Synthesis of chiral alpha-amino aldehydes linked by their amine function to solid support.

The anchoring of an alpha-amino-acid derivative by its amine function on to a solid support allows some chemical reactions starting from the carboxylic acid function. This paper describes the preparation of alpha-amino aldehydes linked to the support by their amine function. This was performed by reduction with LiAlH4 of the corresponding Weinreb amide linked to the resin. The aldehydes obtained were then involved in Wittig or reductive amination reactions. In addition, the linked Weinreb amide was reacted with methylmagnesium bromide to yield the corresponding ketone. After cleavage from the support, the compounds were obtained in good to excellent yields and characterized.     

Solid-phase synthesis of chiral stationary phases based on 2,4,5,6-tetrachloro-1,3-dicyanobenzene derivatives spaced from N-3,5-dinitrobenzoyl alpha-amino acids: comparative study of their resolution efficacy

Two new chiral stationary phases, 3-[5-chloro-1,3-dicyano-2,4-[2'-(N'-1,3-dinitrobenzoyl-D-phenylglycinyl) aminoethyl]aminophen-1-yl] aminopropyl silica (CSP-1) and 3-[5-chloro-1,3-dicyano-2,4-[2'-(N'-1,3-dinitrobenzoyl-L-leucinyl) aminoethyl] aminophen-1-yl] aminopropyl silica (CSP-2), were prepared by solid-phase synthesis. They comprise chiral unit, 3,5-dinitrobenzoyl derivative of the amino acid, D-PhGly or L-Leu, bound via spacer 1,2-diaminoethane to 2,4-positions of the persubstituted benzene ring, derived from compound 1, and possess pseudo-C2 symmetry. Preparation of model compounds 6 and 7 confirmed the structure of chiral selectors, which comprise pi-donor persubsituted aromatic ring and two strong pi-acceptor 3,5-dinitrobenzoyl amido units. CD spectra of model selectors 6 and 7, run in DMSO above 250 nm, exhibit negative exciton coupling (EC) between pi-acceptor and pi-donor chromophores, C(1) symmetric model compound 8 exhibited much weaker EC and 9, devoid of pi-donor unit, does not exhibit any significant CD. Combined pi-donor and pi-acceptor properties enable the new CSPs to separate a broad range of racemates. The columns with CSP-1 and CSP-2 were tested for the separation of 22 racemates by HPLC with two different mobile phase systems and the results are compared with those obtained by using a structurally related commercial column.     

Optimized selective N-methylation of peptides on solid support.

Peptides containing N(alpha)-methylamino acids exhibit interesting therapeutic profiles and are increasingly recognized as potentially useful therapeutics. Unfortunately, their synthesis is hampered by the high price and nonavailability of many N(alpha)-methylamino acids. An efficient and practical three-step procedure for selective N-methylation of peptides on solid support is described. The procedure was based on the well known solid-phase N-methylation of N(alpha)-arylsulfonyl peptides, which was improved by using dimethylsulfate and the less expensive DBU as base. Every step of the procedure, amine activation by an o-nitrobenzenesulfonyl group, selective N-methylation and removal of the sulfonamide group, was optimized in respect of time and economy. The described optimized three-step procedure is performed in 35 min without solvent changes, instead of 3 h. Tripeptides (Fmoc-Phe-MeXaa-Leu-OH) containing N-methylated common amino acids were also prepared using the optimized procedure to demonstrate its compatibility with these amino acids. The described procedure allows an efficient synthesis of N(alpha)-methylamino acid containing peptides in a very short time using Fmoc solid-phase peptide synthesis.     

HRMAS NMR observation of beta-sheet secondary structure on a water swollen solid support.

In this paper HRMAS NMR was used to investigate whether peptides on a peptidyl resin swollen in aqueous solution can adopt an intramolecular beta-sheet structure. A model peptide YQNPDGSQA, that was previously shown to adopt such a secondary structure in solution, (Blanco et al, J. Am. Chem. Soc., 1993) was grafted onto three different solid supports that swell in aqueous solution to examine the influence of the resin on the structure. Both parameters of resin loading and pH inside the swollen peptidyl resin proved to be important for the physicochemical behaviour of the peptide on the support.     

Solid phase synthesis of hydrophobic difficult sequence peptides on BDDMA-PS support.

This article illustrates the successful and efficient solid phase assembly of hydrophobic difficult sequence peptides following both t-Boc and Fmoc chemistry. The peptides were synthesized on an optimized 1,4-butanediol dimethacrylate-crosslinked polystyrene support (BDDMA-PS). Four difficult sequence test peptides, VAVAG, VIVIG, QVGQVELG and VQAAIDYING, were synthesized in relatively good yield and purity without any aggregation problems. The peptides were assembled on chloromethylated and 4-hydroxymethylphenoxymethyl (HMP) BDDMA-PS resins. The peptides were fabricated using Boc amino acid 1-hydroxybenzotriazolyl and Fmoc amino acid pentafluorophenyl active esters in coupling reactions. The peptides after synthesis were cleaved from the polymeric support by exposing the peptidyl resin to 90% trifluroacetic acid/5% thioanisole/5% EDT mixture. The HPLC and MALDI TOF MS studies of the peptides revealed the high homogeneity of the synthesized peptides. Chloromethylated resin having a functional group loading of 1.14 mmol Cl/g was used for the synthesis. The yield and homogeneity of these peptides synthesized using the new support were high when compared with the conventional DVB-PS resin.     

Improved solid phase synthesis of luteinizing hormone releasing hormone analogues using 9-fluorenylmethyloxycarbonyl amino acid active esters and catalytic transfer hydrogenation with minimal side-chain protection and their biological activities

Using mainly 9-fluorenylmethyloxycarbonyl amino acid 2, 4, 5-trichlorophenyl esters in the presence of 1-hydroxybenzotriazole and the solid supportp-alkoxybenzyl alcohol resin, synthesis of luteinizing hormone releasing hormone analogues was carried out with minimal side-chain protection. Catalytic transfer hydrogenation was employed for removal of NO₂ and Z-groups from Arg and < Glu respectively avoiding the use of HF and this led to good yields. An aromatic, hydrophilic amino acid, D-(p-hydroxyphenyl) glycine was incorporated into luteinizing hormone releasing hormone molecule along with other modifications. The agonistic as well as antagonistic activities of all the peptides have been studied     

Optimization of the chiral separation of some 2-arylpropionic acids on an avidin column by modeling a combined response

The enantiomeric separation of some nonsteroidal antiinflammatory drugs was investigated on an avidin column. An experimental design approach (central composite design) was used to evaluate the effects of three method parameters (pH, concentration of organic modifier, and buffer concentration) on the analysis time and the resolution, as well as to model these responses. This revealed that the organic modifier concentration and sometimes the pH are significant parameters to control because of their influence on both analysis time and resolution. Furthermore, the central composite design results were combined in a multicriteria decision-making approach in order to obtain a set of optimal experimental conditions leading to the most desirable compromise between resolution and analysis time.     

Synthesis of ‘head‐to‐tail’ cyclized peptides on solid support using a chelating amide as new orthogonal protecting group

The synthesis of ‘head‐to‐tail’ cyclized peptides requires orthogonal protecting groups. Herein, we report on the introduction of bis(2‐pyridylmethyl)amine (Bpa) as a new protecting group for carboxylic functions in SPPS. The synthesis of the Bpa‐protected aspartic acid was straightforward, and its utility was investigated under standard peptide synthesis conditions. The new protecting group was cleaved in a very mild way using Cu(OAc)₂ and 2‐(trimethylsilyl)ethanol as nucleophile in a microwave oven without affecting other groups. Hence, the new group is ideally suited for the synthesis of ‘head‐to‐tail’ cyclic peptides, as demonstrated for a cyclic pentapeptide and cyclic hexapeptides. Copyright © 2015 European Peptide Society and John Wiley & Sons, Ltd.     

Improved preparation of amyloid-beta peptides using DBU as Nalpha-Fmoc deprotection reagent.

Previous studies have shown the amyloid peptides, Abeta 1-40/42, to be exceptionally difficult to assemble by Fmoc-solid phase peptide synthesis due to the high hydrophobicity of the C-terminal segment and resulting on-resin aggregation. We found that the use of the stronger and more efficient base, DBU, at a concentration of 2% in DMF for Nalpha-Fmoc deprotection allowed substantially improved continuous flow solid phase assembly of the model peptide Abeta 29-40/42 fragments. This suggested that, at least for these sequences, incomplete deprotection was a greater problem than incomplete amino acid acylation. This base was then used during the synthesis of both Abeta 1-40 and Abeta 1-42, up to and including Ser8, from which point 20% piperidine in DMF was utilized so as to avoid potential aspartimide formation at Asp7. By this means, the deprotection efficiency through the difficult C-terminal portion of the sequence was much improved and resulted in increased availability of terminal amino groups for acylation. This simple strategy that obviates the need for special conditions significantly improved crude peptide quality and allowed considerable facilitation of subsequent purification.     

Synthesis of of beta-amyloid precursor peptide and presenilin segments.

It seems likely that the beta-amyloid precursor protein (APP) and the presenilins (PS-1/2) play important roles in the development of Alzheimer's disease (AD). Attempts to mimic the biochemical actions of these proteins are often made by the application of fragments of these proteins. However, the synthesis of these segments by conventional methods of peptide synthesis is problematic. We have synthesized several C-terminal fragments of APP and PS-1/2 by solid-phase synthesis through combination of automatic and manual methods of synthesis. This permits solution of the 'difficult sequences' in the solid-phase synthesis of these peptides. Some details of the syntheses of nine segments are presented in this paper.     

Gel-Phase synthesis of hydrophobic (thr14) (thr19) galanin (1 -19) fragment on a high capacity flexible crosslinked polystyrene support.

A hydrophobic analogue of human galanin (1-19) fragment has been synthesized using Boc/Bzl tactics to demonstrate the synthetic utility of the flexible crosslinked polystyrene support prepared by the suspension polymerization of styrene and 1,4-butanediol dimethacrylate. The copolymer was chloromethylated to 2.36 mmol Cl/g. The functionalized resin was found to possess all the physicochemical properties similar to Merrifield resin. The free peptide was obtained in high yield and purity as judged by RP-HPLC and characterized by amino acid analysis and ESI-MS.     

High-yield, solid-phase synthesis of humanin, an Alzheimer's disease associated, novel 24-mer peptide which contains a difficult sequence.

Humanin is a novel, 24-mer residue bioactive peptide, which antagonizes Alzheimer's disease (AD) related neurotoxicity and offers a hope for developing new therapeutics against AD. Access to adequate amounts of pure humanin is a prerequisite for further, thorough, investigation of the pharmacological properties and therapeutic potency of the peptide. Until now, humanin has been obtained mainly by molecular biology techniques. In this work the Fmoc solid-phase synthesis of humanin on an in-house prepared 2-Cl-tritylamidomethyl polystyrene resin is described fully. Special precautions, i.e. prolonged deprotection steps, should be taken to achieve a high overall yield, since humanin seems to contain a 'difficult sequence' (R4G5F6S7C8L9) near its highly lipophilic, biologically important region L9L10L11L12.     

An efficient gel-phase synthesis of peptides on a high capacity flexible crosslinked polystyrene support: comparison with Merrifield resin.

A highly solvating copolymer was prepared in high yield by introducing a flexible crosslinker, 1,4-butanedioldimethacrylate, into the polystyrene matrix by a free radical aqueous suspension polymerization. A 2 mol% crosslinked resin showed rigidity and mechanical characteristics comparable to those of divinylbenzene-crosslinked polystyrene (Merrifield resin, DVB-PS) support. Swelling and solvation characteristics of the new resin, BDDMA-PS, were much higher than DVB-PS support in all solvents used for solid phase peptide synthesis. The diacrylate crosslinks in the resin network were found to be highly stable even after 48 h treatment with neat TFA, 6 N HCl and 6 N KOH at 110 degrees C. To demonstrate the usefulness of the new resin in high capacity peptide synthesis, a typical difficult peptide, acyl carrier protein (ACP) fragment (65-74), was synthesized on commercially available 1 mol% crosslinked DVB-PS and 2 mol% crosslinked BDDMA-PS resins under identical conditions. A protocol using NMP/DMSO mediated coupling was employed for chain assembly. The yield and purity of the product from BDDMA-PS resin was higher than when the DVB-PS resin was used. The mechanistic reason behind the synthetic efficiency of the new resin was found to be its ability to induce random coil conformation to the growing peptide chains.