3-Methylglutaconyl-CoA hydratase from Acinetobacter sp

Acinetobacter strain IVS-B aerobically grows on isovalerate as sole carbon and energy source. Isovalerate is metabolised via isovaleryl-CoA, an intermediate of the oxidative (S)-leucine degradation pathway. A 3-methylglutaconyl-CoA hydratase (EC 4.2.1.18) was purified 65-fold to apparent homogeneity from cell-free extracts of isovalerate-grown cells of Acinetobacter strain IVS-B. The enzyme was found to be a homotetramer (115.2 kDa) composed of four identical subunits of 28.8 kDa not containing any cofactors. The enzyme was shown to catalyse the hydration of (E)-glutaconyl-CoA (k _cat=18 s⁻¹, K _m=40 μM) and the dehydration of (S)-3-hydroxyglutaryl-CoA (k _cat=13 s⁻¹, K _m=52 μM), albeit with somewhat lower catalytic efficiencies as compared to the 3-methyl derivatives, 3-methylglutaconyl-CoA (k _cat=138 s⁻¹, K _m=14 μM) and (S)-3-hydroxy-3-methylglutaryl-CoA (k _cat=60 s⁻¹, K _m=36 μM). Thus, the mechanistically simple syn-addition of water to the (E)-isomer of 3-methylglutaconyl-CoA of the leucine degradative pathway leading to the common intermediate (S)-3-hydroxy-3-methylglutaryl-CoA was assigned as the major physiological role to this enzyme. The amino acid sequence of 3-methylglutaconyl-CoA hydratase from Acinetobacter sp. was found to be related to over 100 prokaryotic enoyl-CoA hydratases (up to 50% identity), possibly all being 3-methylglutaconyl-CoA hydratases.An erratum to this article can be found at     

Molecular characterization of phenylalanine ammonia lyase gene from <Emphasis Type="Italic">Cistanche deserticola</Emphasis>

We cloned the gene, CdPAL1, from Cistanche deserticola callus using RACE PCR with degenerate primers that were designed based on a multiple sequence alignment of known PAL genes from other plant species. The gene shows high homology to other known PAL genes registered in GenBank. The recombinant protein exhibited Michaelis–Menten kinetics with a K _m of 0.1013 mM, V _max of 4.858 μmol min⁻¹, K _cat of 3.36 S⁻¹, and K _cat/K _m is 33,168 M⁻¹ S⁻¹. The enzyme had an optimal pH of 8.5 and an activation energy of 38.92 kJ mol⁻¹ when l-Phenylalanine was used as a substrate; l-tyrosine cannot be used as substrate for this protein. The optimal temperature was 55°C, and the thermal stability results showed that, after a treatment at 70°C for 20 min, the protein retained 87% activity, while a treatment at 75°C for 20 min resulted in a loss of over 85% of the enzyme activity. Treatment with heavy metal ions (Hg²⁺, Pb²⁺, and Zn²⁺) showed remarkable inhibitory effects. Among the intermediates from the lignin (cinnamyl alcohol, cinnamyl aldehyde, coniferyl aldehyde, coniferyl alcohol), phenylpropanoid (cinnamic acid, coumaric acid, caffeic acid, and chlorogenic acid) and phenylethanoid (tyrosol and salidroside) biosynthetic pathways, only cinnamic acid showed strong inhibitory effects against CdPAL1 activity with a K _i of 8 μM. Competitive inhibitor AIP exhibited potent inhibition with K _i = 0.056 μM.     

Molecular and biochemical characterization of an extracellular serine-protease from <Emphasis Type="Italic">Vibrio metschnikovii</Emphasis> J1

A protease-producing bacterium was isolated from an alkaline wastewater of the soap industry and identified as Vibrio metschnikovii J1 on the basis of the 16S rRNA gene sequencing and biochemical properties. The strain was found to over-produce proteases when it was grown at 30°C in media containing casein as carbon source (14,000 U ml⁻¹). J1 enzyme, the major protease produced by V. metschnikovii J1, was purified by a three-step procedure, with a 2.1-fold increase in specific activity and 33.3% recovery. The molecular weight of the purified protease was estimated to be 30 kDa by SDS-PAGE and gel filtration. The N-terminal amino acid sequence of the first 20 amino acids of the purified J1 protease was AQQTPYGIRMVQADQLSDVY. The enzyme was highly active over a wide range of pH from 9.0 to 12.0, with an optimum at pH 11.0. The optimum temperature for the purified enzyme was 60°C. The activity of the enzyme was totally lost in the presence of PMSF, suggesting that the purified enzyme is a serine protease. The kinetic constants K _m and K _cat of the purified enzyme using N-succinyl-l-Ala-l-Ala-l-Pro-l-Phe-p-nitroanilide were 0.158 mM and 1.14 × 10⁵ min⁻¹, respectively. The catalytic efficiency (K _cat /K _m) was 7.23 × 10⁸ min⁻¹ M⁻¹. The enzyme showed extreme stability toward non-ionic surfactants and oxidizing agents. In addition, it showed high stability and compatibility with some commercial liquid and solid detergents. The aprJ1 gene, which encodes the alkaline protease from V. metschnikovii J1, was isolated, and its DNA sequence was determined. The deduced amino acid sequence of the preproenzyme differs from that of V. metschnikovii RH530 detergent-stable protease by 12 amino acids, 7 located in the propeptide and 5 in the mature enzyme.     

Characterization of a tryptophan 6-halogenase from <Emphasis Type="Italic">Streptomyces toxytricini</Emphasis>

Tryptophan (Trp) halogenases are found in various bacteria and play an important role in natural product biosynthesis. Analysis of the genome of Streptomyces toxytricini NRRL 15443 revealed an ORF, stth, encoding a putative Trp halogenase within a non-ribosomal peptide synthetase gene cluster. This gene was cloned into pET28a and functionally overexpressed in Escherichia coli. The enzyme halogenated both l- and d-Trp to yield the corresponding 6-chlorinated derivatives. The optimum activity was at 40°C and pH 6 giving k _cat /K _M value of STTH of 72,000 min⁻¹ M⁻¹. The enzyme also used bromide to yield 6-bromo-Trp.     

Heterologous expression and characterization of <Emphasis Type="Italic">Bacillus coagulans</Emphasis><Emphasis Type="SmallCaps">l</Emphasis>-arabinose isomerase

Bacillus coagulans has been of great commercial interest over the past decade owing to its strong ability of producing optical pure l-lactic acid from both hexose and pentose sugars including l-arabinose with high yield, titer and productivity under thermophilic conditions. The l-arabinose isomerase (L-AI) from Bacillus coagulans was heterologously over-expressed in Escherichia coli. The open reading frame of the L-AI has 1,422 nucleotides encoding a protein with 474 amino acid residues. The recombinant L-AI was purified to homogeneity by one-step His-tag affinity chromatography. The molecular mass of the enzyme was estimated to be 56 kDa by SDS-PAGE. The enzyme was most active at 70°C and pH 7.0. The metal ion Mn²⁺ was shown to be the best activator for enzymatic activity and thermostability. The enzyme showed higher activity at acidic pH than at alkaline pH. The kinetic studies showed that the K _m, V _max and k _cat/K _m for the conversion of l-arabinose were 106 mM, 84 U/mg and 34.5 mM⁻¹min⁻¹, respectively. The equilibrium ratio of l-arabinose to l-ribulose was 78:22 under optimal conditions. l-ribulose (97 g/L) was obtained from 500 g/l of l-arabinose catalyzed by the enzyme (8.3 U/mL) under the optimal conditions within 1.5 h, giving at a substrate conversion of 19.4% and a production rate of 65 g L⁻¹ h⁻¹.     

A cold-active and thermostable alcohol dehydrogenase of a psychrotorelant from Antarctic seawater, <Emphasis Type="Italic">Flavobacterium frigidimaris</Emphasis> KUC-1

An NAD⁺-dependent alcohol dehydrogenase of a psychrotorelant from Antarctic seawater, Flavobacterium frigidimaris KUC-1 was purified to homogeneity with an overall yield of about 20% and characterized enzymologically. The enzyme has an apparent molecular weight of 160k and consists of four identical subunits with a molecular weight of 40k. The pI value of the enzyme and its optimum pH for the oxidation reaction were determined to be 6.7 and 7.0, respectively. The enzyme contains 2 gram-atoms Zn per subunit. The enzyme exclusively requires NAD⁺ as a coenzyme and shows the pro-R stereospecificity for hydrogen transfer at the C4 position of the nicotinamide moiety of NAD⁺. F. frigidimaris KUC-1 alcohol dehydrogenase shows as high thermal stability as the enzymes from thermophilic microorganisms. The enzyme is active at 0 to over 85°C and the most active at 70°C. The half-life time and k _cat value at 60°C were calculated to be 50 min and 27,400 min⁻¹, respectively. The enzyme also shows high catalytic efficiency at low temperatures (0–20°C) (k _cat/K _m at 10°C; 12,600 mM⁻¹ min⁻¹) similar to other cold-active enzymes from psychrophiles. The alcohol dehydrogenase gene is composed of 1,035 bp and codes 344 amino acid residues with an estimated molecular weight of 36,823. The sequence identities were found with the amino acid sequences of alcohol dehydrogenases from Moraxella sp. TAE123 (67%), Pseudomonas aeruginosa (65%) and Geobacillus stearothermophilus LLD-R (56%). This is the first example of a cold-active and thermostable alcohol dehydrogenase.     

Cloning and characterization of a novel <Emphasis Type="SmallCaps">l</Emphasis>-arabinose isomerase from <Emphasis Type="Italic">Bacillus licheniformis</Emphasis>

Based on analysis of the genome sequence of Bacillus licheniformis ATCC 14580, an isomerase-encoding gene (araA) was proposed as an l-arabinose isomerase (L-AI). The identified araA gene was cloned from B. licheniformis and overexpressed in Escherichia coli. DNA sequence analysis revealed an open reading frame of 1,422 bp, capable of encoding a polypeptide of 474 amino acid residues with a calculated isoelectric point of pH 4.8 and a molecular mass of 53,500 Da. The gene was overexpressed in E. coli, and the protein was purified as an active soluble form using Ni–NTA chromatography. The molecular mass of the purified enzyme was estimated to be ~53 kDa by sodium dodecyl sulfate–polyacrylamide gel electrophoresis and 113 kDa by gel filtration chromatography, suggesting that the enzyme is a homodimer. The enzyme required a divalent metal ion, either Mn²⁺or Co²⁺, for enzymatic activity. The enzyme had an optimal pH and temperature of 7.5 and 50°C, respectively, with a k _cat of 12,455 min⁻¹ and a k _cat/K _m of 34 min⁻¹ mM⁻¹ for l-arabinose, respectively. Although L-AIs have been characterized from several other sources, B. licheniformis L-AI is distinguished from other L-AIs by its wide pH range, high substrate specificity, and catalytic efficiency for l-arabinose, making B. licheniformis L-AI the ideal choice for industrial applications, including enzymatic synthesis of l-ribulose. This work describes one of the most catalytically efficient L-AIs characterized thus far.     

A new esterase showing similarity to putative dienelactone hydrolase from a strict marine bacterium, <Emphasis Type="Italic">Vibrio</Emphasis> sp. GMD509

Vibrio sp. GMD509, a marine bacterium isolated from eggs of the sea hare, exhibited lipolytic activity on tributyrin (TBN) plate, and the gene representing lipolytic activity was cloned. As a result, an open reading frame (ORF) consisting of 1,017 bp (338 aa) was found, and the deduced amino acid sequence of the ORF showed low similarity (<20%) to α/β hydrolases such as dienelactone hydrolases and esterase/lipase with G–X₁–S–X₂–G sequence conserved. Phylogenetic analysis suggested that the protein belonged to a new family of esterase/lipase together with various hypothetical proteins. The enzyme was overexpressed in Escherichia coli and purified to homogeneity. The purified enzyme (Vlip509) showed the best hydrolyzing activity toward p-nitrophenyl butyrate (C₄) among various p-nitrophenyl esters (C₂ to C₁₈), and optimal activity of Vlip509 occurred at 30°C and pH 8.5, respectively. Kinetic parameters toward p-nitrophenyl butyrate were determined as K _m (307 μM), k _cat (5.72 s⁻¹), and k _cat/K _m (18.61 s⁻¹ mM⁻¹). Furthermore, Vlip509 preferentially hydrolyzed the S-enantiomer of racemic ofloxacin ester. Despite its sequence homology to dienelactone hydrolase, Vlip509 showed no dienelactone hydrolase activity. This study represents the identification of a novel lipolytic enzyme from marine environment.     

Recombinant DNA-methyltransferase M1.Bst19I from <Emphasis Type="Italic">Bacillus stearothermophilus</Emphasis> 19: Purification,properties, and amino acid sequence analysis

The M1.Bst19I DNA-methyltransferase gene from restriction-modification system Bst19I (recognition sequence 5′-GCATC-3′) in Bacillus stearothermophilus 19 has been cloned in the expressing vector pJW that carries a tandem of thermo inducible promoters P _R /P _L from phage λ. Highly purified enzyme has been isolated by chromatography on various resins from Escherichia coli cells where it is accumulated in a soluble form. The study of M1.Bst19I properties has revealed that the enzyme has a temperature optimum at 50°C and demonstrates maximal activity at pH 8.0. M1.Bst19I modifies adenine in sequence 5′-GCATC-3′. Kinetic parameters of M1.Bst19I DNA methylation reaction have been determined as follows: Km for λ DNA is 0.68 ± 0.07 μM, Km for S-adenosyl-L-methionine is 2.02 ± 0.31 μM. Catalytical constant (k _cat) is 1.8 ± 0.05 min⁻¹. Comparative analysis of Target Recognition Domain amino acid sequences for M1.Bst19I and other α-N6-DNA-methyltransferases has allowed us to suggest the presence of two types of the enzymes containing ATG or ATC triplets in the recognition sequence.     

Characterization of a recombinant endo-type alginate lyase (Alg7D) from <Emphasis Type="Italic">Saccharophagus degradans</Emphasis>

A gene, alg7D, from Saccharophagus degradans, coding for a putative alginate lyase belonging to the family of polysaccharide lyase-7, was overexpressed in Escherichia coli. The properties of the recombinant Alg7D were characterized. The enzyme endolytically depolymerized alginate by β-elimination into oligo-alginates with degrees of polymerization of 2–5. Its activity was maximal at 50°C and pH 7 and was slightly increased in the presence of Na⁺. The K _M , V _max , k _cat , and k _cat /K _M values were: 3 mg ml⁻¹, 6.2 U mg⁻¹, 1.9 × 10⁻² s⁻¹, and 6.3 × 10⁻³ mg⁻¹ ml s⁻¹, respectively.     

Identification and characterization of a novel nitrilase from <Emphasis Type="Italic">Pseudomonas fluorescens</Emphasis> Pf-5

Nitrile groups are catabolized to the corresponding acid and ammonia through one-step reaction involving a nitrilase. Here, we report the use of bioinformatic and biochemical tools to identify and characterize the nitrilase (NitPf5) from Pseudomonas fluorescens Pf-5. The nitPf5 gene was identified via sequence analysis of the whole genome of P. fluorescens Pf-5 and subsequently cloned and overexpressed in Escherichia coli. DNA sequence analysis revealed an open-reading frame of 921 bp, capable of encoding a polypeptide of 307 amino acids residues with a calculated isoelectric point of pH 5.4. The enzyme had an optimal pH and temperature of 7.0°C and 45°C, respectively, with a specific activity of 1.7 and 1.9 μmol min⁻¹ mg protein⁻¹ for succinonitrile and fumaronitrile, respectively. The molecular weight of the nitrilase as determined by sodium dodecyl sulfate-polyacrylamide gel electrophoresis and gel filtration chromatography was 33,000 and 138,000 Da, respectively, suggesting that the enzyme is homotetrameric. Among various nitriles, dinitriles were the preferred substrate of NitPf5 with a K _m = 17.9 mM and k _cat/K _m = 0.5 mM⁻¹ s⁻¹ for succinonitrile. Homology modeling and docking studies of dinitrile and mononitrile substrate into the active site of NitPf5 shed light on the substrate specificity of NitPf5. Although nitrilases have been characterized from several other sources, P. fluorescens Pf-5 nitrilase NitPf5 is distinguished from other nitrilases by its high specific activity toward dinitriles, which make P. fluorescens NitPf5 useful for industrial applications, including enzymatic synthesis of various cyanocarboxylic acids.     

Cloning,characterization and expression of the chitinase gene of <Emphasis Type="Italic">Enterobacter</Emphasis> sp. NRG4

A chitinase producing bacterium Enterobacter sp. NRG4, previously isolated in our laboratory, has been reported to have a wide range of applications such as anti-fungal activity, generation of fungal protoplasts and production of chitobiose and N-acetyl D-glucosamine from swollen chitin. In this paper, the gene coding for Enterobacter chitinase has been cloned and expressed in Escherichia coli BL21(DE3). The structural portion of the chitinase gene comprised of 1686 bp. The deduced amino acid sequence of chitinase has high degree of homology (99.0%) with chitinase from Serratia marcescens. The recombinant chitinase was purified to near homogeneity using His-Tag affinity chromatography. The purified recombinant chitinase had a specific activity of 2041.6 U mg⁻¹. It exhibited similar properties pH and temperature optima of 5.5 and 45°C respectively as that of native chitinase. Using swollen chitin as a substrate, the K_m, k_cat and catalytic efficiency (k_cat/K_m) values of recombinant chitinase were found to be 1.27 mg ml⁻¹, 0.69 s⁻¹ and 0.54 s⁻¹M⁻¹ respectively. Like native chitinase, the recombinant chitinase produced medicinally important N-acetyl D-glucosamine and chitobiose from swollen chitin and also inhibited the growth of many fungi.     

Purification and characterisation of lignin peroxidase from <Emphasis Type="Italic">Pycnoporus sanguineus</Emphasis> MTCC-137

Extracellular secretion of lignin peroxidase from Pycnoporus sanguineus MTCC-137 in the liquid culture growth medium amended with lignin containing natural sources has been shown. The maximum secretion of lignin peroxidase has been found in the presence of saw dust. The enzyme has been purified to homogeneity from the culture filtrate of the fungus using ultrafiltration and anion exchange chromatography on DEAE-cellulose. The purified lignin peroxidase gave a single protein band in sodium dodecylsulphate polyacrylamide gel electrophoresis corresponding to the molecular mass 40 kDa. The K _m, k _cat and k _cat/K _m values of the enzyme using veratryl alcohol and H₂O₂ as the substrate were 61 M, 2.13 s⁻¹, 3.5 × 10⁴ M⁻¹s⁻¹ and 71 M, 2.13 s⁻¹, 3.0 × 10⁴ M⁻¹ s⁻¹ respectively at the optimum pH of 2.5. The temperature optimum of the enzyme was 25°C.     

Impact of oxygen supply on rtPA expression in <Emphasis Type="Italic">Escherichia coli</Emphasis> BL21 (DE3): ammonia effects

A phytase with high activity at neutral pH and typical water temperatures (∼25°C) could effectively hydrolyze phytate in aquaculture. In this study, a phytase-producing strain, Pedobacter nyackensis MJ11 CGMCC 2503, was isolated from glacier soil, and the relevant gene, PhyP, was cloned using degenerate PCR and thermal asymmetric interlaced PCR. To our knowledge, this is the first report of detection of phytase activity and cloning of phytase gene from Pedobacter. PhyP belongs to beta-propeller phytase family and shares very low identity (∼28.5%) with Bacillus subtilis phytase. The purified recombinant enzyme (r-PhyP) from Escherichia coli displayed high specific activity for sodium phytate of 24.4 U mg⁻¹. The optimum pH was 7.0, and the optimum temperature was 45°C. The K _m, V _max, and k _cat values were 1.28 mM, 71.9 μmol min⁻¹ mg⁻¹, and 45.1 s⁻¹, respectively. Compared with Bacillus phytases, r-PhyP had higher relative activity at 25°C (r-PhyP (>50%), B. subtilis phytase (<8%)) and hydrolyzed phytate from soybean with greater efficacy at neutral pH. These characteristics suggest that r-PhyP might be a good candidate for an aquatic feed additive in the aquaculture industry.     

Cloning and characterization of a ribitol dehydrogenase from Zymomonas mobilis

Ribitol dehydrogenase (RDH) catalyzes the conversion of ribitol to d-ribulose. A novel RDH gene was cloned from Zymomonas mobilis subsp. mobilis ZM4 and overexpressed in Escherichia coli BL21(DE3). DNA sequence analysis revealed an open reading frame of 795 bp, capable of encoding a polypeptide of 266 amino acid residues with a calculated molecular mass of 28,426 Da. The gene was overexpressed in E. coli BL21(DE3) and the protein was purified as an active soluble form using glutathione S-transferase affinity chromatography. The molecular mass of the purified enzyme was estimated to be ∼28 kDa by sodium dodecyl sulfate-polyacrylamide gel and ∼58 KDa with gel filtration chromatography, suggesting that the enzyme is a homodimer. The enzyme had an optimal pH and temperature of 9.5 and 65°C, respectively. Unlike previously characterized RDHs, Z. mobilis RDH (ZmRDH) showed an unusual dual coenzyme specificity, with a k _cat of 4.83 s⁻¹ for NADH (k _cat/K _m = 27.3 s⁻¹ mM⁻¹) and k _cat of 2.79 s⁻¹ for NADPH (k _cat/K _m = 10.8 s⁻¹ mM⁻¹). Homology modeling and docking studies of NAD⁺ and NADP⁺ into the active site of ZmRDH shed light on the dual coenzyme specificity of ZmRDH.     

Hyaluronic acid production by recombinant <Emphasis Type="Italic">Lactococcus lactis</Emphasis>

A gene encoding a new xylanase, named xynZG, was cloned by the genome-walking PCR method from the nematophagous fungus Plectosphaerella cucumerina. The genomic DNA sequence of xynZG contains a 780 bp open reading frame separated by two introns with the sizes of 50 and 46 bp. To our knowledge, this would be the first functional gene cloned from P. cucumerina. The 684 bp cDNA was cloned into vector pHBM905B and transformed into Pichia pastoris GS115 to select xylanase-secreting transformants on RBB-xylan containing plate. The optimal secreting time was 3 days at 25°C and enzymatic activities in the culture supernatants reached the maximum level of 362 U ml⁻¹. The molecular mass of the enzyme was estimated to be 19 kDa on SDS-PAGE. The optimal pH and temperature of the purified enzyme is 6 and 40°C, respectively. The purified enzyme is stable at room temperature for at least 10 h. The K _m and V _max values for birchwood xylan are 2.06 mg ml⁻¹ and 0.49 mmol min⁻¹mg⁻¹, respectively. The inhibitory effects of various mental ions were investigated. It is interesting to note that Cu²⁺ ion, which strongly inhibits most other xylanases studied, reduces enzyme activity by only 40%. Furthermore, enzyme activity is unaffected by EDTA even at a concentration of 5 mM.     

Characterization of a thermostable endo-1,5-α-<Emphasis Type="SmallCaps">l</Emphasis>-arabinanase from <Emphasis Type="Italic">Caldicellulorsiruptor saccharolyticus</Emphasis>

A recombinant putative glycoside hydrolase from Caldicellulosiruptor saccharolyticus was purified with a specific activity of 12 U mg⁻¹ by heat treatment and His-Trap affinity chromatography, and identified as a single 56 kDa band upon SDS-PAGE. The native enzyme is a dimer with a molecular mass of 112 kDa as determined by gel filtration. The enzyme exhibited its highest activity when debranched arabinan (1,5-α-l-arabinan) was used as the substrate, demonstrating that the enzyme was an endo-1,5-α-l-arabinanase. The K _m, k _cat, and k _cat/K _m values were 18 mg ml⁻¹, 50 s⁻¹, and a 2.8 mg ml⁻¹ s⁻¹, respectively. Maximum enzyme activity was at pH 6.5 and 75°C. The half-lives of the enzyme at 65, 70 and 75°C were 2440, 254 and 93 h, respectively, indicating that it is the most thermostable of the known endo-1,5-α-l-arabinanases.     

Characterization of an L-arabinose isomerase from Bacillus subtilis

An isolated gene from Bacillus subtilis str. 168 encoding a putative isomerase was proposed as an L-arabinose isomerase (L-AI), cloned into Escherichia coli, and its nucleotide sequence was determined. DNA sequence analysis revealed an open reading frame of 1,491 bp, capable of encoding a polypeptide of 496 amino acid residues. The gene was overexpressed in E. coli and the protein was purified using nickel-nitrilotriacetic acid chromatography. The purified enzyme showed the highest catalytic efficiency ever reported, with a k _cat of 14,504 min⁻¹ and a k _cat/K _m of 121 min⁻¹ mM⁻¹ for L-arabinose. A homology model of B. subtilis L-AI was constructed based on the X-ray crystal structure of E. coli L-AI. Molecular dynamics simulation studies of the enzyme with the natural substrate, L-arabinose, and an analogue, D-galactose, shed light on the unique substrate specificity displayed by B. subtilis L-AI only towards L-arabinose. Although L-AIs have been characterized from several other sources, B. subtilis L-AI is distinguished from other L-AIs by its high substrate specificity and catalytic efficiency for L-arabinose.     

Characterization of an extracellular alkaline serine protease from marine <Emphasis Type="Italic">Engyodontium album</Emphasis> BTMFS10

An alkaline protease from marine Engyodontium album was characterized for its physicochemical properties towards evaluation of its suitability for potential industrial applications. Molecular mass of the enzyme by matrix-assisted laser desorption ionization-mass spectrometry (MALDI-MS) analysis was calculated as 28.6 kDa. Isoelectric focusing yielded pI of 3–4. Enzyme inhibition by phenylmethylsulfonyl fluoride (PMSF) and aprotinin confirmed the serine protease nature of the enzyme. K _m, V _max, and K _cat of the enzyme were 4.727 × 10⁻² mg/ml, 394.68 U, and 4.2175 × 10⁻² s⁻¹, respectively. Enzyme was noted to be active over a broad range of pH (6–12) and temperature (15–65°C), with maximum activity at pH 11 and 60°C. CaCl₂ (1 mM), starch (1%), and sucrose (1%) imparted thermal stability at 65°C. Hg²⁺, Cu²⁺, Fe³⁺, Zn²⁺, Cd⁺, and Al³⁺ inhibited enzyme activity, while 1 mM Co²⁺ enhanced enzyme activity. Reducing agents enhanced enzyme activity at lower concentrations. The enzyme showed considerable storage stability, and retained its activity in the presence of hydrocarbons, natural oils, surfactants, and most of the organic solvents tested. Results indicate that the marine protease holds potential for use in the detergent industry and for varied applications.     

An L-arabinose isomerase from Acidothermus cellulolytics ATCC 43068: cloning, expression, purification, and characterization

The araA gene encoding an L-arabinose isomerase (L-AI) from the acido-thermophilic bacterium Acidothermus cellulolytics ATCC 43068 was cloned and overexpressed in Escherichia coli. The open reading frame of the L-AI consisted of 1,503 nucleotides encoding 501 amino acid residues. The recombinant L-AI was purified to homogeneity by heat treatment, ion-exchange chromatography, and gel filtration. The molecular mass of the enzyme was estimated to be approximately 55 kDa by sodium dodecyl sulfate-polyacrylamide gel electrophoresis. The purified enzyme was optimally active at 75°C and pH 7.5. It required divalent metal ions, either Mn²⁺ or Co²⁺, for both enzymatic activity and thermostability improvement at higher temperatures. The enzyme showed relatively high activity and stability at acidic pH. It exhibited over 90% of its maximal activity at pH 6.0 and retained 80% of activity after 12 h incubation at pH 6.0. Catalytic property study showed that the enzyme had an interesting catalytic efficiency. Its apparent K _m, V _max, and catalytic efficiency (k _cat/K _m) for D-galactose was 28.9 mM, 4.9 U/mg, and 9.3 mM⁻¹ min⁻¹, respectively. The enzyme carried out the isomerization of D-galactose to D-tagatose with a conversion yield over 50% after 12 h under optimal conditions, suggesting its potential in D-tagatose production.