Slk19p is a centromere protein that functions to stabilize mitotic spindles.

We have identified a novel centromere-associated gene product from Saccharomyces cerevisiae that plays a role in spindle assembly and stability. Strains with a deletion of SLK19 (synthetic lethal Kar3p gene) exhibit abnormally short mitotic spindles, increased numbers of astral microtubules, and require the presence of the kinesin motor Kar3p for viability. When cells are deprived of both Slk19p and Kar3p, rapid spindle breakdown and mitotic arrest is observed. A functional fusion of Slk19p to green fluorescent protein (GFP) localizes to kinetochores and, during anaphase, to the spindle midzone, whereas Kar3p-GFP was found at the nuclear side of the spindle pole body. Thus, these proteins seem to play overlapping roles in stabilizing spindle structure while acting from opposite ends of the microtubules.     

Differential regulation of the Kar3p kinesin-related protein by two associated proteins, Cik1p and Vik1p

The mechanisms by which kinesin-related proteins interact with other proteins to carry out specific cellular processes is poorly understood. The kinesin-related protein, Kar3p, has been implicated in many microtubule functions in yeast. Some of these functions require interaction with the Cik1 protein (Page, B.D., L.L. Satterwhite, M.D. Rose, and M. Snyder. 1994. J. Cell Biol. 124:507-519). We have identified a Saccharomyces cerevisiae gene, named VIK1, encoding a protein with sequence and structural similarity to Cik1p. The Vik1 protein is detected in vegetatively growing cells but not in mating pheromone-treated cells. Vik1p physically associates with Kar3p in a complex separate from that of the Kar3p-Cik1p complex. Vik1p localizes to the spindle-pole body region in a Kar3p-dependent manner. Reciprocally, concentration of Kar3p at the spindle poles during vegetative growth requires the presence of Vik1p, but not Cik1p. Phenotypic analysis suggests that Cik1p and Vik1p are involved in different Kar3p functions. Disruption of VIK1 causes increased resistance to the microtubule depolymerizing drug benomyl and partially suppresses growth defects of cik1Delta mutants. The vik1Delta and kar3Delta mutations, but not cik1Delta, partially suppresses the temperature-sensitive growth defect of strains lacking the function of two other yeast kinesin-related proteins, Cin8p and Kip1p. Our results indicate that Kar3p forms functionally distinct complexes with Cik1p and Vik1p to participate in different microtubule-mediated events within the same cell.     

The Kar3p kinesin-related protein forms a novel heterodimeric structure with its associated protein Cik1p

Proteins that physically associate with members of the kinesin superfamily are critical for the functional diversity observed for these microtubule motor proteins. However, quaternary structures of complexes between kinesins and kinesin-associated proteins are poorly defined. We have analyzed the nature of the interaction between the Kar3 motor protein, a minus-end-directed kinesin from yeast, and its associated protein Cik1. Extraction experiments demonstrate that Kar3p and Cik1p are tightly associated. Mapping of the interaction domains of the two proteins by two-hybrid analyses indicates that Kar3p and Cik1p associate in a highly specific manner along the lengths of their respective coiled-coil domains. Sucrose gradient velocity centrifugation and gel filtration experiments were used to determine the size of the Kar3-Cik1 complex from both mating pheromone-treated cells and vegetatively growing cells. These experiments predict a size for this complex that is consistent with that of a heterodimer containing one Kar3p subunit and one Cik1p subunit. Finally, immunoprecipitation of epitope-tagged and untagged proteins confirms that only one subunit of Kar3p and Cik1p are present in the Kar3-Cik1 complex. These findings demonstrate that the Kar3-Cik1 complex has a novel heterodimeric structure not observed previously for kinesin complexes.     

The spindle positioning protein Kar9p interacts with the sumoylation machinery in Saccharomyces cerevisiae

Accurate positioning of the mitotic spindle is important for the genetic material to be distributed evenly in dividing cells, but little is known about the mechanisms that regulate this process. Here we report that two microtubule-associated proteins important for spindle positioning interact with several proteins in the sumoylation pathway. By two-hybrid analysis, Kar9p and Bim1p interact with the yeast SUMO Smt3p, the E2 enzyme Ubc9p, an E3 Nfi1p, as well as Wss1p, a weak suppressor of a temperature-sensitive smt3 allele. The physical interaction between Kar9p and Ubc9p was confirmed by in vitro binding assays. A single-amino-acid substitution in Kar9p, L304P disrupted its two-hybrid interaction with proteins in the sumoylation pathway, but retained its interactions with the spindle positioning proteins Bim1p, Stu2p, Bik1p, and Myo2p. The kar9-L304P mutant showed defects in positioning the mitotic spindle, with the spindle located more distally than normal. Whereas wild-type Kar9p-3GFP normally localizes to only the bud-directed spindle pole body (SPB), Kar9p-L304P-3GFP was mislocalized to both SPBs. Using a reconstitution assay, Kar9p was sumoylated in vitro. We propose a model in which sumoylation regulates spindle positioning by restricting Kar9p to one SPB. These findings raise the possibility that sumoylation could regulate other microtubule-dependent processes.     

Novel roles for saccharomyces cerevisiae mitotic spindle motors.

The single cytoplasmic dynein and five of the six kinesin-related proteins encoded by Saccharomyces cerevisiae participate in mitotic spindle function. Some of the motors operate within the nucleus to assemble and elongate the bipolar spindle. Others operate on the cytoplasmic microtubules to effect spindle and nuclear positioning within the cell. This study reveals that kinesin-related Kar3p and Kip3p are unique in that they perform roles both inside and outside the nucleus. Kar3p, like Kip3p, was found to be required for spindle positioning in the absence of dynein. The spindle positioning role of Kar3p is performed in concert with the Cik1p accessory factor, but not the homologous Vik1p. Kar3p and Kip3p were also found to overlap for a function essential for the structural integrity of the bipolar spindle. The cytoplasmic and nuclear roles of both these motors could be partially substituted for by the microtubule-destabilizing agent benomyl, suggesting that these motors perform an essential microtubule-destabilizing function. In addition, we found that yeast cell viability could be supported by as few as two microtubule-based motors: the BimC-type kinesin Cin8p, required for spindle structure, paired with either Kar3p or Kip3p, required for both spindle structure and positioning.     

Loss of function of the Cik1/Kar3 motor complex results in chromosomes with syntelic attachment that are sensed by the tension checkpoint

The attachment of sister kinetochores by microtubules emanating from opposite spindle poles establishes chromosome bipolar attachment, which generates tension on chromosomes and is essential for sister-chromatid segregation. Syntelic attachment occurs when both sister kinetochores are attached by microtubules from the same spindle pole and this attachment is unable to generate tension on chromosomes, but a reliable method to induce syntelic attachments is not available in budding yeast. The spindle checkpoint can sense the lack of tension on chromosomes as well as detached kinetochores to prevent anaphase onset. In budding yeast Saccharomyces cerevisiae, tension checkpoint proteins Aurora/Ipl1 kinase and centromere-localized Sgo1 are required to sense the absence of tension but are dispensable for the checkpoint response to detached kinetochores. We have found that the loss of function of a motor protein complex Cik1/Kar3 in budding yeast leads to syntelic attachments. Inactivation of either the spindle or tension checkpoint enables premature anaphase entry in cells with dysfunctional Cik1/Kar3, resulting in co-segregation of sister chromatids. Moreover, the abolished Kar3-kinetochore interaction in cik1 mutants suggests that the Cik1/Kar3 complex mediates chromosome movement along microtubules, which could facilitate bipolar attachment. Therefore, we can induce syntelic attachments in budding yeast by inactivating the Cik1/Kar3 complex, and this approach will be very useful to study the checkpoint response to syntelic attachments.     

Direct interaction between yeast spindle pole body components: Kar1p is required for Cdc31p localization to the spindle pole body

The Saccharomyces cerevisiae genes KAR1 and CDC31 are required for the initial stages of spindle pole body (SPB) duplication in yeast. The Cdc31 protein is most related to caltractin/centrin, a calcium-binding protein present in microtubule organizing centers in many organisms. Because of a variety of genetic interactions between CDC31 and KAR1 (Vallen, E. A., W. Ho. M. Winey, and M. D. Rose. 1994. Genetics. In press), we wanted to determine whether Cdc31p and Kar1p physically interact. Cdc31p was expressed and purified from Escherichia coli and active for binding calcium. Using a protein blotting technique, Cdc31p bound to Kar1p in vitro via an essential domain in Kar1p required for SPB duplication (Vallen, E. A., M. A. Hiller, T. Y. Scherson, and M. D. Rose. 1992a. J. Cell Biol. 117:1277-1287). By immunofluorescence microscopy, we determined that the interaction also occurs in vivo. Cdc31p was localized to the SPB in wild-type cells but was mislocalized in a kar1 mutant strain. In a kar1 mutant containing a dominant CDC31 suppressor, Cdc31p was again localized to the SPB. Furthermore, the localization of Cdc31p to the SPB was affected by the overexpression of Kar1p-beta-galactosidase hybrids. Based on these data, we propose that the essential function of Kar1p is to localize Cdc31p to the SPB, and that this interaction is normally required for SPB duplication.     

The CLIP-170 homologue Bik1p promotes the phosphorylation and asymmetric localization of Kar9p

Accurate positioning of the mitotic spindle in Saccharomyces cerevisiae is coordinated with the asymmetry of the two poles and requires the microtubule-to-actin linker Kar9p. The asymmetric localization of Kar9p to one spindle pole body (SPB) and microtubule (MT) plus ends requires Cdc28p. Here, we show that the CLIP-170 homologue Bik1p binds directly to Kar9p. In the absence of Bik1p, Kar9p localization is not restricted to the daughter-bound SPB, but it is instead found on both SPBs. Kar9p is hypophosphorylated in bik1delta mutants, and Bik1p binds to both phosphorylated and unphosphorylated isoforms of Kar9p. Furthermore, the two-hybrid interaction between full-length KAR9 and the cyclin CLB5 requires BIK1. The binding site of Clb5p on Kar9p maps to a short region within the basic domain of Kar9p that contains a conserved phosphorylation site, serine 496. Consistent with this, Kar9p is found on both SPBs in clb5delta mutants at a frequency comparable with that seen in kar9-S496A strains. Together, these data suggest that Bik1p promotes the phosphorylation of Kar9p on serine 496, which affects its asymmetric localization to one SPB and associated cytoplasmic MTs. These findings provide further insight into a mechanism for directing centrosomal inheritance.     

Interaction of the yeast gamma-tubulin complex-binding protein Spc72p with Kar1p is essential for microtubule function during karyogamy.

The spindle pole body component Kar1p has a function in nuclear fusion during conjugation, a process known as karyogamy. The molecular role of Kar1p during this process is poorly understood. Here we show that the yeast gamma-tubulin complex-binding protein Spc72p interacts directly with the N-terminal domain of Kar1p, thereby targeting the gamma-tubulin complex to the half bridge, a substructure of the spindle pole body, where it organizes microtubules. This binding of Spc72p to Kar1p has only a minor role during vegetative growth, whereas it becomes essential for karyogamy in mating cells, explaining the important role of Kar1p in this process. We also show that the localization of Spc72p within the spindle pole body changes throughout the cell cycle and even more strongly in response to mating pheromone. Taken together, these observations suggest that the relocalization of Spc72p within the spindle pole body is the 'landmark' event in the pheromone-induced reorganization of the cytoplasmic microtubules.     

The Kar3-interacting protein Cik1p plays a critical role in passage through meiosis I in Saccharomyces cerevisiae.

Meiosis I in Saccharomyces cerevisiae is dependent upon the motor protein Kar3. Absence of Kar3p in meiosis results in an arrest in prophase I. Cik1p and Vik1p are kinesin-associated proteins known to modulate the function of Kar3p in the microtubule-dependent processes of karyogamy and mitosis. Experiments were performed to determine whether Cik1p and Vik1p are also important for the function of Kar3p during meiosis. The meiotic phenotypes of a cik1 mutant were found to be similar to those of kar3 mutants. Cells without Cik1p exhibit a meiotic defect in homologous recombination and synaptonemal complex formation. Most cik1 mutant cells, like kar3 mutants, arrest in meiotic prophase; however, in cik1 mutants this arrest is less severe. These data are consistent with the model that Cik1p is necessary for some, but not all, of the roles of Kar3p in meiosis I. vik1 mutants sporulate at wild-type levels, but have reduced spore viability. This loss in viability is partially attributable to vegetative chromosome loss in vik1 diploids. Cellular localization experiments reveal that Kar3p, Cik1p, and Vik1p are present throughout meiosis and are consistent with Cik1p and Vik1p having different meiotic roles.     

The Cdc31p-binding protein Kar1p is a component of the half bridge of the yeast spindle pole body

KAR1 has been identified as an essential gene which is involved in karyogamy of mating yeast cells and in spindle pole body duplication of mitotic cells (Rose, M. D., and G. R. Fink. 1987. Cell. 48:1047-1060). We investigated the cell cycle-dependent localization of the Kar1 protein (Kar1p) and its interaction with other SPB components. Kar1p is associated with the spindle pole body during the entire cell cycle of yeast. Immunoelectron microscopic studies with anti-Kar1p antibodies or with the monoclonal antibody 12CA5 using an epitope-tagged, functional Kar1p revealed that Kar1p is associated with the half bridge or the bridge of the spindle pole body. Cdc31p, a Ca(2+)-binding protein, was previously identified as the first component of the half bridge of the spindle pole body (Spang, A., I. Courtney, U. Fackler, M. Matzner, and E. Schiebel. 1993. J. Cell Biol. 123:405-416). Using an in vitro assay we demonstrate that Cdc31p specifically interacts with a short sequence within the carboxyl terminal half of Kar1p. The potential Cdc31p- binding sequence of Kar1p contains three acidic amino acids which are not found in calmodulin-binding peptides, explaining the different substrate specificities of Cdc31p and calmodulin. Cdc31p was also able to bind to the carboxy terminus of Nuflp/Spc110p, another component of the SPB (Kilmartin, J. V., S. L. Dyos, D. Kershaw, and J. T. Finch. 1993. J. Cell Biol. 123:1175-1184). The association of Kar1p with the spindle pole body was independent of Cdc31p. Cdc31p, on the other hand, was not associated with SPBs of kar1 cells.     

Microtubule motor protein Kar3 is required for normal mitotic division and morphogenesis in Candida albicans

The kinesin-related protein Kar3 is a minus end-directed molecular motor that plays a multifunctional role in microtubule-directed nuclear movement. Previously, it was shown that Candida albicans Kar3p is critical for nuclear fusion during mating as kar3 mutants were defective in karyogamy. In this study, we confirm that Kar3p is required for nuclear congression in mating but that neither Kar3p nor the dynein motor protein Dyn1p is required for nuclear migration in the mating projection prior to cell fusion. In addition, we show that C. albicans Kar3p plays an important role in the cell and colony morphology of mitotically dividing cells, as evidenced by diminished filamentation of kar3 cells on Spider medium and an increased tendency of mutant cells to form pseudohyphal cells in liquid culture. Loss of Kar3p also led to defects in nuclear division, causing cells to grow slowly and exhibit reduced viability compared to wild-type cells. Slow growth was due, at least in part, to delayed cell cycle progression, as cells lacking Kar3p accumulated in anaphase of the cell cycle. Consistent with a role in mitotic division, Kar3 protein was shown to localize to the spindle pole bodies. Finally, kar3 cells exhibited unstable or aberrant mitotic spindles, a finding that accounts for the delay in cell cycle progression and decreased viability of these cells. We suggest that the altered morphology of kar3 cells is a direct consequence of the delay in anaphase, and this leads to increased polarized growth and pseudohypha formation.     

The cortical localization of the microtubule orientation protein, Kar9p, is dependent upon actin and proteins required for polarization

In the yeast Saccharomyces cerevisiae, positioning of the mitotic spindle requires both the cytoplasmic microtubules and actin. Kar9p is a novel cortical protein that is required for the correct position of the mitotic spindle and the orientation of the cytoplasmic microtubules. Green fluorescent protein (GFP)- Kar9p localizes to a single spot at the tip of the growing bud and the mating projection. However, the cortical localization of Kar9p does not require microtubules (Miller, R.K., and M.D. Rose. 1998. J. Cell Biol. 140: 377), suggesting that Kar9p interacts with other proteins at the cortex. To investigate Kar9p's cortical interactions, we treated cells with the actin-depolymerizing drug, latrunculin-A. In both shmoos and mitotic cells, Kar9p's cortical localization was completely dependent on polymerized actin. Kar9p localization was also altered by mutations in four genes, spa2Delta, pea2Delta, bud6Delta, and bni1Delta, required for normal polarization and actin cytoskeleton functions and, of these, bni1Delta affected Kar9p localization most severely. Like kar9Delta, bni1Delta mutants exhibited nuclear positioning defects during mitosis and in shmoos. Furthermore, like kar9Delta, the bni1Delta mutant exhibited misoriented cytoplasmic microtubules in shmoos. Genetic analysis placed BNI1 in the KAR9 pathway for nuclear migration. However, analysis of kar9Delta bni1Delta double mutants suggested that Kar9p retained some function in bni1Delta mitotic cells. Unlike the polarization mutants, kar9Delta shmoos had a normal morphology and diploids budded in the correct bipolar pattern. Furthermore, Bni1p localized normally in kar9Delta. We conclude that Kar9p's function is specific for cytoplasmic microtubule orientation and that Kar9p's role in nuclear positioning is to coordinate the interactions between the actin and microtubule networks.     

A rapid screen for putative mislocalization mutations by using a GAL4-hybrid protein.

A GAL4 one-hybrid system was used to develop an indirect assay for intracellular localization. The Kar1 protein, a component of the yeast spindle pole body (SPB), was shown to be targeted to the SPB by electron microscopic analysis, or indirect immunofluorescence methods. To assay localization of the Kar1p by measuring the reporter gene expression on solid media, we constructed Kar1-Gal4 hybrid proteins with or without the SPB localization domain. The long fusion Kar1(299)-Gal4 with the localization domain led to non-growth on SC-His + AT media, and quite a low level of the lacZ reporter gene expression. The short fusion Kar1(107)-Gal4 without the localization domain caused a full activation of the reporter genes, HIS3 and lacZ, indicating that the protein remains in the nucleoplasm. These results suggest that the Kar1(299)-Gal4p fusion protein, localized to the SPB, can be clearly differentiated with the mislocalized protein by assaying the reporter gene expression. By utilizing the Kar1(299)-Gal4 construct, we isolated ten spontaneous mutations that were defective in the Kar1-Gal4p localization. Four of these mutations were in the same complementation group. We propose, therefore, that the Gal4-hybrid localization assay can be utilized in cases where the target organelle or the structure is too small for microscopic analysis, or in the initial screening for mutations defective in localization.     

Analysis of the kar3 Meiotic Arrest in Saccharomyces cerevisiae

The motor protein Kar3p and its associated protein Cik1p are essential for passage through meiosis I. In the absence of either protein, meiotic cells arrest in prophase I. Experiments were performed to determine whether the arrest was caused by a structural inability to proceed through meiosis, or by a regulatory mechanism. The data demonstrate that the meiotic arrest is not structural; kar3 and cik1 mutants are able to form normal looking bipolar spindles and divide their DNA into two masses in spo11 mutant backgrounds. To identify the regulatory system necessary for the kar3/cik1 meiotic arrest, we tested whether the arrest could be bypassed by eliminating the pachytene checkpoint or the spindle checkpoint. The arrest is not solely dependent upon the pachytene checkpoint that monitors recombination and aspects of chromosome synapsis. Elimination of the spindle checkpoint failed to allow kar3 mutants to undergo meiosis I nuclear division, but phenotypes of the kar3/spindle checkpoint double mutants suggest that the kar3 meiotic arrest may be mediated by the spindle checkpoint.     

Cik1 targets the minus-end kinesin depolymerase kar3 to microtubule plus ends

Kar3, a Saccharomyces cerevisiae Kinesin-14, is essential for karyogamy and meiosis I but also has specific functions during vegetative growth. For its various roles, Kar3 forms a heterodimer with either Cik1 or Vik1, both of which are noncatalytic polypeptides. Here, we present the first biochemical characterization of Kar3Cik1, the kinesin motor that is essential for karyogamy. Kar3Cik1 depolymerizes microtubules from the plus end and promotes robust minus-end-directed microtubule gliding. Immunolocalization studies show that Kar3Cik1 binds preferentially to one end of the microtubule, whereas the Kar3 motor domain, in the absence of Cik1, exhibits significantly higher microtubule lattice binding. Kar3Cik1-promoted microtubule depolymerization requires ATP turnover, and the kinetics fit a single exponential function. The disassembly mechanism is not microtubule catastrophe like that induced by the MCAK Kinesin-13s. Soluble tubulin does not activate the ATPase activity of Kar3Cik1, and there is no evidence of Kar3Cik1(.)tubulin complex formation as observed for MCAK. These results reveal a novel mechanism to regulate microtubule depolymerization. We propose that Cik1 targets Kar3 to the microtubule plus end. Kar3Cik1 then uses its minus-end-directed force to depolymerize microtubules from the plus end, with each tubulin-subunit release event tightly coupled to one ATP turnover.     

Analysis of the kar3 meiotic arrest in Saccharomyces cerevisiae

The motor protein Kar3p and its associated protein Cik1p are essential for passage through meiosis I. In the absence of either protein, meiotic cells arrest in prophase I. Experiments were performed to determine whether the arrest was caused by a structural inability to proceed through meiosis, or by a regulatory mechanism. The data demonstrate that the meiotic arrest is not structural; kar3 and cik1 mutants are able to form normal looking bipolar spindles and divide their DNA into two masses in spo11 mutant backgrounds. To identify the regulatory system necessary for the kar3/cik1 meiotic arrest, we tested whether the arrest could be bypassed by eliminating the pachytene checkpoint or the spindle checkpoint. The arrest is not solely dependent upon the pachytene checkpoint that monitors recombination and aspects of chromosome synapsis. Elimination of the spindle checkpoint failed to allow kar3 mutants to undergo meiosis I nuclear division, but phenotypes of the kar3/spindle checkpoint double mutants suggest that the kar3 meiotic arrest may be mediated by the spindle checkpoint.     

Separate domains of KAR1 mediate distinct functions in mitosis and nuclear fusion

The yeast KAR1 gene is essential for mitotic growth and important for nuclear fusion. Mutations in KAR1 prevent duplication of the spindle pole body (SPB), and affect functions associated with both the nuclear and cytoplasmic microtubules. The localization of hybrid Kar1-lacZ proteins, described elsewhere (Vallen, E. A., T. Y. Scherson, T. Roberts, K. van Zee, and M. D. Rose. 1992. Cell. In press), suggest that the protein is associated with the SPB. In this paper, we report a deletion analysis demonstrating that the mitotic and karyogamy functions of KAR1 are separate and independent, residing in discrete functional domains. One region, here shown to be essential for mitosis, coincided with a part of the protein that is both necessary and sufficient to target Karl-lacZ hybrid proteins to the SPB (Vallen, E. A., T. Y. Scherson, T. Roberts, K. van Zee, and M. D. Rose. 1992. Cell. In press). Complementation testing demonstrated that deletions in this interval did not affect nuclear fusion. A second region, required only for karyogamy, was necessary for the localization of a Kar3-lacZ hybrid protein to the SPB. These data suggest a model for the roles of Kar1p and Kar3p, a kinesin-like protein, in nuclear fusion. Finally, a third region of KAR1 was found to be important for both mitosis and karyogamy. This domain included the hydrophobic carboxy terminus and is sufficient to target a lacZ-Kar1 hybrid protein to the nuclear envelope (Vallen E. A., T. Y. Scherson, T. Roberts, K. van Zee, and M. D. Rose. 1992. Cell. In press). Altogether, the essential mitotic regions of KAR1 comprised 20% of the coding sequence. We propose a model for Kar1p in which the protein is composed of several protein-binding domains tethered to the nuclear envelope via its hydrophobic tail.     

The minus end-directed motor Kar3 is required for coupling dynamic microtubule plus ends to the cortical shmoo tip in budding yeast

The budding yeast shmoo tip is a model system for analyzing mechanisms coupling force production to microtubule plus-end polymerization/depolymerization. Dynamic plus ends of astral microtubules interact with the shmoo tip in mating yeast cells, positioning nuclei for karyogamy. We have used live-cell imaging of GFP fusions to identify proteins that couple dynamic microtubule plus ends to the shmoo tip. We find that Kar3p, a minus end-directed kinesin motor protein, is required, whereas the other cytoplasmic motors, dynein and the kinesins Kip2p and Kip3p, are not. In the absence of Kar3p, attached microtubule plus ends released from the shmoo tip when they switched to depolymerization. Furthermore, microtubules in cells expressing kar3-1, a mutant that results in rigor binding to microtubules [2], were stabilized specifically at shmoo tips. Imaging of Kar3p-GFP during mating revealed that fluorescence at the shmoo tip increased during periods of microtubule depolymerization. These data are the first to localize the activity of a minus end-directed kinesin at the plus ends of microtubules. We propose a model in which Kar3p couples depolymerizing microtubule plus ends to the cell cortex and the Bim1p-Kar9p protein complex maintains attachment during microtubule polymerization. In support of this model, analysis of Bim1p-GFP at the shmoo tip results in a localization pattern complementary to that of Kar3p-GFP.     

The ATPase Pathway That Drives the Kinesin-14 Kar3Vik1 Powerstroke

Kar3, a Saccharomyces cerevisiae microtubule minus-end-directed kinesin-14, dimerizes with either Vik1 or Cik1. The C-terminal globular domain of Vik1 exhibits the structure of a kinesin motor domain and binds microtubules independently of Kar3 but lacks a nucleotide binding site. The only known function of Kar3Vik1 is to cross-link parallel microtubules at the spindle poles during mitosis. In contrast, Kar3Cik1 depolymerizes microtubules during mating but cross-links antiparallel microtubules in the spindle overlap zone during mitosis. A recent study showed that Kar3Vik1 binds across adjacent microtubule protofilaments and uses a minus-end-directed powerstroke to drive ATP-dependent motility. The presteady-state experiments presented here extend this study and establish an ATPase model for the powerstroke mechanism. The results incorporated into the model indicate that Kar3Vik1 collides with the microtubule at 2.4 μm⁻¹ s⁻¹ through Vik1, promoting microtubule binding by Kar3 followed by ADP release at 14 s⁻¹. The tight binding of Kar3 to the microtubule destabilizes the Vik1 interaction with the microtubule, positioning Kar3Vik1 for the start of the powerstroke. Rapid ATP binding to Kar3 is associated with rotation of the coiled-coil stalk, and the postpowerstroke ATP hydrolysis at 26 s⁻¹ is independent of Vik1, providing further evidence that Vik1 rotates with the coiled coil during the powerstroke. Detachment of Kar3Vik1 from the microtubule at 6 s⁻¹ completes the cycle and allows the motor to return to its initial conformation. The results also reveal key differences in the ATPase cycles of Kar3Vik1 and Kar3Cik1, supporting the fact that these two motors have distinctive biological functions.