A peptide derived from the Shaker B K+ channel produces short and long blocks of reconstituted Ca(2+)-dependent K+ channels.

A 20 amino acid synthetic peptide, corresponding to the amino-terminal region of the Shaker B (ShB) K+ channel and responsible for its fast inactivation, can block large conductance Ca(2+)-dependent K+ channels from rat brain and muscle. The ShB inactivation peptide produces two kinetically distinct blocking events in these channels. At lower concentrations, it produces short blocks, and at higher concentrations long-lived blocks also appear. The L7E mutant peptide produces only infrequent short blocks (no long-lived blocks) at a much higher concentration. Internal tetraethylammonium competes with the peptide for the short block, which is also relieved by K+ influx. These results suggest that the peptide induces the short block by binding within the pore of Ca(2+)-dependent K+ channels. The long block is not affected by increased K+ influx, indicating that the binding site mediating this block may be different from that involved in the short block. The short block of Ca(2+)-dependent K+ channels and the inactivation of Shaker exhibit similar characteristics with respect to blocking affinity and open pore blockade. This suggests a conserved binding region for the peptide in the pore regions of these very different classes of K+ channel.     

Affinity and location of an internal K+ ion binding site in shaker K channels

We have examined the interaction between TEA and K+ ions in the pore of Shaker potassium channels. We found that the ability of external TEA to antagonize block of Shaker channels by internal TEA depended on internal K+ ions. In contrast, this antagonism was independent of external K+ concentrations between 0.2 and 40 mM. The external TEA antagonism of internal TEA block increased linearly with the concentration of internal K+ ions. In addition, block by external TEA was significantly enhanced by increases in the internal K+ concentration. These results suggested that external TEA ions do not directly antagonize internal TEA, but rather promote increased occupancy of an internal K+ site by inhibiting the emptying of that site to the external side of the pore. We found this mechanism to be quantitatively consistent with the results and revealed an intrinsic affinity of the site for K+ ions near 65 mM located approximately 7% into the membrane electric field from the internal end of the pore. We also found that the voltage dependence of block by internal TEA was influenced by internal K+ ions. The TEA site (at 0 internal K+) appeared to sense approximately 5% of the field from the internal end of the pore (essentially colocalized with the internal K+ site). These results lead to a refined picture of the number and location of ion binding sites at the inner end of the pore in Shaker K channels.     

Tyrosine phosphorylation of the inactivating peptide of the shaker B potassium channel: a structural-functional correlate

A synthetic peptide patterned after the sequence of the inactivating "ball" domain of the Shaker B K(+) channel restores fast (N-type) inactivation in mutant deletion channels lacking their constitutive ball domains, as well as in K(+) channels that do not normally inactivate. We now report on the effect of phosphorylation at a single tyrosine in position 8 of the inactivating peptide both on its ability to restore fast channel inactivation in deletion mutant channels and on the conformation adopted by the phosphorylated peptide when challenged by anionic lipid vesicles, a model target mimicking features of the inactivation site in the channel protein. We find that the inactivating peptide phosphorylated at Y8 behaves functionally as well as structurally as the noninactivating mutant carrying the mutation L7E. Moreover, it is observed that the inactivating peptide can be phosphorylated by the Src tyrosine kinase either as a free peptide in solution or when forming part of the membrane-bound protein channel as the constitutive inactivating domain. These findings suggest that tyrosine phosphorylation-dephosphorylation of this inactivating ball domain could be of physiological relevance to rapidly interconvert fast-inactivating channels into delayed rectifiers and vice versa.     

Selectivity filter gating in large-conductance Ca(2+)-activated K+ channels

Membrane voltage controls the passage of ions through voltage-gated K (K(v)) channels, and many studies have demonstrated that this is accomplished by a physical gate located at the cytoplasmic end of the pore. Critical to this determination were the findings that quaternary ammonium ions and certain peptides have access to their internal pore-blocking sites only when the channel gates are open, and that large blocking ions interfere with channel closing. Although an intracellular location for the physical gate of K(v) channels is well established, it is not clear if such a cytoplasmic gate exists in all K(+) channels. Some studies on large-conductance, voltage- and Ca(2+)-activated K(+) (BK) channels suggest a cytoplasmic location for the gate, but other findings question this conclusion and, instead, support the concept that BK channels are gated by the pore selectivity filter. If the BK channel is gated by the selectivity filter, the interactions between the blocking ions and channel gating should be influenced by the permeant ion. Thus, we tested tetrabutyl ammonium (TBA) and the Shaker "ball" peptide (BP) on BK channels with either K(+) or Rb(+) as the permeant ion. When tested in K(+) solutions, both TBA and the BP acted as open-channel blockers of BK channels, and the BP interfered with channel closing. In contrast, when Rb(+) replaced K(+) as the permeant ion, TBA and the BP blocked both closed and open BK channels, and the BP no longer interfered with channel closing. We also tested the cytoplasmically gated Shaker K channels and found the opposite behavior: the interactions of TBA and the BP with these K(v) channels were independent of the permeant ion. Our results add significantly to the evidence against a cytoplasmic gate in BK channels and represent a positive test for selectivity filter gating.     

Reconstitution of expressed KCa channels from Xenopus oocytes to lipid bilayers.

Reconstitution of large conductance calcium-activated potassium (KCa) channels from native cell membranes into planar lipid bilayers provides a powerful method to study single channel properties, including ion conduction, pharmacology, and gating. Recently, KCa channels derived from the Drosophila Slowpoke (Slo) gene have been cloned and heterologously expressed in Xenopus oocytes. In this report, we describe the reconstitution of cloned and expressed Slo KCa channels from Xenopus oocyte membranes into lipid bilayers. The reconstituted channels demonstrate functional properties characteristic of native KCa channels. They possess a mean unitary conductance of approximately 260 pS in symmetrical potassium (250 mM), and they are voltage- and calcium-sensitive. At 50 microM Ca2+, their half-activation potential was near -20 mV; and their affinity for calcium is in the micromolar range. Reconstituted Slo KCa channels were insensitive to external charybdotoxin (40-500 nM) and sensitive to micromolar concentrations of external tetraethylammonium (KD = 158 microM, at 0 mV) and internal Ba2+ (KD = 76 microM, at 40 mV). In addition, they were blocked by internally applied "ball" inactivating peptide (KD = 480 microM, at 40 mV). These results demonstrate that cloned KCa channels expressed in Xenopus oocytes can be readily incorporated into lipid bilayers where detailed mechanistic studies can be performed under controlled internal and external experimental conditions.     

A marine snail neurotoxin shares with scorpion toxins a convergent mechanism of blockade on the pore of voltage-gated K channels.

kappa-Conotoxin-PVIIA (kappa-PVIIA) belongs to a family of peptides derived from a hunting marine snail that targets to a wide variety of ion channels and receptors. kappa-PVIIA is a small, structurally constrained, 27-residue peptide that inhibits voltage-gated K channels. Three disulfide bonds shape a characteristic four-loop folding. The spatial localization of positively charged residues in kappa-PVIIA exhibits strong structural mimicry to that of charybdotoxin, a scorpion toxin that occludes the pore of K channels. We studied the mechanism by which this peptide inhibits Shaker K channels expressed in Xenopus oocytes with the N-type inactivation removed. Chronically applied to whole oocytes or outside-out patches, kappa-PVIIA inhibition appears as a voltage-dependent relaxation in response to the depolarizing pulse used to activate the channels. At any applied voltage, the relaxation rate depended linearly on the toxin concentration, indicating a bimolecular stoichiometry. Time constants and voltage dependence of the current relaxation produced by chronic applications agreed with that of rapid applications to open channels. Effective valence of the voltage dependence, zdelta, is approximately 0.55 and resides primarily in the rate of dissociation from the channel, while the association rate is voltage independent with a magnitude of 10(7)-10(8) M-1 s-1, consistent with diffusion-limited binding. Compatible with a purely competitive interaction for a site in the external vestibule, tetraethylammonium, a well-known K-pore blocker, reduced kappa-PVIIA's association rate only. Removal of internal K+ reduced, but did not eliminate, the effective valence of the toxin dissociation rate to a value <0.3. This trans-pore effect suggests that: (a) as in the alpha-KTx, a positively charged side chain, possibly a Lys, interacts electrostatically with ions residing inside the Shaker pore, and (b) a part of the toxin occupies an externally accessible K+ binding site, decreasing the degree of pore occupancy by permeant ions. We conclude that, although evolutionarily distant to scorpion toxins, kappa-PVIIA shares with them a remarkably similar mechanism of inhibition of K channels.     

External TEA block of shaker K+ channels is coupled to the movement of K+ ions within the selectivity filter

Recent molecular dynamic simulations and electrostatic calculations suggested that the external TEA binding site in K+ channels is outside the membrane electric field. However, it has been known for some time that external TEA block of Shaker K+ channels is voltage dependent. To reconcile these two results, we reexamined the voltage dependence of block of Shaker K+ channels by external TEA. We found that the voltage dependence of TEA block all but disappeared in solutions in which K+ ions were replaced by Rb+. These and other results with various concentrations of internal K+ and Rb+ ions suggest that the external TEA binding site is not within the membrane electric field and that the voltage dependence of TEA block in K+ solutions arises through a coupling with the movement of K+ ions through part of the membrane electric field. Our results suggest that external TEA block is coupled to two opposing voltage-dependent movements of K+ ions in the pore: (a) an inward shift of the average position of ions in the selectivity filter equivalent to a single ion moving approximately 37% into the pore from the external surface; and (b) a movement of internal K+ ions into a vestibule binding site located approximately 13% into the membrane electric field measured from the internal surface. The minimal voltage dependence of external TEA block in Rb+ solutions results from a minimal occupancy of the vestibule site by Rb+ ions and because the energy profile of the selectivity filter favors a more inward distribution of Rb+ occupancy.     

N-type inactivation and the S4-S5 region of the Shaker K+ channel

The intracellular segment of the Shaker K+ channel between transmembrane domains S4 and S5 has been proposed to form at least part of the receptor for the tethered N-type inactivation "ball." We used the approach of cysteine substitution mutagenesis and chemical modification to test the importance of this region in N-type inactivation. We studied N-type inactivation or the block by a soluble inactivation peptide ("ball peptide") before and after chemical modification by methanethiosulfonate reagents. Particularly at position 391, chemical modification altered specifically the kinetics of ball peptide binding without altering other biophysical properties of the channel. Results with reagents that attach different charged groups at 391 C suggested that there are both electrostatic and steric interactions between this site and the ball peptide. These findings identify this site to be in or near the receptor site for the inactivation ball. At many of the other positions studied, modification noticeably inhibited channel current. The accessible cysteines varied in the state-dependence of their modification, with five- to tenfold changes in reactions rate depending on the gating state of the channel.     

The external TEA binding site and C-type inactivation in voltage-gated potassium channels

The location of the tetraethylammonium (TEA) binding site in the outer vestibule of K+ channels, and the mechanism by which external TEA slows C-type inactivation, have been considered well-understood. The prevailing model has been that TEA is coordinated by four amino acid side chains at the position equivalent to Shaker T449, and that TEA prevents a constriction that underlies inactivation via a foot-in-the-door mechanism at this same position. However, a growing body of evidence has suggested that this picture may not be entirely correct. In this study, we reexamined these two issues, using both the Kv2.1 and Shaker potassium channels. In contrast to results previously obtained with Shaker, substitution of the tyrosine at Kv2.1 position 380 (equivalent to Shaker 449) with a threonine or cysteine had a relatively minor effect on TEA potency. In both Kv2.1 and Shaker, modification of cysteines at position 380/449 by 2-(trimethylammonium)ethyl methanethiosulfonate (MTSET) proceeded at identical rates in the absence and presence of TEA. Additional experiments in Shaker demonstrated that TEA bound well to C-type inactivated channels, but did not interfere with MTSET modification of C449 in inactivated channels. Together, these findings rule out the possibility that TEA binding involves an intimate interaction with the four side chains at the position equivalent to Shaker 449. Moreover, these results argue against the model whereby TEA slows inactivation via a foot-in-the-door mechanism at position 449, and also argue against the hypothesis that the position 449 side chains move toward the center of the conduction pathway during inactivation. Occupancy by TEA completely prevented MTSET modification of a cysteine in the outer-vestibule turret (Kv2.1 position 356/Shaker position 425), which has been shown to interfere with both TEA binding and the interaction of K+ with an external binding site. Together, these data suggest that TEA is stabilized in a more external position in the outer vestibule, and does not bind via direct coordination with any specific outer-vestibule residues.     

Kaliotoxin, a novel peptidyl inhibitor of neuronal BK-type Ca(2+)-activated K+ channels characterized from Androctonus mauretanicus mauretanicus venom.

A peptidyl inhibitor of the high conductance Ca(2+)-activated K+ channels (KCa) has been purified to homogeneity from the venom of the scorpion Androctonus mauretanicus mauretanicus. The peptide has been named kaliotoxin (KTX). It is a single 4-kDa polypeptide chain. Its complete amino acid sequence has been determined. KTX displays sequence homology with other scorpion-derived inhibitors of Ca(2+)-activated or voltage-gated K+ channels: 44% homology with charybdotoxin (CTX), 52% with noxiustoxin (NTX), and 44% with iberiotoxin (IbTX). Electrophysiological experiments performed in identified nerve cells from the mollusc Helix pomatia showed that KTX specifically suppressed the whole cell Ca(2+)-activated K+ current. KTX had no detectable effects on voltage-gated K+ current (delayed rectifier and fast transient A current) or on L-type Ca2+ currents. KTX interacts in a one-to-one way with KCa channels with a Kd of 20 nM. Single channel experiments were performed on high conductance KCa channels excised from the above Helix neurons and from rabbit coeliac ganglia sympathetic neurons. KTX acted exclusively at the outer face of the channel. KTX applied on excised outside-out KCa channels induced a transient period of fast-flicker block followed by a persistent channel blockade. The KTX-induced block was not voltage-dependent which suggests differences in the blockade of KCa channels by KTX and by CTX. Comparison of KTX and CTX sequences leads to the identification of a short amino acid sequence (26-33) which may be implicated in the toxin-channel interaction. KTX therefore appears to be a useful tool for elucidating the molecular pharmacology of the high conductance Ca(2+)-activated K+ channel.     

Interaction of charybdotoxin with permeant ions inside the pore of a K+ channel.

Charybdotoxin (CTX) blocks high conductance Ca(2+)-activated K+ channels by binding to a receptor site in the externally facing "mouth." Toxin bound to the channel can be destabilized from its site by K+ entering the channel from the opposite, internal, solution. By analyzing point mutants of CTX expressed in E. coli, assayed with single Ca(2+)-activated K+ channels reconstituted into planar lipid bilayers, we show that a single positively charged residue of the peptide, Lys-27, wholly mediates this interaction of K+ with CTX. If position 27 carries a positively charged residue, internal K+ accelerates the dissociation rate of CTX in a voltage-dependent manner; however, if a neutral Asn or Gln is substituted at this position, the dissociation rate is completely insensitive to either internal K+ or applied voltage. Position 27 is unique in this respect; charge-neutral substitutions made at other positions fail to eliminate the K+ destabilization phenomenon. The results argue that CTX bound to the channel positions Lys-27 physically close to a K(+)-specific binding site on the external end of the conduction pathway and that a K+ ion occupying this site destabilizes CTX via direct electrostatic repulsion with the epsilon-amino group of Lys-27.     

Binding of kappa-conotoxin PVIIA to Shaker K+ channels reveals different K+ and Rb+ occupancies within the ion channel pore

The x-ray structure of the KcsA channel at different [K(+)] and [Rb(+)] provided insight into how K(+) channels might achieve high selectivity and high K(+) transit rates and showed marked differences between the occupancies of the two ions within the ion channel pore. In this study, the binding of kappa-conotoxin PVIIA (kappa-PVIIA) to Shaker K(+) channel in the presence of K(+) and Rb(+) was investigated. It is demonstrated that the complex results obtained were largely rationalized by differences in selectivity filter occupancy of this 6TM channels as predicted from the structural work on KcsA. kappa-PVIIA inhibition of the Shaker K(+) channel differs in the closed and open state. When K(+) is the only permeant ion, increasing extracellular [K(+)] decreases kappa-PVIIA affinity for closed channels by decreasing the "on" binding rate, but has no effect on the block of open channels, which is influenced only by the intracellular [K(+)]. In contrast, extracellular [Rb(+)] affects both closed- and open-channel binding. As extracellular [Rb(+)] increases, (a) binding to the closed channel is slightly destabilized and acquires faster kinetics, and (b) open channel block is also destabilized and the lowest block seems to occur when the pore is likely filled only by Rb(+). These results suggest that the nature of the permeant ions determines both the occupancy and the location of the pore site from which they interact with kappa-PVIIA binding. Thus, our results suggest that the permeant ion(s) within a channel pore can determine its functional and pharmacological properties.     

Mapping the receptor site for charybdotoxin, a pore-blocking potassium channel inhibitor.

The Shaker K+ channel belongs to a family of structurally related voltage-activated cation channels that play a central role in cellular electrical signaling. By studying multiple site-directed mutants of the Shaker K+ channel, a region that forms the binding site for a pore-blocking scorpion toxin has been identified. The region contains a sequence that is highly conserved among cloned K+ channels and may contribute to the formation of the ion conduction pore.     

Phosphatidylinositol 3-phosphate indirectly activates KCa3.1 via 14 amino acids in the carboxy terminus of KCa3.1

KCa3.1 is an intermediate conductance Ca2+-activated K+ channel that is expressed predominantly in hematopoietic cells, smooth muscle cells, and epithelia where it functions to regulate membrane potential, Ca2+ influx, cell volume, and chloride secretion. We recently found that the KCa3.1 channel also specifically requires phosphatidylinositol-3 phosphate [PI(3)P] for channel activity and is inhibited by myotubularin-related protein 6 (MTMR6), a PI(3)P phosphatase. We now show that PI(3)P indirectly activates KCa3.1. Unlike KCa3.1 channels, the related KCa2.1, KCa2.2, or KCa2.3 channels do not require PI(3)P for activity, suggesting that the KCa3.1 channel has evolved a unique means of regulation that is critical for its biological function. By making chimeric channels between KCa3.1 and KCa2.3, we identified a stretch of 14 amino acids in the carboxy-terminal calmodulin binding domain of KCa3.1 that is sufficient to confer regulation of KCa2.3 by PI(3)P. However, mutation of a single potential phosphorylation site in these 14 amino acids did not affect channel activity. These data together suggest that PI(3)P and these 14 amino acids regulate KCa3.1 channel activity by recruiting an as yet to be defined regulatory subunit that is required for Ca2+ gating of KCa3.1.     

A developmental model for generating frequency maps in the reptilian and avian cochleas.

Hair cells in the turtle cochlea are frequency-tuned by a mechanism involving the combined activation of voltage-sensitive Ca2+ channels and Ca(2+)-activated K+ (KCa) channels. The main determinants of a hair cell's characteristic frequency (Fo) are the KCa channels' density and kinetics, both of which change systematically with location in the cochlea in conjunction with the observed frequency map. We have developed a model based on the differential expression of two KCa channel subunits, which when accompanied by concurrent changes in other properties (e.g., density of Ca2+ channels and inwardly rectifying K+ channels), will generate sharp tuning at frequencies from 40 to 600 Hz. The kinetic properties of the two subunits were derived from previous single-channel analysis, and it was assumed that the subunits (A and B) combine to form five species of tetrameric channel (A4, A3B, A2B2, AB3, and B4) with intermediate kinetics and overlapping distribution. Expression of KCa and other channels was assumed to be regulated by diffusional gradients in either one or two chemicals. The results are consistent with both current- and voltage-clamp data on turtle hair cells, and they show that five channel species are sufficient to produce smooth changes in both Fo and kinetics of the macroscopic KCa current. Other schemes for varying KCa channel kinetics are examined, including one that allows extension of the model to the chick cochlea to produce hair cells with Fo's from 130 to 4000 Hz. A necessary assumption in all models is a gradient in the values of the parameters identified with the cell's cytoplasmic Ca2+ buffer.     

The multi-ion nature of the pore in Shaker K+ channels.

We have investigated some of the permeation properties of the pore in Shaker K channels. We determined the apparent permeability ratio of K+, Rb+, and NH4+ ions and block of the pore by external Cs+ ions. Shaker channels were expressed with the baculovirus/Sf9 expression system and the channel currents measured with the whole-cell variant of the patch clamp technique. The apparent permeability ratio, PRb/PK, determined in biionic conditions with internal K+, was a function of external Rb+ concentration. A large change in PRb/PK occurred with reversed ionic conditions (internal Rb+ and external K+). These changes in apparent permeability were not due to differences in membrane potential. With internal K+, PNH4/PK was not a function of external NH4+ concentration (at least over the range 50-120 mM). We also investigated block of the pore by external Cs+ ions. At a concentration of 20 mM, Cs+ block had a voltage dependence equivalent to that of an ion with a valence of 0.91; this increased to 1.3 at 40 mM Cs+. We show that a 4-barrier, 3-site permeation model can simulate these and many of the other known properties of ion permeation in Shaker channels.     

Adoption of beta structure by the inactivating "ball" peptide of the Shaker B potassium channel.

The conformation of the inactivating peptide of the Shaker B K+ channel (ShB peptide) and that of a noninactivating mutant (ShBL7E peptide) have been studied. Under all experimental conditions explored, the mutant peptide remains in a predominantly nonordered conformation. On the contrary, the inactivating ShB peptide has a great tendency to adopt a highly stable beta structure, particularly when challenged "in vitro" by anionic phospholipid vesicles. Because the putative peptide binding elements at the inner mouth of the channel comprise a ring of anionic residues and a hydrophobic pocket, we hypothesize that the conformational restrictions imposed on the ShB peptide by its interaction with the anionic lipid vesicles could partly imitate those imposed by the above ion channel elements. Thus, we propose that adoption of beta structure by the inactivating peptide may also occur during channel inactivation. Moreover, the difficulties encountered by the noninactivating ShBL7E peptide mutant to adopt beta structure and the observation that trypsin hydrolysis of the ShB peptide prevent both structure formation and channel inactivation lend further support to the hypothesis that adoption of beta structure by the inactivating peptide in a hydrophobic environment is important in determining channel blockade.     

Apical maxi-K (KCa1.1) channels mediate K+ secretion by the mouse submandibular exocrine gland

The exocrine salivary glands of mammals secrete K+ by an unknown pathway that has been associated with HCO3(-) efflux. However, the present studies found that K+ secretion in the mouse submandibular gland did not require HCO3(-), demonstrating that neither K+/HCO3(-) cotransport nor K+/H+ exchange mechanisms were involved. Because HCO3(-) did not appear to participate in this process, we tested whether a K channel is required. Indeed, K+ secretion was inhibited >75% in mice with a null mutation in the maxi-K, Ca2+-activated K channel (KCa1.1) but was unchanged in mice lacking the intermediate-conductance IKCa1 channel (KCa3.1). Moreover, paxilline, a specific maxi-K channel blocker, dramatically reduced the K+ concentration in submandibular saliva. The K+ concentration of saliva is well known to be flow rate dependent, the K+ concentration increasing as the flow decreases. The flow rate dependence of K+ secretion was nearly eliminated in KCa1.1 null mice, suggesting an important role for KCa1.1 channels in this process as well. Importantly, a maxi-K-like current had not been previously detected in duct cells, the theoretical site of K+ secretion, but we found that KCa1.1 channels localized to the apical membranes of both striated and excretory duct cells, but not granular duct cells, using immunohistochemistry. Consistent with this latter observation, maxi-K currents were not detected in granular duct cells. Taken together, these results demonstrate that the secretion of K+ requires and is likely mediated by KCa1.1 potassium channels localized to the apical membranes of striated and excretory duct cells in the mouse submandibular exocrine gland.     

Interaction between ion channel-inactivating peptides and anionic phospholipid vesicles as model targets.

Studies of rapid (N-type) inactivation induced by different synthetic inactivating peptides in several voltage-dependent cation channels have concluded that the channel inactivation "entrance" (or "receptor" site for the inactivating peptide) consists of a hydrophobic vestibule within the internal mouth of the channel, separated from the cytoplasm by a region with a negative surface potential. These protein domains are conformed from alternative sequences in the different channels and thus are relatively unrestricted in terms of primary structure. We are reporting here on the interaction between the inactivating peptide of the Shaker B K+ channel (ShB peptide) or the noninactivating ShB-L7E mutant with anionic phospholipid vesicles, a model target that, as the channel's inactivation "entrance," contains a hydrophobic domain (the vesicle bilayer) separated from the aqueous media by a negatively charged vesicle surface. When challenged by the anionic phospholipid vesicles, the inactivating ShB peptide 1) binds to the vesicle surface with a relatively high affinity, 2) readily adopts a strongly hydrogen-bonded beta-structure, likely an intramolecular beta "hairpin," and 3) becomes inserted into the hydrophobic bilayer by its folded N-terminal portion, leaving its positively charged C-terminal end exposed to the extravesicular aqueous medium. Similar experiments carried out with the noninactivating, L7E-ShB mutant peptide show that this peptide 1) binds also to the anionic vesicles, although with a lower affinity than does the ShB peptide, 2) adopts only occasionally the characteristic beta-structure, and 3) has completely lost the ability to traverse the anionic interphase at the vesicle surface and to insert into the hydrophobic vesicle bilayer. Because the negatively charged surface and the hydrophobic domains in the model target may partly imitate those conformed at the inactivation "entrance" of the channel proteins, we propose that channel inactivation likely includes molecular events similar to those observed in the interaction of the ShB peptide with the phospholipid vesicles, i.e., binding of the peptide to the region of negative surface potential, folding of the bound peptide as a beta-structure, and its insertion into the channel's hydrophobic vestibule. Likewise, we relate the lack of channel inactivation seen with the mutant ShB-L7E peptide to the lack of ability shown by this peptide to cross through the anionic interphase and insert into the hydrophobic domains of the model vesicle target.     

State-dependent block of BK channels by synthesized shaker ball peptides

Crystal structures of potassium channels have strongly corroborated an earlier hypothetical picture based on functional studies, in which the channel gate was located on the cytoplasmic side of the pore. However, accessibility studies on several types of ligand-sensitive K(+) channels have suggested that their activation gates may be located near or within the selectivity filter instead. It remains to be determined to what extent the physical location of the gate is conserved across the large K(+) channel family. Direct evidence about the location of the gate in large conductance calcium-activated K(+) (BK) channels, which are gated by both voltage and ligand (calcium), has been scarce. Our earlier kinetic measurements of the block of BK channels by internal quaternary ammonium ions have raised the possibility that they may lack a cytoplasmic gate. We show in this study that a synthesized Shaker ball peptide (ShBP) homologue acts as a state-dependent blocker for BK channels when applied internally, suggesting a widening at the intracellular end of the channel pore upon gating. This is consistent with a gating-related conformational change at the cytoplasmic end of the pore-lining helices, as suggested by previous functional and structural studies on other K(+) channels. Furthermore, our results from two BK channel mutations demonstrate that similar types of interactions between ball peptides and channels are shared by BK and other K(+) channel types.