Counterstaining Golgi-Cox Impregnations with Luxol Fast Blue as a Myelin Stain

Immerse pieces of brain tissue 4 wk in solutions A and B, mixed just before use: A. K₂Cr₂O₇, 1 gm; HgCl₂, 1 gm; boiling distilled water, 85 ml. Boil A for 15 min, cool to 2 C and add: B. K₂CrO₄, 0.8 gm; Na₂WO₄, 0.5 gm; distilled water, 20 ml. Rinse in water and immerse 24 hr in LiOH, 0.5 gm; KNO₃, 15 gm; distilled water, 100 ml. Wash 24 hr in several changes of 0.2% acetic acid and then for 2 hr in tap water. Dehydrate and embed in celloidin. Process a 60 μ section through 70 and 95% ethanol, a 3:1 mixture of absolute ethanol and chloroform, and toluene. Immerse it for 5 min in a solution containing methyl benzoate, 25 ml; benzyl alcohol, 100 ml; chloroform, 75 ml. Orient the section on a chemically clean slide and let air-dry 5-10 min. Process through toluene, 3:1 ethanol-chloroform and 95% ethanol. Place the section for 5-60 min at 60 C in a solution made up of: Luxol fast blue G (Matheson, Coleman and Bell), 1 gm; 95% ethanol, 1000 ml; 10% acetic acid, 5 ml. Hydrate to water and immerse in 0.05% Li₂CO₃ for 3-4 min. Differentiate in 70% ethanol and place in water. Immerse for 5-15 min in a mixture of two solutions: A. cresylechtviolet (Otto C. Watzka, Montreal), 2 gm; 1 M acetic acid, 185 ml; B. 1 M sodium acetate, 15 ml; distilled water, 400 ml; absolute ethanol, 200 ml. Dehydrate to 3:1 ethanol-chloroform. Clear in toluene and apply a coverslip. The technique produces fast Golgi-Cox impregnated neurons against a background of counterstained myelinated fibers. Patterns of the myelinated fibers can be used to localize impregnated neurons.     

Differentiated Staining of Osmium Tetroxide-Fixed, Vestopal-w-Embedded Tissue in thin Sections

Tissues were fixed at 20° C for 1 hr in 1% OsO₄, buffered at pH 7.4 with veronal-acetate (Palade's fixative), soaked 5 min in the same buffer without OsO₄, then dehydrated in buffer-acetone mixtures of 30, 50, 75 and 90% acetone content, and finally in anhydrous acetone. Infiltration was accomplished through Vestopal-W-acetone mixtures of 1:3, 1:1, 3:1 to undiluted Vestopal. After polymerisation at 60° C for 24 hr, 1-2 μ sections were cut, dried on slides without adhesive, and stained by any of the following methods. (1) Mayer's acid hemalum: Flood the slides with the staining solution and allow to stand at 20°C for 2-3 hr while the water of the solution evaporates; wash in distilled water, 2 min; differentiate in 1% HCl; rinse 1-2 sec in 10% NH,OH. (2) Iron-trioxyhematein (of Hansen): Apply the staining solution as in method 1; wash 3-5 min in 5% acetic acid; restain for 1-12 hr by flooding with a mixture consisting of staining solution, 2 parts, and 1 part of a 1:1 mixture of 2% acetic acid and 2% H₂SO₄ (observe under microscope for staining intensity); wash 2 min in distilled water and 1 hr in tap water. (3) Iron-hematoxylin (Heidenhain): Mordant 6 hr in 2.5% iron-alum solution; wash 1 min in distilled water; stain in 1% or 0.5% ripened hematoxylin for 3-12 br; differentiate 8 min in 2.5%, and 15 min in 1% iron-alum solution; wash 1 hr in tap water. (4) Aceto-carmine (Schneider): Stain 12-24 hr; wash 0.5-1.0 min in distilled water. (5) Picrofuchsin: Stain 24-48 hr in 1% acid fuchsin dissolved in saturated aqueous picric acid; differentiate for only 1-2 sec in 96% ethanol. (6) Modified Giemsa: Mix 640 ml of a solution of 9.08 gm KH₂PO₄ in 1000 ml of distilled water and 360 ml of a solution of 11.88 gm Na₂HPO₄-2H₂O in 1000 ml of distilled water. Soak sections in this buffer, 12 hr. Dissolve 1.0 gm of azur I in 125 ml of boiling distilled water; add 0.5 gm of methylene blue; filter and add hot distilled water until a volume of 250 ml is reached (solution “AM”). Dissolve 1.5 gm of eosin, yellowish, in 250 ml of hot distilled water; filter (solution “E”). Mix 1.5 ml of “AM” in 100 ml of buffer with 3 ml of “E” in 100 ml of buffer. Stain 12-24 hr. Differentiate 3 sec in 25 ml methyl benzoate in 75 ml dioxane; 3 sec in 35 ml methyl benzoate in 65 ml acetone; 3 sec in 30 ml acetone in 70 ml methyl benzoate; and 3 sec in 5 ml acetone in 95 ml methyl benzoate. Dehydrated sections may be covered in a neutral synthetic resin (Caedax was used).     

Enhanced Reliability in Silver Impregnation of Terminal Axonal Degeneration-Original Nauta Method

Brains of rat with surgical lesions 3-5 days old are fixed in 10% neutralized formalin (excess of CaCO₃), 20 μ serial frozen sections cut therefrom and kept in neutralized formalin for an additional 24-48 hr. The sections are soaked in distilled water 12-24 hr, transferred to 50% alcohol containing 0.75 ml of concentrated NH₄OH (sp. gr. 0.91) per 100 ml 12-24 hr, placed in distilled water 2-3 hr and then in silver-pyridine solution (AgNO₃ 3% aq., 20 ml; pyridine, 1 ml) for 48 hr. Test sections are transferred directly to each one of 3 ammoniated silver-solutions, pH 12.8, 13.0 and 13.2, made as follows: To 200 ml of solution 1 (silver nitrate, 6.4 gm; alcohol 96%, 220 ml; NH₄OH (sp. gr. 0.91), 28 ml and distilled water, 440 ml) is added respectively 8-12 ml, 12-16 ml and 16-20 ml of solution 2 (2% NaOH) to give the pH desired. The test sections are studied and the optimal ammoniated silver solution chosen. Two baths of ammoniated silver are used, the section placed with continuous agitation into the first bath for 30 sec and the second bath for 60 sec. The sections are then transferred directly into a reducing bath (formalin 10%, 2ml; alcohol 96%, 5 ml; citric acid 1%, 1.5 ml and distilled water, 4.5 ml) for 2 min and from there to 5% Na₂S₂O₃ for 1 min, rinsed in 3 changes of distilled water, dehydrated and mounted.     

Bromphenol Blue as A Stain for Muscle Striations

Sections from formalin-fixed muscle are stained 4-24 hr with a 0.05% solution of bromphenol blue in 2% acetic acid, rinsed with water and placed in 0.5% acetic acid for 5-10 min. They are then treated 30 sec with tap water substitute (KHCO₃, 0.2 gm; MgSO₄, 2 gm; distilled water, 100 ml), rinsed, dehydrated in alcohol, cleared in xylene and covered in a polystyrene mountant Striatums of both cardiac and skeletal muscle fibers are fully resolved under oil immersion, against the blue background of the other parts of the fibers.     

Handling Germinated Pollen on Millipore Membrane During the Feulgen and Autoradiographic Procedures

To prevent loss of pollen during the Feulgen's procedure, the pollen was grown on an autoclaved membrane filter (Millipore AA WP 025 00) in contact with a sterilized medium containing agar 0.5-1%, sucrose according to the genus (Malus 0.3-0.5 M; Persica and Tulipa 0.4 M), and H₃BO₃, 0.01%. To fix the germinated pollen of most species, the membrane was placed for 2 hr to overnight at 2-4 C on filter paper wet with the following mixture: OsO₄, 1 gm; CrO₃, 1.66 gm; and distilled water, 233 ml. To fix Persica pollen, 10% of glacial acetic acid had to be added to the fixative. Washing with distilled water and bleaching with a mixture of 3% H₂O₂ and sat. aq. ammonium oxalate, 1:1, were performed also on filter paper. Similarly, the preparation was processed for Feulgen staining by use of pieces of filter paper wet with the required fluids. Hydrolysis preceding the Schiff's reagent was performed at room temperature with 5 N HCl for 18 min. The differentiation after the Schiff's action was with 2% K₂S₂O₅ buffered to pH 2.3 with 9 ml of phosphate buffer (KH₂PO₄, 1.4 gm; conc. HCl, 0.35 ml and distilled water to make 100 ml). The stained pollen was floated off the membrane with a drop of glacial acetic acid to a gelatinized or an albumenized slide, and squashed. When the coverslip is removed the preparation may be either dehydrated and mounted or coated with autoradiographic film.     

Gross Demonstration of the Mammalian Atrioventricular Bundle by A Periodic Acid-Schiff Procedure

The following procedure stains the atrioventricular conduction system selectively. (1) Wash the fresh heart with physiological saline solution to free it of blood; (2) fix it in 10% formalin containing 0.5% HIO₄ for 1 hr; (3) wash in 3 changes of distilled water for 20 min; (4) keep in 80% alcohol for 12 hr to 2 wk; (5) wash with distilled water; (6) treat with a dilute Schiff's reagent containing 0.1 gm of basic fuchsin per 100 ml for 0.5-2 min; (7) rinse in three changes of 2% Na₂SO₃ in 0.2 N HCI for 3-5 min; (8) wash and examine in 80% alcohol; store in 80% alcohol.     

Myelin Impregnation: An Improved Golgi-Cox Modification

Optic tecta of goldfish were coated with egg yolk and immersed for only one week in one of the following impregnation fluids: a) Solution A + B; A = 1 g K₂Cr₂O₇ and 1 g HgCl₂ boiled for 15 min in 85 ml distilled water and allowed to cool; B = 0.8 g K₂Cr₂O₇ and 0.5 g KWO₄ dissolved in 20 ml distilled water, b) Solution A + B two volumes diluted with boiled distilled water, c) Solution A + B four volumes diluted with boiled distilled water. Each tectum was immersed 6 hr in 100 ml distilled water containing 0.5 g LiOH and 15 g KNO₃, washed 18 hr in 500 ml 0.2% acetic acid, dehydrated with ethanol, and embedded in low viscosity nitro cellulose. Sections were cut at 100 pm with a rotary microtome after clearing with cedarwood oil. Methods b) and c) have two advantages compared with method a), the original Golgi-Cox method. First, more cells are impregnated, especially in the layers extending 200-400 μm below the surface, and dendrites as well as unmyelinated axons are well impregnated. Second, myelin sheaths are impregnated and can be recognized by their peculiar chain-like appearance. The described Golgi-Cox modification offers an appropriate method to study the morphology of superficially located nervous tissue.     

A Copper Sulfate-Silver Nitrate Method for Nerve Fibers of Planarians

For staining in toto, planarians are fixed in a mixture of 10 ml of commercial formalin, 45 ml of 95% ethanol and 2 ml of glacial acetic acid. After treatment with 70% ethanol 3-10 days, they are washed in distilled water and immersed in 10% CuSO₄. 5H₂O for 3 hr at 50° C, transferred without washing to 1% AgNO₃ for 1.0-1.5 hr at 50° C; and then developed in: 10 ml of 1% pyrogallol, 100 ml of 56% ethanol and 1 ml of 0.2% nitric acid. Gold toning, 5% Na₂S₂O₃ and dehydration follow as usual. For staining sections, material is fixed in the same fixative, embedded in paraffin and sectioned at 10 μ. After bringing sections to water, they are immersed in 20% CuSO₄. 5H₂O for 48 hr at 37° C; then rinsed briefly in distilled water and placed in 7% AgNO₃ for 24 hr at 37° C. They are washed briefly in distilled water and reduced in: hydroquincne, 1 gm; Na₂SO₃, 5 gm and distilled water 100 ml. Gold toning, followed by 5% Na₂S₂O₃ and dehydration completes the process. Any counterstaining may follow.     

Staining Tissue of the Central Nervous System with Luxol Fast Blue and Neutral Red

The tissue is fixed in 10% neutral saline formalin for 1 day to 3 wk depending on the size of the block, dehydrated and embedded in paraffin. The sections are stained at 57° C for 2 hr, then at 22° C for 30 min, in a 0.0125% solution of Luxol fast blue in 95% alcohol acidified by 0.1% acetic acid. They are differentiated in a solution consisting of: Li₂CO₃, 5.0 gm; LiOH-H₂O, 0.01 gm; and distilled water, 1 liter at 0-1° C, followed by 70% alcohol, and then treated with 0.2% NaHSO₃. They are soaked 1 min in an acetic acid-sodium acetate buffer 0.1 N, pH 5.6, then stained with 0.03% buffered aqueous neutral red. Sections are washed in distilled water, 1 sec, then treated with the following solution: CuSO₄·5H₂O, 0.5 gm; CrK(SO₄)₂·12H₂O, 0.5 gm; 10% acetic acid, 3 ml; and distilled water, 250 ml. Dehydration, clearing and covering complete the process. Myelin sheaths are stained bright blue; meninges and the adventitia of blood vessels are blue; red blood cells are green. Nissl material is stained brilliant red; axon hillocks, axis cylinders, ependyma, nuclei and some cytoplasm of neuroglia, media and endothelium of blood vessels are pink.     

Staining Reticulin with Gold

This bromine-iodine-gold chloride-reduction sequence stains reticulin in formalin-fixed paraffin sections without risk of sections becoming detached. After hydration, sections are exposed to 0.2% bromine water containing 0.01% KBr for 1 hr, then rinsed and placed for 5 min in a solution consisting of KI, 2 gm; iodine crystals, 1 gm; and distilled water, 100 ml. After this the sections are well washed in distilled water, immersed for 5 min in 1% w/v aqueous solution of chloro-auric acid, again rinsed in distilled water, and the gold is reduced by placing in freshly made 3% H₂O₂ for 2-4 hr at 37 C, or in 2% oxalic acid for 1-3 hr at the same temperature.     

Silver Protein Staining of Nerve Fibers in Celloidin Sections

Celloidin sections from formalin-fixed brain and spinal cord of primates are stored in 70% alcohol after cutting, soaked in 2% pyridine in 50% alcohol for 6-8 hr at 37 C, and transferred to 1% concentrated NH₄OH in 50% alcohol 15-18 hr at 20-25 C. After washing and flattening, the sections are transferred to 1% silver protein solution containing 30 ml of 0.2 M H₃BO₃/100 ml. Impregnation is accomplished in 50 ml screw-top jars, 50 mm in diameter, which are filled to a depth of 35 mm, and have 1 gm of copper foil, 0.002 inch thick added. The foil is folded in loose accordion-fashion, pierced and threaded, cleaned in 5% HNO₃, rinsed in distilled water, and suspended in the solution just above the sections by fastening the thread to the jar lid. The sections are impregnated for 24 hr at 37 C, rinsed in distilled water, reduced in a solution of 5% Na₂SO₃ and 1% hydroquinone for 10 min, washed in distilled water and toned in 0.2% gold chloride for 5 min. After rinsing in distilled water, the sections are transferred to 1% oxalic acid for 45-60 sec, washed in distilled water and placed in 5% Na₂S₂O₃ for 5 min. Sections are then washed, dehydrated to 95% alcohol, cleared in terpineol, followed by 3 changes in xylene, and mounted.     

Staining Pericellular Boutons of Glutaraldehyde-Fixed Nervous Tissue; A Chromation-Silvering Sequence for Frozen Sections

After fixing in phosphate-buffered 5% glutaraldehyde, pH 6.8, by perfusion, brains were sliced to 3-5 mm pieces which were placed in the fixative for 5-7 days. The pieces were washed through several changes of 2.26% NaH₂PO₄ for 12 hr, 30 μ frozen sections cut, and mordanted 2 days in an equal-parts mixture of 3.5% CrO₃ and 5% Na-tartrate, which had been aged at 20-25 C for 20 days prior to use. After washing in distilled water, the sections were put into a solution containing AgNO₃, 20 gm; and KNO₃, 15 gm, in distilled water, 80 ml; at 30 C for 1.5-2 hr, then reduced at 40-45 C in three pyrogallol solutions as follows: 1-2 sec in 1% pyrogallol in 55% alcohol; 3-4 sec in a 0.67% solution in 33% alcohol, and 5-7 sec in a 0.5% solution in 25% alcohol. Gold toning is optional; dehydration, clearing and covering, routine. The technic shows particularly the perisomatic fibers, boutons en passant and boutons termineaux. Fibers in nerve tracts may be visible but lightly stained; cell nuclei may be dark, but the cytoplasm remains pale.     

The Quantitative Determination of Osmium Tetroxide in Fixatives

This rapid spectrophotometric method for determining the OsO₄ concentration in fixative and stock solutions is based on the reduction of OsO₄ by acidified KI to the blue species of OsI₆ =, which is then determined at 649 mµ. The salt K₂OsI₆ has been isolated from the reaction mixture and characterized. Method: A I ml aliquot of the solution, containing up to 3% OsO₄, is diluted to 100 ml with distilled water. To 1 ml of the diluted solution is added, in order: distilled water, 2 ml; 1 M HCI, 1 ml; and 1 M KI, 1 ml. Optical density at 649 mµ is read from 10-120 min thereafter. OsO₄ concentration is calculated from the measured molecular extinction coefficient of OsI₆ =, 4400 liter/mole cm.     

Staining and Mounting Helminths

The following procedure is recommended: Fix ces-todes and trematodes (while held flat between glass slides) 0.5-2.0 hr. in the following mixture: formalin, 15; acetic acid (gl.), 5; glycerol, 10; 95% ethyl alcohol, 24; distilled H₂O, 46; all proportions by volume. After freeing them from the slides, wash thoroughly in running water and stain immediately thereafter. Stock staining solution: ferric ammonium alum (violet cryst.), 2 g.; distilled H₂O (cold) 100 ml.; after solution, add 2 ml. concentrated H₂SO₄, bring to a boil; add 1 g. coelestin blue B (Nat. Aniline), boil 3-5 min.; cool and add 10 ml. absolute methyl alcohol and 10 ml. glycerol. Dilute 1 vol. with 3 vol. distilled H20 for use. Stain 5-30 min., depending on size of specimens. Wash with 2 changes 0.5 hr. each of distilled H₂O, then 50% isopropyl alcohol 12-16 hr., 50% isopropyl alcohol 2 hr., followed by graded isopropyl alcohol for dehydration. Ether: ethyl alcohol (equal parts), 1 hr., is followed by embedding in celloidin in a sheet just thick enough to cover the specimens. Trim embedded specimens and dehydrate with isopropyl alcohol, 80%, 90% and absolute. Clear in beechwood creosote. Mount in balsam with cover glasses that overlap the edges of the celloidin 1-2 mm. While drying at 37°C, refill edges of mount with fresh balsam as needed. When dry, remove excess balsam and ring the edges with ordinary gloss enamel paint.     

The Gallocyanin-Chrome Alum Stain; Influence of Methods of Preparation on Its Activity and Separation of Active Staining Compound

A dye, which is probably a cationic chelate, has been separated from a gallocyanin-chrome alum staining solution and prepared in the dry form. This dye is apparently the major staining compound. To prepare the chelate or dye, dissolve 150 mg of gallocyanin and 15 gm of chrome alum in 100 ml of distilled water and boil for 10-20 min, cool, filter, wash the precipitate with sufficient distilled water to restore the volume of the filtrate to 100 ml, then add concentrated NH₄OH until the pH is raised to 8-8.5. Filter, with suction, through a medium porosity fritted glass funnel. Wash with 100-200 ml of anhydrous ethyl ether and air dry the precipitate. This ratio of chrome alum to gallocyanin and the 10-20 min boiling time are optimal for preparation of the staining solution, which may be used either for staining or for separation of the chelate in its dry form. From the dried chelate, the staining solution is prepared as a 3% solution in1 N H₂SO₄ and a staining time of 16-24 hr is required. No differentiation is needed; the stain is self-limiting.     

Staining Residual Lipids in Ultrathin Sections of Tissues Embedded in Polyester Resin

Rat suprarenal glands fixed in Palade's 1% OsO₄, buffered at pH 7.7 with veronal-acetate, to which 0.1% MgCl₂ was added, were embedded in Vestopal-W and sectioned at 0.2-1 µ. The sections were attached to slides by floating on water, without adhesive, and drying at 60-80° C, placed in acetone for 1 min and then treated with the following staining procedure: Place the preparation in a filtered solution of oil red O, 1 gm; 70% alcohol, 50 ml; and acetone, C.P., 50 ml; for 0.5-1 hr. Rinse in absolute ethyl alcohol; drain; counterstain with 0.5% aqueous thionin for 5 min; rinse in distilled water; drain; stain in 0.2% azure B in phosphate buffer at pH 9, for 5 min. Dry and apply a drop of immersion oil directly on the section. The preparations are temporary. Ciaccio-positive lipids, rendered insoluble by OsO, fixation, stained red to ochre.     

A Modified Pyridine-Silver Stain for Teased Preparations of Motor and Sensory Nerve Endings in Skeletal Muscle

This technique has been developed especially to stain sensory receptors which have been localised intramuscularly by electrophysiological means. Rat intertransverse caudal muscles, removed immediately after death, are fixed for 24 hr in a freshly prepared mixture of absolute ethyl alcohol, 4.5 ml; distilled water, 5 ml; and concentrated HNO_a, 0.1 ml. After a further 24 hr in 10 ml of absolute ethyl alcohol containing 0.1 ml of ammonia solution (sp. gr. 0.88), the muscles are washed in distilled water for 30 min and placed in full strength pyridine for 2 days. They are then washed for 24 hr in distilled water (changed 5-8 times) and left in 2% AgNO₃, in the dark for 3 days at 25 C. Following reduction in 10 ml of 5% formic acid containing 0.4 gm of pyrogallol for 6-24 hr, the specimens are washed briefly in distilled water and stored in pure glycerol. The nerve endings can then be teased out and mounted in glycerol, under cover glasses ringed with a waterproof cement. The advantage of this method is that it gives consistently good staining of receptors and motor end-plates in small muscles of the rat     

Histochemical Demonstration of Pyrophosphatase

Fresh tissue slices were fixed in 5% formalin containing 0.9% NaCl for 10-20 min and frozen sections therefrom floated for 3 hr at 37°C on an incubating mixture made as follows. Sodium pyrophosphate (Na₄P₂O₇-12H₂O), 1.088 gm was dissolved in 20-30 ml of distilled water and to this was added ferric chloride (FeCl₃-6H₂O), 0.61 gm dissolved in 10-15 ml of water. The precipitate was just dissolved by cautiously adding 5-10% aqueous Na₂CO₃ solution and the pH adjusted to 7.2 with 1N HCl. The volume was made up to 100 ml and 0.9 gm of NaCl added. Before use, 1 ml of 10% Mg(NO₃) was added. After incubation, sections were washed 10-15 min in 0.9% NaCl, then mounted on glass slides and air-dried. When dry, the slides were immersed in 0.9% NaCl containing 0.2-0.5% ammonium sulfide for 2-3 min, then dehydrated rapidly through graded alcohols, cleared, and covered in balsam. Sites of pyrophosphatase activity stained in various shades of green. Acid pyrophosphatase also was histochemically demonstrated by the same principle, excepting that the substrate solution was adjusted to pH 3.7-4.0 with acetate buffer. The pattern of distribution of pyrophosphatase and glycerophosphatase was almost identical.     

Correlation of CrystaL Growth with the Staining of Axons by the Golgi Procedure

The surface of the specimens subjected to a modified Golgi technique (formalin fixed material; specimens in the following solution for 8-10 days at 27 C: 3% K₂Cr₂O₇, 100 ml, with the addition of 2.5-10 ml of 10% formalin and 6-25 gm of sucrose; then in 0.75% AgNO₃ for at least 2 days at 27 C) is sometimes covered with a fur of filamentous crystals and sometimes with a powdery precipitate of laminar crystals. In a series of experiments in which about 500 blocks of tissue were treated with variations of the staining procedure, good axonal stain was positively correlated with the appearance of filamentous crystals. These filaments have a thickness of 1-4 μ and grow at a rate of 160-330 μ/hr, reaching a length of 2-7 mm.     

Removal of Ribonucleic Acid from Bacterial Cells by Dilute Salt Solutions

Bacterial cells were impressed upon a clean glass slide, fixed in ethyl alcohol and immersed at 37°C in either of the following two salt solutions: (A) NaCl, 7.8 gm; KCl, 0.7 gm; distilled water, 1000 ml; adjusted to pH 7.0; or (B) 0.1M NaH₂PO₄, 400 ml; 0.1M Na₂HPO₄, 600 ml; KCl, 0.7 gm. After 1-5 hr soaking to remove ribonucleic acid, the slide was stained by Giemsa's method as usual. The staining revealed slender chromatinic bodies with reasonable clarity extending the whole diameter of the moderately swollen cell. The results of this method seemed to be much like those obtained after ribonuclease digestion.