Fimbriation genes of Salmonella enteritidis.

From a cosmid clone, a 5.3-kilobase (kb) HindIII fragment of Salmonella enteritidis DNA containing the fimA gene was subcloned into bacteriophage T7 promoter vectors in both orientations. Predominantly mature fimbrin (14,000 Mr) was produced by clones containing the 5.3-kb insert, whereas the original cosmid clone predominantly accumulated a prefimbrin precursor (16,500 Mr). T7 RNA polymerase-dependent expression of the 5.3-kb insert and of a series of nested deletions revealed several membrane-localized polypeptides (80,000, 40,000, 29,000, 25,000, and 16,500 Mrs) transcribed in the same direction as fimA as well as a single polypeptide (9,000 Mr) transcribed in the opposite direction. Mini-Mu and TnphoA (Tn5 IS50L::phoA) transposon mutagenesis was used to identify a 2- to 3.5-kb region downstream of fimA that affected fimbrin production and processing. A more distant region (greater than 7 kb), revealed by Tn10 and Mu dI mutagenesis, was also required for fimbriation but did not hybridize with the 5.3-kb fragment. Yet another distant region did hybridize to the 5.3-kb fragment, suggesting the existence of other fimbriation-related genes.     

Type 1 fimbriae of Salmonella enteritidis.

Salmonella enteritidis was previously shown to produce fimbriae composed of 14,000-molecular-weight (Mr) fimbrin monomers (J. Feutrier, W. W. Kay, and T. J. Trust, J. Bacteriol. 168:221-227, 1986). Another distinct fimbrial structure, comprising 21,000-Mr fimbrin monomers, has now been identified. These fimbriae are simply designated as SEF 14 and SEF 21, respectively (for S. enteritidis fimbriae and the Mr [in thousands] of the fimbrin monomer). A simple method for the purification of both structures was developed by using the different biochemical properties of these fimbriae. SEF 21 remained intact after being boiled in sodium dodecyl sulfate but readily dissociated into subunits of 21,000 Mr at pH 2.2. The overall amino acid composition and the N-terminal amino acid sequence of the SEF 21 fimbrin were distinct from those of SEF 14 but were virtually identical to the predicted sequence for type 1 fimbrin of Salmonella typhimurium. Immunoelectron microscopy of S. enteritidis clearly revealed fimbrial structures that reacted with immune serum specific to the 21,000-Mr fimbrin. Immune sera raised against this subunit were cross-reactive with type 1 fimbrins found in whole-cell lysates of S. typhimurium, Salmonella illinois, and Salmonella cubana. However, there was no cross-reaction with Escherichia coli type 1 fimbriae or with other fimbrins produced by S. enteritidis. Under certain growth conditions, S. enteritidis produced both SEF 14 and SEF 21. However, when S. enteritidis was grown at 30 degrees C or lower, only the 21,000-Mr SEF 21 fimbrin could be detected. There was a direct correlation between mannose-sensitive hemagglutination and the presence of SEF 21.     

Cloning and expression in Escherichia coli of the gene encoding the structural subunit of Bacteroides nodosus fimbriae.

Bacteroides nodosus is the primary causative agent of ovine foot rot. Virulent isolates of this bacterium contain fimbriae which appear to play a major role in both infectivity and protective immunity. This paper presents the cloning and expression in Escherichia coli of the gene encoding the structural subunit of the fimbriae of B. nodosus. Total DNA was isolated from B. nodosus VCS 1001 (serogroup A), digested with HindIII, and inserted into the positive-selection vector pTR262. Recombinant E. coli clones were screened directly with anti-fimbrial antiserum by using a colony immunoassay. Several positive colonies were identified, each of which contained the same 5.5-kilobase HindIII insert. The prototype has been designated pBA101. Some clones also contained additional flanking sequences from the B. nodosus genome. Western transfer analyses verified that the positive clones were producing the B. nodosus fimbrial structural subunit, molecular weight ca. 17,500. The level of expression of the antigen in E. coli was comparable to that in B. nodosus itself and was unaffected by the insertion site or orientation of the cloned fragment, indicating that synthesis was being directed from an internal promoter. Restriction mapping and deletion analyses localized the fimbrial subunit gene to the vicinity of a PvuII site near the central region of the original HindIII insert. The expressed antigen was located in the membrane-cell wall fraction and may be exposed on the surface of the recombinant E. coli cells.     

Purification and characterization of fimbriae from Salmonella enteritidis.

A human isolate of Salmonella enteritidis which displayed strong pellicle formation during static broth culture and mannose-sensitive hemagglutination produced fimbriae which were morphologically indistinguishable from type 1 fimbriae of members of the family Enterobacteriaceae. Fimbrin was purified to homogeneity, and the apparent molecular weight (Mr, 14,400) was markedly lower than that reported for the type 1 fimbrin of Salmonella typhimurium (Mr, 22,100). This fimbrin contained 40% hydrophobic amino acids and lacked cysteine. The sequence of the N-terminal 64 amino acids was determined, and sequence alignment revealed that although the 18 N-terminal residues of the S. enteritidis molecule shared considerable homology with Escherichia coli and S. typhimurium type 1 fimbrins, the S. enteritidis fimbrin lacked a 6- to 9-residue terminal sequence present in the other type 1 fimbrins and, after residue 18, shared little homology with the E. coli sequence. Antibodies raised to the purified S. enteritidis fimbrin bound to surface-exposed conformational epitopes on the native fimbriae and displayed pronounced serospecificity. These antibodies were used in the isolation of a nonfimbriated Tn10 insertion mutant which was unable to hemagglutinate.     

Cloning and expression of the pilin gene of Pseudomonas aeruginosa PAK in Escherichia coli.

Many strains of Pseudomonas aeruginosa possess pili which have been implicated in the pathogenesis of the organism. This report presents the cloning and expression in Escherichia coli of the gene encoding the structural subunit of the pili of P. aeruginosa PAK. Total DNA from this strain was partially digested with Sau3A and inserted into the cloning vector pUC18. Recombinant E. coli clones were screened with oligonucleotide probes prepared from the constant region of the previously published amino acid sequence of the mature pilin subunit. Several positive clones were identified, and restriction maps were generated. Each clone contained an identical 1.1-kilobase HindIII fragment which hybridized to the oligonucleotide probes. Western blot analysis showed that all of the clones expressed small amounts of the P. aeruginosa pilin subunit, which has a molecular mass of ca. 18,000. This expression occurred independently of the orientation of the inserted DNA fragments in the cloning vector, indicating that synthesis was directed from an internal promoter. However, subclones containing the 1.1-kilobase HindIII fragment in a specific orientation produced an order of magnitude more of the pilin subunit. While the expressed pilin antigen was located in both the cytoplasmic and outer membrane fractions of E. coli, none appeared to be polymerized into a pilus structure.     

Cloning and expression of the exfoliative toxin B gene from Staphylococcus aureus.

Exfoliative toxin type B is produced by bacteriophage group II strains of Staphylococcus aureus and is a causative agent of staphylococcal scalded-skin syndrome. In addition to exfoliative toxin B, most isolates also produce a bacteriocin and are immune to the action of the bacteriocin. These phenotypes, as well as resistance to cadmium, were lost after elimination of a 37.5-kilobase plasmid, pRW001, from S. aureus UT0007. Transduction and transformation showed that pRW001 carries the structural genes for four phenotypic characteristics of S. aureus UT0007: (i) exfoliative toxin B production, (ii) bacteriocin production, (iii) bacteriocin immunity, and (iv) resistance to Cd(NO3)2. The exfoliative toxin B structural gene (etb), which is located on a 1.7-kilobase HindIII fragment of pRW001, was cloned in the plasmid pDH5060 and transformed into phage group III S. aureus RN4220. Transformant clones produced extracellular exfoliative toxin B that was biologically active in the neonatal mouse assay. In the Escherichia coli genetic background, the exfoliative toxin B gene was expressed only after being cloned into the positive selection-expression vector pSCC31. The structural gene for cadmium resistance was also isolated on an HindIII fragment of pRW001 cloned in pDH5060. The loci for the exfoliative toxin B gene and the cadmium resistance gene(s) were identified on a restriction map of plasmid pRW001.     

Demonstration of a plasmid-borne gene encoding a thermostable direct hemolysin in Vibrio cholerae non-O1 strains.

Of 15 Vibrio cholerae non-O1 strains, 2 produced a hemolysin termed NAG-rTDH, which is very similar to the thermostable direct hemolysin of V. parahaemolyticus. These two strains contained DNA sequences which are homologous to a DNA probe for the V. parahaemolyticus thermostable direct hemolysin gene. A probe-positive 9-kilobase HindIII fragment was cloned from a plasmid of a V. cholerae non-O1 strain into plasmid pBR322, and the resulting Escherichia coli clones produced intracellular NAG-rTDH.     

Demonstration of a plasmid-borne gene encoding a thermostable direct hemolysin in Vibrio cholerae non-O1 strains

Of 15 Vibrio cholerae non-O1 strains, 2 produced a hemolysin termed NAG-rTDH, which is very similar to the thermostable direct hemolysin of V. parahaemolyticus. These two strains contained DNA sequences which are homologous to a DNA probe for the V. parahaemolyticus thermostable direct hemolysin gene. A probe-positive 9-kilobase HindIII fragment was cloned from a plasmid of a V. cholerae non-O1 strain into plasmid pBR322, and the resulting Escherichia coli clones produced intracellular NAG-rTDH.     

Cloning and sequence of the gene encoding the major structural component of mannose-resistant fimbriae of Serratia marcescens.

Serratia marcescens US46, a human urinary tract isolate, exhibits mannose-resistant hemagglutination and agglutinates yeast cells, thereby indicating that it has two types of adhesins. We constructed a cosmid library for the DNA of this organism and isolated DNA clones carrying genes for mannose-sensitive (MS) and mannose-resistant (MR) fimbriae. On introduction of the cloned genes into Escherichia coli K-12, MS and MR fimbriae were formed. These fimbriae were functionally and morphologically indistinguishable from those of S. marcescens. Subcloning of these gene clusters revealed that the genes encoding MS fimbriae reside on a 9-kilobase (kb) DNA fragment, while those encoding MR fimbriae are present on a 12-kb fragment. Transposon insertion and maxicell analyses revealed that formation of MR fimbriae is controlled by several genes which reside on the 9-kb fragment. The nucleotide sequence of smfA, the gene encoding the major structural component of MR fimbriae, revealed that this gene encodes a 174-amino-acid polypeptide with a typical procaryotic signal peptide. The primary structure of the smfA product showed significant homology with the primary structure of the E. coli fimbrial subunit.     

Purification and characterization of thin, aggregative fimbriae from Salmonella enteritidis.

Novel fimbriae were isolated and purified from the human enteropathogen Salmonella enteritidis 27655. These fimbriae were thin (measuring 3 to 4 nm in diameter), were extremely aggregative, and remained cell associated despite attempts to separate them from blended cells by centrifugation. The thin fimbriae were not solubilized in 5 M NaOH or in boiling 0.5% deoxycholate, 8 M urea, or 1 to 2% sodium dodecyl sulfate (SDS) with or without 5% beta-mercaptoethanol. Therefore, an unconventional purification procedure based on the removal of contaminating cell macromolecules in sonicated cell extracts by enzymatic digestion and preparative SDS-polyacrylamide gel electrophoresis (PAGE) was used. The insoluble fimbriae recovered from the well of the gel required depolymerization in formic acid prior to analysis by SDS-PAGE. Acid depolymerization revealed that the fimbriae were composed of fimbrin subunits, each with an apparent molecular mass of 17 kDa. Although their biochemical characteristics and amino acid composition were typical of fimbriae in general, these thin fimbriae were clearly distinct from other previously characterized fimbriae. Moreover, their fimbrin subunits had a unique N-terminal amino acid sequence. Native fimbriae on whole cells were specifically labeled with immune serum raised to the purified fimbriae. This immune serum also reacted with the denatured 17-kDa fimbrin protein in Western blots. The polyclonal immune serum did not cross-react with the other two native fimbrial types produced by this strain or with their respective fimbrins on Western blots (immunoblots). Therefore, these fimbriae represent the third fimbrial type produced by the enteropathogen S. enteritidis.     

Thin, aggregative fimbriae mediate binding of Salmonella enteritidis to fibronectin.

The binding of human fibronectin and Congo red by an autoaggregative Salmonella enteritidis strain was found to be dependent on its ability to produce thin, aggregative fimbriae, named SEF 17 (for Salmonella enteritidis fimbriae with an apparent fimbrin molecular mass of 17 kDa). Two other fimbrial types produced by S. enteritidis, SEF 14 and SEF 21, were not responsible for the aggregative phenotype or for fibronectin binding. SEF 17-negative TnphoA mutants which retained the ability to produce SEF 14 and SEF 21 were unable to bind human fibronectin or Congo red and lost the ability to autoaggregate. Only purified SEF 17 but not purified SEF 14 or SEF 21 bound fibronectin in a solid-phase binding assay. Furthermore, only SEF 17 was able to inhibit fibronectin binding to S. enteritidis whole cells in a direct competition enzyme-linked immunosorbent assay. These results indicate that SEF 17 are the fimbriae responsible for binding fibronectin by this enteropathogen.     

Highly mobile DNA segment of IncI alpha plasmid R64: a clustered inversion region.

When R64 DNA was digested with EcoRI, two DNA fragments not equimolar to the plasmid DNA were produced. A DNA region including these fragments was cloned (pKK009), and the pKK009 DNA sample was found to be a mixture of six or more DNA species with EcoRI, PstI, and AvaI cleavage sites at different positions, suggesting a complex rearrangement of DNA. When a part of the pKK009 DNA was removed by HindIII digestion, 33 different types of plasmids (pKK010-series plasmids) were obtained out of 58 clones tested, but no DNA rearrangement could be observed. On the basis of a comparison of the detailed restriction maps of these pKK010-series plasmids, we propose a model in which four DNA segments invert independently or in groups within the 1.95-kilobase region of R64, so that the arrangements of these four segments change randomly. The fixed pKK010-series plasmid DNA was again rearranged in the presence of R64, indicating that trans-acting gene function may be present to mediate the DNA rearrangement. The gene (tentatively designated as rci) was located on a 4.5-kilobase E9' fragment of R64.     

Expression and inducibility in Staphylococcus aureus of the mecA gene, which encodes a methicillin-resistant S. aureus-specific penicillin-binding protein.

A beta-lactam-sensitive strain of Staphylococcus aureus could be converted to methicillin resistance by the introduction of a plasmid carrying the 4.3-kilobase HindIII chromosomal DNA fragment which encoded the mecA gene from a methicillin-resistant S. aureus. Transformant cells produced methicillin-resistant S. aureus-specific penicillin-binding protein constitutively, and additional insertion of an inducible penicillinase plasmid caused production of the pencillin-binding protein to become inducible.     

Complete amino acid sequence of the human alpha 5 (IV) collagen chain and identification of a single-base mutation in exon 23 converting glycine 521 in the collagenous domain to cysteine in an Alport syndrome patient.

We have generated and characterized cDNA clones providing the complete amino acid sequence of the human type IV collagen chain whose gene has been shown to be mutated in X chromosome-linked Alport syndrome. The entire translation product has 1,685 amino acid residues. There is a 26-residue signal peptide, a 1,430-residue collagenous domain starting with a 14-residue noncollagenous sequence, and a Gly-Xaa-Yaa-repeat sequence interrupted at 22 locations, and a 229-residue carboxyl-terminal noncollagenous domain. The calculated molecular weight of the mature alpha 5(IV) chain is 158,303. Analysis of genomic DNA from members of a kindred with Alport syndrome revealed a new HindIII cleavage site within the coding sequence of one of the cDNA clones characterized. The proband had a new 1.25-kilobase HindIII fragment and a lack of a 1.35-kilobase fragment, and his mildly affected female cousin had both alleles. The mutation which was located to exon 23 was sequenced from a polymerase chain reaction-amplified product, and shown to be a G----T change in the coding strand. The mutation changed the GGT codon of glycine 521 to cysteine. The same mutation was found in one allele of the female cousin. The results were confirmed by allele-specific hybridization analyses.     

Identification of contemporary plasmid virulence genes in ancestral isolates of Salmonella enteritidis and Salmonella typhimurium

Six epidemiologically distinct ancestral strains of Salmonella enteritidis and 5 of S. typhimurium from the pre-antibiotic era were examined for plasmid content, and for presence of plasmid genes implicated in mouse-virulence. Five sizes of plasmid were detected in S. enteritidis varying from 1 to 60 MDa. Two sizes of plasmid were found in S. typhimurium, 28 and 60 MDa. Plasmids of the same size were not common to both serovars. The HindIII restriction patterns of 3 of the ancestral S. enteritidis plasmids were identical to the modern 38 MDa plasmid, while all contained identical bands of 3.5, 2.7 and 1.9 kb. All the 60-MDa S. typhimurium plasmids, ancestral and contemporary, had an identical restriction pattern. Three different sized S. enteritidis plasmids and one size S. typhimurium plasmid contained a 3.5-kb DNA fragment carrying the virulence locus VirA. The VirB virulence locus was located on a 2.7-kb DNA fragment in S. enteritidis and on a 2.5-kb fragment in S. typhimurium. Both loci were precisely conserved between the ancestral strains and the modern representatives of both serovars.     

Molecular cloning of a human gene that regulates chromosome condensation and is essential for cell proliferation.

The tsBN2 cell line, a temperature-sensitive (ts) mutant of baby hamster kidney cell line BHK21/13, seems to possess a mutation in the gene that controls initiation of chromosome condensation. At the nonpermissive temperature (39.5 degrees C), the chromatin of tsBN2 cells is prematurely condensed, and the cells die. Using tsBN2 cells as a recipient of DNA-mediated gene transfer, we investigated a human gene that is responsible for regulation of chromosome condensation and cell proliferation. We found that the human gene complementing the tsBN2 mutation resides in the area of the 40- to 50-kilobase HindIII fragment, derived from HeLa cells. Based on this finding, we initiated cloning of a human gene complementing the tsBN2 mutation. From lambda and cosmid libraries carrying partial digests of DNA from the secondary transformants, the 41.8-kilobase HindIII fragment containing the human DNA was isolated. The cloned human DNA was conserved in ts+ transformants through primary and secondary transfections. Two cosmid clones convert the ts- phenotype of tsBN2 cells to ts+ with more than 100 times a higher efficiency, compared with cases of transfection with total human DNA. Thus, the cloned DNA fragments contain an active human gene that complements the tsBN2 mutation.     

Essential structure in the cloned transforming DNA that induces gene amplification of the Bacillus subtilis amyE-tmrB region.

Bacillus subtilis B7, a mutant which acquired gene amplification of the amyE-tmrB region, showed, as a result, hyperproductivity (about a 5- to 10-fold increase) of alpha-amylase and tunicamycin resistance. The mutational character was transferred to recipient cells by competence transformation. A 14-kilobase (kb) EcoRI chromosomal DNA fragment of strain B7 was found to have the transforming activity. We cloned a 6.4-kb EcoRI fragment on a phage vector lambda Charon 4A through a spontaneous deletion of 7.6 kb from the 14-kb fragment and subcloned a 1.6-kb HindIII fragment on pGR71. The cloned 6.4-kb EcoRI and 1.6-kb HindIII fragments retained the transforming activity of inducing gene amplification of the amyE-tmrB region. At the junction point (J) of the repeating units (16 kb), the tmrB gene was linked to a DNA region (M) located 4 kb upstream of amyE. The essential structure of the cloned, transforming (gene amplification-inducing) DNA was deduced to be that around J. The subcloned 1.6-kb HindIII fragment that retained the transforming activity was shown to be almost solely composed of the tmrB-J-M region. In addition, the DNA sequence around J was determined.