Concurrent molecular recognition of the amino acid and tRNA by a ribozyme.

We have recently reported an in vitro-evolved precursor tRNA (pre-tRNA) that is able to catalyze aminoacylation on its own 3'-hydroxyl group. This catalytic pre-tRNA is susceptible to RNase P RNA, generating the 5'-leader ribozyme and mature tRNA. The 5'-leader ribozyme is also capable of aminoacylating the tRNA in trans, thus acting as an aminoacyl-tRNA synthetase-like ribozyme (ARS-like ribozyme). Here we report its structural characterization that reveals the essential catalytic core. The ribozyme consists of three stem-loops connected by two junction regions. The chemical probing analyses show that a U-rich region (U59-U62 in J2a/3 and U67-U68 in L3) of the ribozyme is responsible for the recognition of the phenylalanine substrate. Moreover, a GGU-motif (G70-U72) of the ribozyme, adjacent to the U-rich region, forms base pairs with the tRNA 3' terminus. Our demonstration shows that simple RNA motifs can recognize both the amino acid and tRNA simultaneously, thus aminoacylating the 3' terminus of tRNA in trans.     

Optimizing the substrate specificity of a group I intron ribozyme

Group I ribozymes can repair mutant RNAs via trans-splicing. Unfortunately, substrate specificity is quite low for the trans-splicing reaction catalyzed by the group I ribozyme from Tetrahymenathermophila. We have used a systematic approach based on biochemical knowledge of the function of the Tetrahymena ribozyme to optimize its ability to discriminate against nonspecific substrates in vitro. Ribozyme derivatives that combine a mutation which indirectly slows down the rate of the chemical cleavage step by weakening guanosine binding with additional mutations that weaken substrate binding have greatly enhanced specificity with short oligonucleotide substrates and an mRNA fragment derived from the p53 gene. Moreover, compared to the wild-type ribozyme, reaction of a more specific ribozyme with targeted substrates is much less sensitive to the presence of nonspecific RNA competitors. These results demonstrate how a detailed understanding of the biochemistry of a catalytic RNA can facilitate the design of customized ribozymes with improved properties for therapeutic applications.     

Multiple substrate binding sites in the ribozyme from Bacillus subtilis RNase P.

The ribozyme from Bacillus subtilis RNase P (P RNA) recognizes an RNA structure consisting of the acceptor stem and the T stem-loop of tRNA substrates. An in vitro selection experiment was carried out to obtain potential RNA substrates that may interact with the P RNA differently from the tRNA substrate. Using a P RNA-derived ribozyme that contains most, if not all, of the structural elements thought to be involved in active site formation of P RNA, but lacks the putative binding site for the T stem-loop of tRNA, a single RNA substrate was isolated after nine rounds of selection. This RNA is a competent substrate for the ribozyme used in selection as well as for the full-length P RNA. Biochemical characterization shows that this selected substrate interacts at a different site compared with the tRNA substrate. The selection experiment also identified a self-cleaving RNA seemingly different from other known ribozymes. These results indicate that a biological ribozyme can contain different binding sites for different RNA substrates. This alternate binding site model suggests a simple mechanism for evolving existing ribozymes to recognize RNA substrates of diverse structures.     

The mechanism of group I self-splicing: an internal guide sequence can be provided in trans.

We have reconstituted a group I self-splicing reaction between two RNA molecules with different functional RNA parts: a substrate molecule containing the 5' splice site and a functional internal guide sequence (IGS), and a ribozyme molecule with core structure elements and splice sites but a mutated IGS. The 5' exon of the substrate molecule is ligated in trans to the 3' exon of the ribozyme molecule, suggesting that the deficient IGS in the ribozyme can be replaced by an externally added IGS present on the substrate molecule. This result is different from catalysis mediated by proteins where it is not possible to dissect the specificity of an enzyme from its catalytic activity.     

Twin ribozyme mediated removal of nucleotides from an internal RNA site

Over the past two decades, the structure and mechanism of catalytic RNA have been extensively studied; now ribozymes are understood well enough to turn them into useful tools. After we have demonstrated the twin ribozyme mediated insertion of additional nucleotides into a predefined position of a suitable substrate RNA, we here show that a similar type of twin ribozyme is also capable of mediating the opposite reaction: the site-specific removal of nucleotides. In particular, we have designed a twin ribozyme that supports the deletion of four uridine residues from a given RNA substrate. This reaction is a kind of RNA recombination that in the specific context of gene therapy mimics, at the level of RNA, the correction of insertion mutations. As a result of the twin ribozyme driven reaction, 17% of substrate are converted into the four nucleotides shorter product RNA.     

A Pneumocystis carinii group I intron-derived ribozyme utilizes an endogenous guanosine as the first reaction step nucleophile in the trans excision-splicing reaction

In the trans excision-splicing reaction, a Pneumocystis carinii group I intron-derived ribozyme binds an RNA substrate, excises a specific internal segment, and ligates the flanking regions back together. This reaction can occur both in vitro and in vivo. In this report, the first of the two reaction steps was analyzed to distinguish between two reaction mechanisms: ribozyme-mediated hydrolysis and nucleotide-dependent intramolecular transesterification. We found that the 3'-terminal nucleotide of the ribozyme is the first-reaction step nucleophile. In addition, the 3'-half of the RNA substrate becomes covalently attached to the 3'-terminal nucleotide of the ribozyme during the reaction, both in vitro and in vivo. Results also show that the identity of the 3'-terminal nucleotide influences the rate of the intramolecular transesterification reaction, with guanosine being more effective than adenosine. Finally, expected products of the hydrolysis mechanism do not form during the reaction. These results are consistent with only the intramolecular transesterification mechanism. Unexpectedly, we also found that ribozyme constructs become truncated in vivo, probably through intramolecular 3'-hydrolysis (self-activation), to create functional 3'-terminal nucleotides.     

Trans insertion-splicing: ribozyme-catalyzed insertion of targeted sequences into RNAs

A group I intron-derived ribozyme from Pneumocystis carinii has been previously shown to bind an exogenous RNA substrate, splice out an internal segment, and then ligate the two ends back together (the trans excision-splicing reaction). We demonstrate that this same ribozyme can perform a trans insertion-splicing (TIS) reaction, where the ribozyme binds two exogenous RNA substrates and inserts one directly into the other. Reactions were optimized for both yield and rate, with optimum reactions carried out in 10 mM MgCl(2) for 2 h. Reaction products are stable, with no visible loss at extended times. The ribozyme recognizes the two substrates primarily through base pairing and requires an omegaG on the ribozyme and an omegaG on the sequence being inserted. We give evidence that the reaction mechanism is not the reverse of the trans excision-splicing reaction, but is composed of three steps, with intermediates attached to the ribozyme. Surprisingly, the internal guide sequence of the ribozyme is utilized to sequentially bind both substrates, forming independent P1 helices. This is an indication that ribozymes with essentially the native intron sequence can catalyze reactions significantly more dynamic and complex than self-splicing. The implications of group I intron-derived ribozymes being able to catalyze this unique reaction, and via this mechanism, are discussed.     

Kinetic characterization of the first step of the ribozyme-catalyzed trans excision-splicing reaction

Group I introns catalyze the self-splicing reaction, and their derived ribozymes are frequently used as model systems for the study of RNA folding and catalysis, as well as for the development of non-native catalytic reactions. Utilizing a group I intron-derived ribozyme from Pneumocystis carinii, we previously reported a non-native reaction termed trans excision-splicing (TES). In this reaction, an internal segment of RNA is excised from an RNA substrate, resulting in the covalent reattachment of the flanking regions. TES proceeds through two consecutive phosphotransesterification reactions, which are similar to the reaction steps of self-splicing. One key difference is that TES utilizes the 3'-terminal guanosine of the ribozyme as the first-step nucleophile, whereas self-splicing utilizes an exogenous guanosine. To further aid in our understanding of ribozyme reactions, a kinetic framework for the first reaction step (substrate cleavage) was established. The results demonstrate that the substrate binds to the ribozyme at a rate expected for simple helix formation. In addition, the rate constant for the first step of the TES reaction is more than one order of magnitude lower than the analogous step in self-splicing. Results also suggest that a conformational change, likely similar to that in self-splicing, exists between the two reaction steps of TES. Finally, multiple turnover is curtailed because dissociation of the cleavage product is slower than the rate of chemistry.     

Improved polymerase ribozyme efficiency on hydrophobic assemblies

During an early step in the evolution of life, RNA served both as genome and as catalyst, according to the RNA world hypothesis. For self-replication, the RNA organisms must have contained an RNA that catalyzes RNA polymerization. As a first step toward recapitulating an RNA world in the laboratory, a polymerase ribozyme was generated previously by in vitro evolution and design. However, the efficiency of this ribozyme is about 100-fold too low for self-replication because of a low affinity of the ribozyme to its primer/template substrate. To improve the substrate interactions by colocalizing ribozyme and substrate on micelles, we attached hydrophobic anchors to both RNAs. We show here that the hydrophobic anchors led to aggregates with the expected size of the corresponding micelles. The micelle formation increased the polymerization yield of full-length products by 3- to 20-fold, depending on substrates and reaction conditions. With the best-characterized substrate, the improvement in polymerization efficiency was primarily due to reduced sequence-specific stalling on partially extended substrates. We discuss how, during the origin of life, micellar ribozyme aggregates could have acted as precursors to membrane-encapsulated life forms.     

Structure of the Tetrahymena ribozyme: base triple sandwich and metal ion at the active site

The Tetrahymena intron is an RNA catalyst, or ribozyme. As part of its self-splicing reaction, this ribozyme catalyzes phosphoryl transfer between guanosine and a substrate RNA strand. Here we report the refined crystal structure of an active Tetrahymena ribozyme in the absence of its RNA substrate at 3.8 A resolution. The 3'-terminal guanosine (omegaG), which serves as the attacking group for RNA cleavage, forms a coplanar base triple with the G264-C311 base pair, and this base triple is sandwiched by three other base triples. In addition, a metal ion is present in the active site, contacting or positioned close to the ribose of the omegaG and five phosphates. All of these phosphates have been shown to be important for catalysis. Therefore, we provide a picture of how the ribozyme active site positions both a catalytic metal ion and the nucleophilic guanosine for catalysis prior to binding its RNA substrate.     

Cleavage of oligoribonucleotides by a ribozyme derived from the hepatitis delta virus RNA sequence.

A self-cleaving RNA sequence from hepatitis delta virus was modified to produce a ribozyme capable of catalyzing the cleavage of RNA in an intermolecular (trans) reaction. The delta-derived ribozyme cleaved substrate RNA at a specific site, and the sequence specificity could be altered with mutations in the region of the ribozyme proposed to base pair with the substrate. A substrate target size of approximately 8 nucleotides in length was identified. Octanucleotides containing a single ribonucleotide immediately 5' to the cleavage site were substrates for cleavage, and cleavage activity was significantly reduced only with a guanine base at that position. A deoxyribose 5' to the cleavage site blocked the reaction. These data are consistent with a proposed secondary structure for the self-cleaving form of the hepatitis delta virus ribozyme in which a duplex forms with sequences 3' to the cleavage site, and they support a proposed mechanism in which cleavage involves attack on the phosphorus at the cleavage site by the adjacent 2'-hydroxyl group.     

In vitro selection and characterization of a novel Zn(II)-dependent phosphorothiolate thiolesterase ribozyme

Here we present the in vitro selection of a novel ribozyme specific for Zn2+-dependent catalysis on hydrolysis of a phosphorothiolate thiolester bond. The ribozyme, called the TW17 ribozyme, was evolved and selected from an artificial RNA pool covalently linked to a biotin-containing substrate through the phosphorothiolate thiolester bond. The secondary structure for the evolved ribozyme consisted of three major helices and three loops. Biochemical and chemical studies of ribozyme-catalyzed reaction products provided evidence that the ribozyme specifically catalyzes hydrolysis of the phosphorothiolate thiolester linkage. A successful ribozyme construct with active catalysis in trans further supported the determined ribozyme structure and indicated the potential of the ribozyme for multiple-substrate turnover. The ribozyme also requires Zn2+ and Mg2+ for maximal catalysis. The TW17 ribozyme, in the presence of Zn2+ and Mg2+, conferred a rate enhancement of at least 5 orders of magnitude when compared to the estimated rate of the uncatalyzed reaction. The ribozyme completely lost catalytic activity in the absence of Zn2+, like Zn2+-dependent protein hydrolases. The discovery and characterization of the TW17 ribozyme suggest additional roles for Zn2+ in ribozyme catalysts.     

Capturing hammerhead ribozyme structures in action by modulating general base catalysis

We have obtained precatalytic (enzyme–substrate complex) and postcatalytic (enzyme–product complex) crystal structures of an active full-length hammerhead RNA that cleaves in the crystal. Using the natural satellite tobacco ringspot virus hammerhead RNA sequence, the self-cleavage reaction was modulated by substituting the general base of the ribozyme, G12, with A12, a purine variant with a much lower pK_a that does not significantly perturb the ribozyme's atomic structure. The active, but slowly cleaving, ribozyme thus permitted isolation of enzyme–substrate and enzyme–product complexes without modifying the nucleophile or leaving group of the cleavage reaction, nor any other aspect of the substrate. The predissociation enzyme-product complex structure reveals RNA and metal ion interactions potentially relevant to transition-state stabilization that are absent in precatalytic structures.     

Characterization of deoxy- and ribo-containing oligonucleotide substrates in the hammerhead self-cleavage reaction

Deoxynucleotides were introduced into a substrate fragment of the hammerhead RNA self-cleaving domain. A substrate lacking the 2' hydroxyl adjacent to the cleavage site showed no detectable cleavage under a variety of reaction conditions. Competition experiments indicate that this fragment binds to the ribozyme with an affinity similar to the all RNA fragment, suggesting that the attacking 2' hydroxyl does not substantially contribute to the binding of substrate to ribozyme. Similar competition experiments with the all DNA substrate indicate a much lower affinity for the ribozyme perhaps due to the lack of other 2' hydroxyls. A substrate containing all deoxy residues except for a ribonucleotide at the cleavage site was also shown to be active.     

Ribozymes correctly cleave a model substrate and endogenous RNA in vivo

The alpha-sarcin domain of 28 S RNA in Xenopus oocytes is attacked by several catalytic toxins (e.g. alpha-sarcin and ricin) that abolish protein synthesis. We synthesized 6 ribozymes targeted to the alpha-sarcin domain and to an oligoribonucleotide (34-mer) that mimics this domain. Sarcin ribozyme 5 (SR5) efficiently cleaved after the CUC site in the synthetic 34-mer in vitro at 50 degrees C. SR5 also cut the same site when both substrate and ribozyme were coinjected or injected separately into oocytes at 18 degrees C. Correct cleavage in vivo was shown by isolating and sequencing the large cleavage fragment. The cleavage reaction appeared to function equally well in the oocyte nucleus and cytoplasm. SR5 also correctly cleaved endogenous 28 S RNA in oocytes, although cutting was much less efficient than with alpha-sarcin. We therefore demonstrated that a ribozyme specifically cuts both a model substrate and a cellular RNA in vivo. Earlier work showed that certain injected deoxyoligonucleotides complementary to the alpha-sarcin region abolish protein synthesis. Oocyte protein synthesis was also abolished by an SR5 containing a single G----U substitution that inactivates RNA catalysis, indicating that SR5's translational suppression was perhaps due to antisense function rather than ribozyme cleavage.     

Ribozyme mediated trans insertion-splicing of modified oligonucleotides into RNA

The trans insertion-splicing reaction, catalyzed by a group I intron-derived from Pneumocystis carinii, was recently developed for the site-specific insertion of a segment of RNA into a separate RNA substrate. The molecular determinants of this reaction for binding and catalysis are reasonably well understood, making them easily and highly modifiable for altering substrate specificity. To demonstrate proof-of-concept, we now report that the P. carinii ribozyme can except modified oligonucleotides as substrates for catalyzing the trans insertion-splicing reaction. Oligonucleotides that contain one or more sugar modifications (deoxy or methoxy substitution), a backbone modification (phosphorothioate substitution), or a base modification (2-aminopurine or 4-thiouridine) are effective substrates in this reaction. Apparently, trans insertion-splicing is a unique and viable reaction for the site-specific incorporation of modified oligonucleotides into RNAs. This is the first report of a group I intron-derived ribozyme being capable of catalyzing the insertion of a modified oligonucleotide into RNA.     

Rapid kinetic characterization of hammerhead ribozymes by real-time monitoring of fluorescence resonance energy transfer (FRET)

In established methods for analyzing ribozyme kinetics, radiolabeled RNA substrates are primarily used. Each data point requires the cumbersome sampling, gel electrophoretic separation, and quantitation of reaction products, apart from the continuous loss of substrate by radioactive decay. We have used stable, double fluorescent end-labeled RNA substrates. Fluorescence of one fluorophore is quenched by intramolecular energy transfer (FRET). Upon substrate cleavage, both dyes become separated in two RNA products and fluorescence is restored. This can be followed in real time and ribozyme reactions can be analyzed under multiple (substrate excess) and under single (ribozyme excess) turnover conditions. A detailed comparison of unlabeled, single, and double fluorescent-labeled RNAs revealed moderate kinetic differences. Results with two systems, hammerhead ribozymes in I/II (small ribozyme, large substrate) and in I/III format (large ribozyme, small substrate), are reported.     

The hairpin ribozyme

The hairpin ribozyme is a member of a family of small RNA endonucleases, which includes hammer-head, human hepatitis delta virus, Neurospora VS, and the lead-dependent catalytic RNAs. All these catalytic RNAs reversibly cleave the phosphodiester bond of substrate RNA to generate 5'-hydroxyl and 2',3'-cyclic phosphate termini. Whereas the reaction products from family members are similar, large structural and mechanistic differences exist. Structurally the hairpin ribozyme has two principal domains that interact to facilitate catalysis. The hairpin ribozyme uses a catalytic mechanism that does not require metals for cleavage or ligation of substrate RNA. In this regard it is presently unique among RNA catalysts. Targeting rules for cleavage of substrate have been determined and required bases for catalysis have been identified. The hairpin ribozyme has been developed and used for gene therapy and was the first ribozyme to be approved for human clinical trials.