Comparison of the solution and X-ray structures of barley serine proteinase inhibitor 2

A comparison of the solution n.m.r. structures of barley serine protease inhibitor 2 (BSPI-2) with the X-ray structures of both subtilisin complexed and native BSPI-2 is presented. It is shown that the n.m.r. and X-ray structures are very similar in terms of overall shape, size, polypeptide fold and secondary structure. The average atomic rms difference between the 11 restrained dynamics structures on the one hand and the two X-ray structures on the other is 1.9 +/- 0.2 A for the backbone atoms and 3.0 +/- 0.3 A for all atoms. The corresponding values for the restrained energy minimized mean dynamics structure are 1.5 and 2.4 A, respectively.     

Crystal and molecular structure of the serine proteinase inhibitor CI-2 from barley seeds

Chymotrypsin inhibitor 2 (CI-2), a serine proteinase inhibitor from barley seeds, has been crystallized and its three-dimensional structure determined at 2.0-A resolution by the molecular replacement method. The structure has been refined by restrained-parameter least-squares methods to a crystallographic R factor (= sigma parallel Fo magnitude of-Fo parallel/sigma magnitude of Fo) o of 0.198. CI-2 is a member of the potato inhibitor 1 family. It lacks the characteristic stabilizing disulfide bonds of most other members of serine proteinase inhibitor families. The body of CI-2 shows few conformational changes between the free inhibitor and the previously reported structure of CI-2 in complex with subtilisin Novo [McPhalen, C.A., Svendsen, I., Jonassen, I., & James, M.N.G. (1985) Proc. Natl. Acad. Sci. U.S.A. 82, 7242-7246]. However, the reactive site loop has some significant conformational differences between the free inhibitor and its complexed form. The residues in this segment of polypeptide exhibit relatively large thermal motion parameters and some disorder in the uncomplexed form of the inhibitor. The reactive site bond is between Met-59I and Glu-60I in the consecutive sequential numbering of CI-2 (Met-60-Glu-61 according to the alignment of Svendsen et al. [Svendsen, I., Hejgaard, J., & Chavan, J.K. (1984) Carlsberg Res. Commun. 49, 493-502]). The network of hydrogen bonds and electrostatic interactions stabilizing the conformation of the reactive site loop is much less extensive in the free than in the complexed inhibitor.     

Primary structure and reactive site of a novel wheat proteinase inhibitor of subtilisin and chymotrypsin

The proteinase inhibitor WSCI, active in inhibiting bacterial subtilisin and a number of animal chymotrypsins, was purified from endosperm of exaploid wheat (Triticum aestivum, c.v. San Pastore) by ion exchange chromatography and its complete amino acid sequence was established by automated Edman degradation. WSCI consists of a single polypeptide chain of 72 amino acid residues, has a molecular mass of 8126.3 Da and a pl of 5.8. The inhibition constants (Ki) for Bacillus licheniformis subtilisin and bovine pancreatic alpha-chymotrypsin are 3.92 x 10(-9) M and 7.24 x 10(-9) M, respectively. The inhibitor contains one methionine and of tryptophan residue and has a high content of essential amino acids (41 over a total of 72 residues), but no cysteines. The primary structure of WSCI shows high similarity with barley subtilisin-chymotrypsin isoinhibitors of the Cl-2 type and with maize subtilisinchymotrypsin inhibitor MPI. Significant degrees of similarity were also found between sequences of WSCI and of other members of the potato inhibitor I family of the serine proteinase inhibitors. The wheat inhibitor WSCI has a single reactive site (the peptide bond between methionyl-48 and glutamyl-49 residues) as identified by affinity chromatography and sequence analysis.     

Conformational dynamics of chymotrypsin inhibitor 2 by coarse-grained simulations

A coarse-grained dynamic Monte Carlo (MC) simulation method is used to investigate the conformational dynamics of chymotrypsin inhibitor 2 (CI2). Each residue is represented therein by two interaction sites, one at the alpha-carbon and the other on the amino acid side-chain. The energy and geometry parameters extracted from databank structures are used. The calculated rms fluctuations of alpha-carbon atoms are in good agreement with crystallographic temperature factors. The two regions of the protein that pack against each other to form the main hydrophobic core exhibit negatively correlated fluctuations. The conformational dynamics could efficiently be probed by the time-delayed orientational and conformational correlation functions of the virtual bonds: the active site loop, excluding the active site bond, the turn region, and the N-terminal of the alpha-helix are relatively more mobile regions of the structure. A correlation is observed between the hydrogen/deuterium (H/D) exchange behavior and the long-time orientational and conformational autocorrelation function values for CI2. A cooperativity in the rotations of the bonds near in sequence is observed at all time windows, whereas the cooperative rotations of the bonds far along the sequence appear at long time windows; these correlations contribute to the stability of the secondary structures and the tertiary structure, respectively.     

Repetitive region of calpastatin is a functional unit of the proteinase inhibitor

A cDNA portion coding for one of the repetitive regions of pig heart calpastatin (107 kDa) was subcloned into E. coli plasmid pUC119 to express the portion of the proteinase inhibitor gene in bacteria. The expressed protein was a chimaeric protein whose calpastatin segment (130 amino acid residues) was fused with an amino-terminus portion (7 amino acid residues) of beta-galactosidase. The chimaeric protein could inhibit proteolytic activity of calpain (Ca2+-dependent cysteine proteinase), and maintained properties of the authentic calpastatin concerning inhibition specificity and heat stability. These findings led us to conclude that the repetitive region is a functional unit of the proteinase inhibitor.     

Involvement of the C-terminal region of yeast proteinase B inhibitor 2 in its inhibitory action

Yeast proteinase B inhibitor 2 (YIB2), which is composed of 74 amino acid residues, is an unusual serine protease inhibitor, since it lacks disulfide bonds. To identify its reactive site for proteases, we constructed an expression system for a synthetic YIB2 gene and then attempted to change the inhibitory properties of YIB2 by amino acid replacements. The purified wild-type YIB2 inhibited the activity of subtilisin BPN', a protein homologous to yeast proteinase B, although its binding ability was not strong, and a time-dependent decrease in its inhibitory activity was observed, demonstrating that wild-type YIB2 behaves as a temporary inhibitor when subtilisin BPN' is the target protease. Since YIB2 exhibits sequence homology to the propeptide of subtilisin, which inhibits a cognate protease using its C-terminal region, we replaced the six C-termi nal residues of YIB2 with those of the propeptide of subtilisin BPN' to make the mutant YIB2m1. This mutant exhibited markedly increased inhibitory activity toward subtilisin BPN' without a time-dependent decrease in its inhibitory activity. Replacement of only the C-terminal Asn of YIB2 by Tyr, or deletion of the C-terminal Tyr of YIB2m1, inhibited subtilisin, but the ability of these mutants to bind subtilisin and their resistance to proteolytic attack were weaker than those of YIB2m1, indicating that the C-terminal residue contributes to the interaction with the protease to a greater extent than the preceding five residues and that the resistance of YIB2 to proteolyic attack is closely related to its ability to bind a protease. These results demonstrate that YIB2 is a unique protease inhibitor that involves its C-terminal region in the interaction with the protease.     

Binding of a murine proteinase inhibitor to the acrosome region of the human sperm head

Proteinase inhibitors are present in the various glands, tissues, and secretions of the male reproductive tract. Some of these inhibitors bind to the acrosomal region of the sperm, and their release during in vitro or in utero incubation suggests that they may play a role in capacitation. In the mouse, the binding site for a trypsin-acrosin inhibitor, the acceptor, has been implicated in capacitation, zona binding, and the acrosome reaction. This presentation demonstrates that a component, molecular weight ?T20,000, on the human sperm head may recognize the murine inhibitor. Furthermore, the acrosome reaction can be induced in capacitated human sperm by immunoaggregation of bound murine inhibitor. The data indicate that the proteinase inhibitor binding site on the human sperm head may, as with a similar site on murine sperm, play a role in the early events of fertilization. © 1993 Wiley-Liss, Inc.     

Refinement of the three-dimensional solution structure of barley serine proteinase inhibitor 2 and comparison with the structures in crystals.

The three-dimensional structure of barley serine proteinase inhibitor, CI-2, has been determined using nuclear magnetic resonance spectroscopy. The present structure determination is a refinement of the structure previously determined by us, using in the present case stereo-specific assignments, and a virtually complete set of assignments of the two-dimensional nuclear Overhauser spectrum. The structure determination is based on the identification of more than 1300 nuclear Overhauser effects, of which 961 were used in the structure calculation as distance restraints, and on 94 dihedral angle restraints, of which 31 are for chi 1 angles in defined chiral centers. These have been used to calculate a series of 20 three-dimensional structures using a combination of distance geometry, simulated annealing and restrained molecular dynamics. Each of the 20 structures was in agreement within less than 0.5 A of each of the distance restraints and with all dihedral angle restraints. When compared to the geometric average structure of the 20 refined structures the root-mean-square differences for the backbone atoms were 0.8 (+/- 0.2) A and for all atoms were 1.6 (+/- 0.2) A. By comparison, the values obtained for the structures determined previously were 1.4 (+/- 0.2) A and 2.1 (+/- 0.1) A, respectively. The structures were also compared to the structure determined in the crystalline state by X-ray diffraction showing root-mean-square differences of 1.6 (+/- 0.2) A and 2.8 (+/- 0.2) A for the backbone and all atoms, respectively. Common features of the solution structure and the two crystal structures are the four-stranded beta-structure, composed of a pair of parallel strands, and three pairs of antiparallel beta-strands flanked on one side by a 12-residue alpha-helix and on the other side by a loop containing the serine proteinase binding site. The new analysis of the structure has revealed an additional pair of antiparallel beta-strands, consisting of residues 65 to 67 and 81 to 83, that was not seen in either of the crystal structures or the previous solution structure. Identification of this was based on nuclear magnetic resonance evidence for the hydrogen bond (67HN to 81CO) not reported previously. Also the presence of a bifurcated hydrogen bond involving Phe69 CO and HN atoms of Ala77 and Gln78 was observed in solution but not in crystals. Minor differences between the two structures were observed in the phi-angles of residues Met59 and Glu60 in the inhibitory site.     

The determination of the three-dimensional structure of barley serine proteinase inhibitor 2 by nuclear magnetic resonance, distance geometry and restrained molecular dynamics

The solution structure of the 64 residue structured domain (residues 20-83) of barley serine proteinase inhibitor 2 (BSPI-2) is determined on the basis of 403 interproton distance, 34 phi backbone torsion angle and 26 hydrogen bonding restraints derived from n.m.r. measurements. A total of 11 converged structures were computed using a metric matrix distance geometry algorithm and refined by restrained molecular dynamics. The average rms difference between the final 11 structures and the mean structure obtained by averaging their coordinates is 1.4 +/- 0.2 A for the backbone atoms and 2.1 +/- 0.1 A for all atoms. The overall structure, which is almost identical to that found by X-ray crystallography, is disc shaped and consists of a central four component mixed parallel and antiparallel beta-sheet flanked by a 13 residue alpha-helix on one side and the reactive site loop on the other.     

Isolation of a chymotrypsin inhibitor from Culex pipiens by affinity chromatography

A chymotrypsin inhibitor was isolated from adult mosquitoes of Culex pipiens by affinity chromatography. Sepharose with covalently coupled chymotrypsin from Culex larvae was used as the fractionation matrix. The isolated inhibitor migrates as a heavy major and a faint minor band on 7.5% polyacrylamide gel and has a molecular weight of 6,800. At higher concentrations it exhibits a 82% inhibition of the mosquito enzyme. Its inhibitory activity is not affected by pH above 5 and appears stable against heat denaturation.     

Purification of a proteinase and proteinase inhibitor from Tetrahymen a pyriformis

• 1.1. A cysteine proteinase and cysteine proteinase inhibitor have been purified from Tetrahymena.
• 2.2. The proteinase was purified by ammonium sulphate fractionation, gel filtration, ion exchange chromatography and affinity chromatography, and appeared homogeneous by gel filtration and electrophoresis (mol. wt approx 28,000). It hydrolysed BAPNA, degraded azocasein, and converted 80S ribosomes to subunits. Thiol reagents inhibited these activities.
• 3.3. The inhibitor was purified by heat treatment, ammonium sulphate fractionation and ion exchange chromatography, and appeared homogeneous by gel filtration and electrophoresis (mol. wt approx 12.500). The inhibitor was heat stable and it inhibited papain, as well as the Tetrahymena proteinase.

     

Interleukin inhibition by a parasite proteinase inhibitor, taeniaestatin

A proteinase inhibitor, taeniaestatin, isolated from the larval stage of the cestode Taenia taeniaeformis inhibits endogenous IL 2 generation in murine lymphocytes and IL 1 induced proliferation of murine thymocytes in a dose-dependent manner. However, taeniaestatin does not inhibit exogenous IL 2-induced proliferation of an IL 2-dependent cell line at any dose tested. These data indicate that the lack of IL 2 generation may be due in part to inhibition of a crucial cell-associated proteinase subsequent to cellular activation, or the lack of an effective IL 2 signal for differentiation. Our results are novel findings concerning molecular pathways for parasite inhibition of host immune responses, and suggest that selected proteinase inhibitors may be useful in clinical situations in which IL 1 or IL 2 are elevated.     

Hydrolysis of ester substrates of trypsin and chymotrypsin by barley carboxypeptidase

Purified barley carboxypeptidase exhibits high activity against a number of N-substituted amino acid esters, which are commonly used as synthetic substrates for mammalian and microbial proteinases. The proteinases of barley, on the contrary, do not hydrolyse these compounds. Because many other plants contain carboxypeptidases closely resembling the barley enzyme, we conclude that synthetic ester substrates should not be used to detect proteinase activity in extracts of higher plants. Plant carboxypeptidases also liberate C-terminal tryptophan from α-casein. Therefore, casein also is an unreliable substrate for plant proteinases.     

Immunogold localization of chymotrypsin inhibitor-2, a lysine-rich protein,in developing barley endosperm

Chymotrypsin inhibitor-2, a lysine-rich protein in the barley endosperm, has been localized at the ultrastructural level by immunocytochemistry in developing barley endosperm cells 14 days post anthesis. The protein is deposited in the protein bodies. Two morphologically distinct types of protein bodies, small spherical and large irregularly shaped, are present. Golgi-apparatus-derived vesicles whose content is labelled by chymotrypsin inhibitor-2 antibody-gold particles are observed at the Golgi complex and around the vacuoles. These observations indicate that the transport of the protein to the site of deposition is mediated by the Golgi apparatus.Abbreviations CI chymotrypsin inhibitor - DPA days post anthesis - ER endoplasmic reticulum The authors wish to thank Dr. V.R. Franceschi (Department of Botany, Washington State University, Pullman, USA) for many helpful discussions and advice during the work, and the staff at the Electron Microscope Center at Washington State University for technical assistance.     

Determination of three-dimensional structures of proteins by simulated annealing with interproton distance restraints. Application to crambin, potato carboxypeptidase inhibitor and barley serine proteinase inhibitor 2

An automated method, based on the principle of simulated annealing, is presented for determining the three-dimensional structures of proteins on the basis of short (less than 5 A) interproton distance data derived from nuclear Overhauser enhancement (NOE) measurements. The method makes use of Newton's equations of motion to increase temporarily the temperature of the system in order to search for the global minimum region of a target function comprising purely geometric restraints. These consist of interproton distances supplemented by bond lengths, bond angles, planes and soft van der Waals repulsion terms. The latter replace the dihedral, van der Waals, electrostatic and hydrogen-bonding potentials of the empirical energy function used in molecular dynamics simulations. The method presented involves the implementation of a number of innovations over our previous restrained molecular dynamics approach [Clore, G.M., Brünger, A.T., Karplus, M. and Gronenborn, A.M. (1986) J. Mol. Biol., 191, 523-551]. These include the development of a new effective potential for the interproton distance restraints whose functional form is dependent on the magnitude of the difference between calculated and target values, and the design and implementation of robust and fully automatic protocol. The method is tested on three systems: the model system crambin (46 residues) using X-ray structure derived interproton distance restraints, and potato carboxypeptidase inhibitor (CPI; 39 residues) and barley serine proteinase inhibitor 2 (BSPI-2; 64 residues) using experimentally derived interproton distance restraints. Calculations were carried out starting from the extended strands which had atomic r.m.s. differences of 57, 38 and 33 A with respect to the crystal structures of BSPI-2, crambin and CPI respectively. Unbiased sampling of the conformational space consistent with the restraints was achieved by varying the random number seed used to assign the initial velocities. This ensures that the different trajectories diverge during the early stages of the simulations and only converge later as more and more interproton distance restraints are satisfied. The average backbone atomic r.m.s. difference between the converged structures is 2.2 +/- 0.3 A for crambin (nine structures), 2.4 +/- 0.3 A for CPI (eight structures) and 2.5 +/- 0.2 A for BSPI-2 (five structures). The backbone atomic r.m.s. difference between the mean structures derived by averaging the coordinates of the converged structures and the corresponding X-ray structures is 1.2 A for crambin, 1.6 A for CPI and 1.7 A for BSPI-2.