Engineering and cell attachment properties of human fibronectin–fibrinogen scaffolds for use in tissue engineered blood vessels

Tissue engineered constructs reported to date have been prepared primarily from poly(glycolic) acid or collagen scaffolds onto which cells are grown and matured. In this paper we report experimental data to demonstrate the use of a natural, human protein, as a tubular scaffold for vascular grafting. Using a manual and a scalable dip-coating technique we prepared fibronectin-based tubes up to 12 cm in length and up to 3 mm in diameter. The tubes were flexible and their mechanical properties, measured in terms of tensile strength and burst pressure as a function of humidity, demonstrated their suitability as scaffolds for use in vascular grafting, e.g. coronary artery by pass grafting. In vitro tests involved the attachment of endothelial cells pumped under laminar flow conditions through the tube lumen and the adherence of smooth muscle cells on the outer surface of the tubes. These tests, carried out in multiwells, showed that the scaffolds had excellent cell attachment and guidance characteristics.     

Permeability evaluation of 45S5 Bioglass®-based scaffolds for bone tissue engineering

Permeability is a key parameter for microstructural design of scaffolds, since it is related to their capability for waste removal and nutrients/oxygen supply. In this framework, Darcy's experiments were carried out in order to determine the relationship between the pressure drop gradient and the fluid flow velocity in Bioglass^®-based scaffolds to obtain the scaffold's permeability. Using deionised water as working fluid, the measured average permeability value on scaffolds of 90–95% porosity was 1.96×10^?9 m². This value lies in the published range of permeability values for trabecular bone.     

Electrospun PLGA�Csilk fibroin�Ccollagen nanofibrous scaffolds for nerve tissue engineering

Electrospun nanofibrous scaffolds varying different materials are fabricated for tissue engineering. PLGA, silk fibroin, and collagen-derived scaffolds have been proved on good biocompatibility with neurons. However, no systematic studies have been performed to examine the PLGA-silk fibroin-collagen (PLGA-SF-COL) biocomposite fiber matrices for nerve tissue engineering. In this study, different weight ratio PLGA-SF-COL (50:25:25, 30:35:35) scaffolds were produced via electrospinning. The physical and mechanical properties were tested. The average fiber diameter ranged from 280 + 26 to 168 + 21 nm with high porosity and hydrophilicity; the tensile strength was 1.76 ± 0.32 and 1.25 ± 0.20 Mpa, respectively. The results demonstrated that electrospinning polymer blending is a simple and effective approach for fabricating novel biocomposite nanofibrous scaffolds. The properties of the scaffolds can be strongly influenced by the concentration of collagen and silk fibroin in the biocomposite. To assay the cytocompatibility, Schwann cells were seeded on the scaffolds; cell attachment, growth morphology, and proliferation were studied. SEM and MTT results confirmed that PLGA-SF-COL scaffolds particularly the one that contains 50% PLGA, 25% silk fibroin, and 25% collagen is more suitable for nerve tissue engineering compared to PLGA nanofibrous scaffolds.     

Fabrication of highly porous scaffolds for tissue engineering based on star-shaped functional poly(ε-caprolactone)

The potential of novel functional star‐shaped poly(ε‐caprolactone)s of controlled molecular weight and low molecular weight distribution bearing acrylate end groups as material for biomedical applications was demonstrated in this study. The polymers were functionalized via Michael‐type addition of amino acid esters containing amino or thiol groups showing the potential for immobilization of biomolecules. Furthermore, scaffolds of different geometries were prepared by uniaxial freezing of polymer solutions followed by freeze drying. Different solvents and polymer concentrations were investigated, resulting in scaffolds with porosities between 76 and 96%. Mechanical properties of the scaffolds were investigated and the morphology was determined via scanning electron microscopy. Scaffolds with interconnected channels were prepared using benzene, 1,2‐dichloroethane or dioxane as solvent. The tubular longitudinal pores in honeycomb arrangement extend throughout the full extent of the scaffolds (typical pore sizes: 20–100 µm). Biotechnol. Bioeng. 2011; 108:694–703. © 2010 Wiley Periodicals, Inc.     

Repetitive Arg-Gly-Asp peptide as a cell-stimulating agent on electrospun poly(ϵ-caprolactone) scaffold for tissue engineering

Electrospun scaffolds derived from poly(ϵ-caprolactone) (PCL), a well known biodegradable material, have an architecture that is suitable for hosting cells. However, their biomedical applications are restricted because these scaffolds lack the bioactivity necessary to stimulate cell responses. In this work, a repetitive Arg-Gly-Asp (rRGD) peptide was produced as a cell-stimulating agent to provide the PCL scaffold with bioactivity. DNA encoding rRGD was amplified by polymerase chain reaction using overlap primers without a DNA template, and cloned into a protein expression vector to produce a His-tag fusion peptide. In an in vitro cell adhesion assay, the purified rRGD peptide, comprising 30 RGD repeats, promoted a 1.5-fold greater cell adhesion than the commercial tripeptide RGD. The rRGD peptide was immobilized onto an electrospun PCL scaffold that had been pretreated with argon plasma and graft-polymerized with acrylic acid. Fourier transform infrared (FTIR) analysis indicated that covalently linked rRGD peptide was present on the scaffold. The PCL scaffold with immobilized rRGD showed significantly changed hydrophilic properties and an enhanced adhesion and proliferation of mouse fibroblast cells by 2.3- and 2.9-fold, respectively, compared to the PCL scaffold alone. Through its ability to promote cell adhesion and proliferation, the rRGD peptide has great potential as a stimulant for improving the suboptimal cell-matrix interaction of polymeric scaffolds for tissue engineering applications.     

Characterization of tissue scaffolds for time-dependent biotransport criteria – a novel computational procedure

This study aims to establish a new computational framework that allows modeling transient oxygen diffusion in tissue scaffolds more efficiently. It has been well known that the survival of cells strongly relies on continuous oxygen/nutrient supply and metabolite removal. With optimal design in scaffold architecture, its ability to sustain long distance oxygen supply could be improved considerably. In this study, finite element based homogenization procedure is first used to characterize the initial effective biotransport properties in silico. These initial properties are proper indicators to prediction of the on-going performance of tissue scaffolds over time. The transient model by adopting an edge-based smoothed finite element method with combination of mass-redistributed method is then established to more efficiently simulate the transient oxygen transfer process in tissue scaffolds. The proposed new method allows large time steps to model the oxygen diffusion process without losing numerical accuracy, thereby enhancing the computational efficiency significantly, in particular for the design optimization problems which typically require numerous analysis iterations. A number of different scaffold designs are examined either under net diffusion without cell seeding, or under cellular oxygen/nutrient uptake with or without considering cell viability. The association between the homogenized effective diffusivity of net scaffold microstructures and corresponding transient diffusion and time-dependent cellular activities is divulged. This study provides some insights into scaffold design.     

Optimization of phage λ promoter strength for synthetic small regulatory RNA-based metabolic engineering

Synthetic small regulatory RNAs (sRNAs) are gene-silencing tools that can be used to tune gene expression in prokaryotes. A recent study by our group proposed rational design principles, introduced a regulatory system that may be used to implement synthetic sRNAs, and showed their utility in metabolic engineering. The regulatory system employed the strong phage λ P_R promoter to tightly control synthetic sRNA production. Here, we fine-tuned the strength of the P_R promoter via mutagenesis in order to optimize the level of synthetic sRNAs while maintaining the ability of the promoter to be regulated by CI proteins. Five mutant promoters of different strengths, ranging from 24 to 87% of that of the wild-type P_R promoter, were identified and confirmed to be repressed by CI proteins. A mutated promoter with only 40% of the original strength still produced enough synthetic sRNAs to inhibit the translation of the target mRNA to ~10% of the original level. As a practical application, we tested our promoters as drivers for a synthetic anti-murE sRNA, which was used to adjust the production of cadaverine. As the promoter strength decreased, the cadaverine titer first increased and then dropped. A mutated promoter with 39% of the original strength achieved the improved cadaverine titer of 2.15 g/L. The mutant promoters developed in this study should prove useful for tuning the expression levels of synthetic sRNAs for metabolic engineering.     

Wet chemical synthesis of chitosan hydrogel–hydroxyapatite composite membranes for tissue engineering applications

Chitosan, a deacetylated derivative of chitin is a commonly studied biomaterial for tissue-engineering applications due to its biocompatibility, biodegradability, low toxicity, antibacterial activity, wound healing ability and haemostatic properties. However, chitosan has poor mechanical strength due to which its applications in orthopedics are limited. Hydroxyapatite (HAp) is a natural inorganic component of bone and teeth and has mechanical strength and osteoconductive property. In this work, HAp was deposited on the surface of chitosan hydrogel membranes by a wet chemical synthesis method by alternatively soaking the membranes in CaCl₂ (pH 7.4) and Na₂HPO₄ solutions for different time intervals. These chitosan hydrogel–HAp membranes were characterized using SEM, AFM, EDS, FT-IR and XRD analyses. MTT assay was done to evaluate the biocompatibility of these membranes using MG-63 osteosarcoma cells. The biocompatibility studies suggest that chitosan hydrogel–HAp composite membranes can be useful for tissue-engineering applications.     

Electrospun chitosan-graft-poly (ε -caprolactone)/poly (ε-caprolactone) cationic nanofibrous mats as potential scaffolds for skin tissue engineering

This research is aimed to develop cationic nanofibrous mats with improved cellular adhesion profiles and stability of three-dimensional fibrous structure as potential scaffolds for skin tissue engineering. Firstly, amino-remained chitosan-graft-poly (?-caprolactone) (CS-g-PCL) was synthesized with a facile one-step manner by grafting ?-caprolactone oligomers onto the hydroxyl groups of CS via ring-opening polymerization by using methanesulfonic acid as solvent and catalyst. And then, CS-g-PCL/PCL nanofibrous mats were obtained by electrospinning of CS-g-PCL/PCL mixed solution. Scanning electron microscopy (SEM) images showed that the morphologies and diameters of the nanofibers were mainly affected by the weight ratio of CS-g-PCL to PCL. The enrichment of amino groups on the nanofiber surface was confirmed by X-ray photoelectron spectroscopy (XPS). With the increase of CS-g-PCL in CS-g-PCL/PCL nanofiber, the content of amino groups on the nanofiber surface increased, which resulted in the increase of zeta-potential of nanofibers. Studies on cell-scaffold interaction were carried out by culturing mouse fibroblast cells (L929) on CS-g-PCL/PCL nanofibrous mats with various contents of CS-g-PCL by assessing the growth, proliferation and morphologies of cells. The results of MTS assay and SEM observation showed that CS-g-PCL/PCL (2/8) mats with a moderate surface zeta-potential (ζ=3mV) were the best in promoting the cell attachment and proliferation. Toluidine blue staining further confirmed that L929 cells grew well and exhibited a normal morphology on the CS-g-PCL/PCL (2/8) mats. These results suggested the potential utilization of CS-g-PCL/PCL (2/8) nanofibrous mats for skin tissue engineering.     

The in vivo assessment of a novel scaffold containing heparan sulfate for tissue engineering with human mesenchymal stem cells

Human mesenchymal stem cells (hMSCs) are an attractive tissue engineering avenue for the repair and regeneration of bone. In this study we detail the in vivo performance of a novel electrospun polycaprolactone scaffold incorporating the glycosaminoglycan heparan sulfate (HS) as a carrier for hMSC. HS is a multifunctional regulator of many key growth factors expressed endogenously during bone wound repair, and we have found it to be a potent stimulator of proliferation in hMSCs. To assess the potential of the scaffolds to support hMSC function in vivo, hMSCs pre-committed to the osteogenic lineage (human osteoprogenitor cells) were seeded onto the scaffolds and implanted subcutaneously into the dorsum of nude rats. After 6 weeks the scaffolds were retrieved and examined by histological methods. Implanted human cells were identified using a human nuclei-specific antibody. The host response to the implants was characterized by ED1 and ED2 antibody staining for monocytes/macrophages and mature tissue macrophages, respectively. It was found that the survival of the implanted human cells was affected by the host response to the implant regardless of the presence of HS, highlighting the importance of controlling the host response to tissue engineering devices.     

The application of decellularized nucleus pulposus matrix/chitosan with transforming growth factor β3 for nucleus pulposus tissue engineering

Cytotechnology - Low back pain caused by intervertebral disc degeneration has become a global problem that seriously affects public health. The application of nucleus pulposus tissue engineering to...     

Should human chondrocytes fly? The impact of electromagnetic irradiation on chondrocyte viability and implications for their use in tissue engineering

A significant logistic factor as to the successful clinical application of the autologous tissue engineering concept is efficient transportation: the donor cells need to be delivered to tissue processing facilities which in most cases requires air transportation. This study was designed to evaluate how human chondrocytes react to X-ray exposure. Primary cell cultures were established, cultured, incubated and exposed to different doses and time periods of radiation. Subsequently, quantitative cell proliferation assays were done and qualitative evaluation of cellular protein production were performed. Our results show that after irradiation of chondrocytes with different doses, no significant differences in terms of cellular viability occurred compared with the control group. These results were obtained when chondrocytes were exposed to luggage transillumination doses as well as exposure to clinically used radiation doses. Any damage affecting cell growth or quality was not observed in our study. However, information about damage of cellular DNA remains incomplete.     

Magnetic beads (Dynabead™) toxicity to endothelial cells at high bead concentration: Implication for tissue engineering of vascular prosthesis

Magnetic beads (Dynabeads) have been used for the purification of endothelial cells. One application for this procedure may be for single-stage seeding of bypass grafts. The number of endothelial cells (EC) isolated is crucial and therefore to increase the number of cells extracted, a higher number of Dynabeads per cell may need to be used. The effect of large numbers of CD31 Dynabeads on cell proliferation/metabolism is unknown. We undertook this study using CD31-coated Dynabeads and EC from human umbilical vein. EC were coated at concentrations of 4, 10, or 50 beads per cell. The cells were cultured for 6 days with control being normal EC. Cellular proliferation was assessed by trypsinization of cells and metabolism assessed with an Alamar blue viability assay. In a further experiment a compliant polyurethane graft was single-stage seeded with both coated Dynabeads and normal EC. The results showed that using a higher number of beads per cell resulted in a reduction in cell proliferation and a reduction in cell metabolism. The total number of Dynabeads-coated cells in culture compared to controls (%) by day 6 were 30.7 +/- 2.56, 41.3 +/- 9.8 and 59.2 +/- 7.3 for 50, 10, and 4 beads per cell, respectively. The corresponding results for Alamar blue were 43.7 +/- 1.2, 61.8 +/- 1.4, and 72.1 +/- 4.3. The seeded grafts showed reduced metabolism with the Dynabeads-coated EC. In conclusion, high numbers of beads per cell have a late detrimental effect on cell proliferation and metabolism. Therefore for single-stage seeding lower numbers of Dynabeads will need to be used with resultant reduction in the number of available EC.     

A novel vascular-targeting peptide for gastric cancer delivers low-dose TNFα to normalize the blood vessels and improve the anti-cancer efficiency of 5-fluorouracil

Various vascular-targeted agents fused with tumor necrosis factor α (TNFα) have been shown to improve drug absorption into tumor tissues and enhance tumor vascular function. TCP-1 is a peptide selected through in vivo phage library biopanning against a mouse orthotopic colorectal cancer model and is a promising agent for drug delivery. This study further investigated the targeting ability of TCP-1 phage and peptide to blood vessels in an orthotopic gastric cancer model in mice and assessed the synergistic anti-cancer effect of 5-fluorouracil (5-FU) with subnanogram TNFα targeted delivered by TCP-1 peptide. In vivo phage targeting assay and in vivo colocalization analysis were carried out to test the targeting ability of TCP-1 phage/peptide. A targeted therapy for improvement of the therapeutic efficacy of 5-FU and vascular function was performed through administration of TCP-1/TNFα fusion protein in this model. TCP-1 phage exhibited strong homing ability to the orthotopic gastric cancer after phage injection. Immunohistochemical staining suggested that and TCP-1 phage/TCP-1 peptide could colocalize with tumor vascular endothelial cells. TCP-1/TNFα combined with 5-FU was found to synergistically inhibit tumor growth, induce apoptosis and reduce cell proliferation without evident toxicity. Simultaneously, subnanogram TCP-1/TNFα treatment normalized tumor blood vessels. Targeted delivery of low-dose TNFα by TCP-1 peptide can potentially modulate the vascular function of gastric cancer and increase the drug delivery of chemotherapeutic drugs.     

Comparative analysis of the chemical treatments used in keratin extraction from red sheep’s hair and the cell viability evaluations of this keratin for tissue engineering applications

Hair waste is one of the solid substances rejected by the leather industry. This waste finds its way into the surroundings causing serious environmental pollution. This hair waste may be utilized for effective extraction of keratin, thereby generating value-added products with numerous applications. Thus we focusing on utilizing red sheep’s hair waste for extracting keratin by the application of different chemical treatments such as sodium hydroxide, sodium sulfide, mercaptoethanol, cysteine, sodium metabisulfite with urea (SMB), and SMB with SDS (SMBS). CD spectrum and FTIR results of the keratin samples indicated a predominance of the helical conformation along with β sheets. SDS-PAGE confirmed the molecular weight of the keratin samples to be in the range of 40–60 kDa. DSC and TGA analysis exhibited the extracted keratin to have a higher denaturation temperature (>200 °C) and thermal stability. The keratin samples obtained using varied chemical treatments were compared in terms of yield, protein content, and cost-effectiveness, and the sample obtained using SMBS was preferred for in vitro studies. It is indicated that keratin extracted using SMBS effectively involved for fibroblast cell growth. Thus, we suggest that these keratin could produce biomaterials that can serve as a valuable material for biomedical applications.     

Three-dimensional hierarchical composite scaffolds consisting of polycaprolactone, β-tricalcium phosphate, and collagen nanofibers: fabrication, physical properties, and in vitro cell activity for bone tissue regeneration

β-Tricalcium phosphate (β-TCP) and collagen have been widely used to regenerate various hard tissues, but although Bioceramics and collagen have various biological advantages with respect to cellular activity, their usage has been limited due to β-TCP's inherent brittleness and low mechanical properties, along with the low shape-ability of the three-dimensional collagen. To overcome these material deficiencies, we fabricated a new hierarchical scaffold that consisted of a melt-plotted polycaprolactone (PCL)/β-TCP composite and embedded collagen nanofibers. The fabrication process was combined with general melt-plotting methods and electrospinning. To evaluate the capability of this hierarchical scaffold to act as a biomaterial for bone tissue regeneration, physical and biological assessments were performed. Scanning electron microscope (SEM) micrographs of the fabricated scaffolds indicated that the β-TCP particles were uniformly embedded in PCL struts and that electrospun collagen nanofibers (diameter = 160 nm) were well layered between the composite struts. By accommodating the β-TCP and collagen nanofibers, the hierarchical composite scaffolds showed dramatic water-absorption ability (100% increase), increased hydrophilic properties (20%), and good mechanical properties similar to PCL/β-TCP composite. MTT assay and SEM images of cell-seeded scaffolds showed that the initial attachment of osteoblast-like cells (MG63) in the hierarchical scaffold was 2.2 times higher than that on the PCL/β-TCP composite scaffold. Additionally, the proliferation rate of the cells was about two times higher than that of the composite scaffold after 7 days of cell culture. Based on these results, we conclude that the collagen nanofibers and β-TCP particles in the scaffold provide good synergistic effects for cell activity.