Synthesis and characterization of novel guar gum hydrogels and their use as Cu sorbents

To prepare novel hydrogels for use in water technologies, guar gum was subjected to acid hydrolysis. The depolymerized guar gum obtained there from and the native guar gum were oxidized to their respective polycarboxylic forms using NO_x as oxidant. All these polymers were crosslinked with N,N-methylenebisacrylamide, and were used as Cu²⁺ sorbents. The candidate hydrogel exhibiting the highest uptake was used further to investigate the effect of external stimuli on sorption. The sorption on hydrogels was fast as the highest sorption was observed after 2 h at 40 °C and 20 ppm of Cu²⁺ ions. The hydrogel prepared from the oxidized guar gum afforded the maximum sorption capacity of 125.893 mg g⁻¹. Langmuir and Freundlich isotherms, and pseudo second order kinetics matches the experimental data. The evidence of sorption was obtained by characterizing Cu²⁺-loaded hydrogels by FTIR spectroscopy.     

New water resistant biomaterial biocide film based on guar gum

This work was aimed to develop water resistant biocide film from renewable resources for applications in food and water technology. Guar gum, a polymeric galactomannan, was intrinsically modified to a new guar gum benzamide. Benzoylation was carried out by benzoyl chloride reaction in water medium and a propyl amine spacer was used to impart a high degree of hydrophobicity. The new guar gum benzamide was resistant to water and soluble in non aqueous solvent like dimethyl sulfoxide. Cast films of thickness 0.162 mm had a breaking point tensile strength of 21.95 Mpa. The water vapor permeability of biomaterial film was 0.28 g mm kPa⁻¹ h⁻¹ m⁻² and water contact angle on evaporative surface was 90.35 degree. Qualitative and quantitative biocide activity of film was established against Salmonella enterica, Escherichia coli, Staphylococcus aureus and Bacillus subtilis. The new guar gum benzamide absorbed strongly in UV region.     

The Salmonella enterica ZinT structure,zinc affinity and interaction with the high-affinity uptake protein ZnuA provide insight into the management of periplasmic zinc

Background

In Gram-negative bacteria the ZnuABC transporter ensures adequate zinc import in Zn(II)-poor environments, like those encountered by pathogens within the infected host. Recently, the metal-binding protein ZinT was suggested to operate as an accessory component of ZnuABC in periplasmic zinc recruitment. Since ZinT is known to form a ZinT–ZnuA complex in the presence of Zn(II) it was proposed to transfer Zn(II) to ZnuA. The present work was undertaken to test this claim.

Methods

ZinT and its structural relationship with ZnuA have been characterized by multiple biophysical techniques (X-ray crystallography, SAXS, analytical ultracentrifugation, fluorescence spectroscopy).

Results

The metal-free and metal-bound crystal structures of Salmonella enterica ZinT show one Zn(II) binding site and limited structural changes upon metal removal. Spectroscopic titrations with Zn(II) yield a K_D value of 22 ± 2 nM for ZinT, while those with ZnuA point to one high affinity (K_D < 20 nM) and one low affinity Zn(II) binding site (K_D in the micromolar range). Sedimentation velocity experiments established that Zn(II)-bound ZinT interacts with ZnuA, whereas apo-ZinT does not. The model of the ZinT–ZnuA complex derived from small angle X-ray scattering experiments points to a disposition that favors metal transfer as the metal binding cavities of the two proteins face each other.

Conclusions

ZinT acts as a Zn(II)-buffering protein that delivers Zn(II) to ZnuA.

General significance

Knowledge of the ZinT–ZnuA relationship is crucial for understanding bacterial Zn(II) uptake.     

The Metalloregulatory Zinc Site in Streptococcus pneumoniae AdcR, a Zinc-activated MarR Family Repressor

Streptococcus pneumoniae D39 AdcR (adhesin competence repressor) is the first metal-sensing member of the MarR (multiple antibiotic resistance repressor) family to be characterized. Expression profiling with a ΔadcR strain grown in liquid culture (brain-heart infusion) under microaerobic conditions revealed upregulation of 13 genes, including adcR and adcCBA, encoding a high-affinity ABC uptake system for zinc, and genes encoding cell-surface zinc-binding pneumococcal histidine triad (Pht) proteins and AdcAII (Lmb, laminin binding). The ΔadcR, H108Q and H112Q adcR mutant allelic strains grown in 0.2 mM Zn(II) exhibit a slow-growth phenotype and an approximately twofold increase in cell-associated Zn(II). Apo- and Zn(II)-bound AdcR are homodimers in solution and binding to a 28-mer DNA containing an adc operator is strongly stimulated by Zn(II) with K_DNA-Zn = 2.4 × 10⁸ M^- 1 (pH 6.0, 0.2 M NaCl, 25 °C). AdcR binds two Zn(II) per dimer, with stepwise Zn(II) affinities K_Zn1 and K_Zn2 of ≥ 10⁹ M^- 1 at pH 6.0 and ≥ 10¹² M^- 1 at pH 8.0, and one to three lower affinity Zn(II) depending on the pH. X-ray absorption spectroscopy of the high-affinity site reveals a pentacoordinate N/O complex and no cysteine coordination, the latter finding corroborated by wild type-like functional properties of C30A AdcR. Alanine substitution of conserved residues His42 in the DNA-binding domain, and His108 and His112 in the C-terminal regulatory domain, abolish high-affinity Zn(II) binding and greatly reduce Zn(II)-activated binding to DNA. NMR studies reveal that these mutants adopt the same folded conformation as dimeric wild type apo-AdcR, but fail to conformationally switch upon Zn(II) binding. These studies implicate His42, His108 and H112 as metalloregulatory zinc ligands in S. pneumoniae AdcR.     

Structural analysis of galactomannans by NMR spectroscopy

The structure of naturally occurring galactomannans was characterized by high resolution NMR spectroscopy involving two-dimensional (2D) NMR measurements of the field gradient DQF-COSY, HMQC, HMBC, and ROESY experiments. Four galactomannans with different proportions of galactose (G) and mannose (M), from fenugreek gum (FG), guar gum (GG), tara gum (TG), and locust bean gum (LG), were investigated. Because these galactomannans had very high molecular weights, hydrolysis by dilute H₂SO₄ was carried out to give the corresponding low molecular weight galactomannans, the structural identities of which were established by comparison of the specific rotations, shape of the GPC profiles, and NMR spectra with those of higher molecular weight galactomannans. The correlation signals GH1-GC4, -GC5, and -MC6 in HMBC and GH1-GH6 in ROESY spectra of FG showed that more than two galactopyranose units with the 1 → 4 linkage were connected at C6 of the mannopyranose main chain. The coupling constant (J_H1,2) of galactose was 3.4 Hz, indicating that galactose has an α-linkage. The main chain mannose was found to connect through the 1 → 4 linkage, because of the appearance of the correlation signals MH1-MC4, and MC1-MH4 in the HMBC spectrum due to the long-range correlation signals between two neighboring mannopyranose residues through the M4-O-M1 bond. Although the main chain mannose J_H1,2 was not observed, probably because of the high molecular weight, the specific rotation of LG with a higher proportion of mannose was low, [α]_D²⁵ = +10.8°, compared with that of FG with a lower proportion of mannose, [α]_D²⁵ = +90.5°, suggesting that the mannose in the main chain had a α-linkage. These results suggest that the galactomannans comprise a (1 → 4)-β-mannopyranosidic main chain connected with more than two (1 → 4)-α-galactopyranosidic side chains, in addition to the single galactopyranose side chain, at C6 of the mannopyranose main chain.     

Characterization of magnetic guar gum-grafted carbon nanotubes and the adsorption of the dyes

The hydrophobicity of carbon nanotubes (CNTs) limits their extensive application. The hydrophilicity and biocompatibility of CNTs can be improved by modifying them with biopolymers. As a natural biopolymer, guar gum (GG) was covalently grafted on the surfaces of multiwall carbon nanotube (MWCNT) to obtain GG-MWCNT composite. Then iron oxide nanoparticles were synthesized on the GG-MWCNT to prepare the magnetic GG-MWCNT-Fe₃O₄. The obtained nanocomposites were characterized by Fourier transform infrared spectroscopy, thermogravimetric analysis, transmission electron microscopy, ultraviolet-visible (UV-vis) spectroscopy and X-ray diffraction. GG-MWCNT was composed of about 21.6 wt% GG components, which enhanced the dispersion of GG-MWCNT in aqueous solution and also acted as a template for growth of iron oxide nanoparticles. GG-MWCNT-Fe₃O₄ exhibited superparamagnetic with a saturation magnetization (13.3 emu g⁻¹), and good adsorption on neutral red and methylene blue. GG-MWCNT-Fe₃O₄ could be easily separated from the aqueous solution in a magnetic field.     

Nonlinear modelisation of heavy metal removal from aqueous solution using Ulva lactuca algae

After extensive analysis, Ulva lactuca dried algae, collected from the Monastir coastal zone, was proven to be successful as an adsorbent for the removal of certain inorganic pollutants. The main objective of this study was the nonlinear modeling of heavy metal removal from an aqueous solution, using a freely available and well analyzed biomaterial, as well as the evaluation of its efficacy on various metal ion sorptions. Although relatively low specific surface area, compared to more conventional adsorbents, the selected biomaterial displays very interesting retention capacities when used with aqueous inorganic pollutants. The pseudo, first and second-order kinetic models were used to investigate the kinetic retention mechanism. Assuming the nonlinear form, the results indicate that the retention mechanism is diffusion controlled. Concerning the heavy metal uptake capacity, it was found that the selected biomaterial has a retention capacity of 67 mg g⁻¹ of Ni(II), 112 mg g⁻¹ of Cu(II), 127 mg g⁻¹of Cd(II) and 230 mg g⁻¹ of Pb(II).     

Supramolecular zinc(II)salphen motifs: Reversible dimerization and templated dimeric structures

The formation of a dimeric structure of a nonsymmetric Zn(II)salphen complex is reported. The X-ray molecular structure show the formation of an oxygen-bridged species (2). In addition to this structure, a pyridine-ligated complex and an 1:2 dabco/Zn(II)salphen supramolecular assembly (dabco = diazabicyclo[2.2.2]octane) are presented. Their coordination behavior has been studied and can be correlated with the substitution pattern of the salphen ligand and the donor-strength of the involved axial ligands. The Zn(II)salphen building blocks bind in a cooperative fashion to the dabco template, the second unit being bound 4 times more strongly.     

Variations in the coordination environment of Co, Cu and Zn complexes prepared from a tridentate (imino)pyridine ligand and their structural comparisons

The variations in the coordination environment of Co(II), Cu(II) and Zn(II) complexes with the neutral, tridentate ligand bis[1-(cyclohexylimino)ethyl]pyridine (BCIP) are reported. Analogous syntheses were carried out utilizing either the M(BF₄)₂ · xH₂O or MCl₂ · xH₂O metal salts (where M = Co(II), Cu(II) or Zn(II)) with one equivalent of BCIP. When the hydrated metal starting material was used, cationic, octahedral complexes of the type [M(BCIP)₂]²⁺ were isolated as the tetrafluoroborate salt (4, 5). Conversely, when the hydrated chloride metal salt was used as the starting material, only neutral, pentacoordinate [M(BCIP)Cl₂] complexes (1-3) formed. All complexes were characterized by X-ray diffraction studies. The three complexes that are five coordinate have distortions due mainly to the pyridine di-imine bite angle. The [Cu(BCIP)Cl₂] (2) also exhibits deviations in the Cu(II)-Cl bond distances with values of 2.4242(9) and 2.2505(9) Å, which are not seen in the analogous Zn(II) and Co(II) structures. Similarly, the two six coordinate complexes (5, 6) are also altered by the ligand frame bite angle giving rise to distorted octahedral geometries in each complex. The [Cu(BCIP)₂](BF₄)₂ (6) also exhibits Cu(II)-N_imine bond lengths that are on average 0.14 Å longer than those found in the analogous 5 coordinate complex, [Cu(BCIP)Cl₂]. In addition to X-ray analysis, all complexes were also characterized by UV/Vis and IR spectroscopy with ¹H NMR spectroscopy being used for the analysis of the Zn(II) analogue (3).     

Using lignimerin (a recovered organic material from Kraft cellulose mill wastewater) as sorbent for Cu and Zn retention from aqueous solutions

Adsorption of copper and zinc in lignimerin (an organic material mainly composed by lignin, carbohydrate fragments and some extractives) and its acid derivative (H-lignimerin), recovered from Kraft cellulose mill wastewater was examined. A Box–Behnken experiment design, used to optimize lignimerin recovery process, revealed that the type of solvent used for precipitation is a determining factor in the amount of substance obtained. Conversely, batch adsorption studies at pH 4.0 revealed that the maximum adsorption capacities, modeled by the Langmuir equation, were 666.7 and 370.4 mmol kg⁻¹ for Cu(II) and Zn(II), respectively in lignimerin and 232.6 and 312.5 mmol kg⁻¹ for Cu(II) and Zn(II), respectively in H-lignimerin. The adsorption of Cu(II) and Zn(II) through deprotonated hydroxyl and carboxylic groups was the dominant mechanism that may explain the adsorption in both materials. The adsorption capacities indicated that lignimerin, with a molecular mass between 50 and 70 kDa, has a potential use as an organic sorbent for removing copper and zinc from liquid resources.     

Controlled release of tamoxifen citrate encapsulated in cross-linked guar gum nanoparticles

Natural polysaccharides, due to their outstanding merits, have received more and more attention in the field of drug delivery. In the present study tamoxifen citrate, TMX (a non-steroidal antiestrogenic drug) loaded guar gum nanoparticles, GG NPs, crosslinked with glutaraldehyde were prepared for treatment of breast cancer. An oil in water (o/w) emulsion polymer cross-linking method was employed for preparation of blank and drug loaded sustained release nature biodegradable nanoparticles. Prepared nanoparticles were characterized by morphology in scanning electron microscope (SEM), size distribution in transmission electron microscope (TEM), TMX loading by high performance liquid chromatography (HPLC) and in vitro drug release characteristics. An overall sustained release of the drug from the biodegradable nanoparticles was observed in in vitro release studies. The release of TMX from GG NPs was found to be effected by guar gum and glutaraldehyde concentration. Regression coefficient (R²) analysis suggested that the predominant mechanism behind the drug release from the nanoparticles was time dependent release and diffusion. In vivo studies on female albino mice demonstrated maximum uptake of the drug by mammary tissue after 24 h of administration with drug loaded guar gum nanoparticles in comparison with that with the tablet form of the drug. These findings demonstrate that controlled release of TMX from GG NPs could be a potential alternative pharmaceutical formulation in passive targeting of TMX in breast cancer treatments.     

Evaluation and elimination of inhibitory effects of salts and heavy metal ions on biodegradation of Congo red by Pseudomonas sp. mutant

In this study, it was attempted to evaluate the influences and also recommended some elimination methods for inhibitory effects offered by salts and heavy metal ions. Congo red dye solution treated with mutant Pseudomonas sp. was taken as a model system for study. The salts used in this study are NaCl, CaCl₂ and MgSO₄·7H₂O. Though the growth was inhibited at concentrations above 4 g/l, toleration was achieved by acclimatization process. In case of heavy metal ions, Cr (VI) showed low inhibition up to 500 mg/l of concentration, compared to Zn (II) and Cu (II). It was due to the presence of chromium reductase enzyme which was confirmed by SDS-PAGE. Zn (II) and Cu (II) ion inhibitions were eliminated by chelation with EDTA. The critical ion concentrations obtained as per Han-Levenspiel model for Cr (VI), Zn (II) and Cu (II) were 0.8958, 0.3028 and 0.204 g/l respectively.     

Chitin nanofibrils for rapid and efficient removal of metal ions from water system

Joint mechanical defibrillation was successfully used to downsize chitin micro-particles (CMP) into nanofibrils without changing its chemical or crystalline structure. The fine chitin nanofibrils (CNF) bearing width of about 50 nm and length of more than 1 μm were then developed as heavy metal ion sorbents. The uptake performance of CNF dependent on pH, ionic concentration, time, and temperature was investigated. Results show that fixation amount of Cd(II), Ni(II), Cu(II), Zn(II), Pb(II), Cr(III) on CNF was up to 2.94, 2.30, 2.22, 2.06, 1.46, and 0.31 mmol/g, respectively, much higher than CMP due to high specific surface area and widely distributed pores of CNF. Adsorption kinetics of CMP and CNF followed pseudo-second-order model and Freundlich isotherm although CNF exhibited higher rate constant and sorption capacity than that of CMP. The defibrillated CNF is renewable, feasible, easily recyclable, and is thought as good candidate for heavy metal ion treatment due to their low sorption energy, rapid and efficient uptake capacity.     

Polymer hydrogel from carboxymethyl guar gum and carbon nanotube for sustained trans-dermal release of diclofenac sodium

Novel carboxymethyl guar gum (CMG)-chemically modified multiwalled carbon nanotube (MCNT) hybrid hydrogels were synthesized at different MCNT levels as potential device for sustained trans-dermal release of diclofenac sodium. Spectroscopy together with morphology, thermogravimetry, and rheological studies proved relatively strong CMG-MCNT interaction at 0.5 and 1 wt% levels of MCNT whereas de-wetting was increased with higher MCNT concentration. Drug encapsulation tendency increased with addition of MCNT; maximum entrapment was noticed at 1 wt% MCNT level. Hydrogels containing 0.5, 1 and 3 wt% MCNT exhibited slower trans-dermal release than neat CMG due to slightly higher gel viscosity and more drug entrapment. Slowest but steady release was obtained from 1 wt% MCNT loaded hydrogel due to highest viscous resistance among all other hybrid nanocomposites.     

Adsorption of copper and zinc by biochars produced from pyrolysis of hardwood and corn straw in aqueous solution

Biochars produced by pyrolysis of hardwood at 450 °C (HW450) and corn straw at 600 °C (CS600) were characterized and investigated as adsorbents for the removal of Cu(II) and Zn(II) from aqueous solution. The adsorption data were well described by a Langmuir isotherm, with maximum Cu(II) and Zn(II) adsorption capacities of 12.52 and 11.0 mg/g for CS600, 6.79 and 4.54 mg/g for HW450, respectively. Thermodynamic analysis suggested that the adsorption was an endothermic process and did not occur spontaneously. Although Cu(II) adsorption was only marginally affected by Zn(II), Cu(II) competed with Zn(II) for binding sites at Cu(II) and Zn(II) concentrations ?1.0 mM. Results from this study indicated that plant-residue or agricultural waste derived biochar can act as effective surface sorbent, but their ability to treat mixed waste streams needs to be carefully evaluated on an individual basis.     

Irradiation depolymerized guar gum as partial replacement of gum Arabic for microencapsulation of mint oil

Spray dried microcapsules of mint oil were prepared using gum Arabic alone and its blends with radiation or enzymatically depolymerized guar gum as wall materials. Microcapsules were evaluated for retention of mint oil during 8-week storage during which qualitative changes in encapsulated mint oil was monitored using principal component analysis. The microcapsules with radiation depolymerized guar gum as wall material component could better retain major mint oil compounds such as menthol and isomenthol. The t(1/2) calculated for mint oil in microcapsules of gum Arabic, gum Arabic:radiation depolymerized guar gum (90:10), gum Arabic:enzyme depolymerized guar gum (90:10) was 25.66, 38.50, and 17.11 weeks, respectively. The results suggested a combination of radiation depolymerized guar gum and gum Arabic to show better retention of encapsulated flavour than gum Arabic alone as wall material.     

Expression and function of PEPT2 during transdifferentiation of alveolar epithelial cells

Aims

The purpose of this study was to clarify the expression and function of peptide transporter 2 (PEPT2) in primary cultured alveolar type II epithelial cells and in transdifferentiated type I-like cells.

Main methods

Real-time PCR analysis, uptake study of [³H]Gly-Sar, and immunostaining were performed in alveolar epithelial cells.

Key findings

The expression of PEPT2 mRNA in type II cells isolated from rat lungs was highest at day 0, and decreased rapidly during culture of the cells. In accordance with this change, PEPT2 activity estimated as cefadroxil-sensitive [³H]Gly-Sar uptake also decreased along with transdifferentiation. The expression of PEPT2 protein in type II cells was confirmed by immunostaining and Western blot analysis. The uptake of [³H]Gly-Sar in type II cells was time- and pH-dependent. In contrast, minimal time-dependence and no pH-dependence of [³H]Gly-Sar uptake were observed in type I-like cells. The maximal [³H]Gly-Sar uptake was observed at pH 6.0, and the uptake decreased at higher pHs in type II cells. The uptake of [³H]Gly-Sar in type II cells was inhibited by cefadroxil in a concentration-dependent manner, the IC₅₀ value being 4.3 μM. On the other hand, no significant inhibition by cefadroxil was observed in type I-like cells. In addition, [³H]Gly-Sar uptake in type II cells was saturable, the Km value being 72.0 μM.

Significance

PEPT2 is functionally expressed in alveolar type II epithelial cells, but the expression decreases along with transdifferentiation, and PEPT2 would be almost completely lost in type I cells.     

A fluorescent ligand rationally designed to be selective for zinc(II) over larger metal ions. The structures of the zinc(II) and cadmium(II) complexes of N,N-bis(2-methylquinoline)-2-(2-aminoethyl)pyridine

The metal ion coordinating properties of the ligands N,N-bis(2-methylquinoline)-2-(2-aminoethyl)pyridine (DQPEA) and N,N-bis(2-methylquinoline)-2-(2-aminomethyl)pyridine (DQPMA) are presented. DQPEA and DQPMA differ only in that DQPEA forms six-membered chelate rings that involve the pyridyl group, whereas DQPMA forms analogous five-membered chelate rings.These two ligands illustrate the application of a ligand design principle, which states that increase of chelate ring size in a ligand will result in increase in selectivity for smaller relative to larger metal ions. The formation constants (log K₁) of DQPEA and DQPMA with Ni(II), Cu(II), Zn(II), Cd(II) and Pb(II) are reported. As expected from the applied ligand design principle, small metal ions such as Ni(II) and Zn(II) show increases in log K₁ with DQPEA (six-membered chelate ring) relative to DQPMA (five-membered chelate ring), while large metal ions such as Cd(II) and Pb(II) show decreases in log K₁ when the chelate ring increases in size. In order to further understand the steric origin of the destabilization of complexes of metal ions of differing sizes by the six-membered chelate ring of DQPEA, the structures of [Zn(DQPEA)H₂O](ClO₄)₂ (1) [triclinic, , a = 9.2906(10), b = 10.3943(10), c = 17.3880(18) Å, α = 82.748(7)°, β = 88.519(7)°, γ = 66.957(6)°, Z = 4, R = 0.073] and [Cd(DQPEA)(NO₃)₂] (2) [monoclinic, C2/c, a = 22.160(3), b = 15.9444(18), c = 16.6962(18) Å, β = 119.780(3)°, Z = 8, R = 0.0425] are reported. The Zn in (1) is five-coordinate, with a water molecule completing the coordination sphere. The Cd(II) in (2) is six-coordinate, with two unidentate nitrates coordinated to the Cd. It is found that the bonds to the quinaldine nitrogens in the DQPEA complexes are considerably stretched as compared to those of analogous TPyA (tri(pyridylmethyl)amine) complexes, which effect is attributed to the greater steric crowding in the DQPEA complexes. The structures are analyzed for indications of the origins of the destabilization of the complex of the large Cd(II) ion relative to the smaller Zn(II) ion. A possible cause is the greater distortion of the six-membered chelate ring in (2) than in (1), as evidenced by torsion angles that are further away from the ideal values in (2) than in (1). Fluorescence properties of the DQPMA and DQPEA complexes of Zn(II) and Cd(II) are reported. It is found that the DQPEA complex of Zn(II) has increased fluorescence intensity compared to the DQPMA complex, while for the Cd(II) complex the opposite is found. This is related to the greater strain in the six-membered chelate ring of the Cd(II) DQPEA complex as compared to the Zn(II) complex, with resulting poorer overlap in the Cd-N bond, and hence greater ability to quench the fluorescence in the Cd(II) complex.     

Interaction of Cd and Zn during uptake and loss in the polychaete Capitella capitata: Whole body and subcellular perspectives

The interaction between Cd and Zn in aquatic organisms is known to be highly variable. The purpose of this study was to use a subcellular compartmentalization approach to examine Cd and Zn interactions in the deposit-feeding polychaete Capitella capitata (sp. I). Laboratory-reared C. capitata were co-exposed to Cd (background or 50 μg Cd l^− 1) and Zn (background or 86 μg Zn l^− 1) with ¹⁰⁹Cd and ⁶⁵Zn as radiotracers for 1 week. After the 1-week uptake period, subsets of worms were allowed to depurate accumulated metals for an additional 1 week. Worms from both phases (uptake and loss) were then subjected to subcellular fractionation to determine the compartmentalization of metals as metal-sensitive fractions [MSF — organelles and heat-denaturable proteins (HDP)] and biologically detoxified metals [BDM — heat-stable proteins (HSP) and metal-rich granules (MRG)]. Uptake and loss of Cd and Zn in C. capitata at the whole body level were similar at bkgd-Cd/bkgd-Zn, with worms depurating the majority of accumulated metal (∼ 75% Cd and ∼ 64% Zn). When exposure of Zn or Cd was increased (bkgd-Cd/86-Zn; bkgd-Zn/50-Cd), uptake of background levels of Cd or Zn, respectively, was suppressed by ∼ 50%. These accumulated metals, however, were retained during the loss phase resulting in ∼ 40-50% greater Cd and Zn whole body tissue burdens than those of bkgd-Cd/bkgd-Zn worms. Beyond exhibiting similar patterns of uptake and loss at the whole body level, Cd and Zn behaved similarly at the subcellular level. Under background levels (bkgd-Cd/bkgd-Zn), after uptake, worms partitioned a majority of Cd (∼ 65%) and Zn (∼ 55%) to the HSP and organelles fractions. The HDP and MRG fractions contained less than ∼ 6% of both metals. Following depuration, at bkgd-Cd/bkgd-Zn, Cd and Zn were lost from all subcellular fractions; loss from HSP was the greatest contributor to whole body loss. When exposed to elevated concentrations of Zn or Cd, the suppression in uptake of bkgd-Cd or bkgd-Zn observed in whole body uptake was largely due to suppressions in the storage of Cd and Zn to HSP. These results suggest that Cd-Zn interactions reduce partitioning of both Cd and Zn to HSP, indicating that metal-binding proteins such as metallothioneins play a key role in these interactions.     

Does adding fibre to a low energy,high carbohydrate,low fat diet confer any benefit to the management of newly diagnosed overweight type II diabetics?

The effect of supplementing a low energy (roughly 5·0 MJ), high carbohydrate (180 g), low fat (roughly 25 g) diet with 10-15 g of either cereal fibre or guar gum was investigated in 24 newly diagnosed overweight non-insulin-dependent (type II) diabetics. The patients were divided into three treatment groups: one received a low fibre control diet throughout the study period of 20 weeks and the other received two supplements of cereal fibre and guar gum in a crossover manner. The nutrient content of the diets was kept constant throughout. Though patients taking the low fibre diet showed a smaller reduction in fasting plasma glucose concentrations over the first eight weeks than patients taking a high fibre diet, this difference was not evident at the end of 20 weeks; reductions in weight and glycated haemoglobin values were similar for each dietary regimen throughout the trial.There was little evidence that supplementing a low energy, high carbohydrate diet with fibre confers any therapeutic benefit to type II diabetics and no evidence that taking fibre as viscous polysaccharides is any more beneficial to overweight diabetics than taking a similar fibre supplement as cereal. On the contrary, guar gum caused more abdominal discomfort and flatulence than the other diets.