The role of bacterial cell wall hydrophobicity in adhesion.

In this study, the adhesion of bacteria differing in surface hydrophobicity was investigated. Cell wall hydrophobicity was measured as the contact angle of water on a bacterial layer collected on a microfilter. The contact angles ranged from 15 to 70 degrees. This method was compared with procedures based upon adhesion to hexadecane and with the partition of cells in a polyethylene glycol-dextran two-phase system. The results obtained with these three methods agreed reasonably well. The adhesion of 16 bacterial strains was measured on sulfated polystyrene as the solid phase. These experiments showed that hydrophobic cells adhered to a greater extent than hydrophilic cells. The extent of adhesion correlated well with the measured contact angles (linear regression coefficient, 0.8).     

Surface Hydrophobicity of Culture and Water Biofilm of <Emphasis Type="Italic">Penicillium</Emphasis> spp.

Fungal surface hydrophobicity is involved in several functions in fungal growth and development. Water contact angles measurement has been used as a direct and simple approach for its characterisation in solid cultures. Microsphere adhesion assay is said to be the best method to assess cell hydrophobicity of filamentous fungi. This study aimed to apply these two methods to study hydrophobicity of Penicillium expansum and Penicillium brevicompactum grown as mycelial mats in solid culture, liquid culture and water biofilms. As result, both species in solid cultures were classified as hydrophobic with contact angles ≥90o, but in liquid cultures and water biofilms showed different levels of hydrophobicity when microsphere adhesion assay was applied. In addition, was found that biofilms have specific hydrophobic hyphae which may be involved in fungal ecological functions.     

A novel method for identifying hydrophobicity on fungal surfaces

Fungal surface hydrophobicity has many ecological functions and water contact angles measurement is a direct and simple approach for its characterization. The objective of this study was to evaluate if in-vitro growth conditions coupled with versatile image analysis allows for more accurate fungal contact angle measurements. Fungal cultures were grown on agar slide media and contact angles were measured utilizing a modified microscope and digital camera setup. Advanced imaging software was adopted for contact angle determination. Contact angles were observed in hydrophobic, hydrophilic and a newly created chronoamphiphilic class containing fungi taxa with changing surface hydrophobicity. Previous methods are unable to detect slight changes in hydrophobicity, which provide vital information of hydrophobicity expression patterns. Our method allows for easy and efficient characterization of hydrophobicity, minimizing disturbance to cultures and quantifying subtle variation in hydrophobicity.     

Adhesion of bacillus spores in relation to hydrophobicity

The adhesion of spores of five different Bacillus species to solid surfaces of different hydrophobicity was evaluated. The spore surface hydrophobicity was measured using hydrophobic interaction chromatography (HIC). A large variation in hydrophobicity was found among the spores of the different species tested. The degree of adhesion of spores to the solid surfaces was consistent with the results obtained using the HIC method. The most hydrophobic spores, according to the HIC method, adhered in a much larger extent to the hydrophobic surfaces. Furthermore, spores generally adhered to a greater extent to hydrophobic and hydrophilic surfaces than did the vegetative cells.     

Biocides incorporated into plasticized polyvinylchloride reduce adhesion of Pseudomonas fluorescens BL146 and substratum hydrophobicity

A quantitative adhesion assay was developed to monitor attachment of Pseudomonas fluorescens BL146 to discs of plasticized polyvinylchloride (pPVC) with and without incorporated biocides. Adherent cells were quantified by radiolabelling with DL-[4,5-³H]leucine. Adhesion reached a maximum after 6 h incubation at an initial cell concentration of 5 x 10⁷ cells ml^-1. The adhesion assay was used to compare bacterial attachment to pPVC containing the biocides 10,10-oxybisphenoxyarsine (OBPA), 2- n -octyl-4-isothiazolin-3-one (OIT), 2,3,5,6-tetrachloro-4-(methylsulphonyl)pyridine (TCMP) and N -trichloromethylthiophthalimide (NCMP) at 0, 250, 750 and 2250 ppm. All four biocides reduced adhesion with increasing concentration, with statistically significant reductions in adhesion (< 53%) occurring with OBPA, OIT and TCMP at 2250 ppm. Significant reductions in adhesion to pPVC containing OBPA were found whether adhering cells were viable or non-viable. The hydrophobicity of the pPVC surfaces was quantified by the measurement of water contact angles using the Wilhelmy plate technique. A trend of reduced hydrophobicity was observed with increasing biocide concentration. Incorporation of all four biocides at 2250 ppm caused statistically significant reductions in contact angle from 104.7° to a minimum of 93.5°. Incorporation of biocides into pPVC therefore concurrently reduces both bacterial adhesion and surface hydrophobicity.     

Fimbriae mediated nonspecific adhesion of Salmonella typhimurium to mineral particles

The adhesion of cells of Salmonella typhimurium to albite, biotite, felspar, magnetite and quartz was correlated to the presence of fimbriae and degree of hydrophobicity and charge of the bacterial surface. It was found that the presence of fimbriae resulted in a higher degree of adhesion compared to adhesion of nonfimbriated cells. The significance of the physico-chemical characteristics of fimbriae was shown by a direct linearity between high hydrophobicity of fimbriated cells and degree of adhesion to the mineral particles. Fimbriated cells exhibited higher negative as well as positive surface charge as compared to nonfimbriated cells. Adhesion to several of the minerals was shown to be independent of the extent of negative charges on the bacterial surfaces. A high degree of adhesion to biotite, possibly due to a combination of characteristics of the particles, was not related to either bacterial fimbriation or a physico-chemical characteristic of the bacterial surface. The results of the nonspecific adhesion observed are discussed in terms of available binding sites and distribution of physico-chemical characteristics on the bacterial cell surface structures.     

Influence of cell surface characteristics on adhesion of <Emphasis Type="Italic">Saccharomyces cerevisiae</Emphasis> to the biomaterial hydroxylapatite

The influence of the physicochemical properties of biomaterials on microbial cell adhesion is well known, with the extent of adhesion depending on hydrophobicity, surface charge, specific functional groups and acid–base properties. Regarding yeasts, the effect of cell surfaces is often overlooked, despite the fact that generalisations may not be made between closely related strains. The current investigation compared adhesion of three industrially relevant strains of Saccharomyces cerevisiae (M-type, NCYC 1681 and ALY, strains used in production of Scotch whisky, ale and lager, respectively) to the biomaterial hydroxylapatite (HAP). Adhesion of the whisky yeast was greatest, followed by the ale strain, while adhesion of the lager strain was approximately 10-times less. According to microbial adhesion to solvents (MATS) analysis, the ale strain was hydrophobic while the whisky and lager strains were moderately hydrophilic. This contrasted with analyses of water contact angles where all strains were characterised as hydrophilic. All yeast strains were electron donating, with low electron accepting potential, as indicated by both surface energy and MATS analysis. Overall, there was a linear correlation between adhesion to HAP and the overall surface free energy of the yeasts. This is the first time that the relationship between yeast cell surface energy and adherence to a biomaterial has been described.     

Adhesion of bacillus spores in relation to hydrophobicity

R önner , U., H usmark , U. & H enriksson , A. 1990. Adhesion of bacillus spores in relation to hydrophobicity. Journal of Applied Bacteriology 69 , 550–556.
The adhesion of spores of five different Bacillus species to solid surfaces of different hydrophobicity was evaluated. The spore surface hydrophobicity was measured using hydrophobic interaction chromatography (HIC). A large variation in hydrophobicity was found among the spores of the different species tested. The degree of adhesion of spores to the solid surfaces was consistent with the results obtained using the HIC method. The most hydrophobic spores, according to the HIC method, adhered in a much larger extent to the hydrophobic surfaces. Furthermore, spores generally adhered to a greater extent to hydrophobic and hydrophilic surfaces than did the vegetative cells.     

Influence of blood proteins in the in vitro adhesion of Staphylococcus epidermidis to teflon, polycarbonate, polyethylene and bovine pericardium.

The influence of human plasma proteins (fibrinogen, albumin and fibronectin) on the adherence of Staphylococcus epidermis to teflon, polyethylene, polycarbonate and bovine pericardium was studied in an in vitro quantitative assay by scintillation counting. Bacterial adhesion was generally reduced by the presence of protein during the adherence assay except in the case of bovine pericardium, in which adherence remained almost unaffected. The effect of these plasma proteins on bacterial surface properties resulted in strong increases of surface charge as measured by ion-exchange chromatography and with no effect on hydrophobicity, estimated as contact angles. Adherence was not found to be correlated with these two properties, suggesting that bacteria-surface interactions must not be simplified to the influence of interfacial forces.     

Bacterial adhesion to hydroxyl- and methyl-terminated alkanethiol self-assembled monolayers.

The attachment of bacteria to solid surfaces is influenced by substratum chemistry, but to determine the mechanistic basis of this relationship, homogeneous, well-defined substrata are required. Self-assembled monolayers (SAMs) were constructed from alkanethiols to produce a range of substrata with different exposed functional groups, i.e., methyl and hydroxyl groups and a series of mixtures of the two. Percentages of hydroxyl groups in the SAMs and substratum wettability were measured by X-ray photoelectron spectroscopy and contact angles of water and hexadecane, respectively. SAMs exhibited various substratum compositions and wettabilities, ranging from hydrophilic, hydroxyl-terminated monolayers to hydrophobic, methyl-terminated monolayers. The kinetics of attachment of an estuarine bacterium to these surfaces in a laminar flow chamber were measured over periods of 120 min. The initial rate of net adhesion, the number of cells attached after 120 min, the percentage of attached cells that adsorbed or desorbed between successive measurements, and the residence times of attached cells were quantified by phase-contrast microscopy and digital image processing. The greatest numbers of attached cells occurred on hydrophobic surfaces, because (i) the initial rates of adhesion and the mean numbers of cells that attached after 120 min increased with the methyl content of the SAM and the contact angle of water and (ii) the percentage of cells that desorbed between successive measurements (ca. 2 min) decreased with increasing substratum hydrophobicity. With all surfaces, 60 to 80% of the cells that desorbed during the 120-min exposure period had residence times of less than 10 min, suggesting that establishment of firm adhesion occurred quickly on all of the test surfaces.     

Membrane glycoprotein and surface free energy changes in hypoxic fibroblast cells

Hypoxia affects the biochemistry of mammalian cells and thus alters their sensitivity to subsequent chemo- and radiotherapy. When V79 Chinese hamster lung fibroblasts were grown under conditions of extreme hypoxia (less than 10 ppm O2) there was a significant shift in the membrane glycoprotein composition. Scanning electron microscopy revealed altered cell surface morphology including loss of pseudopodial projections. Experiments to determine changes in interfacial free energy of these cells using equilibrium two phase systems of poly(ethylene glycol) (PEG) and dextran were carried out. Test fluid droplets of the denser dextran-rich phase were formed on layers of cells in the PEG-rich phase as the bathing medium, and the contact angles the droplets made with the cell layers were measured from photomicrographs. The contact angles on cells in the plateau phase increased significantly with time of exposure to hypoxia, from 25 degrees (zero time) to 35 degrees (6 h) to 60 degrees (9 h). Contact angles on cells in the exponential phase increased from 80 degrees (zero time) to 150 degrees after 20 h of hypoxia. It appears that the altered contact angles reflect changes in cell surface hydrophobicity that may, in part, reflect alterations in the membrane glycoprotein composition.     

Study on the Hydrophobic Property of Shark-Skin-Inspired Micro-Riblets

This paper aims to characterize the hydrophobic property of shark-skin-inspired riblets with potential engineering appli- cations. Based on the hydrophobic theory, a new hydrophobic model which is consistent with the special structure of shark-skin-inspired micro-riblets was proposed. Then, the contact angles of different droplets were measured by optical contact angle measuring device on the shark-skin-inspired micro-riblets and the smooth surface, respectively. The results show that the surface of micro-riblets possesses obvious hydrophobicity, and the actual contact angles of different droplets residing on the riblets decrease with the increase in the droplet volume. According to the new hydrophobic model and the measurement of contact angle, it was found that the arrangement and structure of the shark-skin-inspired micro-riblets significantly affect the surface hydrophobic property. Using the new hydrophobic model, the prediction error of contact angle can be less than 3% compared with the measured one. The research on hydrophobic property of biomimetic micro-riblets is proved to be necessary and important to well explain drag reduction and microbe-resistant property of micro-riblets.     

Comparison of contact angles and adhesion to hexadecane of urogenital, dairy, and poultry lactobacilli: effect of serial culture passages.

The aim of this study was to examine the hydrophobicities of 23 urogenital, dairy, poultry, and American Type Culture Collection isolates of lactobacilli and to determine the effect on hydrophobicity of serially passaging the strains in liquid medium. To this end, strains were grown after isolation and identification and then serially passaged up to 20 times. Hydrophobicity was assessed through contact angle measurements on lawns of cells by using water, formamide, methylene iodide, 1-bromonaphthalene, and hexadecane as wetting agents and through measurement of their partitioning in a hexadecane-water system. The hydrophobicities of these strains varied widely, with Lactobacillus casei strains being predominantly hydrophilic and L. acidophilus strains being mostly hydrophobic. For some isolates, serial passaging was accompanied by a clear loss of hydrophobic surface properties, whereas for other strains, cultures became heterogeneous in that some cells had already lost their hydrophobic surface properties while others were still hydrophobic. Adhesion of this collection of lactobacilli to hexadecane droplets in microbial adhesion to hexadecane (MATH) tests was driven by their aversion to water rather than by their affinity for hexadecane, as concluded from the fact that hexadecane contact angles were zero for all strains. Furthermore, adhesion of the lactobacilli to hexadecane in MATH tests occurred only when the water contact angle on the cells was above 60 degrees.     

Comparison of contact angles and adhesion to hexadecane of urogenital, dairy, and poultry lactobacilli: effect of serial culture passages.

The aim of this study was to examine the hydrophobicities of 23 urogenital, dairy, poultry, and American Type Culture Collection isolates of lactobacilli and to determine the effect on hydrophobicity of serially passaging the strains in liquid medium. To this end, strains were grown after isolation and identification and then serially passaged up to 20 times. Hydrophobicity was assessed through contact angle measurements on lawns of cells by using water, formamide, methylene iodide, 1-bromonaphthalene, and hexadecane as wetting agents and through measurement of their partitioning in a hexadecane-water system. The hydrophobicities of these strains varied widely, with Lactobacillus casei strains being predominantly hydrophilic and L. acidophilus strains being mostly hydrophobic. For some isolates, serial passaging was accompanied by a clear loss of hydrophobic surface properties, whereas for other strains, cultures became heterogeneous in that some cells had already lost their hydrophobic surface properties while others were still hydrophobic. Adhesion of this collection of lactobacilli to hexadecane droplets in microbial adhesion to hexadecane (MATH) tests was driven by their aversion to water rather than by their affinity for hexadecane, as concluded from the fact that hexadecane contact angles were zero for all strains. Furthermore, adhesion of the lactobacilli to hexadecane in MATH tests occurred only when the water contact angle on the cells was above 60 degrees.     

Effect of nutrient limitation on adhesion characteristics of Pseudomonas aeruginosa

Pseudomonas aeruginosa causes a variety of diseases in humans including lung and ocular infections. Infections of the cornea are usually associated with wearing contact lenses and can result in loss of vision. This study aimed to determine the effect of carbon or nitrogen limitation on the adhesion to contact lenses of a strain of Ps. aeruginosa isolated from contact lens-related corneal inflammation. Cells were grown in a continuous culture apparatus in varying levels of glucose or ammonia to effect nutrient limitation. Adhesion to contact lenses was measured as total counts and viable counts. The cell surface hydrophobicity and charge were measured using adhesion to surface-modified Sepharose. Changes in lipopolysaccharide were determined using 1D SDS-PAGE and changes in cell-surface proteins were measured using 2D gel electrophoresis. The more the cultures were nitrogen limited, the greater the increase in adhesion to unworn hydrogel contact lenses 0.3 x 10(3) - 2.2 x 10(3) cells/mm2 on Etafilon A lenses. Cells that were carbon limited showed a greater increase in adhesion to contact lenses when the lenses had been coated in artificial tears. It appeared that lipopolysaccharide may have been involved in the constitutive adhesion to unworn lenses that occurred during C-limitation, whereas changes in the outer membrane proteins contributed to the increased adhesion under nitrogen limitation, or the change in adhesion that occurred to carbon-limited cells using contact lenses coated in artificial tears. Nine cell-surface proteins appeared during nitrogen limitation with kDa/pI of 75/4.8, 4.9, 5.0; 62/5.6; 89/6.5; 38/6.4; 28/1.5; 18/6.4; 12/4.5. Any or all of these may have been involved in the increased adhesion and further experiments are underway to examine this possibility.     

Effect of R-plasmid RP1 on surface hydrophobicity of Proteus mirabilis

The presence of R-plasmid RP1, as well as the conditions of growth, affected the surface hydrophobicity of a clinical isolate of Proteus mirabilis. However, results depended upon the method of assessment. Stationary phase plasmid-containing cells appeared to be less hydrophobic than plasmid-free cells when hydrophobicity was measured by the contact angle method, but more hydrophobic when measured by bacterial adherence to hydrocarbons or hydrophobic interaction chromatography. Cells growing in a chemostat differed in hydrophobicity from stationary phase cells and results varied with the growth rate. Plasmid-mediated effects were greatest in iron-depleted cells, and differences between plasmid-containing and plasmid-free cells were virtually eliminated by pre-treatment with antiserum.     

Bacterial hydrophobicity, an overall parameter for the measurement of adhesion potential to soil particles

The adhesion of Salmonella typhimurium to the mineral particles quartz, albite, feldspar, and magnetite was shown to correlate with the hydrophobicity of the cell surface as measured by hydrophobic interaction chromatography. The same effects were also seen for seven other selected test strains, including Streptococcus faecalis, Streptococcus faecium, Escherichia coli, Citrobacter freundii, Shigella sonnei, and Shigella boydii. When the test strain of Salmonella typhimurium, was repeatedly cultivated in Luria broth, thus selecting for different degrees of fimbriation and roughness of the cell surface, varied cell hydrophobicity but constant negative and positive charge values were obtained. High hydrophobicity values always coincided with enhanced adhesion to the mineral particles. The negative charge of the bacterial surface as measured by electrostatic interaction chromatography appeared to play no role in the adhesion event. However, the positive charges on the cell surface contributed to the adhesion process. This was especially evident for cells exhibiting a high degree of hydrophobicity. Alteration of the pH between 4 and 9 did not significantly affect the adhesion process.     

Effects of cell surface damage on surface properties and adhesion of Pseudomonas aeruginosa

Bacterial cell surfaces play a crucial role in their adhesion to surfaces. In the present study, physico-chemical cell surface properties of Pseudomonas aeruginosa, isolated from a case of contact lens associated keratitis, are determined for mid-exponential and early stationary phase cells and for cells after exposure to a lens care solution or after mechanical damage by sonication. Exposure to a lens care solution and mechanical cell surface damage reduced the cell surface hydrophobicity and water contact angles decreased from 129 degrees to 96 degrees and 83 degrees, respectively. Zeta potentials in saline (-9 mV) were hardly affected after mechanical damage, but tri-modal zeta potential distributions, with subpopulation zeta potentials at -11, -28 and -41 mV, were observed after exposure of bacteria to a lens care solution. X-ray photoelectron spectroscopy indicated changes in the amounts of oxygen-, nitrogen- and phosphorus-rich cell surface components. Mid-exponential phase cells had more nitrogen-rich cell surface components than early stationary phase cells, but water contact angles and zeta potentials were not very different. In addition, mid-exponential phase cells adhered better than early stationary phase cells to hydrophobic and hydrophilic substrata in a parallel plate flow chamber. The capacity of P. aeruginosa to adhere was decreased after inflicting cell surface damage. Exposure to a lens care solution yielded a larger reduction in adhesion capacity than sonication, likely because sonication left most of the cells in a viable state, in contrast to exposure to a lens care solution. It is argued that for clinically relevant experiments, it may be preferable to work with surface damaged cells rather than with gently harvested organisms.     

Bacterial hydrophobicity, an overall parameter for the measurement of adhesion potential to soil particles.

The adhesion of Salmonella typhimurium to the mineral particles quartz, albite, feldspar, and magnetite was shown to correlate with the hydrophobicity of the cell surface as measured by hydrophobic interaction chromatography. The same effects were also seen for seven other selected test strains, including Streptococcus faecalis, Streptococcus faecium, Escherichia coli, Citrobacter freundii, Shigella sonnei, and Shigella boydii. When the test strain of Salmonella typhimurium, was repeatedly cultivated in Luria broth, thus selecting for different degrees of fimbriation and roughness of the cell surface, varied cell hydrophobicity but constant negative and positive charge values were obtained. High hydrophobicity values always coincided with enhanced adhesion to the mineral particles. The negative charge of the bacterial surface as measured by electrostatic interaction chromatography appeared to play no role in the adhesion event. However, the positive charges on the cell surface contributed to the adhesion process. This was especially evident for cells exhibiting a high degree of hydrophobicity. Alteration of the pH between 4 and 9 did not significantly affect the adhesion process.     

Physicochemical and structural studies onAcinetobacter calcoaceticus RAG-1 and MR-481—Two standard strains in hydrophobicity tests

Acinetobacter calcoaceticus RAG-1 and MR-481, two standard strains used in microbial adhesion to hydrocarbons (MATH), were characterized by contact angles, pH-dependent zeta potentials, elemental surface composition by X-ray photoelectron spectroscopy (XPS), and molecular composition by infrared spectroscopy (IR). Negatively stained (methylamine tungstate) and ruthenium red-stained cells were studied by transmission electron microscopy to reveal the absence or presence of surface appendages. Despite the fact thatA. calcoaceticus RAG-1 is known to be extremely hydrophobic in MATH, whereas MR-481 is a completely non-hydrophobic mutant, neither XPS nor IR indicated a significant difference in chemical composition of the cell surfaces. Contact angles with polar liquids, water and formamide, were considerably higher on RAG-1 than on MR-481, in accordance with their relative hydrophobicities as measured by MATH. However, no significant differences in contact angles were observed between the two strains with apolar liquids like diiodomethane,-bromonaphthalene, and hexadecane. Fibrous extensions on RAG-1, observed after ruthenium red staining, were absent on the non-hydrophobic mutant MR-481. Tentatively, these extensions could be held responsible for the hydrophobicity ofA. calcoaceticus RAG-1.