Ser.... This was determined both from an active transposase protein purified from a transposase overproducing mutant strain and from a hybrid transposase-beta-galactosidase fusion protein. The amino acid sequence corresponded to the DNA sequence of the transposase gene beginning at an ATG initiation codon, as previously predicted from the analysis of transposase-beta-galactosidase gene fusions.     

Transposition of Tn1000: in vivo properties.

Transposition mediated by the Tn1000 transposase was investigated by using transposon variants carrying synthetic or wild-type termini but no intact Tn1000 genes. Transposon Tn1001, whose only homologies to Tn1000 are in its 38-base-pair terminal inverted repeats, transposed at the same rate as Tn1005, an artificial construct carrying wild-type Tn1000 termini and approximately 1 kilobase of flanking Tn1000 DNA at each end, when transposase was supplied in trans. The majority of the transpositions into pOX38 gave rise to cointegrates, but approximately 10% of the products expressed phenotypes of direct transpositions. The expression and temperature dependence of the tnpA gene product were examined by studying transposition of Tn1001 to bacteriophage lambda. The temperature optimum for transposition was 37 degrees C, and the transposase was stable for up to 2 h at this temperature.     

Involvement of E. coli dcm methylase in Tn3 transposition

The effects of DNA methyltransferases on Tn3 transposition were investigated. The E. coli dam (deoxyadenosine methylase) gene was found to have no effect on Tn3 transposition. In contrast, Tn3 was found to transpose more frequently in dcm+ (deoxycytosine methylase) cells than in dcm- mutants. When the EcoRII methylase gene was introduced into dcm- cells (E. coli strain GM208), the frequency of Tn3 transposition in GM208 was dramatically increased. The EcoRII methylase recognizes and methylates the same sequence as does the dcm methylase. These results suggest that deoxycytosine methylase modified DNA may be a preferred target for Tn3 transposition. Experiments were also performed to determine whether the Tn3 transposase was involved in DNA modification. Plasmid DNA isolated from dcm- E. coli containing the Tn3 transposase gene was susceptible to ApyI digestion but resistant to EcoRI digestion, suggesting that Tn3 transposase modified the dcm recognition sequence. In addition, restriction enzymes TaqI, AvaII, BglI and HpaII did not digest this DNA completely, suggesting that the recognition sequences of TaqI, AvaII, BglI and HpaII were modified by Tn3 transposase to a certain degree. The type(s), the extent and mechanism(s) of this modification remain to be investigated.     

Complete nucleotide sequence of Tn1721: gene organization and a novel gene product with features of a chemotaxis protein.

The complete 11,139-nucleotide sequence of transposon Tn1721 has been determined. It contains three 38-bp inverted repeats, and (in this order) a new orfI, a resolution site (res), genes encoding resolvase (tnpR), transposase (tnpA), tetracycline-resistance (TcR) repressor (tetR), TcR (tetA) and a truncated transposase gene (tnpA'). The modulator origin of Tn1721 from at least three separate sources is supported by the distinctive codon usages of orfI, tnpR/tnpA and tetR/tetA, and by sequence similarities with Tn501 (tnpR/tnpA) and RP1 (tetR/tetA). The ORFI-encoded 56-kDa polypeptide exhibits features of a methyl-accepting chemotaxis protein (MCP) with a conserved signal domain and a potential transmembrane domain; this polypeptide cross-reacts with anti-MCP antiserum. Like chemotaxis genes, orfI is transcribed from a sigma 28-like promoter. The overexpressed orfI gene product interferes with MCP-dependent chemotaxis suggesting that it completes for soluble transducer protein(s) in the cell. The potential selective advantage of this novel transposon-borne gene is discussed.     

Molecular genetic analysis of the Tn5041 transposition system

A study was made of the transposition of the mercury resistance transposon Tn5041 which, together with the closely related toluene degradation transposon Tn4651, forms a separate group in the Tn3 family. Transposition of Tn5041 was host-dependent: the element transposed in its original host Pseudomonas sp. KHP41 but not in P. aeruginosa PAO-R and Escherichia coli K12. Transposition of Tn5041 in these strains proved to be complemented by the transposase gene (tnpA) of Tn4651. The gene region determining the host dependence of Tn5041 transposition was localized with the use of a series of hybrid (Tn5041 x Tn4651) tnpA genes. Its location in the 5'-terminal one-third of the transposase gene is consistent with the data that this region is involved in the formation of the transposition complex in transposons of the Tn3 family. As in other transposons of this family, transposition of Tn5041 occurred via cointegrate formation, suggesting its replicative mechanism. However, neither of the putative resolution proteins encoded by Tn5041 resolved the cointegrates formed during transposition or an artificial cointegrate in E. coli K12. Similar data were obtained with the mercury resistance transposons isolated from environmental Pseudomonas strains and closely related to Tn5041 (Tn5041 subgroup).     

Gamma delta transposase. Purification and analysis of its interaction with a transposon end.

gamma delta, a member of the Tn3 family of prokaryotic transposons, encodes a transposase that binds to the 35-base pair (bp) terminal inverted repeats (IRs) which define the transposing DNA segment. The gamma delta transposase has been overexpressed, identified by molecular weight determination and by immunoblotting, and purified to homogeneity. Production of soluble transposase required the presence of Mg2+ prior to cell lysis. Fractions from a Sephacryl S-300 column contained levels of IR-binding activity that parallel the concentration of transposase, indicating that transposase alone is sufficient for binding to the ends of gamma delta. Hydroxyl radical footprinting indicated that transposase binds to one face of the DNA helix. The protected region extends across the IR and up to 17 bp into the flanking DNA. Integration host factor (IHF), which binds adjacent to transposase, also protects one face of the DNA helix and is shifted about 70 degrees around the helical axis from the transposase protection. Analysis of transposase-DNA complexes by electrophoresis on nondenaturing gels indicated that three complexes, two within the gel and one trapped at the well, result from specific interactions with the IR. The complex in the well and one complex in the gel were analyzed by methylation interference experiments. The results indicate that transposase interacts with specific base pairs between positions 10 and 37 of the IR, a region encompassing three consecutive major and minor grooves. Methylated bases at the very end of the transposon (positions 1-9) and in the flanking DNA did not inhibit transposase binding. Thus, although transposase seems to be in intimate contact throughout the IR of gamma delta and 17 bp of flanking DNA, specific base pair recognition needed for binding appears to be determined by the inner three-quarters of the IR.     

Overproduction of the Tn3 transposition protein and its role in DNA transposition

Five single base pair mutations that increase expression of the tnpA (transposase) gene of the Tn3 transposon approximately 30-fold, but which still allow the gene to be regulated, have been isolated by using a generally applicable procedure that involves distally linked lac gene fusions. The mutations, which are all located in a region controlling initiation of translation of the tnpA gene, do not affect normal repression of tnpA by the tnpR gene product, and yield up to a 9000-fold increase in tnpA protein production when combined with a tnpR mutation and placed on a high copy number plasmid. The mutation yielding the highest expression level was separated from the fused lac gene segment by homologous recombination and was found to increase the rate of transposition without altering the nature of the transposition product; in cells defective in both the E. coli recA gene and the tnpR gene of tn3, cointegrate transposition-intermediate structures occur with the overproducing--as well as with the wild-type--tnpA gene. In the presence of a functional Tn3 tnpR gene or the related transposon delta gamma, such cointegrate structures are resolved into the final products of transposition.     

Existence in Escherichia coli of a mechanism that generates ''staggered'' head-to-head dimers of plasmid DNA; possible involvement of the Tn3 transposase.

The structures of two plasmids, one found in one of the transformants with putative products of an in vitro DNA rearrangement reaction containing the Tn3 transposase, and another found as a spontaneous tnpA negative derivative of an overproducer of the Tn3 transposase, have been elucidated. They both had shown non-conventional results in restriction enzyme analysis. For the determination of the structures, we used restriction enzyme analysis, denaturation and renaturation experiments, and DNA nucleotide sequencing. The structures turned out to be 'staggered' head-to-head dimers of the original monomer plasmids, containing gigantic inverted repeats separated by two identical spacers which are also in inverted orientations themselves. Two alternative models for the mode of origin of such a structure, a bimolecular model and a unimolecular one, are discussed. The circumstances in which these two plasmids occurred suggest possible involvement of the Tn3 transposase in their generation.     

The calcium and magnesium binding sites on cardiac troponin and their role in the regulation of myofibrillar adenosine triphosphatase

The cardiac troponin (Tn) complex, consisting of a Ca2+-binding subunit (TnC), an inhibitory subunit (TnI), and a tropomyosin-binding subunit (TnT), has been reconstituted from purified troponin subunits isolated from bovine heart muscle. The Ca2+-binding properties of cardiac Tn were determined by equilibrium dialysis using either EGTA or EDTA to regulate the free Ca2+ concentration. Cardiac Tn binds 3 mol Ca2+/mol and contains two Ca2+-binding sites with a binding constant of 3 X 10(8) M-1 and one binding site with a binding constant of 2 X 10(6) M-1. In the presence of 4 mM MgC12, the binding constant of the sites of higher affinity is reduced to 3 X 10(7) M-1, while Ca2+ binding to the site at the lower affinity is unaffected. The two high affinity Ca2+-binding sites of cardiac Tn are analogous to the two Ca2+-Mg2+ sites of skeletal Tn, while the single low affinity site is similar to the two Ca2+-specific sites of skeletal Tn (Potter, J. D., and Gergely, J. (1975) J. Biol. Chem. 250, 4625-5633). The Ca2+-binding properties of the complex of TnC and TnI (1:1 molar ratio) were similar to those of Tn. Cardiac TnC also binds 3 mol of Ca2+/mol and contains two sites with a binding constant of 1 X 10(7) M-1 and a single site with a binding constant of 2 X 10(5) M-1. Assuming competition between Mg2+ and Ca2+ for the high affinity sites of TnC and Tn, the binding constants for Mg2+ were 0.7 and 3.0 X 10(3) M-1, respectively. The Ca2+ dependence of cardiac myofibrillar ATPase activity was similar to that of an actomyosin preparation regulated by the reconstituted troponin complex. Comparison by the Ca2+-binding properties of cardiac Tn and the cardiac myofibrillar ATPase activity as a function of [Ca2+] and at millimolar [Mg2+] suggests that activation of the ATPase occurs over the same range of [Ca2+] where the Ca2+-specific site of cardiac Tn binds Ca2+.