Automated high-performance liquid chromatographic method for the determination of a neuraminidase inhibitor (GG167) in human serum by pre-column fluorescence derivatisation using benzoin

A pre-column fluorescence derivatisation high-performance liquid chromatographic method for the analysis of a neuraminidase inhibitor, GG167, in human serum is described. GG167 was extracted from serum samples using Bond Elut SCX solid-phase extraction cartridges, followed by derivatisation with benzoin prior to reversed-phase chromatography with fluorescence detection. This method has been automated using a Zymark robot and used in the analysis of human serum samples from clinical studies. The method has been shown to be valid over a concentration range of 10–800 ng/ml using a 1-ml sample volume.     

Automated procedure for determination of barbiturates in serum using the combined system of PrepStation and gas chromatography–mass spectrometry

A system of an automatic sample preparation procedure followed by on-line injection of the sample extract into a gas chromatograph-mass spectrometer (GC–MS) was developed for the simultaneous analysis of seven barbiturates in human serum. A sample clean-up was performed by a solid-phase extraction (SPE) on a C₁₈ disposable cartridge. A SPE cartridge was preconditioned with methanol and 0.1 M phosphate buffer. After loading 1.5 ml of a diluted serum sample into the SPE cartridge, the cartridge was washed with 2.5 ml of methanol–water (1:9, v/v). Barbiturates were eluted with 1.0 ml of chloroform–isopropanol (3:1, v/v) from the cartridge. The eluate (1 μl) was injected into the GC–MS. The calibration curves, using an internal standard method, demonstrated a good linearity throughout the concentration range from 0.1 to 10 μg ml⁻¹ for all barbiturates extracted. The proposed method was applied to 27 clinical serum samples from three patients who were administrated secobarbital.     

On-line sample preparation of paraquat in human serum samples using high-performance liquid chromatography with column switching

A new ion-pair high-performance liquid chromatographic method with column-switching has been developed for the determination of paraquat in human serum samples. The diluted serum sample was injected onto a precolumn packed with LiChroprep RP-8 (25-40 μm) and polar serum components were washed out by 3% acetonitrile in 0.05 M phosphate buffer (pH 2.0) containing 5 mM sodium octanesulfonate. After valve switching to inject position, concentrated compounds were eluted in the back-flush mode and separated on an Inertsil ODS-2 column with 17% acetonitrile in 0.05 M phosphate buffer (pH 2.0) containing 10 mM sodium octanesulfonate. The total analysis time per sample was about 30 min and mean recovery was 98.5±2.8% with a linear range of 0.1–100 μg/ml. This method has been successfully applied to serum samples from incidents by paraquat poisoning.     

Liquid chromatographic–electrospray tandem mass spectrometric method for the simultaneous quantitation of the prodrug fosinopril and the active drug fosinoprilat in human serum

A sensitive, specific, accurate and reproducible LC–MS–MS method was developed and validated for the simultaneous quantitation of the prodrug fosinopril and its active drug fosinoprilat in human serum. The method employed acidification of the serum samples to minimize the hydrolysis of fosinopril to fosinoprilat prior to purification by solid-phase extraction to isolate the two analytes and the two internal standards from human serum. The extracted samples were analyzed by turbo ionspray LC–MS–MS in the positive ion mode. Chromatography was performed on a polymer-based C₁₈ column (Asahipak™ ODP PVA-C₁₈, 2×50 mm) using gradient elution with methanol and 10 mM ammonium acetate, pH 5.5. The calibration curve, 1.17 to 300 ng/ml, was fitted to a weighted (l/x) linear regression model. Serum quality control (QC) samples used to gauge the accuracy and precision of the method were prepared at concentrations of 5.00, 100, 250 and 500 ng/ml of each analyte. The inter-assay accuracies were within 6% (DEV) for both analytes. The intra- and inter-assay precisions were within 7% and 11% (RSD), respectively, for both analytes. The hydrolysis of fosinopril to fosinoprilat during sample processing was ≤6%. This degree of conversion would cause little error in the analysis of post-dose serum samples since such samples are known to contain low levels of the prodrug compared to the drug.     

Liquid chromatographic–electrospray tandem mass spectrometric determination of novel antifungal agents in plasma

A rapid, selective, sensitive and reproducible HPLC–electrospray tandem mass spectrometric method has been developed for the analysis of novel triazole antifungal agents, SYN-2869 and its derivatives (SYN-2836, SYN-2903 and SYN-2921), in rat plasma using SYN-2506 as an internal standard. Isolation of these compounds from plasma and sample desalting were performed by a simple extraction procedure involving protein precipitation, vacuum-drying and reconstitution with acetonitrile. For all the agents, linearity was observed over the range of 10–10 000 ng/ml (r≥0.996) and the limit of quantitation was 10 ng/ml using a 100-μl plasma volume. A measurement rate of 400–500 samples/day/instrument could be achieved using this method.     

Detection and structural investigation of metabolites of stanozolol in human urine by liquid chromatography tandem mass spectrometry

The applicability of LC–MS/MS in precursor ion scan mode for the detection of urinary stanozolol metabolites has been studied. The product ion at m/z 81 has been selected as specific for stanozolol metabolites without a modification in A- or N-rings and the product ions at m/z 97 and 145 for the metabolites hydroxylated in the N-ring and 4-hydroxy-stanozolol metabolites, respectively. Under these conditions, the parent drug and up to 15 metabolites were found in a positive doping test sample. The study of a sample from a chimeric uPA-SCID mouse collected after the administration of stanozolol revealed the presence of 4 additional metabolites. The information obtained from the product ion spectra was used to develop a SRM method for the detection of 19 compounds. This SRM method was applied to several doping positive samples. All the metabolites were detected in both the uPA-SCID mouse sample and positive human samples and were not detected in none of the blank samples tested; confirming the metabolic nature of all the detected compounds. In addition, the application of the SRM method to a single human excretion study revealed that one of the metabolites (4ξ,16ξ-dihydroxy-stanozolol) could be detected in negative ionization mode for a longer period than those commonly used in the screening for stanozolol misuse (3′-hydroxy-stanozolol, 16β-hydroxy-stanozolol and 4β-hydroxy-stanozolol) in doping analysis. The application of the developed approach to several positive doping samples confirmed the usefulness of this metabolite for the screening of stanozolol misuse. Finally, a tentative structure for each detected metabolite has been proposed based on the product ion spectra measured with accurate masses using UPLC–QTOF MS.     

Techniques for boron determination and their application to the analysis of plant and soil samples

This paper reviews techniques for determining B concentration and isotopic ratio and their application to soil and plant samples. Boron concentration has been determined utilising spectrophotometry, potentiometry, chromatography, flame atomic emission and absorption spectrometry, inductively coupled plasma (ICP) optical emission (OES) and mass spectrometry (MS), and neutron activation analysis using neutron radiography and prompt- activation analysis. Isotopic ratios of B have been measured by ICP–MS, thermal ionisation mass spectrometry (TIMS) and secondary ion mass spectrometry (SIMS). For isotopic measurements, TIMS and SIMS are more sensitive and provide higher degrees of accuracy and resolution than ICP–MS, however, extensive sample preparation and purification, and time-consuming measurements limit their usefulness for routine analyses.While the spectrophotometric technique using a colorimetric reaction of B with azomethine-H has been the most extensively applied B determination method for soil and plant samples, colorimetric methods, in general, suffer from numerous interferences and have poor sensitivity and precision. The prompt- method can determine B concentration in intact samples which enables this method to be especially useful for some applications in agriculture. Research involving B behaviour in plant and soil environments would benefit from this technology. In recent years, the use of ICP–OES and ICP–MS for B determination in plant and soil samples has grown tremendously. The application of ICP–OES brought a significant improvement in B analysis because of its simplicity, sensitivity and multielement detection capability. However, besides matrix interferences, the two most sensitive emission lines for B suffer strong spectral interference from Fe. The ICP–OES is not adequately sensitive for some nutritional work involving low B concentrations and B translocation studies using the isotope tracer technique.Plasma is one of the most effective analyte ionisers and MS is the most sensitive ion detector. Coupling of plasma with MS resulted in the development of plasma source MS technology (ICP–MS) which has outperformed all previous analytical methods for trace element determination. Boron determination by ICP–MS suffers no spectroscopic interferences, and is considered the most practical and convenient technique for B isotope determination. The ability of ICP–MS to measure isotopic ratios as well as B concentration enables: (1) B concentration determination by the isotope dilution method, (2) verification of B concentration by isotope fingerprinting in routine analysis and (3) determination of total B concentration as well as B isotope ratio in the same run for biological tracer studies. Therefore, ICP–MS is the method of choice among the present-day technologies for determining B concentration and a convenient method for B isotope determination. In recent years, new generations of plasma-source MS instruments have been developed using alternative plasma generation methods and high-resolution mass spectrometers. These instruments are expected to bring further improvements in accuracy, sensitivity and precision of B determination.     

Radioimmunoassay for a novel lignan-related hypocholesterolemic agent, S-8921, in human plasma after high-performance liquid chromatography purification and in human urine after immunoaffinity extraction

The novel compound methyl-1-(3,4-dimethoxyphenyl)-3-(3-ethylvaleryl)-4-hydroxy-6,7,8-trimethoxy-2-naphthoate (S-8921) has hypocholesterolemic activity in animals and is expected to exhibit a similar activity in human. Reversed-phase high-performance liquid chromatography (HPLC) separation followed by radioimmunoassay (RIA) for human plasma samples (HPLC–RIA) and immunoaffinity extraction (IAE) followed by RIA for human urine samples (IAE–RIA) were developed for investigation of S-8921 behavior in clinical studies. For the RIA, antisera from rabbit and a radioiodine-labelled S-8921 were prepared by immunizing a conjugate of S-8921 with bovine serum albumin and by the Bolton and Hunter method, respectively. HPLC–RIA using a semi-micro column was very sensitive, that is a 0.05 ng/ml limit of quantitation in human plasma, and specific for unchanged form of S-8921. IAE–RIA using a centrifugal filtration tube completely eliminated the matrix effect of human urine, and was very feasible. The limit of quantitation was 0.10 ng/ml. RIA detection following HPLC or IAE proved to be very useful for the pharmaceutical analysis of extremely low drug concentrations in body fluids.     

High-performance chromatographic assay for the sulphoxide metabolite of 2′-deoxy-3′-thiacytidine in human urine

A high-performance liquid chromatographic method is described for the determination in human urine of GI138870X, the sulphoxide metabolite of a novel dideoxynucleoside analogue, 2′-deoxy-3′-thiacytidine (lamivudine). GI138870X was extracted from human urine using Empore SDB RPS solid-phase extraction disks prior to reversed-phase chromatography with UV detection. The method has shown to be valid over the concentration range 0.5–100 μg/ml using a 0.5-ml sample volume.     

Separation of carvedilol enantiomers in very small volumes of human plasma by capillary electrophoresis with laser-induced fluorescence

A sensitive capillary electrophoretic method for the determination of carvedilol enantiomers in 100 μl of human plasma has been developed and validated. Carvedilol and the internal standard carazolol are isolated from plasma samples by liquid–liquid extraction using diethylether. A sensitive and selective detection is provided by helium–cadmium laser-induced fluorescence. The total analysis time is 17.5 min, about 30 min are needed for the sample preparation. The linearity of the assay ranges from 1.56 to 50 ng/ml per carvedilol enantiomer. The limits of quantification (LOQ) for the carvedilol enantiomers in 100 μl of human plasma are 1.56 ng/ml. The inter-day accuracy for R-carvedilol is between 95.8 and 103% (104% at LOQ) and for S-carvedilol between 97.1 and 103% (107% at LOQ); the inter-day precision values are between 3.81 and 8.64% (10.9% at LOQ) and between 5.47 and 7.86% (7.91% at LOQ) for R- and S-carvedilol, respectively. The small sample volume needed is especially advantageous for the application in clinical studies in pediatric patients. As an application of the assay concentration/time profiles of the carvedilol enantiomers in a 5-year-old patient receiving a test dose of 0.09 mg/kg carvedilol are reported.     

Matrix-assisted laser desorption/ionization mass spectrometry for quantitative determination of β-blocker drugs in one-drop of human serum sample

Matrix-assisted laser desorption/ionization mass spectrometry (MALDI-MS) has been applied for the quantitative determination of β-blocker drugs in one-drop of human serum samples using drop-to-drop solvent microextraction (DDSME) as a preconcentrating probe. The optimum experimental conditions for β-blocker drugs were investigated and 1.8 μL volume of toluene for 10 min extraction time with the 5% addition of NaCl under pH 11.0 was found to be the best conditions for the separation and preconcentration of drugs from 30 μL of serum sample from a patient with high blood pressure. The optimized methodologies for DDSME/MALDI-MS analyses exhibited a good linearity with intra- and inter day precision value of 8.5-10.5% and 9.4-12.6%, respectively. The proposed DDSME/MALDI-MS offers a very simple, rapid and low-cost technique for the determination of β-blocker drugs in one drop of serum sample. The reported method has been successfully applied for the determination of propranolol and nadolol in small volume of serum sample from patient suffering from high blood pressure. In future, this technique could be applied for pharmacokinetic and clinical studies.     

Simple and rapid assay for acetaminophen and conjugated metabolites in low-volume serum samples

The use of marker compounds for estimating drug metabolic capacity or pharmacokinetic parameters is common in the biological sciences. Often small laboratory animals are used and thus sample size is a limiting concern. In this report, we describe an assay we developed for measuring the concentration of acetaminophen and its conjugated metabolites in low-volume serum samples. Acetaminophen and metabolites were removed from 10 μl serum samples by a single-step 6% (v/v) perchloric acid deproteination using theophylline as internal standard. Samples were separated in a pH 2.2 sodium sulfate–acetonitrile mobile phase at a flow-rate of 1.5 ml/min on a 15 cm octadecylsilyl column at room temperature. Analytes were detected at a wavelength of 254 nm. The resulting chromatograms showed no interfering peaks from endogenous serum components. The concentration ranges measured were 1.56–200 μg/ml for acetaminophen and acetaminophen sulfate and 3.91–500 μg/ml for acetaminophen glucuronide. The assay was linear in the range of concentrations analyzed. The intra-day and inter-day coefficient of variation ranged from 0.4 to 8.2% and 0.2 to 12.3% for acetaminophen, 0.5 to 12.9% and 0.3 to 16.1% for acetaminophen glucuronide, and 0.4 to 8.1% and 0.2 to 14.3% for acetaminophen sulfate, respectively. Results from the experiments show that acetaminophen and its conjugated metabolites can easily and reproducibly be measured in low-volume serum samples and thus may offer an additional method to measure these compounds when the volume of biological samples may be limited.     

Simultaneous determination of enantiomers of structurally related anticholinergic analogs in human serum by liquid chromatography–electrospray ionization mass spectrometry with on-line sample cleanup

Trihexyphenidyl, biperiden and procyclidine are anticholinergic drugs produced as racemates for the treatment of Parkinson’s disease. This paper describes a simple and sensitive LC–MS method for the simultaneous determination of these compounds in human serum. An on-line sample clean-up procedure was used, where serum samples were directly injected into a “restricted-access media” pre-column. After the exclusion of the serum proteins, the drug molecules were eluted to a β-cyclodextrin analytical column for chiral separation. The quantitation was done by electrospray ionization MS using diphenidol as an internal standard. The method developed has limits of detection of 1 ng/ml, at least two-orders-of-magnitude linear dynamic ranges (r>0.999), and RSDs of less than 10%. The system can be completely automated for increased sample throughput and unattended analyses.     

Rapid quantitation of (−)-2′-deoxy-3′-thiacytidine in human serum by high-performance liquid chromatography with ultraviolet detection

A rapid, sensitive and specific high-performance liquid chromatographic (HPLC) assay was developed and validated for the measurement of (−)-2′-deoxy-3′-thiacytidine (3TC) in human serum. The method included precipitation of serum proteins by trichloroacetic acid (20%, w/v) treatment followed by centrifugation. The resulting supernatant was directly injected and 3TC was isocratically chromatographed on a reversed-phase C₁₈ column using a mixture of phosphate buffer and methanol (88.3:11.7, v/v) and monitored at 280 nm. The limit of quantitation was 20 ng/ml using 100 μl of serum. The standard curve was linear within the range of 20–10 000 ng/ml. Replicate analysis of three quality control samples (40–1500 ng/ml) led to satisfactory intra- and itner-assay precision (coefficient of variation from 3.0 to 12.9%) and accuracy (deviation from −6.3 to 9.7%). Moreover, sample treatment processes including human immunodeficiency virus (HIV) heat-inactivation, exposure at room temperature and freezing-thawing cycles did not influence the stability of the analyte. This assay was successfully applied to the determination of 3TC serum levels in HIV-infected patients. In addition, preliminary results indicated that this procedure may also be extended to the measurement of 3TC in human plasma and urine.     

Determination of captopril in plasma by high-performance liquid chromatography for pharmacokinetic studies

A high-performance liquid chromatographic method is described for the determination of free captopril in human plasma. (NAC) was used as an internal standard. Plasma samples were immediately derivatized with N-(1-pyrenyl)maleimide (NPM) and stabilized with 11 M HCl. The drug of interest was isolated using a liquid-liquid extraction with ethyl acetate and separation was obtained using a reversed-phase column under isocratic conditions with fluorescence detection. The sample volume was 150 μl plasma. The intra- and inter-day accuracy and precision, determined as relative error and coefficient of variation respectively, were lessthan 10%. The lower limit of quantitation, based on standards with acceptable coefficients of variation, was 25 ng/ml. No endogenous compounds were found to interfere. The linearity was assessed in the range of 25–600 ng/ml. This method has been demonstrated to be suitable for pharmacokinetic studies in humans.     

Analysis of lipoic acid in biological samples by gas chromatography with flame photometric detection

A selective and sensitive gas chromatographic method for the analysis of lipoic acid in biological samples has been developed. After base hydrolysis of the sample, the liberated lipoic acid was converted into its S,S-diethoxycarbonyl methyl ester derivative and measured by gas chromatography using a DB-210 capillary column and a flame photometric detector. The calibration curve was linear in the range 20–500 ng, and the detection limit was ca. 50 pg injected. The best hydrolysis conditions for the biological samples were obtained by using 2 M potassium hydroxide containing 4% bovine serum albumin at 110°C for 3 h. Using this method, lipoic acid in the hydrolysate could be selectively determined without any interference from matrix substances. Analytical results for the determination of lipoic acid in the mouse tissue and bacterial cell samples are presented.     

Simple and sensitive assay of zonisamide in human serum by high-performance liquid chromatography using a solid-phase extraction technique

A rapid and sensitive method for the assay of zonisamide in serum was developed using a solid-phase extraction technique followed by high-performance liquid chromatography. A 20-μl volume of human serum was first purified with a Bond-Elut cartridge column. Then, the methanol eluate was injected onto a reversed-phase HPLC column with a UV detector. The mobile phase was acetonitrile—methanol—distilled water (17:20:63, v/v) and the detection wavelength was 246 nm. The detection limit was 0.1 μg/ml in serum. The coefficients of variation were 4.2–5.6% and 5.1–9.1% for the within-day and between-day assays, respectively. This method can be used for clinical pharmacokinetic studies of zonisamide in serum even in infant patients with epilepsy.     

High-performance liquid chromatographic assay with electrochemical detection for azithromycin in serum and tissues

High-performance liquid chromatographic methods using reversed-phase chromatography and electrochemical detection have been developed for the quantitation of azithromycin in serum and tissues of laboratory animals and humans. Serum sample preparation involved addition of internal standard, alkalinization, and solvent extraction. Tissue sample preparation involved Polytron homogenization in acetonitrile containing internal standard, evaporation of the supernatant, alkalinization of the residue, and solvent extraction. Serum samples were chromatographed on an alkylphenyl-bonded silica column eluted with pH 6.8–7.2 mobile phase with a dual-electrode coulometric detector operated in the oxidative screen mode. Serum and tissue samples were chromatographed on a γRP-1 alumina column with pH 11 mobile phase with a glassy carbon amperometric detector. Recovery of azithromycin was 87% from serum and 85% from tissues. Linear standard curves were prepared in serum over two concentration ranges (0.01–0.20 and 0.20–2.0 μg/ml) and in tissues over several concentration ranges (0.1–2, 1–10, 10–100, and 100–1000 μg/g). In serum and tissues, intra- and inter-assay precision ranged from 1 to 8% and 4 to 11%, respectively. The tissue assay has been applied to liver, kidney, lung, spleen, muscle, fat, brain, tonsil, lymph nodes, eye, prostate and other urological tissues, and gynecological tissues.     

Rapid determination of the anti-cancer drug chlorambucil (Leukeran™) and its phenyl acetic acid mustard metabolite in human serum and plasma by automated solid-phase extraction and liquid chromatography–tandem mass spectrometry

A bioanalytical method for the determination of the anticancer drug chlorambucil (Leukeran™) and its phenyl acetic acid mustard metabolite in human serum and plasma is described. Automated solid-phase extraction of the analytes is carried out with C₁₈ sorbent packed in a 96 well format microtitre plate using a robotic sample processor. The extracts are analysed by isocratic reversed-phase liquid chromatography using pneumatically and thermally assisted electrospray ionisation (TurboIonspray) with selected reaction monitoring. The method is specific and sensitive, with a range of 4–800 ng/ml in human serum and plasma for both parent drug and metabolite (sample volume 200 μl). The method is accurate and precise with intra-assay and inter-assay precision (C.V.) of <15% and bias <15% for both analytes. The automated extraction procedure is significantly faster than manual sample pre-treatment methods, a batch of 96 samples is extracted in 50 min allowing for faster sample turnaround. The method has been used to provide pharmacokinetic support to biocomparability studies of Leukeran™ following single doses of oral tablet formulations.