Synthesis and characterization of Guar gum based biopolymeric hydrogels as carrier materials for controlled delivery of methotrexate to treat colon cancer

Guar Gum has been evaluated for its importance in food and pharmaceutical industry. A blended biopolymeric hydrogel was prepared by solution casting technique using guar gum (GG), chitosan (CS), polyvinyl alcohol (PVA), chemically crosslinked with tetra orthosilicate (TEOS) and impregnated with methotrexate (MTX) to assess its drug carrying capacity against colon cancer (HCT-116). The surface morphology, chemical bonding, hydrophilicity and water absorbing capacity were analyzed by atomic force microscopy (AFM), Fourier transform infrared spectroscopy (FTIR), contact angle measurements and swelling properties in variable conditions. Furthermore, degradation, drug release kinetics, hemocompatibility, and cytotoxicity of MTX-loaded hydrogel was tested. The release of MTX from GG/CS/PVA biopolymeric blend occurred in sustained manner. Results displayed that in 7 h 25 min duration 96% of the drug was released in phosphate buffer saline (PBS) at pH 7.4. These blends were non-hemolytic, and antiproliferative against HCT-116. Furthermore, the MTT assay has revealed that MTX-loaded hydrogel had prominently decreased the cell viability (with IC50 11.7 µg/ml) as compared to free MTX (with IC50 21.57 µg/ml). Hence, these results suggest that guar gum based hydrogels are potential biomaterials for colon cancer treatment.     

Potential of 2D crosslinked sericin membranes with improved biostability for skin tissue engineering

Silk sericin protein is a natural, hydrophilic, macromolecular glycoprotein mainly synthesized in the middle silk gland of the silkworm. It constitutes 25–30% of the silk cocoon. Sericin proteins have antioxidant, antimicrobial, UV-resistant properties, promote wound healing and support cell proliferation even in serum-free media. Most of the sericin is discarded as waste in silk processing industries. This study aims at improving the mechanical strength and stability of sericin extracted from the silk cocoons during processing and utilize it as a biocompatible natural biopolymer in biomedical applications. Crosslinked sericin membranes, from the cocoon of non-mulberry tropical silkworm, Antheraea mylitta, were prepared using gluteraldehyde as the crosslinking agent. Physical and structural characteristics of the membranes were analyzed using scanning electron microscopy, atomic force microscopy, Fourier transform infrared spectroscopy and X-ray diffraction along with swelling and degradation studies. The secondary structure of the membrane indicates that crosslinking provides a more integrated structure that significantly improves the stability and mechanical strength of the membranes. In vitro cytocompatibility of the membranes was evaluated by MTT assay and cell cycle analysis of feline fibroblast cells. The adherence, growth and proliferation patterns of cells on membranes were assessed by confocal microscopy, which demonstrated that the latter is non-toxic and supports cell growth. Cell cycle analyses indicate cytocompatibility with normal cell cycle pattern. This study reveals that silk sericin protein can be used as a biocompatible natural biopolymer for various applications in the biomedical field.     

Nanofibrous nonmulberry silk/PVA scaffold for osteoinduction and osseointegration

Poly‐vinyl alcohol and nonmulberry tasar silk fibroin of Antheraea mylitta are blended to fabricate nanofibrous scaffolds for bone regeneration. Nanofibrous matrices are prepared by electrospinning the equal volume ratio blends of silk fibroin (2 and 4 wt%) with poly‐vinyl alcohol solution (10 wt%) and designated as 2SF/PVA and 4SF/PVA, respectively with average nanofiber diameters of 177 ± 13 nm (2SF/PVA) and 193 ± 17 nm (4SF/PVA). Fourier transform infrared spectroscopy confirms retention of the secondary structure of fibroin in blends indicating the structural stability of neo‐matrix. Both thermal stability and contact angle of the blends decrease with increasing fibroin percentage. Conversely, fibroin imparts mechanical stability to the blends; greater tensile strength is observed with increasing fibroin concentration. Blended scaffolds are biodegradable and support well the neo‐bone matrix synthesis by human osteoblast like cells. The findings indicate the potentiality of nanofibrous scaffolds of nonmulberry fibroin as bone scaffolding material. © 2014 Wiley Periodicals, Inc. Biopolymers 103: 271–284, 2015.     

Preparation, characterization, and properties of chitosan-g-poly(vinyl alcohol) copolymer

The graft copolymer chitosan-g-poly(vinyl alcohol), with nontoxicity, biodegradability, and biocompatibility, was prepared by a novel method. The copolymer with porous net structure was observed by scanning electron microscopy (SEM). It is a potential method to combine chitosan with the synthetic polymers. The grafting reactions were conducted with various poly(vinyl alcohol) (PVA)/6-O-succinate-N-phthaloyl-chitosan (PHCSSA) feed ratios to obtain chitosan-g-poly(vinyl alcohol) copolymers with various PVA contents. The chemical structure of the chitosan-g-poly(vinyl alcohol) was characterized by Fourier transform infrared and nuclear magnetic resonance (NMR) spectroscopy. Differential scanning calorimetry (DSC), X-ray diffraction (XRD), and SEM were also detected to characterize the copolymer.     

Carboxymethyl chitin/organic rectorite composites based nanofibrous mats and their cell compatibility

In this study, carboxymethyl chitin (CMC) - organic rectorite (OREC)/poly (vinyl alcohol) (PVA) composite nanofibrous mats were successfully prepared via electrospinning. SAXRD pattern showed that the interlayer distance of OREC was increased from 3.68 to 4.08nm, which verified that polymer chains were intercalated into the interlayer of OREC. Field emission scanning electron microscopy, Fourier transform infrared spectra and energy-dispersive X-ray spectroscopy were used to characterize the morphology and microcosmic structure of nanofibrous mats. Thermal properties of mats were determined by differential scanning calorimetry. To evaluate the cell compatibility of mats, mouse lung fibroblast (L929) was chosen for cell attachment and spreading assay. The results shows that nanofibrous mats contained OREC have better thermal properties. Besides, the addition of OREC has little effect on the cell compatibility of nanofibrous mats.     

Fabrication of silk sericin nanofibers from a silk sericin-hope cocoon with electrospinning method

In this study, silk sericin nanofibers from sericin hope-silkworm, whose cocoons consist almost exclusively of sericin were successfully prepared by electrospinning method. Scanning electron microscopy (SEM) was used to observe the morphology of the fibers. The effect of spinning conditions, including the concentration of sericin cocoon solution, acceleration voltage, spinning distance and flow rate on the fiber morphologies and the size distribution of sericin nanofibers were examined. The structure and physical properties were also observed by Fourier transform infrared (FT-IR), differential scanning calorimetry (DSC) and thermogravimetric analysis (TG). The optimum conditions for producing finely thinner fibrous sericin nanofibers without beads were the concentration of sericin solution above 6-8 wt%, acceleration voltage ranging from 25 to 32 kV, spinning distance above 9 cm, and flow rate above 0.06 cm min(-1). The mean diameter of as spun sericin fibers varied from 114 to 430 nm at the different spinning conditions. In the as-spun fibers, silk sericin was present in a random coil conformation, while after methanol treatment, the molecular structure of silk sericin was transformed into a β-sheet containing structure. Sericin hope nanofiber demonstrated thermal degradation at lower temperature than the sericin hope cocoon, which probably due to the randomly coiled rich structure of the sericin hope nanofiber.     

Compatible ternary blends of chitosan/poly(vinyl alcohol)/poly(lactic acid) produced by oil-in-water emulsion processing

Ternary compatible blends of chitosan, poly(vinyl alcohol), and poly(lactic acid) were prepared by an oil-in-water (O/W) emulsion process. Solutions of chitosan in aqueous acetic acid, poly(vinyl alcohol) (PVA) in water, and poly(lactic acid) (PLA) in chloroform were blended with a high-shear mixer. PVA was used as an emulsifier to stabilize the emulsion and to reduce the interfacial tension between the solid polymers in the blends produced. It proved to work very well because the emulsions were stable for periods of days or weeks and compatible blends were obtained when PVA was added. This effect was attributed to a synergistic effect of PVA and chitosan because the binary blends PVA/PLA and chitosan/PLA were completely incompatible. The blends were characterized by scanning electron microscopy (SEM), differential scanning calorimetry (DSC), thermal mechanical analysis (TMA), stress-strain tests, and Fourier transform infrared spectroscopy (FTIR). The results indicated that despite the fact that the system contained distinct phases some degree of molecular miscibility occurred when the three components were present in the blend.     

Synthesis and magnetic properties of biocompatible hybrid hollow spheres

Magnetic hybrid hollow spheres of about 200 nm were prepared by a core-template-free route, that is, adding Fe3O4 nanoparticles stabilized by poly(vinyl alcohol) (PVA) to an aqueous solution of polymer-monomer pairs composed of a cationic polymer, chitosan (CS), and an anionic monomer, acrylic acid (AA), followed by polymerization of acrylic acid and selective cross-linking of chitosan at the end of polymerization. The obtained hybrid spheres were characterized by dynamic light scattering (DLS) in aqueous solution and observed by transmission electron microscopy (TEM), scanning electron microscopy (SEM), and atomic force microscopy (AFM) in the solid state. Fourier transform infrared spectroscopy (FTIR) and X-ray and electron diffractions revealed that the Fe3O4 nanoparticles were incorporated into the shells of chitosan-poly(acrylic acid) (CS-AA) hollow spheres. Magnetization studies and M?ssbauer spectroscopy suggested that the chains (or islands) of iron oxide nanoparticles were most likely formed in the walls of the hollow spheres. The phantom test of magnetic resonance imaging showed that the synthesized hybrid hollow spheres had a significant magnetic resonance signal enhancement in T2-weighted image.     

Synthesis, material properties, and biocompatibility of a novel self-cross-linkable poly(caprolactone fumarate) as an injectable tissue engineering scaffold

A novel self-cross-linkable and biodegradable macromer, poly(caprolactone fumarate) (PCLF), has been developed for guided bone regeneration. This macromer is a copolymer of fumaryl chloride, which contains double bonds for in-situ cross-linking, and poly(epsilon-caprolactone), which has a flexible chain to facilitate self-cross-linkability. PCLF was characterized with Fourier transform infrared spectroscopy, 1H and 13C nuclear magnetic resonance spectroscopy, and gel permeation chromatography. Porous scaffolds were fabricated with sodium chloride particles as the porogen and a chemical initiation system. The PCLF scaffolds were characterized with scanning electron microscopy and micro-computed-tomography. The cytotoxicity and in vivo biocompatibility of PCLF were also assessed. Our results suggest that this novel copolymer, PCLF, is an injectable, self-cross-linkable, and biocompatible macromer that may be potentially used as a scaffold for tissue engineering applications.     

Non-bioengineered silk gland fibroin protein: characterization and evaluation of matrices for potential tissue engineering applications

The possibility of using wild non-mulberry silk protein as a biopolymer remains unexplored compared to domesticated mulberry silk protein. One of the main reasons for this was for not having any suitable method of extraction of silk protein fibroin from cocoons and silk glands. In this study non-bioengineered non-mulberry silk gland fibroin protein from tropical tasar silkworm Antheraea mylitta, is regenerated and characterized using 1% (w/v) sodium dodecyl sulfate (SDS). The new technique is important and unique because it uses a mild surfactant for fibroin dissolution and is advantageous over other previous reported techniques using chaotropic salts. Fabricated fibroin films are smooth as confirmed by atomic force microscopy. Circular dichroism spectrometry along with Fourier transformed infrared spectroscopy and X-ray diffraction reveal random coil/alpha-helix conformations in regenerated fibroin which transform to beta-sheets, resulting in crystalline structure and protein insolubility through ethanol treatment. Differential scanning calorimetry shows an increase in glass transition (Tg) temperature and enhanced degradation temperature on alcohol treatment. Enhanced cell attachment and viability of AH927 feline fibroblasts were observed on fibroin matrices. Higher mechanical strength along with controllable water stability of regenerated gland fibroin films make non-mulberry Indian tropical tasar silk gland fibroin protein a promising biomaterial for tissue engineering applications.     

Structural and luminescent studies of erbium‐doped CaZrO3 green‐emitting nanophosphors

Erbium (Er) (0.5, 1.0 and 1.5 wt%)‐doped CaZrO₃ nanophosphors were synthesized by the sol–gel method using poly(vinyl alcohol) as the chelating agent. Their structural and photoluminescence properties were studied using X‐ray diffraction (XRD), field emission scanning electron microscopy–energy dispersive spectroscopy (FESEM‐EDS), transmission electron microscopy (TEM), photoluminescence and Fourier transform infrared spectroscopy (FTIR). The XRD patterns of the samples confirm that nanoscale crystallite sizes. Agglomeration of the samples was observed using field emission scanning electron microscopy images. Energy dispersive spectroscopy measurements confirmed the existence of Ca, Zr, O and Er in the samples. Average particle sizes for the samples were calculated from transmission electron microscopy images. FTIR spectra clearly show characteristic absorption bands related to the metal oxides, as well as some other organic molecules. The photoluminescence spectra show bands in the green region. The Commission International de l'Eclairage coordinates were calculated and found to be in green region.     

Electrospun core-shell nanofibers from homogeneous solution of poly(vinyl alcohol)/bovine serum albumin

We report on the preparation and characterization of core-shell structure of bovine serum albumin (BSA) blended poly(vinyl alcohol) (PVA) composite nanofibers by using electrospinning process. The core-shell structure nanofibers have been electrospun from the homogeneous solution of BSA (as shell) and PVA (as core). The morphology, chemical compositions, structure and thermal properties of the resultant products were characterized by scanning electron microscopy (SEM), energy dispersive X-ray spectrometer (EDX), high-resolution transmission electron microscopy (HR-TEM), Fourier transform infrared (FT-IR) spectroscopy, differential scanning calorimetry, thermogravimetric analysis (TGA) and X-ray photoelectron spectroscopy (XPS) techniques. The blending ratio of PVA and BSA, molecular weight of BSA and the applied voltage of electrospinning process were observed to be the key influence factors on the formation of core-shell nanofibers structure. Based on the experimental findings, we proposed a possible physical mechanism for the formation of core-shell nanofibers structure of PVA blended BSA composite.     

Preparation and in vitro evaluation of xanthan gum facilitated superabsorbent polymeric microspheres

Interpenetrating polymer network (IPN) hydrogel microspheres of xanthan gum (XG) based superabsorbent polymer (SAP) and poly(vinyl alcohol) (PVA) were prepared by water-in-oil (w/o) emulsion crosslinking method for sustained release of ciprofloxacin hydrochloride (CIPRO). The microspheres were prepared with various ratios of hydrolyzed SAP to PVA and extent of crosslinking density. The prepared microspheres with loose and rigid surfaces were evidenced by scanning electron microscope (SEM). Fourier transform infrared spectroscopy (FTIR) and X-ray diffraction (XRD) analysis confirmed the IPN formation. Differential scanning calorimetry (DSC) study was performed to understand the dispersion nature of drug after encapsulation. The in vitro drug release study was extensively evaluated depending on the process variables in both acidic and alkaline media. All the formulations exhibited satisfactory physicochemical and in vitro release characteristics. Release data indicated a non-Fickian trend of drug release from the formulations. Based on the results, this study suggest that CIPRO loaded IPN microspheres were suitable for sustained release application.     

Chemical modification of silk sericin in lithium chloride/dimethyl sulfoxide solvent with 4-cyanophenyl isocyanate

This paper reports chemical modification of silk sericin in LiCl/dimethyl sulfoxide (DMSO) solvent with 4-cyanophenyl isocyanate. Sericin is a highly hydrophilic protein secreted by Bombyx mori, serving as a protein glue in a cocoon. LiCl/DMSO was found to be a good solvent of sericin and useful for homogeneous modification of its abundant hydroxyl groups under nonaqueous condition. Fourier transform infrared (FTIR) analysis of the modified sericins revealed that 4-cyanophenyl groups were incorporated into sericin molecules mainly through urethane linkages. Several characteristics of the modified sericins such as solubility characteristic, hygroscopic property, and thermal stability were investigated. Secondary structure analysis using FTIR spectra suggested that formation of strong intermolecular hydrogen bonds was inhibited by the modification that is probably attributable to the incorporation of bulky 4-cyanophenyl groups. These results demonstrate that chemical modification of sericin using LiCl/DMSO solvent markedly alters its characteristics.     

Effect of polyamines on mechanical and structural properties of Bombyx mori silk

Silkworm, Bombyx mori (B. mori) belongs to the Lepidoptera family. The silk produced from this insect, mulberry silk, gained lot of importance as a fabric. Silk is being exploited as a biomaterial due to its surprising strength and biocompatibility. Polyamines (PA) are important cell growth regulators. In the present work the effect of treatment of polyamines, putrescine (Put), spermidine (Spd), and spermine (Spm) on the quantity and quality of silk produced was assessed. Results showed that exogenous feeding of Spd at a concentration of 50 µM increased fiber length significantly. Analysis by Fourier transform infrared (FTIR) on the properties of silk obtained from Spd treated silkworms revealed an increase in percentage of absorption with no difference in peak positions of amide I and amide III groups. Scanning electron microscopy (SEM) revealed an increase in diameter of silk. Further, analysis at molecular level showed an increase in fibroin expression in Spd treated silk glands. However, the Spd treatment showed no significant difference with respect to fibroin to sericin ratio per unit weight of cocoon, silk tenacity, and percent elongation. Thus, the present results show that polyamine treatment would influence silk quality at structural, mechanical, and molecular level in the Bombyx mori, which can be exploited in silk biomaterial production.     

Cell culture and characterization of cross-linked poly(vinyl alcohol)-g-starch 3D scaffold for tissue engineering

The research goal of this experiment is chemically to cross-link poly(vinyl alcohol) (PVA) and starch to form a 3D scaffold that is effective water absorbent, has a stable structure, and supports cell growth. PVA and starch can be chemically cross-linked to form a PVA-g-starch 3D scaffold polymer, as observed by Fourier transform infrared spectroscopy (FTIR), with an absorbency of up to 800%. Tensile testing reveals that, as the amount of starch increases, the strength of the 3D scaffold strength reaches 4 × 10⁻² MPa. Scanning electron microscope (SEM) observations of the material reveal that the 3D scaffold is highly porous formed using a homogenizer at 500 rpm. In an enzymatic degradation, the 3D scaffold was degraded by various enzymes at a rate of up to approximately 30–60% in 28 days. In vitro tests revealed that cells proliferate and grow in the 3D scaffold material. Energy dispersive spectrometer (EDS) analysis further verified that the bio-compatibility of this scaffold.     

Modification of cellulosic fabric using polyvinyl alcohol, part-II: Colorfastness properties

A series of aqueous solutions of poly(vinyl alcohol) of various commercial products were prepared and applied onto the surfaces of cotton and blends of cotton/polyester fabrics. Fourier transform infrared spectrophotometer was used to confirm the molecular structure of the polyvinyl alcohol used. Performance tests such as colorfastness to rubbing (dry and wet) and colorfastness to washing were determined. The controlling variables affecting the performance properties of the finished substrate such as post-treatment with poly(vinyl alcohol) of various commercial trades, concentration and dilutions were studied. Crocking, washing and hue change of the treated dyed and printed fabrics is accompanied by the formation of semi-inter-penetrated network structure due to the presence of the hydroxyl (-OH) groups which make feasible to a number of grafting and physical cross linking reactions of polymer backbone.     

Interpenetrating polymer network (IPN) hydrogel microspheres for oral controlled release application

Interpenetrating polymer network (IPN) hydrogel microspheres of sodium carboxymethyl cellulose (NaCMC) and poly(vinyl alcohol) (PVA) were prepared by water-in-oil (w/o) emulsion crosslinking method for oral controlled release delivery of a non-steroidal anti-inflammatory drug, diclofenac sodium (DS). The microspheres were prepared with various ratios of NaCMC to PVA, % drug loading and extent of crosslinking density at a fixed polymer weight. The prepared microspheres with loose and rigid surfaces were evidenced by scanning electron microscope (SEM). Fourier transform infrared spectroscopy (FTIR) and X-ray diffraction (XRD) analysis confirmed the IPN formation. Differential scanning calorimetry (DSC) study was performed to understand the dispersion nature of drug after encapsulation. The in vitro drug release study was extensively evaluated depending on the process variables in both acid and alkaline media. All the formulations exhibited satisfactory physicochemical and in vitro release characteristics. Release data indicated a non-Fickian trend of drug release from the formulations. Based on the results of this study suggest that DS loaded IPN microspheres were suitable for oral controlled release application.     

Effect of methyl alcohol on the morphology and conformational characteristics of silk sericin

Effects of methyl alcohol on the morphology and conformational characteristics of silk sericin (SS) were studied. Scanning electron microscope showed that morphology of SS lyophilized was dramatically changed from sponge-like structure to spherical fine particle type. X-ray diffraction method, infrared spectroscopy, and differential scanning calorimetry showed that the conformation of SS was random coil structure regardless of the addition of methyl alcohol. On the other hand, circular dichroism showed that the molecular states of SS were more densely packed.     

Controllable degradation product migration from cross-linked biomedical polyester-ethers through predetermined alterations in copolymer composition

Uniformly degrading biomaterials with adjustable degradation product migration rates were customized by combining the advantages of cross-linked poly(epsilon-caprolactone) with the hydrophilic character of poly(1,5-dioxepan-2-one). Hydrolytic degradation of these random cross-linked networks using 2,2'-bis-(epsilon-caprolactone-4-yl) propane (BCP) as the cross-linking agent was studied for up to 546 days in phosphate buffer solution at pH 7.4 and 37 degrees C. The hydrophilicity of the materials was altered by varying the copolymer compositions. After different hydrolysis times the materials were characterized, and the degradation products were extracted from the buffer solution and analyzed. Fourier transform infrared spectroscopy, differential scanning calorimetry, atomic force microscopy, scanning electron microscopy, and gas chromatography-mass spectrometry were used to observe the changes taking place during the hydrolysis. From the results it was concluded that degradation profiles and migration of degradation products are controllable by tailoring the hydrophilicity of cross-linked polyester-ether networks.