Thermally sensitive micelles self-assembled from poly(N-isopropylacrylamide-co-N,N-dimethylacrylamide)-b-poly(D,L-lactide-co-glycolide) for controlled delivery of paclitaxel

Thermally sensitive micelles self-assembled from poly(N-isopropylacrylamide-co- N,N-dimethylacrylamide)-b-poly(d,l-lactide-co-glycolide)[P(NIPAAm-co-DMAAm)-b-PLGA] are fabricated and used as a carrier for the controlled delivery of paclitaxel. Paclitaxel is efficiently loaded into the micelles by a membrane dialysis method. The lower critical solution temperature (LCST) of the micelles is 39.0 degrees C in PBS. Encapsulation efficiency and loading level of paclitaxel are affected by the initial loading level of paclitaxel, fabrication temperature and polymer composition. The blank and paclitaxel-loaded micelles are characterized by particle size analysis (DLS), morphology (TEM and AFM) and paclitaxel distribution (NMR, DSC and WAXRD). The micelles are spherical in shape, having an average size less than 130 nm. Paclitaxel is molecularly distributed within the core of micelles. Sustained release of paclitaxel is achieved, which is much faster at a temperature above the LCST than at the normal body temperature (37 degrees C). Cytotoxicity of free paclitaxel and paclitaxel-loaded micelles against a human breast carcinoma cell line (MDA-MB-435S) is studied at different temperatures. The cytotoxicity of the paclitaxol-loaded micelles is greater as compared to free paclitaxel. Enhanced cytotoxicity is achieved by the paclitaxol-loaded micelles when the environmental temperature increases slightly above the LCST. Paclitaxel-loaded P(NIPAAm-co-DMAAm)-b-PLGA micelles may provide a good formulation for cancer therapy.     

Oral delivery of peptide drugs using nanoparticles self-assembled by poly(gamma-glutamic acid) and a chitosan derivative functionalized by trimethylation

In the study, chitosan (CS) was conjugated with trimethyl groups for the synthesis of N-trimethyl chitosan (TMC) polymers with different degrees of quaternization. Nanoparticles (NPs) self-assembled by the synthesized TMC and poly(gamma-glutamic acid) (gamma-PGA, TMC/gamma-PGA NPs) were prepared for oral delivery of insulin. The loading efficiency and loading content of insulin in TMC/gamma-PGA NPs were 73.8 +/- 2.9% and 23.5 +/- 2.1%, respectively. TMC/gamma-PGA NPs had superior stability in a broader pH range to CS/gamma-PGA NPs; the in vitro release profiles of insulin from both test NPs were significantly affected by their stability at distinct pH environments. At pH 7.0, CS/gamma-PGA NPs became disintegrated, resulting in a rapid release of insulin, which failed to provide an adequate retention of loaded insulin, while the cumulative amount of insulin released from TMC/gamma-PGA NPs was significantly reduced. At pH 7.4, TMC/gamma-PGA NPs were significantly swelled and a sustained release profile of insulin was observed. Confocal microscopy confirmed that TMC40/gamma-PGA NPs opened the tight junctions of Caco-2 cells to allow the transport of insulin along the paracellular pathway. Transepithelial-electrical-resistance measurements and transport studies implied that CS/gamma-PGA NPs can be effective as an insulin carrier only in a limited area of the intestinal lumen where the pH values are close to the p K a of CS. In contrast, TMC40/gamma-PGA NPs may be a suitable carrier for transmucosal delivery of insulin within the entire intestinal tract.     

Synthesis and conformational study of poly(N -benzyl-L-lysine) and its benzyloxycarbonyl derivative

The solvent-and pH-induced conformational changes are examined in order to investigate the influence of benzyl group. Polymer was prepared via N^?-benzyloxycarbonyl, N^?-benzyl-N^α-carboxy-L -lysine anhydride. The resulting poly (N^?-benzyloxycarbonyl, N^?-benzyl-L -lysine) was obtained in high yield and had a high molecular weight. The protected polymer was removed into poly (N^?-benzyl-L -lysine) by treating it with hydrogen bromide. From the results of the ORD and CD, the protected polymer has a righthanded α-helix, showing [m′]₂₃₃ = –10,300, [θ]₂₂₀ = –27,600 and [θ]₂₀₇ = –25,100 in dioxane. The breakdown of the helical conformation is found to occur at 8% dichloroacetic acid in chloroform-dichloroacetic acid mixture. In the pH range 3.35–6.90, poly (N^?-benzyl-L -lysine) is in a random coil structure. In the pH range 7.50–13.0, the polypeptide has a right-handed α-helix structure; [m′]₂₃₃ = –12,000, [0]₂₂₀ = –27,200, and [0]₂₀₇ = –27,000. In comparison with poly-L -lysine, the coil-to-helix transition is observed at lower pH range in 50% n-propanol. Above pH 8 by heating, the α ? β transition of poly (N^?-benzyl-L -lysine) is not observed in an aqueous media.     

Transgene delivery using poly(amino ether)-gold nanorod assemblies

Gold nanorods (GNRs) have emerged as promising nanomaterials for biosensing, imaging, photothermal treatment, and therapeutic delivery for several diseases, including cancer. We have generated poly(amino ether)-functionalized gold nanorods (PAE-GNRs) using a layer-by-layer deposition approach; polymers from a poly(amino ether) library recently synthesized in our laboratory were employed to generate the PAE-GNR assemblies. PAE-GNR assemblies demonstrate long-term colloidal stability as well as the capacity to bind plasmid DNA by means of electrostatic interactions. Sub-toxic concentrations of PAE-GNRs were employed to deliver plasmid DNA to prostate cancer cells in vitro. PAE-GNRs generated using 1,4C-1,4Bis, a cationic polymer from our laboratory demonstrated significantly higher transgene expression and exhibited lower cytotoxicities when compared to similar assemblies generated using 25 kDa poly(ethylene imine) (PEI25k-GNRs), a current standard for polymer-mediated gene delivery. The roles of polyelectrolyte chemistry and zeta-potential in determining transgene expression efficacies of PAE-GNR assemblies were investigated. Our results indicate that stable and effective PAE-GNR assemblies are a promising engineered platform for transgene delivery. PAE-GNRs also have the potential to be used simultaneously for photothermal ablation, photothermally enhanced drug and gene delivery, and biological imaging, thus making them a powerful theranostic platform.     

Controlled release of proteins from their poly(ethylene glycol) conjugates: drug delivery systems employing 1,6-elimination

Several tripartate releasable PEG linkers (rPEG) that can provide anchimeric assistance to hydrolysis (cyclization prodrugs) were prepared and, after conjugation to lysozyme demonstrated rapid cleavage in rat plasma compared to nonassisted, permanently bound PEG. By varying the chemical structure and adding steric hindrance, the half-life of the protein conjugates can be adjusted from slow to very fast. The pharmacokinetics (PK) of regeneration of native protein, from various rPEG conjugates can, for the first time, be easily followed in the rat using green fluorescent protein. The PK in mice was also determined for rPEG-Interleukin 2 (rPEG-IL-2) conjugates in vivo using an ELISA assay. Thus, a systematic study of rPEGylated proteins, either in vivo or in vitro during processing, has been investigated based on regeneration of native protein. The employment of releasable PEG polymers substantially broadens the applications of PEGylation drug delivery technology by introducing the benefits of controlled release of native protein therapeutics.     

Synthesis and antihyperlipidemic activity of acetylated derivative of ulvan from Ulva pertusa

In this study, acetylated ulvan (AU) was prepared with acetic anhydride in N,N-dimethylacetamide, and the antihyperlipidemic activity of natural ulvan and its acetylated ulvan derivative (AU) in mice was determined. Obvious differences in antihyperlipidemic activity between natural ulvan and its derivative were observed, moreover, AU showed stronger antihyperlipidemic activity on triglyceride (TG) and low density lipoprotein cholesterol (LDL-C).     

Sustained release of the antitumor drug paclitaxel from poly(3-hydroxybutyrate)-based microspheres

The development of sustained release formulations based on biodegradable polymers is a promising trend in modern pharmacology. Polyhydroxyalkanoates (PHA) attract increasing attention due to their biodegradability and high biocompatibility, which make them suitable for the development of novel drug dosage forms. We have produced poly(3-hydroxybutyrate) (PHB)-based microspheres loaded with the antitumor drug paclitaxel and investigated morphology, drug release kinetics and the effect of these microspheres on tumor cells in vitro. The data on the kinetics of drug release, biocompatibility and biological activity of the biopolymer microspheres in vitro have demonstrated that the studied system of prolonged drug release had lower toxicity and higher efficiency compared to the traditional dosage forms of paclitaxel.     

Self-assembled poly(butadiene)-b-poly(ethylene oxide) polymersomes as paclitaxel carriers

In this work, self-assembled poly(butadiene)-b-poly(ethylene oxide) (PB-PEO) polymersomes (polymer vesicles) and worm micelles were evaluated as paclitaxel carriers. Paclitaxel was successfully incorporated into PB-PEO polymersomes and worm micelles. The loading capacity of paclitaxel inside PB-PEO colloids ranged from 6.7% to 13.7% w/w, depending on the morphology of copolymer colloids and the molecular weight of diblock copolymer. Paclitaxel loaded OB4 (PB219-PEO121) polymersome formulations were colloidally stable for 4 months at 4 degrees C and exhibited slow steady release of paclitaxel over a 5 week period at 37 degrees C. Evaluation of the in vitro cytotoxicity of paclitaxel-polymersome formulations showed that the ability of paclitaxel-loaded polymersomes to inhibit proliferation of MCF-7 human breast cancer cells was less compared to paclitaxel alone. By increasing the concentration of paclitaxel in polymersomes from 0.02 to 0.2 mug/mL, paclitaxel-polymersome formulations showed comparable activity in inhibiting the growth of MCF-7 cells. Taken together, these results demonstrate that paclitaxel-polymersomes have desirable restrained release profile and exhibit long-term stability.     

Stepwise self-assembled poly(amidoamine) dendrimer and poly(styrenesulfonate) microcapsules as sustained delivery vehicles

Hollow microcapsules comprised of poly(styrenesulfonate) (PSS) and a fourth generation poly(amidoamine) dendrimer (4G PAMAM) were prepared by depositing PSS/4G PAMAM multilayers on melamine formaldehyde (MF) colloid particles by the layer-by-layer self-assembly technique and subsequently dissolving the templated cores. The PSS/4G PAMAM layers were unstable toward the core removal procedure (pH approximately 1), resulting in a low yield of intact hollow capsules (<10% for 3.5 microm diameter MF templates). Stretching of the multilayer film due to core swelling during MF core dissolution leads to partial or complete destruction of capsules, giving discrete PSS-4G PAMAM complexes. Yields were increased by increasing inter- and intramolecular attractive forces between the PSS chains in the capsules through electrostatic, hydrophobic, and a combination of these interactions. The yields, however, were practically unaffected by enhancing such effects between dendrimer molecules. Transmission electron microscopy and scanning force microscopy measurements show no deformation for 3.5 microm capsules stabilized through the various interactions stated above. Further, capsules were filled with low molecular weight dextran sulfate and subsequently loaded with a model, therapeutically active molecule, doxorubicin hydrochloride (DOX). Release of DOX from the capsules was also studied to highlight the drug delivery potential of the dendrimer-based microcapsules.     

Synthesis and self-assembly of a DNA-conjugated poly(propylene glycol) derivative

Due to several characteristic features of DNA (e.g., genetic coding transfer and nanoscaled accuracy or so), DNA based compounds have been recently highlighted in a variety of research fields, including physics, chemistry, engineering or so. To date, they have been expanded into a hybrid form conjugated with conventional polymer groups. Such synthetic hybrid conjugates can be organized into multi-dimensional nanoor micro-structures; rod, sheet, and spherical shaped nanomaterials [1]. In this study, we showed a novel block copolymer composed of DNA and poly(propylene glycol) (PPG) (designated as DNA-b-PPG) for the self-assembled construction into three-dimensional vesicular structures.     

Interaction of actinocin derivative with different poly(rC) structures

The interaction of actinocin derivative Act III with single- and double-stranded poly(rC) has been investigated by the methods of differential scanning microcalorimetry and UV-vis absorption spectroscopy. It was shown that, after the addition of the ligand, the temperature, enthalpy and entropy of poly (rC) melting decrease. The analysis of poly(rC)-ActIII absorption spectra indicated that the conformation of polynucleotide differs from that of free poly (rC) in the presence of ActHI at pH 4.46 and pH 6.0. Using the DALSMOD optimization program, the parameters of interaction of Act III with poly (rC) were calculated. It was found that the binding constant of ActHI with double-stranded poly (rC) is essentially higher than that with the single-stranded one upon monomeric binding. On the basis of these data, we conclude that the conformation changes of the matrix are the main cause of the decrease in melting temperature and enthalpy observed by calorimetry. Possible mechanisms of interaction of actinocin derivative with poly (rC) are discussed.     

Synthesis and evaluation of a star amphiphilic block copolymer from poly(epsilon-caprolactone) and poly(ethylene glycol) as a potential drug delivery carrier

A star polymer composed of amphiphilic block copolymer arms has been synthesized and characterized. The core of the star polymer is polyamidoamine (PAMAM) dendrimer, the inner block in the arm is lipophilic poly(epsilon-caprolactone) (PCL), and the outer block in the arm is hydrophilic poly(ethylene glycol) (PEG). The star-PCL polymer was synthesized first by ring-opening polymerization of epsilon-caprolactone with a PAMAM-OH dendrimer as initiator. The PEG polymer was then attached to the PCL terminus by an ester-forming reaction. Characterization with SEC, (1)H NMR, FTIR, TGA, and DSC confirmed the star structure of the polymers. The micelle formation of the star copolymer (star-PCL-PEG) was studied by fluorescence spectroscopy. Hydrophobic dyes and drugs can be encapsulated in the micelles. A loading capacity of up to 22% (w/w) was achieved with etoposide, a hydrophobic anticancer drug. A cytotoxicity assay demonstrated that the star-PCL-PEG copolymer is nontoxic in cell culture. This type of block copolymer can be used as a drug delivery carrier.     

Development of environmentally friendly coatings and paints using medium-chain-length poly(3-hydroxyalkanoates) as the polymer binder.

Unsaturated medium-chain-length poly(3-hydroxyalkanoates) (mcl-PHAs) produced by Pseudomonas putida from linseed oil fatty acids (LOFA) and tall oil fatty acids (TOFA), were used as the polymer binder in the formulation of high solid alkyd-like paints. The relatively high concentration of unsaturated alkyl side chains incorporated into the PHA resins resulted in oxidative drying PHA paints having excellent coating properties. The homogeneously pigmented PHA coatings yielded high-gloss, smooth and strong films upon curing and showed an excellent flexibility, a good adhesion to different substrates, cohesive film properties and resistance to chipping.     

Swelling of cellulose derivative (HPMC) matrix systems for drug delivery

The water swellable hydrogels are commonly used in the production of solid pharmaceutical dosage systems for oral administration (matrices). Their use allows to obtain the controlled drug release. The key role is played by the transport phenomena which take place: water up-take, gel swelling and erosion, increase in diffusivity due to hydration. Thus, knowledge of these phenomena is fundamental in designing and realizing the pharmaceutical systems.In this work, tablets made of pure hydrogel, HydroxyPropyl-MethylCellulose (HPMC), were produced and immersed in a thermostatic bath filled with stirred distilled water (37 °C). The water up-take was allowed only by radial direction (from the lateral surface) by confining the tablet between two glass slides. Two distinct methods, an optical technique already described in a previous work, and a gravimetric procedure described here, were applied to measure the water concentration profiles along the radial direction in the tablets. The data obtained were used both to clarify the nature of the transport phenomena involved, and to perform a better tuning of a mathematical model previously proposed.     

Synthesis of a novel duocarmycin derivative DU-257 and its application to immunoconjugate using poly(ethylene glycol)-dipeptidyl linker capable of tumor specific activation

Novel anti-tumor agent, duocarmycin derivative DU-257, was designed and synthesized to prepare immunoconjugate in order to confirm the feasibility of enzymatically cleavable linker consisting of poly(ethylene glycol) (PEG) and dipeptide, L-alanyl-L-valine. Oxyethylamine arm was introduced at 4-methoxy position of segment B of DU-86 to form DU-257 and evaluated its property. DU-257 retained similar stability and potency with DU-86 while enhanced hydrophilicity suggested. DU-257 was condensed to the PEG-dipeptidyl linker through carboxyl terminal of dipeptide, and enzymatic release of DU-257 using a model enzyme, thermolysin, similar enzyme of which was shown to be overexpressed at various tumor sites, was evaluated by HPLC analysis. Cleavage between the linker amino acids by the model protease and release of DU-257 as valine conjugated form was confirmed. The enzymatically released form of DU-257 expressed its cytotoxicity without loss of the potency for HeLaS3 and SW1116 tumor cell lines, although the efficacy was different in individual cells. DU-257 was then conjugated through the linker to KM231 monoclonal antibody specifically reactive to GD3 antigen which was shown to be expressed on the surface of many malignant tumors such as SW1116. The conjugate retained its binding specificity for SW1116 cell with a similar activity with KM231. Furthermore, the conjugate showed significant growth inhibition on SW1116 cell at a concentration of 75 microg/mL while no effect on antigen negative cell, HeLaS3. These results suggest that the conjugate retained its anti-tumor effect only when it bound on and was activated at the target cell, simultaneously. DU-257 will be one of the candidate of anti-tumor agent for application to immunoconjugate and its conjugate with KM231 via PEG-dipeptidyl linker will be a useful entity for cancer therapy related to sLe(a) expression.     

A tetra(L-lysine)-grafted poly(organophosphazene) for gene delivery

In order to develop a new gene delivery vector, a novel cationic poly(organophosphazene) was synthesized by stepwise nucleophilic substitutions of poly(dichlorophosphazene) with a hydrophilic methoxy-poly(ethylene glycol) (MPEG) as a shielding group and a branched tetra(L-lysine), LysLys(LysEt)(2), as a cationic moiety. The cationic polymer has shown to form a polyplex by DNA condensation and very low in vitro cytotoxicity probably due to the shielding effect of MPEG, which provides a basis for improving the low gene transfection yield of cationic polyphosphazenes.     

Surface functionalization of gold nanoparticles using hetero-bifunctional poly(ethylene glycol) spacer for intracellular tracking and delivery

For the development of surface-functionalized gold nanoparticles as cellular probes and delivery agents, we have synthesized hetero-bifunctional poly(ethylene glycol) (PEG, MW 1500) having a thiol group on one terminus and a reactive functional group on the other for use as a flexible spacer. Coumarin, a model fluorescent dye, was conjugated to one end of the PEG spacer and gold nanoparticles were modified with coumarin-PEG-thiol. Surface attachment of coumarin through the PEG spacer decreased the fluorescence quenching effect of gold nanoparticles. The results of cellular cytotoxicity and fluorescence confocal analyses showed that the PEG spacer-modified nanoparticles were essentially non-toxic and could be efficiently internalized in the cells within 1 hour of incubation. Intracellular particle tracking using a Keck 3-D Fusion Microscope System showed that the functionalized gold nanoparticles were rapidly internalized in the cells and localized in the peri-nuclear region. Using the PEG spacer, the gold nano-platform can be conjugated with a variety of biologically relevant ligands such as fluorescent dyes, antibodies, etc in order to target, probe, and induce a stimulus at the target site.