Streptomyces lividans glycosylates an exoglucanase (Cex) from Cellulomonas fimi.

Exoglucanase Cex from Cellulomonas fimi is a glycoprotein [Langsford et al., J. Gen. Microbiol. 130 (1984) 1367-1376]. Cex produced by Streptomyces lividans from the cloned cex gene is also glycosylated. The extent and nature of glycosylation are similar for Cex from both organisms. The glycosylation affords protection against proteolysis for the enzymes from both organisms when they are bound to cellulose, but not in solution. The ability to glycosylate cloned gene products enhances the utility of Streptomyces as a host for the production of heterologous polypeptides.     

Structure of the gene encoding the exoglucanase of Cellulomonas fimi

In Cellulomonas fimi the cex gene encodes an exoglucanase (Exg) involved in the degradation of cellulose. The gene now has been sequenced as part of a 2.58-kb fragment of C. fimi DNA. The cex coding region of 1452 bp (484 codons) was identified by comparison of the DNA sequence to the N-terminal amino acid (aa) sequence of the Exg purified from C. fimi. The Exg sequence is preceded by a putative signal peptide of 41 aa, a translational initiation codon, and a sequence resembling a ribosome-binding site five nucleotides (nt) before the initiation codon. The nt sequence immediately following the translational stop codon contains four inverted repeats, two of which overlap, and which can be arranged in stable secondary structures. The codon usage in C. fimi appears to be quite different from that of Escherichia coli. A dramatic (98.5%) bias occurs for G or C in the third position for the 35 codons utilized in the cex gene.     

Sequence conservation and region shuffling in an endoglucanase and an exoglucanase from Cellulomonas fimi

Cellulomonas fimi produces an endoglucanase and an exoglucanase which bind strongly to cellulose. Each enzyme contains three distinct regions: a short sequence of about 20 amino acids containing only proline and threonine (the Pro-Thr box); an irregular region, rich in hydroxyamino acids, of low charge density, and which is predicted to have little secondary structure; and an ordered region of higher charge density which contains a potential active site, and which is predicted to have secondary structure. The Pro-Thr box is conserved almost perfectly in the two enzymes. The irregular regions are 50% conserved, and the conserved sequences include four Asn-Xaa-Ser/Thr sites. The ordered regions appear not to be conserved, but the potential active sites both have the sequence Glu-Xaa7-Asn-Xaa6-Thr; they occur at widely separated sites in the two regions. The order of the regions is reversed in the two enzymes: irregular-Pro-Thr box-ordered in the endoglucanase; ordered-Pro-Thr box-irregular in the exoglucanase. The genes for the two enzymes appear to have arisen by shuffling of two conserved sequences and either one or two other sequences.     

Active-site peptide "fingerprinting" of glycosidases in complex mixtures by mass spectrometry. Discovery of a novel retaining beta-1,4-glycanase in Cellulomonas fimi

New proteomics methods are required for targeting and identification of subsets of a proteome in an activity-based fashion. Here, we report the first gel-free, mass spectrometry-based strategy for mechanism-based profiling of retaining beta-endoglycosidases in complex proteomes. Using a biotinylated, cleavable 2-deoxy-2-fluoroxylobioside inactivator, we have isolated and identified the active-site peptides of target retaining beta-1,4-glycanases in systems of increasing complexity: pure enzymes, artificial proteomes, and the secreted proteome of the aerobic mesophilic soil bacterium Cellulomonas fimi. The active-site peptide of a new C. fimi beta-1,4-glycanase was identified in this manner, and the peptide sequence, which includes the catalytic nucleophile, is highly conserved among glycosidase family 10 members. The glycanase gene (GenBank accession number DQ146941) was cloned using inverse PCR techniques, and the protein was found to comprise a catalytic domain that shares approximately 70% sequence identity with those of xylanases from Streptomyces sp. and a family 2b carbohydrate-binding module. The new glycanase hydrolyzes natural and artificial xylo-configured substrates more efficiently than their cello-configured counterparts. It has a pH dependence very similar to that of known C. fimi retaining glycanases.     

Streptomyces lividans glycosylates the linker region of a beta-1,4-glycanase from Cellulomonas fimi.

The beta-1,4-glycanase Cex of the gram-positive bacterium Cellulomonas fimi is a glycoprotein comprising a C-terminal cellulose-binding domain connected to an N-terminal catalytic domain by a linker containing only prolyl and threonyl (PT) residues. Cex is also glycosylated by Streptomyces lividans. The glycosylation of Cex produced in both C. fimi and S. lividans protects the enzyme from proteolysis. When the gene fragments encoding the cellulose-binding domain of Cex (CBDCex), the PT linker plus CBDCex (PT-CBDCex), and the catalytic domain plus CBDCex of Cex were expressed in S. lividans, only PT-CBDCex was glycosylated. Therefore, all the glycans must be O linked because only the PT linker was glycosylated. A glycosylated form and a nonglycosylated form of PT-CBDCex were produced by S. lividans. The glycosylated form of PT-CBDCex was heterogeneous; its average carbohydrate content was approximately 10 mol of D-mannose equivalents per mol of protein, but the glycans contained from 4 to 12 alpha-D-mannosyl and alpha-D-galactosyl residues. Glycosylated Cex from S. lividans was also heterogeneous. The presence of glycans on PT-CBDCex increased its affinity for bacterial microcrystalline cellulose. The location of glycosylation only on the linker region of Cex correlates with the properties conferred on the enzyme by the glycans.     

Characterization of a beta-N-acetylhexosaminidase and a beta-N-acetylglucosaminidase/beta-glucosidase from Cellulomonas fimi

The gram-positive soil bacterium Cellulomonas fimi is shown to produce at least two intracellular beta-N-acetylglucosaminidases, a family 20 beta-N-acetylhexosaminidase (Hex20), and a novel family 3-beta-N-acetylglucosaminidase/beta-glucosidase (Nag3), through screening of a genomic expression library, cloning of genes and analysis of their sequences. Nag3 exhibits broad substrate specificity for substituents at the C2 position of the glycone: kcat/Km values at 25 degrees C were 0.066 s(-1) x mM(-1) and 0.076 s(-1) x mM(-1) for 4'-nitrophenyl beta-N-acetyl-D-glucosaminide and 4'-nitrophenyl beta-D-glucoside, respectively. The first glycosidase with this broad specificity to be described, Nag3, suggests an interesting evolutionary link between beta-N-acetylglucosaminidases and beta-glucosidases of family 3. Reaction by a double-displacement mechanism was confirmed for Nag3 through the identification of a glycosyl-enzyme species trapped with the slow substrate 2',4'-dinitrophenyl 2-deoxy-2-fluoro-beta-D-glucopyranoside. Hex20 requires the acetamido group at C2 of the substrate, being unable to cleave beta-glucosides, since its mechanism involves an oxazolinium ion intermediate. However, it is broad in its specificity for the D-glucosyl/D-galactosyl configuration of the glycone: Km and kcat values were 53 microM and 482.3 s(-1) for 4'-nitrophenyl beta-N-acetyl-D-glucosaminide and 66 microM and 129.1 s(-1) for 4'-nitrophenyl beta-N-acetyl-D-galactosaminide.     

Unusual sequence organization in CenB, an inverting endoglucanase from Cellulomonas fimi.

The nucleotide sequence of the cenB gene was determined and used to deduce the amino acid sequence of endoglucanase B (CenB) of Cellulomonas fimi. CenB comprises 1,012 amino acids and has a molecular weight of 105,905. The polypeptide is divided by so-called linker sequences rich in proline and hydroxyamino acids into five domains: a catalytic domain of 607 amino acids at the N terminus, followed by three repeats of 98 amino acids each which are greater than 60% identical, and a C-terminal domain of 101 amino acids which is 50% identical to the cellulose-binding domains of C. fimi cellulases Cex and CenA. A deletion mutant of the cenB gene encodes a polypeptide lacking the C-terminal 333 amino acids of CenB. The truncated polypeptide is catalytically active and, like intact CenB, binds to cellulose, suggesting that CenB has a second cellulose-binding site. The sequence of amino acids 1 to 461 of CenB is 35% identical, with a further 15% similarity, to that of a cellulase from avocado, which places CenB in cellulase family E. CenB releases mostly cellobiose and cellotetraose from cellohexaose. Like CenA, CenB hydrolyzes the beta-1,4-glucosidic bond with inversion of the anomeric configuration. The pH optimum for CenB is 8.5, and that for CenA is 7.5.     

Region-directed mutagenesis of residues surrounding the active site nucleophile in beta-glucosidase from Agrobacterium faecalis.

The active site nucleophile of the beta-glucosidase of Agrobacterium faecalis has recently been identified by the use of inhibitors. A combination of site-directed and in vitro enzymatic mutagenesis was carried out on the beta-glucosidase to probe the structure of the active site region. Forty-three point mutations were generated at 22 different residues in the region surrounding the active site nucleophile, Glu358. Only five positions were identified which affected enzyme activity indicating that only a few key residues are important to enzyme activity, thus the enzyme can tolerate a number of single residue changes and still function. The importance of Glu358 to enzymatic function has been confirmed and other residues important to enzyme structure or function have been identified.     

The structure and characterization of a modular endo-beta-1,4-mannanase from Cellulomonas fimi

The endo-beta-1,4-mannanase from the soil bacterium Cellulomonas fimi is a modular plant cell wall degrading enzyme involved in the hydrolysis of the backbone of mannan, one of the most abundant polysaccharides of the hemicellulosic network in the plant cell wall. The crystal structure of a recombinant truncated endo-beta-1,4-mannanase from C. fimi (CfMan26A-50K) was determined by X-ray crystallography to 2.25 A resolution using the molecular replacement technique. The overall structure of the enzyme consists of a core (beta/alpha)8-barrel catalytic module characteristic of clan GH-A, connected via a linker to an immunoglobulin-like module of unknown function. A complex with the oligosaccharide mannotriose to 2.9 A resolution has also been obtained. Both the native structure and the complex show a cacodylate ion bound at the -1 subsite, while subsites -2, -3, and -4 are occupied by mannotriose in the complex. Enzyme kinetic analysis and the analysis of hydrolysis products from manno-oligosaccharides and mannopentitol suggest five important active-site cleft subsites. CfMan26A-50K has a high affinity -3 subsite with Phe325 as an aromatic platform, which explains the mannose releasing property of the enzyme. Structural differences with the homologous Cellvibrio japonicus beta-1,4-mannanase (CjMan26A) at the -2 and -3 subsites may explain the poor performance of CfMan26A mutants as "glycosynthases".     

Expression and Secretion of a Cellulomonas fimi Exoglucanase in Saccharomyces cerevisiae

We used the yeast MEL1 gene for secreted alpha-galactosidase to construct cartridges for the regulated expression of foreign proteins from Saccharomyces cerevisiae. The gene for a Cellulomonas fimi beta-1,4-exoglucanase was inserted into one cartridge to create a fusion of the alpha-galactosidase signal peptide to the exoglucanase. Yeast transformed with plasmids containing this construction produced active extracellular exoglucanase when grown under conditions appropriate to MEL1 promoter function. The cells also produced active intracellular enzyme. The secreted exoglucanase was N-glycosylated and was produced continuously during culture growth. It hydrolyzed xylan, carboxymethyl cellulose, 4-methylumbelliferyl-beta-d-cellobiose, and p-nitrophenyl-beta-d-cellobiose. A comparison of the recombinant S. cerevisiae enzyme with the native C. fimi enzyme showed the yeast version to have an identical K(m) and pH optimum but to be more thermostable.     

The active site of the Escherichia coli glycogen synthase is similar to the active site of retaining GT-B glycosyltransferases

Bacterial glycogen synthases transfer a glucosyl unit, retaining the anomeric configuration, from ADP-glucose to the non-reducing end of glycogen. We modeled the Escherichia coli glycogen synthase based on three glycosyltransferases with a GT-B fold. Comparison between the model and the structure of the active site of crystallized retaining GT-B glycosyltransferases identified conserved residues with the same topology. To confirm the importance of these residues predicted by the model, we studied them in E. coli glycogen synthase by site-directed mutagenesis. Mutations D137A, R300A, K305A, and H161A decreased the specific activity 8100-, 2600-, 1200-, and 710-fold, respectively. None of these mutations increased the Km for glycogen and only H161A and R300A had a higher Km for ADP-Glc of 11- and 8-fold, respectively. These residues were essential, validating the model that shows a strong similarity between the active site of E. coli glycogen synthase and the other retaining GT-B glycosyltransferases known to date.     

Enhancing the stability of xylanase from Cellulomonas fimi by cell-surface display on Escherichia coli

Aims: The cell‐surface display of Cex, which encodes xylanase and exoglucanase from Cellulomonas fimi, was constructed on Escherichia coli using PgsA as the anchor protein. Characterization of the cell‐surface display of Cex was performed. Methods and Results: PgsA was fused to the N‐terminus of Cex and six histidines were utilized as spacers between the targeting and anchor proteins. Successful cell‐surface display of Cex was demonstrated by Western blot and immunofluorescence analyses on E. coli C41 (DE3). According to the time‐course analysis, the xylanase activity of Cex was achieved at 49 U g^?1 dry cell weight after 12 h culture at 37°C. The optimal temperature and pH ranges of the cell‐surface displayed protein with whole‐cell were broader than the corresponding ranges of the purified form. Further determination of thermostability indicated that the half‐life of cell‐surface displayed Cex was 1·6 times longer than that of purified Cex at 60°C. Conclusions: We have successfully developed the cell‐surface display of xylanase on E. coli. The cell‐surface display can enhance the stability of xylanase against changes in temperature and has the potential of becoming a whole‐cell biocatalyst for industrial applications, such as biobleaching of paper and production of renewable energy. Significance and Impact of the Study: The results demonstrated that the cell‐surface display of xylanase embedded in the cell membrane is more stable than that of the purified enzyme. Thus, to improve the stability of heterologous proteins production, cell‐surface display using the PgsA anchor protein as a tool can be considered in E. coli.     

Glutamic acid residues as metal ligands in the active site of Escherichia coli alkaline phosphatase

Four independent mutations were introduced to the Escherichia coli alkaline phosphatase active site, and the resulting enzymes characterized to study the effects of Glu as a metal ligand. The mutations D51E and D153E were created to study the effects of lengthening the carboxyl group by one methylene unit at the metal interaction site. The D51E enzyme had drastically reduced activity and lost one zinc per active site, demonstrating importance of the position of Asp(51). The D153E enzyme had an increased k(cat) in the presence of high concentrations of Mg(2+), along with a decreased Mg(2+) affinity as compared to the wild-type enzyme. The H331E and H412E enzymes were created to probe the requirement for a nitrogen-containing metal ligand at the Zn(1) site. The H331E enzyme had greatly decreased activity, and lost one zinc per active site. In the absence of high concentrations of Zn(2+), dephosphorylation occurs at an extremely reduced rate for the H412E enzyme, and like the H331E enzyme, metal affinity is reduced. Except at the 153 position, Glu is not an acceptable metal chelating amino acid at these positions in the E. coli alkaline phosphatase active site.     

Binding site analysis of cellulose binding domain CBD(N1) from endoglucanse C of Cellulomonas fimi by site-directed mutagenesis

Endoglucanase C (CenC), a beta1,4 glucanase from the soil bacterium Cellulomonas fimi, binds to amorphous cellulose via two homologous cellulose binding domains, termed CBD(N1) and CBD(N2). In this work, the contributions of 10 amino acids within the binding cleft of CBD(N1) were evaluated by single site-directed mutations to alanine residues. Each isolated domain containing a single mutation was analyzed for binding to an insoluble amorphous preparation of cellulose, phosphoric acid swollen Avicel (PASA), and to a soluble glucopyranoside polymer, barley beta-glucan. The effect of any given mutation on CBD binding was similar for both substrates, suggesting that the mechanism of binding to soluble and insoluble substrates is the same. Tyrosines 19 and 85 were essential for tight binding by CBD(N1) as their replacement by alanine results in affinity decrements of approximately 100-fold on PASA, barley beta-glucan, and soluble cellooligosaccharides. The tertiary structures of unbound Y19A and Y85A were assessed by heteronuclear single quantum coherence (HSQC) spectroscopy. These studies indicated that the structures of both mutants were perturbed but that all perturbations are very near to the site of mutation.     

The tertiary structure of endo-beta-1,4-glucanase B (CenB), a multidomain cellulase from the bacterium Cellulomonas fimi.

Endo-beta-1,4-glucanase B (CenB) is a large (110 kDa) extracellular enzyme from the cellulolytic bacterium Cellulomonas fimi. CenB contains five domains, including a typical C.fimi cellulose-binding domain, separated by distinctive linker polypeptides (Meinke et al., 1991b). X-ray scattering analyses show that CenB has a highly elongated shape resembling beads on a string. The sizes of the polypeptides produced by treatment of CenB with proteases, together with their N-terminal amino acid sequences, show that at least two of the four linkers connecting the five domains of CenB are more sensitive to proteolysis than the domains themselves. It is concluded that the beads represent the domains of CenB, the string represents the linkers.     

Glu-537, not Glu-461, is the nucleophile in the active site of (lac Z) beta-galactosidase from Escherichia coli.

The covalent intermediate formed during catalysis by the lac Z beta-galactosidase from Escherichia coli can be trapped by reaction of the enzyme with 2',4'-dinitrophenyl 2-deoxy-2-fluoro-beta-D-galactopyranoside, thereby inactivating the enzyme. Kinetic parameters for this inactivation process with the holo- and apo-enzymes have been determined. The intermediate so formed turns over only very slowly (t1/2 = 11.5 h) resulting in reactivation of the enzyme. The nucleophilic amino acid involved has been identified as Glu-537 by using a tritium-labeled inactivator to label the enzyme, then cleaving the labeled protein into peptides and purifying and sequencing the labeled peptide. This residue is conserved in five homologous beta-galactosidases and is different from that (Glu-461) proposed to be the nucleophile (Herrchen, M., and Legler, G. (1984) Eur. J. Biochem. 138, 527-531) on the basis of affinity labeling studies with conduritol C cis-epoxide. A role for glutamic acid residue 461 as the acid/base catalyst is proposed and justified.     

Cellulose-binding polypeptides from Cellulomonas fimi: endoglucanase D (CenD), a family A beta-1,4-glucanase.

Five cellulose-binding polypeptides were detected in Cellulomonas fimi culture supernatants. Two of them are CenA and CenB, endo-beta-1,4-glucanases which have been characterized previously; the other three were previously uncharacterized polypeptides with apparent molecular masses of 120, 95, and 75 kDa. The 75-kDa cellulose-binding protein was designated endoglucanase D (CenD). The cenD gene was cloned and sequenced. It encodes a polypeptide of 747 amino acids. Mature CenD is 708 amino acids long and has a predicted molecular mass of 74,982 Da. Analysis of the predicted amino acid sequence of CenD shows that the enzyme comprises four domains which are separated by short linker polypeptides: an N-terminal catalytic domain of 405 amino acids, two repeated sequences of 95 amino acids each, and a C-terminal domain of 105 amino acids which is > 50% identical to the sequences of cellulose-binding domains in Cex, CenA, and CenB from C. fimi. Amino acid sequence comparison placed the catalytic domain of CenD in family A, subtype 1, of beta-1,4-glycanases. The repeated sequences are more than 40% identical to the sequences of three repeats in CenB and are related to the repeats of fibronectin type III. CenD hydrolyzed the beta-1,4-glucosidic bond with retention of anomeric configuration. The activities of CenD towards various cellulosic substrates were quite different from those of CenA and CenB.     

Structure and binding specificity of the second N-terminal cellulose-binding domain from Cellulomonas fimi endoglucanase C

The 1,4-beta-glucanase CenC from Cellulomonas fimi contains two cellulose-binding domains, CBD(N1) and CBD(N2), arranged in tandem at its N-terminus. These homologous CBDs are distinct in their selectivity for binding amorphous and not crystalline cellulose. Multidimensional heteronuclear nuclear magnetic resonance (NMR) spectroscopy was used to determine the tertiary structure of CBD(N2) in the presence of saturating amounts of cellopentaose. A total of 1996 experimental restraints were used to calculate an ensemble of 21 final structures for the protein. CBD(Nu2) is composed of 11 beta-strands, folded into two antiparallel beta-sheets, with a topology of a jellyroll beta-sandwich. On the basis of patterns of chemical shift perturbations accompanying the addition of cellooligosaccharides, as well as the observation of intermolecular protein-sugar NOE interactions, the cellulose-binding site of CBD(N2) was identified as a cleft that lies across one face of the beta-sandwich. The thermodynamic basis for the binding of cellooligosaccharides was investigated using isothermal titration calorimetry and NMR spectroscopy. Binding is enthalpically driven and consistent with a structural model involving hydrogen bonding between the equatorial hydroxyls of the glucopyranosyl rings and polar amino acid side chains lining the CBD(N2) cleft. Affinity electrophoresis was used to determine that CBD(N2) also binds soluble beta-1,4-linked polymers of glucose, including hydroxyethylcellulose and beta-1,3-1,4-glucans. This study complements a previous analysis of CBD(N1) [Johnson, P. E., Joshi, M. D., Tomme, P., Kilburn, D. G., and McIntosh, L. P. (1996) Biochemistry 35, 14381-14394] and demonstrates that the homologous CBDs from CenC share very similar structures and sugar binding properties.     

Mechanistic consequences of mutation of the active site nucleophile Glu 358 in Agrobacterium beta-glucosidase.

The replacement of the active site nucleophile Glu 358 in Agrobacterium beta-glucosidase by Asn and Gln by site-directed mutagenesis results in essentially complete inactivation of the enzyme, while replacement by Asp generates a mutant with a rate constant for the first step, formation of the glycosylenzyme, some 2500 times lower than that of the native enzyme. This low activity is shown to be a true property of the mutant and not due to contaminating wild-type enzyme by active site titration studies and also through studies of its thermal denaturation and of the pH dependence of the reaction catalyzed. Binding of ground-state inhibitors is affected relatively little by the mutation, while binding of transition-state analogues is greatly impaired, consistent with a principal role for Glu 358 being in transition-state stabilization, not substrate binding. Determination of kinetic parameters for a series of aryl glucosides revealed that the glycosylation step is rate determining for all these substrates in contrast to the native enzyme, where a switch from rate-limiting glycosylation to rate-limiting deglycosylation was observed as substrate reactivity was increased. These results coupled with secondary deuterium kinetic isotope effects of kH/kD = 1.17 and 1.12 measured for the 2,4-dinitrophenyl and p-nitrophenyl glucosides point to a principal role of the nucleophile in stabilizing the cationic transition states and in formation of the covalent intermediate.(ABSTRACT TRUNCATED AT 250 WORDS)