Optimum conditions for lipase immobilization on chitosan-coated Fe3O4 nanoparticles

Magnetic Fe₃O₄-chitosan nanoparticles are prepared by the coagulation of an aqueous solution of chitosan with Fe₃O₄ nanoparticles. The characterization of Fe₃O₄-chitosan is analyzed by FTIR, FESEM, and SQUID magnetometry. The Fe₃O₄-chitosan nanoparticles are used for the covalent immobilization of lipase from Candida rugosa using N-(3-dimethylaminopropyl)-N′-ethylcarbodiimide (EDC) and N-hydroxysuccinimide (NHS) as coupling agents. The response surface methodology (RSM) was employed to search the optimal immobilization conditions and understand the significance of the factors affecting the immobilized lipase activity. Based on the ridge max analysis, the optimum immobilization conditions were immobilization time 2.14 h, pH 6.37, and enzyme/support ratio 0.73 (w/w); the highest activity obtained was 20 U/g Fe₃O₄-chitosan. After twenty repeated uses, the immobilized lipase retains over 83% of its original activity. The immobilized lipase shows better operational stability, including wider thermal and pH ranges, and remains stable after 13 days of storage at 25 °C.     

Composites of peptide nucleic acids with ttitanium dioxide nanoparticles. I. Construction of nanocomposites containing DNA/PNA duplexes and their delivery into HeLa cells

In order to study the possibility of using titanium dioxide (TiO₂) nanoparticles to deliver peptide nucleic acids (PNA) in eukaryotic cells, a PNA oligomer was synthesized, and a method of PNA immobilization in the form of hybrid DNA/PNA duplexes on the surface of TiO₂ nanoparticles covered with polylysine (PL) was developed. The attachment of a DNA/PNA duplex to TiO₂ · PL nanoparticles occurs due to electrostatic interactions between the negatively charged DNA chain and the positively charged amino groups of PL. The binding of the PNA to the nanocomposite is achieved through noncovalent Watson-Crick interactions between PNA and complementary DNA. The capacity of the obtained TiO₂ · PL · DNA/PNA nano-composites depending on immobilization conditions was 10?C30 nmol PNA per 1 mg of TiO₂ particles, which corresponds to ??1?C3 PNA molecules per one TiO₂ particle with a size of 4?C6 nm. It was shown by confocal laser scanning microscopy that fluorescently-labeled PNA molecules in the TiO₂ · PL · DNA/^FluPNA nano-composites effectively penetrate into HeLa cells without transfection agents, electroporation, or other auxiliary procedures.     

Adsorption immobilization of Escherichia coli phytase on probiotic Bacillus polyfermenticus spores

The immobilization of enzymes on edible matrix supports is of great importance for developing stabilized feed enzymes. In this study, probiotic Bacillus spores were explored as a matrix for immobilizing Escherichia coli phytase, a feed enzyme releasing phosphate from phytate. Because Bacillus spore is inherently resistant to heat, solvents and drying, they were expected to be a unique matrix for enzyme immobilization. When mixed with food-grade Bacillus polyfermenticus spores, phytases were adsorbed to their surface and became immobilized. The amount of phytase attached was 28.2 ± 0.7 mg/g spores, corresponding to a calculated activity of 63,960 U/g spores; however, the measured activity was 41,120 ± 990.1 U/g spores, reflecting a loss of activity upon adsorption. Immobilization increased the half life (t_1/2) of the enzyme three- to ten-fold at different temperatures ranging from 60 to 90 °C. Phytase was bound to the spore surface to the extent that ultrasonication treatment was not able to detach phytases from spores. Desorption of spore-immobilized phytase was only achieved by treatment with 1 M NaCl, 10% formic acid in 45% acetonitrile, SDS, or urea, suggesting that adsorption of phytase to the spore might be via hydrophobic and electrostatic interactions. We propose here that Bacillus spore is a novel immobilization matrix for enzymes that displays high binding capacity and provides food-grade safety.     

Enhancing isomaltulose production by recombinant Escherichia coli producing sucrose isomerase: culture medium optimization containing agricultural wastes and cell immobilization

Isomaltulose is a structural isomer of sucrose commercially used in food industries. In this work, recombinant Escherichia coli producing sucrose isomerase (SIase) was used to convert sucrose into isomaltulose. To develop an economical industrial medium, untreated cane molasses (10.63 g l^?1), yeast extract (25.93 g l^?1), and corn steep liquor (10.45 g l^?1) were used as main culture compositions for SIase production. The relatively high SIase activity (14.50 ± 0.11 U mg DCW^?1) was obtained by the recombinant cells. To the best of our knowledge, this is the first investigation on SIase production by engineered E. coli using untreated cane molasses. The recombinant E. coli cells expressing the SIase gene were immobilized in calcium alginate gel in order to improve the efficiency of recycling. The immobilization was most effective with 2 % (w/v) sodium alginate and 3 % (w/v) calcium chloride. The optimal initial biomass for immobilization was 20 % (w/v, wet wt.), with a hardening time of 8 h for cell immobilization. The immobilized E. coli cells exhibited good stability for 30 batches with the productivity of 0.45 g isomaltulose g pellet^?1 h^?1. A continuous isomaltulose formation process using a column reactor remained stable for 40 days with 83 ± 2 % isomaltulose yield, which would be beneficial for economical production of isomaltulose.     

Nanoparticles facilitate gene delivery to microorganisms via an electrospray process

In this study, we developed a technique for delivering genes to microorganisms via electrospray of gold nanoparticles. During the electrospray process, charged monodisperse nano-droplets (a mixture of pET30a-GFP plasmid and nano-sized gold particles) were accelerated and deposited on a thin layer of non-competent Escherichia coli cells. Via antibiotic selection, transformed cells containing green fluorescent protein appeared on the agar plates. PCR amplification and restriction enzyme analysis further confirmed that pET30a-GFP plasmid had successfully been delivered into the non-competent E. coli cells. The transformation efficiencies were optimized under different electrospray conditions. Among several electrospray buffer solutions, CaCl₂ (0.01 M) was found to be the best for gene delivery. Furthermore, gold nanoparticles (NPs, 50 nm diameter) significantly improved plasmid transformation efficiency by 5- 7 fold (up to 2 × 10⁶ CFU/μg plasmid) compared with that obtained using naked plasmid. Electronic microscopy images and gel electrophoresis showed that the morphology of plasmids remained unchanged during the electrospray process, but cellular membrane integrity was reduced after being electrosprayed with gold NPs and CaCl₂ buffer solutions. This gene delivery method has the potential to work for many other microorganisms.     

Immobilization of soybean seed coat peroxidase on polyaniline: Synthesis optimization and catalytic properties

Soybean seed coat peroxidase (SBP) was immobilized on various polyaniline-based polymers (PANI), activated with glutaraldehyde. The most reduced polymer (PANIG₂) showed the highest immobilization capacity (8.2 mg SBP?g^?1 PANIG₂). The optimum pH for immobilization was 6.0 and the maximum retention was achieved after a 6-h reaction period. The efficiency of enzyme activity retention was 82%. When stored at 4°C, the immobilized enzyme retained 80% of its activity for 15 weeks as evidenced by tests performed at 2-week intervals. The immobilized SBP showed the same pH-activity profile as that of the free SBP for pyrogallol oxidation but the optimum temperature (55°C) was 10°C below that of the free enzyme. Kinetic analysis show that the K_m was conserved while the specific V_max dropped from 14.6 to 11.4 µmol min^?1 µg^?1, in agreement with the immobilization efficiency. Substrate specificity was practically the same for both enzymes. Immobilized SBP showed a greatly improved tolerance to different organic solvents; while free SBP lost around 90% of its activity at a 50% organic solvent concentration, immobilized SBP underwent only 30% inactivation at a concentration of 70% acetonitrile. Taking into account that immobilized HRP loses more than 40% of its activity at a 20% organic solvent concentration, immobilized SBP performed much better than its widely used counterpart HRP.     

Photo-catalytic preparation of silver-coated TiO2 particles for antibacterial applications

Colloidal silver has been known to have unique antimicrobial activity that may be useful in the construction of antibacterial materials (self-cleaning materials) to aid in the fight against bacteria-related infections. In this study, silver-coated TiO₂ (Ag/TiO₂) particles prepared through the photo-reduction of Ag⁺ were investigated as an antibacterial agent against Escherichia coli and Staphylococcus aureus. The deposition of Ag onto the surface was confirmed with SEM and EDS analysis of the post-reaction particles. It was also determined that the initial concentration of Ag⁺ in solution played a significant role in the effective size of the post-irradiation particles. The antibacterial effectiveness of the Ag/TiO₂ was evaluated through the determination of the minimum inhibitory concentration (MIC) of AgTiO₂ for each species of bacteria. The MIC values for the Ag/TiO₂, on both E. coli and S. aureus, were much lower than the MIC values for Ag metal, and quite comparable to the MIC values for AgNO₃. A disc diffusion/antibiotic sensitivity test was also performed using the Ag/TiO₂ particles and the results compared with the results obtained for Ag metal, AgNO₃ and common antibacterial agents; tetracycline, chloramphenicol, erythromycin, and neomycin. The zone of inhibition diameters for the Ag/TiO₂ particles were found to be comparable with those of the other antimicrobial agents.     

Improving the activity and stability of Yarrowia lipolytica lipase Lip2 by immobilization on polyethyleneimine-coated polyurethane foam

In this study, polyurethane foam (PUF) was used for immobilization of Yarrowia lipolytica lipase Lip2 via polyethyleneimine (PEI) coating and glutaraldehyde (GA) coupling. The activity of immobilized lipases was found to depend upon the size of the PEI polymers and the way of GA treatment, with best results obtained for covalent-bind enzyme on glutaraldehyde activated PEI-PUF (MW 70,000 Da), which was 1.7 time greater activity compared to the same enzyme immobilized without PEI and GA. Kinetic analysis shows the hydrolytic activity of both free and immobilized lipases on triolein substrate can be described by Michaelis–Menten model. The K_m for the immobilized and free lipases on PEI-coated PUF was 58.9 and 9.73 mM, respectively. The V_max values of free and immobilized enzymes on PEI-coated PUF were calculated as 102 and 48.6 U/mg enzyme, respectively. Thermal stability for the immobilization preparations was enhanced compared with that for free preparations. At 50 °C, the free enzyme lost most of its initial activity after a 30 min of heat treatment, while the immobilized enzymes showed significant resistance to thermal inactivation (retaining about 70% of its initial activity). Finally, the immobilized lipase was used for the production of lauryl laurate in hexane medium. Lipase immobilization on the PEI support exhibited a significantly improved operational stability in esterification system. After re-use in 30 successive batches, a high ester yield (88%) was maintained. These results indicate that PEI, a polymeric bed, could not only bridge support and immobilized enzymes but also create a favorable micro-environment for lipase. This study provides a simple, efficient protocol for the immobilization of Y. lipolytica lipase Lip2 using PUF as a cheap and effective material.     

Urea denaturation of the immobilized proteases of Streptomyces griseus (pronase)

The protease preparation (pronase, EC 3.4. group) from Streptomyces griseus has been covalently immobilized on porous succinamidopropyl glass using a carbodiimide carboxyl activation procedure. The separate activities of the individual proteases in this preparation were assayed using specific synthetic substrates. Stabilities of both soluble and immobilized preparations were determined and compared by assaying for each activity in urea solutions of various concentration. The loss of activity by the immobilized enzymes was shown to be reversible under most conditions. Analysis of the data in terms of a two-state transition showed that the urea concentration resulting in 50% loss of activity was increased for each enzyme as a result of immobilization. Also the m-value in the relation ΔG_D = ΔG^H₂O_D - m[urea] decreased for each enzyme upon immobilization. Thus, all of the enzymes were stabilized by immobilization and the apparent broadening of the transitions, as measured by the decreased m-value, was interpreted as the formation of a population of molecules with different stabilities. The degree of apparent stabilization upon immobilization varied with the magnitude decreasing as: aminopeptidases > carboxypeptidase ? trypsin > proteases A and B. Furthermore, it is suggested that stabilization may result from multipoint attachment since the magnitude was correlated with the number of potential enzyme reaction sites as reflected by their lysine contents.     

Characterization and optimization of β-galactosidase immobilization process on a mixed-matrix membrane

β-Galactosidase is an important enzyme catalyzing not only the hydrolysis of lactose to the monosaccharides glucose and galactose but also the transgalactosylation reaction to produce galacto-oligosaccharides (GOS). In this study, β-galactosidase was immobilized by adsorption on a mixed-matrix membrane containing zirconium dioxide. The maximum β-galactosidase adsorbed on these membranes was 1.6 g/m², however, maximal activity was achieved at an enzyme concentration of around 0.5 g/m². The tests conducted to investigate the optimal immobilization parameters suggested that higher immobilization can be achieved under extreme parameters (pH and temperature) but the activity was not retained at such extreme operational parameters. The investigations on immobilized enzymes indicated that no real shift occurred in its optimal temperature after immobilization though the activity in case of immobilized enzyme was better retained at lower temperature (5 °C). A shift of 0.5 unit was observed in optimal pH after immobilization (pH 6.5 to 7). Perhaps the most striking results are the kinetic parameters of the immobilized enzyme; while the Michaelis constant (K_m) value increased almost eight times compared to the free enzyme, the maximum enzyme velocity (V_max) remained almost constant.     

Stabilization of thymidine phosphorylase from Escherichia coli by immobilization and post immobilization techniques

Homodimeric thymidine phosphorylase from Escherichia coli (TP, E.C. 2.4.2.4) was immobilized on solid support with the aim to have a stable and recyclable biocatalyst for nucleoside synthesis. Immobilization by ionic adsorption on amine-functionalized agarose and Sepabeads^® resulted in a very high activity recovery (>85%). To prevent undesirable leakage of immobilized enzyme away from the support, the ionic preparations were cross-linked with aldehyde dextran (MW 20 kDa) and the influence of the dextran oxidation degree on the resulting biocatalyst activity was evaluated. Although in all cases the percentage of expressed activity after immobilization drastically decreased (≤25%), this procedure allowed to obtain an active catalyst which resulted up to 6-fold and 3-fold more stable than the soluble (non immobilized) enzyme and the just adsorbed (non cross-linked) counterpart, respectively, at pH 10 and 37 °C. No release of the enzyme from the support could be observed. Covalent immobilization on aldehyde or epoxy supports was generally detrimental for enzyme activity. Optimal TP preparation, achieved by immobilization onto Sepabeads^® coated with polyethyleneimine and cross-linked, was successfully used for the one-pot synthesis of 5-fluoro-2′-deoxyuridine starting from 2′-deoxyuridine or thymidine (20 mM) and 5-fluorouracil (10 mM). In both cases, the reaction proceeded at the same rate (3 μmol min⁻¹) affording 62% conversion in 1 h.     

Isomaltulose production from sucrose by Protaminobacter rubrum immobilized in calcium alginate

Different culture conditions for Protaminobacter rubrum and enzymatic reaction parameters were evaluated with the goal of improving isomaltulose production. P. rubrum was grown in a medium with 1% (w/v) cane molasses and 0.5% yeast extract and achieved a maximum cell yield Y_x/s of 0.295 g of cells/g sucrose and a specific growth rate (μ) of 0.192 h⁻¹. The immobilization of P. rubrum cells was carried out with calcium alginate, glutaraldehyde and polyethyleneimine. Stabile immobilized cell pellets were obtained and used 24 times in batch processes. Enzymatic conversion was carried out at different sucrose concentrations and in pH 6 medium with 70% (w/v) sucrose at 30 °C an isomaltulose yield of 89–94% (w/v) was obtained. The specific activity of the P. rubrum immobilized pellets in calcium alginate at 30 °C ranged from 1.6 to 4.0 g isomaltulose g⁻¹ pellet h⁻¹, respectively with 70% and 65% sucrose solution, while in lower sucrose concentration had higher specific activities presumably due to substrate inhibition of the isomaltulose synthase in higher sucrose concentrations.     

IMMOBILIZATION OF CARBONIC ANHYDRASE ENZYME PURIFIED FROM Bacillus subtilis VSG-4 AND ITS APPLICATION AS CO2 SEQUESTERER

The purification, immobilization, and characterization of carbonic anhydrase (CA) secreted by Bacillus subtilis VSG-4 isolated from tropical soil have been investigated in this work. Carbonic anhydrase was purified using ammonium sulfate precipitation, Sephadex-G-75 column chromatography, and DEAE-cellulose chromatography, achieving a 24.6-fold purification. The apparent molecular mass of purified CA obtained by SDS-PAGE was found to be 37 kD. The purified CA was entrapped within a chitosan–alginate polyelectrolyte complex (C-A PEC) hydrogel for potential use as an immobilized enzyme. The optimum pH and temperature for both free and immobilized enzymes were 8.2 and 37°C, respectively. The immobilized enzyme had a much higher storage stability than the free enzyme. Certain metal ions, namely, Co²⁺, Cu²⁺, and Fe³⁺, increased the enzyme activity, whereas CA activity was inhibited by Pb²⁺, Hg²⁺, ethylenediamine tetraacetic acid (EDTA), 5,5′-dithiobis-(2-nitrobenzoic acid (DTNB), and acetazolamide. Free and immobilized CAs were tested further for the targeted application of the carbonation reaction to convert CO₂ to CaCO₃. The maximum CO₂ sequestration potential was achieved with immobilized CA (480 mg CaCO₃/mg protein). These properties suggest that immobilized VSG-4 carbonic anhydrase has the potential to be used for biomimetic CO₂ sequestration.     

One-step immobilization and purification of genetic engineering CBD fusion EndoS on cellulose for antibodies Fc-glycan remodeling

The endoglycosidase (EndoS and its glycosynthase mutants D233A, D233Q) gene was fused with cellulose binding domain (CBD) using pET-35b vector and the fusion enzymes were successfully expressed in Escherichia coli. Then a simplified approach for one-step immobilization and purification of EndoS enzymes using cellulose as matrices were developed and excellent loading efficiency (81–90%) was achieved in optimal condition. The cellulose immobilized CBD-EndoS and the glycosynthase mutants presented high catalytic activity and were successfully applied in a two-step antibody Fc N-glycan remodeling, generating a therapeutic antibody with homogeneous glycoform in high efficiency. The cellulose immobilized CBD-EndoS and its mutants (D233A and D233Q) displayed excellent storage stability when stored at 4 degrees for one month. Reusability studies demonstrated that the cellulose immobilized CBD-EndoS and its mutants could be recycled for five times without obvious activity loss.     

Biocatalysis with immobilized Escherichia coli

Immobilization is one of the great tools for developing economically and ecologically available biocatalysts and can be applied for both enzymes and whole cells. Much research dealing with the immobilization of Escherichia coli has been published in the past two decades. E. coli in the form of immobilized biocatalyst catalyzes many interesting reactions and has been used mainly in laboratories, but also on an industrial scale, leading to the production of valuable substances. It has the potential to be applied in many fields of modern biotechnology. This paper aims to give a general overview of immobilization techniques and matrices suitable mostly for entrapment, encapsulation, and adsorption, which have been most frequently used for the immobilization of E. coli. An extensive analysis reviewing the history and current state of immobilized E. coli catalyzing different types of biotransformations is provided. The review is organized according to the enzymes expressed in immobilized E. coli, which were grouped into main enzyme classes. The industrial applications of immobilized E. coli biocatalyst are also discussed.     

Preparation of active corn peptides from zein through double enzymes immobilized with calcium alginate–chitosan beads

Double enzymes (alcalase and trypsin) were effectively immobilized in a composite carrier (calcium alginate–chitosan) to produce immobilized enzyme beads referred to as ATCC. The immobilization conditions for ATCC were optimized, and the immobilized enzyme beads were characterized. The optimal immobilization conditions were 2.5% of sodium alginate, 10:4 sodium alginate to the double enzymes, 3:7 chitosan solution to CaCl₂ and 2.5 h immobilization time. The ATCC beads had greatly enhanced stability and good usability compared with the free form. The ATCC residual activity was retained at 88.9% of DH (degree of hydrolysis) after 35 days of storage, and 36.0% of residual activity was retained after three cycles of use. The beads showed a higher zein DH (65.8%) compared with a single enzyme immobilized in the calcium alginate beads (45.5%) or free enzyme (49.3%). The ATCC kinetic parameters V_max and apparent K_m were 32.3 mL/min and 456.62 g⁻¹, respectively. Active corn peptides (CPs) with good antioxidant activity were obtained from zein in the ethanol phase. The ATCC might be valuable for preparing CPs and industrial applications.     

Green synthesis and structural classification of Acacia nilotica mediated-silver doped titanium oxide (Ag/TiO2) spherical nanoparticles: Assessment of its antimicrobial and anticancer activity

Current exanimation reports, green fabrication of silver doped TiO₂ nanoparticles (Ag/TiO₂) using aqueous extract of Acacia nilotica as bio-reductant and assess its potential as antimicrobial and anticancer agent. The obtained spherical Ag/TiO₂ were characterized by various analytical techniques including FTIR, (XRD), (FE-SEM EDS), and (TEM). Synthesized Ag/TiO₂ demonstrated broad spectrum antibacterial and anticandidal activity. The order of antimicrobial activity was found to be E. coli > C. albicans > MRSA > P. aeruginosa. In addition, cytotoxicity and oxidative stress of Ag/TiO₂ nanoparticles in (MCF-7) cells was also investigated. Outcomes of MTT assay showed concentration dependent reduction in cell viability. Further, synthesized NPs reduced the level of glutathione, induced ROS generation and lipid peroxidation in the treated cells. Therefore, it is envisaged that these spherical nanoparticles may be exploited in drug delivery, pharmaceutical, and food industry.     

Bacteriophage-based biosorbents coupled with bioluminescent ATP assay for rapid concentration and detection of Escherichia coli

Wild type T4 bacteriophage and recombinant T4 bacteriophages displaying biotin binding peptide (BCCP) and cellulose binding module (CBM) on their heads were immobilized on nano-aluminum fiber-based filter (Disruptor™), streptavidin magnetic beads and microcrystalline cellulose, respectively. Infectivity of the immobilized phages was investigated by monitoring the phage-mediated growth inhibition of bioluminescent E. coli B and cell lysis using bioluminescent ATP assay. The results showed that phage immobilization resulted in a partial loss of infectivity as compared with the free phage. Nevertheless, the use of a biosorbent based on T4 bacteriophage immobilized on Disruptor™ filter coupled with a bioluminescent ATP assay allowed simultaneous concentration and detection of as low as 6 × 10³ cfu/mL of E. coli in the sample within 2 h with high accuracy (CV = 1-5% in log scale). Excess of interfering microflora at levels 60-fold greater than the target organism did not affect the results when bacteriophage was immobilized on the filter prior to concentration of bacterial cells.     

Functional characterization of starvation-induced lysosomal activity in Saccharomyces cerevisiae

Starvation induces significant alterations in lysosomal enzymes, and reduced concentrations of glucose increases the activity of several lysosomal enzymes. Therefore, to evaluate the lysosomal antimicrobial activity under starvation conditions, we added 0, 5, 10, 20, or 40 g/l of glucose (0%, 0.5%, 1%, 2%, or 4% glucose) supplemented YP medium to cultured Saccharomyces cerevisiae, and lysosomal fractions were isolated from S. cerevisiae grown under the various culture conditions. The lysosomes isolated from each condition exhibited increased antimicrobial activity against Escherichia coli as determined by a decrease in glucose concentration. In addition, a starvation-dependent increase in lysosomal activity coincided with increased lysosome intensity at the cytosol and distinct protein expression from lysosomes in S. cerevisiae. It also was determined found that the lysosomes have antimicrobial activity against seven different microorganisms, including E. coli, and starvation-induced lysosomes showed enhanced antimicrobial activity compared to those from normal lysosomes. These results suggest the possibility that lysosomal alterations during starvation may induce conditions that activate lysosomes for future development of efficient antimicrobial agents.