The role of volumetric power input in the growth,morphology, and production of a recombinant glycoprotein by Streptomyces lividans in shake flasks

The impact of flask geometry on Streptomyces lividans growth and morphology, production and O-mannosylation of a recombinant O-glycoprotein (APA from Mycobacterium tuberculosis) was described and associated to the evolution of the volumetric power input (P/V) in three shake flask geometries. During the exponential growth, the highest P/V was found in baffled flasks (BF) with 0.51 kW/m³, followed by coiled flasks (CF) with 0.44 kW/m³ and normal Erlenmeyer flasks (NF) with 0.20 kW/m³ (flasks volume of 250 mL, filling with 50 mL and agitated at 150 rpm). During the stationary phase, P/V decreased 20% in BF and CF, but increased two times in NF, surely due to changes in mycelial morphology and its effects on rheology. Also, NF cultures were carried out at a filling volume and agitation of 15 mL, 150 rpm (15 mL-NF), and 25 mL, 168 rpm (25 mL-NF), in order to raise P/V closely to the values obtained in CF. However, different growth, morphology and recombinant protein productivity were obtained. These data indicate that P/V is not a definitive parameter that can determine bacteria growth and morphology, not even glycoprotein production. But it can be proposed that the oxygen transfer in the center of the pellets and hydromechanical stress might be the more relevant parameters than P/V.     

Improved production of pristinamycin coupled with an adsorbent resin in fermentation by Streptomyces pristinaespiralis

Batch fermentation by Streptomyces pristinaespiralis with the addition of adsorbent resins was used to increase the production of pristinamycin. In consideration of the adsorption capacity and the desorption ability, a polymeric resin, JD-1, was finally selected. The maximum production of pristinamycin in Erlenmeyer flasks went up to 1.13 from 0.4 g l⁻¹, by adding 12% (w/v) resin JD-1 into the culture broth at 20 h after inoculation. In a 3 l bioreactor, pristinamycin fermentation with the addition of 12% (w/v) resin JD-1 at 20 h after inoculation reached 0.8 g l⁻¹, which was a 1.25-fold increase over fermentation without resin.     

Flux balance analysis in the production of clavulanic acid by Streptomyces clavuligerus

In this work, in silico flux balance analysis is used for predicting the metabolic behavior of Streptomyces clavuligerus during clavulanic acid production. To choose the best objective function for use in the analysis, three different optimization problems are evaluated inside the flux balance analysis formulation: (i) maximization of the specific growth rate, (ii) maximization of the ATP yield, and (iii) maximization of clavulanic acid production. Maximization of ATP yield showed the best predictions for the cellular behavior. Therefore, flux balance analysis using ATP as objective function was used for analyzing different scenarios of nutrient limitations toward establishing the effect of limiting the carbon, nitrogen, phosphorous, and oxygen sources on the growth and clavulanic acid production rates. Obtained results showed that ammonia and phosphate limitations are the ones most strongly affecting clavulanic acid biosynthesis. Furthermore, it was possible to identify the ornithine flux from the urea cycle and the α‐ketoglutarate flux from the TCA cycle as the most determinant internal fluxes for promoting clavulanic acid production. © 2015 American Institute of Chemical Engineers Biotechnol. Prog., 31:1226–1236, 2015     

Evolution of Streptomyces pristinaespiralis for resistance and production of pristinamycin by genome shuffling

Improvement of pristinamycin production by Streptomyces pristinaespiralis was performed by using recursive protoplast fusion and selection for improved resistance to the product antibiotic in a genome shuffling format. A 100-mug/ml pristinamycin resistant recombinant, G 4-17, was obtained after four rounds of protoplast fusion, and its production of pristinamycin reached 0.89 g/l, which was increased by 89.4% and 145.9% in comparison with that of the highest parent strain M-156 and the original strain CGMCC 0957, respectively. The subculture experiments indicated that the hereditary character of high producing S. pristinaespiralis G 4-17 was stable. It is concluded that genome shuffling improves the production of pristinamycin by enhancing product-resistance in a stepwise manner. Pristinamycin fermentation experiments by recombinant G 4-17 were carried out in a 5-l fermentor, and its production of pristinamycin reached 0.90 g/l after 60 h of fermentation.     

Improvement of pristinamycin production by genome shuffling and medium optimization for Streptomyces pristinaespiralis

To isolate an improved pristinamycin producing strain of Streptomyces pristinaespiralis, the technique of Genome shuffling was used which resulted in a high-yield recombinant G 3-56 strain. Strain G 3-56 yielded 322 ± 17 mg/L of pristinamycin which was 11.4-fold higher than that of the initial strain and 3.7-fold higher than strain UN-78 which previously had the highest yield of pristinamycin. The genetic characteristics of the recombinant G 3-56 strain was stable as revealed by our subculture experiments. The optimal production medium was determined using the orthogonal matrix method. Under the optimal medium conditions, the maximum yield of pristinamycin was 412 mg/L with about 1.24-fold higher than the original medium.     

Quorum sensing-based metabolic engineering of the precursor supply in Streptomyces coelicolor to improve heterologous production of neoaureothin

Streptomyces are important industrial bacteria that produce pharmaceutically valuable polyketides. However, mass production on an industrial scale is limited by low productivity, which can be overcome through metabolic engineering and the synthetic biology of the host strain. Recently, the introduction of an auto-inducible expression system depending on microbial physiological state has been suggested as an important tool for the industrial-scale production of polyketides. In this study, titer improvement by enhancing the pool of CoA-derived precursors required for polyketide production was driven in a quorum sensing (QS)-dependent manner. A self-sustaining and inducer-independent regulatory system, named the QS-based metabolic engineering of precursor pool (QMP) system, was constructed, wherein the expression of genes involved in precursor biosynthesis was regulated by the QS-responsive promoter, scbAp. The QMP system was applied for neoaureothin production in a heterologous host, Streptomyces coelicolor M1152, and productivity increased by up to 4-fold. In particular, the engineered hyperproducers produced high levels of neoaureothin without adversely affecting cell growth. Overall, this study showed that self-regulated metabolic engineering mediated by QS has the potential to engineer strains for polyketide titer improvement.     

Partitioning of pristinamycins in aqueous two-phase systems: A first step toward the development of antibiotic production by extractive fermentation

The partitioning of pristinamycins was studied in dextran and polyethylene glycol (PEG) aqueous two-phases systems. Pristinamycins partitioned preferentially into the PEG-rich top phase. The partition coefficient was independent of molar mass of PEG and dextran and of antibiotic concentration, but, increased exponentially with the tieline length of the system. Partition of pristinamycins was greatly improved when fatty acids esters of PEG were mixed with PEG. In such mixtures, the partition of coefficient increased up to a value of 24, dependent on the carbon chain length of fatty acids and the modified PEG concentrations. Moreover, in such system, the two groups of pristinamycins, I and II, were extracted in accordance with their hydrophobicity. Recovery of pristinanamycins produced by Streptomyces pritinaespiralis in a fermentation broth was achieved with a dextran/PEG system. Cells were confined into the bottom phase and pristinamycins partitioned in the top phase. However, due to binding of the pristinamycins to the cells, the partition coefficient was slightly lower than of pure antibiotics solutions. (c) 1994 John Wiley & Sons, Inc.     

Influence of dimethylsulfoxide on tylosin production in Streptomyces fradiae

The polyketide aglycone, tylactone (protylonolide), does not normally accumulate during tylosin production in Streptomyces fradiae, suggesting that the capacity of the organism to glycosylate tylactone exceeds the capacity for polyketide synthesis. Consistent with this model, tylosin yields were significantly increased (due to bioconversion of the added material) when exogenous tylactone was added to fermentations. However, tylosin yield improvements were also observed (albeit at lower levels) in solvent controls to which dimethylsulfoxide (DMSO) was added. At least in part, the latter effect resulted from stimulation of polyketide metabolism by DMSO. This was revealed when the solvent was added to fermentations containing the tylA mutant, S. fradiae GS14, which normally accumulates copious quantities of tylactone. Journal of Industrial Microbiology & Biotechnology (2001) 27, 46–51. Received 18 March 2001/ Accepted in revised form 29 May 2001     

Heterologous production of epothilones B and D in Streptomyces venezuelae

Epothilones, produced from the myxobacterium Sorangium cellulosum, are potential anticancer agents that stabilize microtubules in a similar manner to paclitaxel. The entire epothilone biosynthetic gene cluster was heterologously expressed in an engineered strain of Streptomyces venezuelae bearing a deletion of pikromycin polyketide synthase gene cluster. The resulting strains produced approximately 0.1 μg/l of epothilone B as a sole product after 4 days cultivation. Deletion of an epoF encoding the cytochrome P450 epoxidase gave rise to a mutant that selectively produces 0.4 μg/l of epothilone D. To increase the production level of epothilones B and D, an additional copy of the positive regulatory gene pikD was introduced into the chromosome of both S. venezuleae mutant strains. The resulting strains showed enhanced production of corresponding compounds (approximately 2-fold). However, deletion of putative transport genes, orf3 and orf14 in the epothilone D producing S. venezuelae mutant strain, led to an approximately 3-fold reduction in epothilone D production. These results introduce S. venezuelae as an alternative heterologous host for the production of these valuable anticancer agents and demonstrate the possibility of engineering this strain as a generic heterologous host for the production of polyketides and hybrid polyketide-nonribosomal peptides.     

Inter-annual,seasonal and spatial variability in nutrient limitation of phytoplankton production in a river impoundment

We characterize seasonal and spatial patterns in phytoplankton abundance, production and nutrient limitation in a mesotrophic river impoundment located in the southeastern United States to assess variation arising from inter-annual differences in watershed inputs. Short-term (48 h) in situ nutrient addition experiments were conducted between May and October at three sites located along the longitudinal axis of the lake. Nutrient limitation was detected in 12 of the 18 experiments conducted over 2 years. Phytoplankton responded to additions of phosphorus alone although highest chlorophyll concentrations were observed in enclosures receiving combined (P and N) additions. Growth responses were greatest at downstream sites and in late summer suggesting that those populations experience more severe nutrient limitation. Interannual variation in nutrient limitation and primary production corresponded to differences in the timing of hydrologic inputs. Above average rainfall and discharge in late-summer (July–October) of 1996 coincided with higher in-lake nutrient concentrations, increased production, and minimal nutrient limitation. During the same period in 1995, discharge was lower, nutrient concentrations were lower, and nutrient limitation of phytoplankton production was more pronounced. Our results suggest that nutrient limitation is common in this river impoundment but that modest inter-annual variability in the timing of hydrologic inputs can substantially influence seasonal and spatial patterns.     

Oxygen supply to immobilized cells: 1. Oxygen production by immobilized Chlorella pyrenoidosa

Oxygen supply at high cell densities of aerobic organisms is a great problem in immobilized cell preparations. To investigate the possibility of in situ oxygen generation the alga Chlorella pyrenoidosa was immobilized on alginate beads. The conditions for optimal oxygen production were investigated and in long term experiments the preparations were successful for at least 30 days.     

Cloning of a DNA fragment involved in pigment production in Streptomyces avermitilis

Streptomyces avermitilis has the ability to synthesize a diffusible, brown, melanin-like pigment, a common property among many Streptomyces species. A region of the S. avermitilis chromosome involved in the production of this pigment was cloned in Escherichia coli. Production of the brown pigment was attained in E. coli, and is optimal when medium is supplemented with copper ions, tyrosine and IPTG. The cloned S. avermitilis pigment-producing DNA fragment is under the control of the lac promoter carried in the E. coli vector. The gene involved in pigment production could be used as a tool to analyse gene expression in S. avermitilis, and as an alternative cloning marker in Streptomyces-Escherichia coli vectors.     

High activity xylanase production by Streptomyces olivaceoviridis E-86

The effects of different factors on xylanase production by Streptomyces olivaceoviridis E-86 were studied under shake flask conditions. The best initial pH value of growth medium for xylanase production was pH 6.0. Corn cob xylan and beef peptone were the best C source and N source, respectively. The enzyme activity was doubled by addition of 1.5% (v/v) Tween-80 in the medium. By the combination of the above variables, the highest xylanase activity obtained was 1653 U/ml which is the highest ever reported from Streptomyces sp.     

Enhanced production of aureofuscin by over-expression of AURJ3M, positive regulator of aureofuscin biosynthesis in Streptomyces aureofuscus

Aims: The production of aureofuscin is very low in the wild‐type strain. We attempt to increase the production of aureofuscin by over‐expression of a controlling gene in the wild‐type strain. Methods and Results: The aurj3M gene was PCR‐amplified from Streptomyces aureofuscus SYAU0709, ligated into vector pMD19 and sequenced. The predicted translation of the 579‐bp cloned fragment was 97% similar to pimM from Streptomyces natalensis, which has an N‐terminal PAS domain and a LuxR‐type C‐terminal helix–turn–helix. Recombinant bacterial strains were constructed by transforming SYAU0709 with an expression plasmid (pBJJ3M) that contained aurj3M, thereby increasing the number of aurj3M gene copies. Conclusions: Bioassays for the antibiotic compound aureofuscin indicated that the recombinant bacteria had greater antifungal activity than the wild‐type strain. Specifically, the recombinant strain produced approx. 600% more aureofuscin, as quantified by high‐performance liquid chromatography analysis. Significance and Impact of the Study: To our knowledge, this approach has not been attempted in S. aureofuscus before and few genes in the aureofuscin pathway have been cloned and characterized.     

Effects of glucose limitation on biomass and spiramycin production by Streptomyces ambofaciens

Spiramycin production by Streptomyces ambofaciens Sp181110 with glucose as the carbon source was studied under a controlled nutritional environment. In a batch culture, the glucose excess after ammonium depletion led to pyruvate and α-ketoglutarate accumulation. 85 mg/l of spiramycin were produced in less than 70 h during the stationary and maintenance phase on these acids after glucose exhaustion. Fed-batch strategy was designed to study spiramycin production without by-product formation and glucose accumulation. In these conditions, up to 150 mg/l were produced in less than 80 h during the stationary phase on glucose. The antibiotic titre was found independent of the glucose feeding under carbon limitation and the importance of putative intracellular reserves formed after nutrient exhaustion was suggested. Besides, spiramycin production was not inhibited by the limiting flux of glucose.     

Endospore formation by <Emphasis Type="Italic">Streptomyces avermitilis</Emphasis> in submerged culture

The ability of streptomycetes to form endospores during their life cycle was studied in submerged cultures of Streptomyces avermitilis. Submerged S. avermitilis spores were most intensely formed (1) during the culture development cycle on synthetic medium CP1 with glucose under phosphate limitation and (2) in autolysing cell suspensions of high density obtained by tenfold concentration in phosphate buffer (pH 7.2) with 0.2% CaCl₂ of stationary-phase cells grown in synthetic medium. Endospores of S. avermitilis formed in submerged cultures shared the major characteristics of specialized microbial resting forms: heat resistance, resistance to lysozyme, ability to retain the main species-specific features, and ultrastructural organization characteristic of endospores. They can be considered a resting form of streptomycetes alternative to the spores formed exogenously on aerial mycelium in surface cultures.__________Translated from Mikrobiologiya, Vol. 74, No. 2, 2005, pp. 204–214.Original Russian Text Copyright © 2005 by Filippova, Gorbatyuk, Poglazova, Soina, Kuznetsov, El-Registan.     

途径特异性调控因子介导的链霉菌来源天然产物的产量提升

链霉菌是活性天然产物的重要来源.基因组学研究揭示了链霉菌有巨大的生物合成潜力,平均每株菌拥有20-40个生物合成基因簇.在常规的实验室条件下,大多数链霉菌来源的天然产物产量较低,影响了对其进一步研究和产业化开发.由于链霉菌中天然产物的生物合成受到严格的调控,对于这些调控因子和调控网络的深入研究将有力地促进链霉菌来源的天...     

Medium optimization for the production of glucose isomerase from thermophilic Streptomyces thermonitrificans

A thermophilic strain of Streptomyces thermonitrificans produced a high activity of intracellular glucose isomerase (12 U/ml) when grown in a medium containing 1% (w/v) xylose, supplemented with 2% (w/v) sorbitol as the second carbon source, at 50°C for 16 h. Addition of Mg²⁺ enhanced enzyme production but the organism could grow and produce the enzyme in the absence of Co²⁺.The authors are with the Division of Biochemical Sciences, National Chemical Laboratory, Pune 411 008, IndiaNCL Communication No. 5813