Demethylation of thymine residues affects DNA cleavage by endonucleases but not sequence recognition by drugs.

The 5-methyl group of thymidine residues protrudes into the major groove of double helical DNA. The structural influence of this exocyclic substituent has been examined using a PCR-made 160 bp fragment in which thymidine residues were replaced with uridine residues. We show that the dT-->dU substitution and the consequent deletion of the methyl group affects the cleavage of DNA by deoxyribonuclease I and micrococcal nuclease. Analysis of the DNase I cleavage sites, in terms of di and trinucleotides, indicates that homopolymeric tracts of d(AT) become significantly more susceptible to DNase I cleavage when uridine is substituted for thymidine residues. The results indicate that removal of the thymidine methyl groups from the major groove at AT tracts induces structural perturbations that transmit into the opposite minor groove, where they can be detected by endonuclease probing. In contrast, DNase I footprinting experiments with different mono and bis-intercalating drugs reveal that dT-->dU substitution does not markedly affect sequence-specific drug-DNA recognition in the minor or major groove of the double helix. The consequences of demethylation of thymidine residues are discussed in terms of changes in the minor groove width connected to variations in the flexibility of DNA and the intrinsic curvature associated with AT tracts. The study identifies the methyl group of thymine as an important molecular determinant controlling the width of the minor groove and/or the flexibility of the DNA.     

MspI, an isoschizomer of hpaII which cleaves both unmethylated and methylated hpaII sites.

The cleavage of DNA by restriction endonucleases HpaII and HapII is prevented by the presence of a 5-methyl group at the internal C residue of its recognition sequence CCGG. MspI, an isoschizomer of HpaII available from New England Biolabs, cleaves DNA irrespective of the presence of a methyl group at this position. This enzyme cleaves DNA from Haemophilus parainfluenzae and Haemophilus aphrophilus readily while HpaII and HapII cannot degrade these DNAs. Practically all HpaII sites in mammalian sperm DNA are also protected by methylation at the internal C position since HpaII and HapII barely cleave this DNA (average molecular weight 40 kb). MspI, however, cleaves the DNA to an average size of about 5 kb.     

The effects of DNA methylation by Hha I methylase on the cleavage reactions by Hae II, Aha II and Ban I endonucleases

The DNA methylated by Hha I methylase was resistant against cleavage of Hae II or Aha II endonuclease indicating that the methyl group of the C5 position of the inmost cytosine nucleotide interferes with the interaction between the enzyme and the hexameric recognition sequence. Considering that Hae II or Aha II methylase has not been isolated yet, the result explained above is a useful information for protecting a double stranded DNA from being cleaved by Hae II or Aha II endonuclease. In contrast to Hae II or Aha II endonuclease, Ban I endonuclease which also has Hha I sequence as its tetrameric core was able to cleave the same DNA normally. This result suggests that the C5 position of the inmost pyrimidine nucleotide is not an important contact point between Ban I endonuclease and its hexameric recognition sequence.     

Cleavage by restriction endonucleases MvaI and EcoRII of substrates modified in amino groups of heterocyclic bases

14-membered DNA-duplexes containing modified nucleoside residues, viz 4-N-methyldeoxycytidine (m4dC), 6-N-methyldeoxyadenosine (m6dA) or deoxyinosine (dI), in only one strand of the recognition site (CCA/TGG) of MvaI and EcoRII endonucleases were synthesized. It was shown that MvaI and EcoRII endonucleases interact with the exocyclic amino groups of the external dC residues and of the central dA residue of the recognition site exposed into the DNA major groove. These endonucleases which are isochizomers were found to possess different mechanisms of substrate cleavage. The ability of MvaI endonuclease to hydrolyze only unmodified strand of methylated duplexes allows one to make site-directed single-strand nicks in double-stranded DNA. Elimination of the 2-NH2-group located in the minor groove of DNA by substituting dI for dG had little, if any, effect on the hydrolytic activity of EcoRII and MvaI endonucleases.     

The influence of the 2-amino group of guanine on DNA conformation. Uranyl and DNase I probing of inosine/diaminopurine substituted DNA.

The conformation of the DNA helix is supposed to be a critical element in site-specific recognition by ligands both large and small. Groove width is one important measure of the conformation which varies with the local nucleotide composition, perhaps because of the presence of a purine 2-amino group on G.C base pairs. We have probed DNA with G-->inosine (I) and/or A-->diaminopurine (DAP) substitutions to see whether the location of the purine 2-amino group can indeed affect the minor groove width. At acid pH, the reactivity towards uranyl nitrate is modulated in substituted DNA quite differently from natural DNA, consistent with a marked narrowing of the minor groove at sites of G-->I substitution and widening at sites of A-->DAP replacement. The latter exerts the dominant effect. The expected changes in conformation are equally evident in the patterns of susceptibility to DNase I cleavage, but not to hydroxyl radical attack. Nuclease cleavage is maximal in normal and substituted DNA at regions of inferred moderate groove width which are generally little affected by the nucleotide substitutions. Consistent with models of sequence-dependent cutting by DNase I we find that the presence of a purine 2-amino group on the base pair three places upstream of the cutting site has a profound influence on the rate of reaction.     

Molecular determinants for DNA minor groove recognition: design of a bis-guanidinium derivative of ethidium that is highly selective for AT-rich DNA sequences

The phenanthridinium dye ethidium bromide is a prototypical DNA intercalating agent. For decades, this anti-trypanosomal agent has been known to intercalate into nucleic acids, with little preference for particular sequences. Only polydA-polydT tracts are relatively refractory to ethidium intercalation. In an effort to tune the sequence selectivity of known DNA binding agents, we report here the synthesis and detailed characterization of the mode of binding to DNA of a novel ethidium derivative possessing two guanidinium groups at positions 3 and 8. This compound, DB950, binds to DNA much more tightly than ethidium and exhibits distinct DNA-dependent absorption and fluorescence properties. The study of the mode of binding to DNA by means of circular and electric linear dichroism revealed that, unlike ethidium, DB950 forms minor groove complexes with AT sequences. Accurate quantification of binding affinities by surface plasmon resonance using A(n)T(n) hairpin oligomer indicated that the interaction of DB950 is over 10-50 times stronger than that of ethidium and comparable to that of the known minor groove binder furamidine. DB950 interacts weakly with GC sites by intercalation. DNase I footprinting experiments performed with different DNA fragments established that DB950 presents a pronounced selectivity for AT-rich sites, identical with that of furamidine. The replacement of the amino groups of ethidium with guanidinium groups has resulted in a marked gain of both affinity and sequence selectivity. DB950 provides protection against DNase I cleavage at AT-containing sites which frequently correspond to regions of enhanced cleavage in the presence of ethidium. Although DB950 maintains a planar phenanthridinium chromophore, the compound no longer intercalates at AT sites. The guanidinium groups of DB950, just like the amidinium group of furamidine (DB75), are the critical determinants for recognition of AT binding sites in DNA. The chemical modulation of the ethidium exocyclic amines is a profitable option to tune the nucleic acid recognition properties of phenylphenanthridinium dyes.     

The DNA-binding domain of human c-Abl tyrosine kinase promotes the interaction of a HMG chromosomal protein with DNA.

The biological activity of the c-Abl protein is linked to its tyrosine kinase and DNA-binding activities. The protein, which plays a major role in the cell cycle response to DNA damage, interacts preferentially with sequences containing an AAC motif and exhibits a higher affinity for bent or bendable DNA, as is the case with high mobility group (HMG) proteins. We have compared the DNA-binding characteristics of the DNA-binding domain of human c-Abl and the HMG-D protein from Drosophila melanogaster. c-Abl binds tightly to circular DNA molecules and potentiates the interaction of DNA with HMG-D. In addition, we used a series of DNA molecules containing modified bases to determine how the exocyclic groups of DNA influence the binding of the two proteins. Interfering with the 2-amino group of purines affects the binding of the two proteins similarly. Adding a 2-amino group to adenines restricts the access of the proteins to the minor groove, whereas deleting this bulky substituent from guanines facilitates the protein-DNA interaction. In contrast, c-Abl and HMG-D respond very differently to deletion or addition of the 5-methyl group of pyrimidine bases in the major groove. Adding a methyl group to cytosines favours the binding of c-Abl to DNA but inhibits the binding of HMG-D. Conversely, deleting the methyl group from thymines promotes the interaction of the DNA with HMG-D but diminishes its interaction with c-Abl. The enhanced binding of c-Abl to DNA containing 5-methylcytosine residues may result from an increased propensity of the double helix to denature locally coupled with a protein-induced reduction in the base stacking interaction. The results show that c-Abl has unique DNA-binding properties, quite different from those of HMG-D, and suggest an additional role for the protein kinase.     

Different effects on human topoisomerase I by minor groove and intercalated deoxyguanosine adducts derived from two polycyclic aromatic hydrocarbon diol epoxides at or near a normal cleavage site

Topoisomerase I (top1) relieves supercoiling in DNA by forming transient covalent cleavage complexes. These cleavage complexes can accumulate in the presence of damaged DNA or anticancer drugs that either intercalate or lie in the minor groove. Recently we reported that covalent diol epoxide (DE) adducts of benzo[a]pyrene (BaP) at the exocyclic amino group of G(+1) block cleavage at a preferred cleavage site ( approximately CTT-G(+1)G(+2)A approximately ) and cause accumulation of cleavage products at remote sites. In the present study, we have found that the 10S G(+2) adduct of BaP DE, which lies toward the scissile bond in the minor groove, blocks normal cleavage, whereas the 10R isomer, which orients away from this bond, allows normal cleavage but blocks religation. In contrast to BaP, the pair of benzo[c] phenanthrene (BcPh) DE adducts at G(+2), which intercalate from the minor groove either between G(+1)/G(+2) or between G(+2)/A, allow normal cleavage but block religation. Both intercalated BcPh DE adducts at G(+1) suppress normal cleavage, as do both groove bound BaP DE adducts at this position. These studies demonstrate that these DE adducts provide a novel set of tools to study DNA topoisomerases and emphasize the importance of contacts between the minor groove and top1's catalytic site.     

Repercussions of DNA tracking by the type IC restriction endonuclease EcoR124I on linear, circular and catenated substrates.

Type I restriction endonucleases such as EcoR124I cleave DNA at undefined loci, distant from their recognition sequences, by a mechanism that involves the enzyme tracking along the DNA between recognition and cleavage sites. This mechanism was examined on plasmids that carried recognition sites for EcoR124I and recombination sites for resolvase, the latter to create DNA catenanes. Supercoiled substrates with either one or two restriction sites were linearized by EcoR124I at similar rates, although the two-site molecule underwent further cleavage more readily than the one-site DNA. The catenane from the plasmid with one EcoR124I site, carrying the site on the smaller of the two rings, was cleaved by EcoR124I exclusively in the small ring, and this underwent multiple cleavage akin to the two-site plasmid. Linear substrates derived from the plasmids were cleaved by EcoR124I at very slow rates. The communication between recognition and cleavage sites therefore cannot stem from random looping. Instead, it must follow the DNA contour between the sites. On a circular DNA, the translocation of non-specific DNA past the specifically bound protein should increase negative supercoiling in one domain and decrease it in the other. The ensuing topological barrier may be the trigger for DNA cleavage.     

Unidirectional translocation from recognition site and a necessary interaction with DNA end for cleavage by Type III restriction enzyme

Type III restriction enzymes have been demonstrated to require two unmethylated asymmetric recognition sites oriented head-to-head to elicit double-strand break 25–27 bp downstream of one of the two sites. The proposed DNA cleavage mechanism involves ATP-dependent DNA translocation. The sequence context of the recognition site was suggested to influence the site of DNA cleavage by the enzyme. In this investigation, we demonstrate that the cleavage site of the R.EcoP15I restriction enzyme does not depend on the sequence context of the recognition site. Strikingly, this study demonstrates that the enzyme can cleave linear DNA having either recognition sites in the same orientation or a single recognition site. Cleavage occurs predominantly at a site proximal to the DNA end in the case of multiple site substrates. Such cleavage can be abolished by the binding of Lac repressor downstream (3′ side) but not upstream (5′ side) of the recognition site. Binding of HU protein has also been observed to interfere with R.EcoP15I cleavage activity. In accordance with a mechanism requiring two enzyme molecules cooperating to elicit double-strand break on DNA, our results convincingly demonstrate that the enzyme translocates on DNA in a 5′ to 3′ direction from its recognition site and indicate a switch in the direction of enzyme motion at the DNA ends. This study demonstrates a new facet in the mode of action of these restriction enzymes.     

DNA sequence recognition by the antitumor drug ditercalinium

The antitumor drug ditercalinium is a rare example of a noncovalent DNA-binding ligand that forms bisintercalation complexes via the major groove of the double helix. Previous structural studies have revealed that the two connected pyridocarbazolium chromophores intercalate into DNA with the positively charged bis(ethylpiperidinium) linking chain oriented to the wide groove side of the helix. Although the interaction of ditercalinium with short oligonucleotides containing 4-6 contiguous GC base pairs has been examined in detail by biophysical and theoretical approaches, the sequence preference for ditercalinium binding to long DNA fragments that offer a wide variety of binding sites has been investigated only superficially. Here we have investigated both sequence preferences and possible molecular determinants of selectivity in the binding of ditercalinium to DNA, primarily using methods based upon DNase I footprinting. A range of multisite DNA substrates, including several natural restriction fragments and different PCR-generated fragments containing unconventional bases (2,6-diaminopurine, inosine, uridine, 5-fluoro- and 5-methylcytosine, 7-deazaguanine, 7-deazaadenine, and N(7)-cyanoboranoguanine), have been employed to show that ditercalinium selectively recognizes certain GC-rich sequences in DNA and to identify some of the factors which affect its DNA-binding sequence selectivity. Specifically, the footprinting data have revealed that the 2-amino group on the purines or the 5-methyl group on the pyrimidines is not essential for the formation of ditercalinium-DNA complexes whereas the major groove-oriented N(7) of guanine does appear as a key element in the molecular recognition process. The loss of N(7) at guanines but not adenines is sufficient to practically abolish sequence-selective binding of ditercalinium to DNA. Thus, as expected for a major groove binding drug, the N(7) of guanine is normally required for effective complex formation with GC base pairs, but interestingly the substitution of the N(7) with a relatively bulky cyanoborane group does not markedly affect the sequence recognition process. Therefore, the hydrogen bond accepting capability at N(7) of guanines is not sufficient to explain the GC-selective drug-DNA association, and the implications of these findings are considered.     

DNase I susceptibility of bent DNA and its alteration by ditercalinium and distamycin

The bending of kinetoplast DNA from Crithidia fasciculata is thought to be related to the periodic distribution of AA or TT cluster sequences. The sensitivity to DNase I of the two strands of this DNA was analyzed at nucleotide resolution by sequencing gel electrophoresis. The effect on the DNase I cleavage pattern of two drugs, ditercalinium and distamycin, that are able to remove bending was analyzed. The same analysis was done on a pBR 322 DNA fragment of random sequence as a control. The periodic distribution of the AA or TT clusters in the bent DNA fragment was first analyzed by computing the autocorrelation function of the AA or TT clusters in the bent DNA fragment. It is shown that the AT tracts are on average 10.5 base pairs apart. This value is almost identical with that of the B-DNA helix pitch in solution [10.5 (Wang, 1979); 10.6 +/- 0.1 (Rhodes & Klug, 1980)]. To reveal the periodic pattern of DNase I cleavage on this bent DNA, alone or in presence of drugs, the cross correlation between the different bands obtained from DNAse I cleavage and the presence of AA or TT sequences was computed. This shows that GC and mixed sequences are the most sensitive regions. These data also suggest that there is a periodic fluctuation in the width of the minor groove in the bent fragment. Ditercalinium and distamycin alter the DNase I cutting pattern of the bent DNA fragment but in an inverse fashion.(ABSTRACT TRUNCATED AT 250 WORDS)     

Targeting topoisomerase I cleavage to specific sequences of DNA by triple helix-forming oligonucleotide conjugates. A comparison between a rebeccamycin derivative and camptothecin.

Topoisomerase I is an ubiquitous DNA cleaving enzyme and an important therapeutic target in cancer chemotherapy for the camptothecins as well as for indolocarbazole antibiotics such as rebeccamycin and its synthetic derivatives, which stabilize the cleaved DNA-topoisomerase I complex. The covalent linkage of a triple helixforming oligonucleotide to camptothecin or to the indolocarbazole derivative R-6 directs DNA cleavage by topoisomerase I to specific sequences. Sequence-specific recognition of DNA is achieved by the triple helix-forming oligonucleotide, which binds to the major groove of double-helical DNA and positions the drug at a specific site. The efficacy of topoisomerase I-induced DNA cleavage mediated by the rebeccamycin-conjugate and the camptothecin-conjugate was compared and related to the intrinsic potency of the isolated drugs.     

DNA curvature in native and modified EcoRI recognition sites and possible influence upon the endonuclease cleavage reaction

The ligation of a decadeoxynucleotide containing the EcoRI recognition site forms a series of multimers which appear to be curved based on observed anomalous gel migration in polyacrylamide gels. The degree of DNA curvature present in the recognition sequence, based upon the observed migration anomaly, can be altered by modifications to the purine functional groups at the 2- and 6-positions. Deletion of the guanine 2-amino group, occurring in the minor groove of the B-DNA helix, is most effective in increasing the observed DNA curvature. Conversely, the displacement of an amino group from the major groove to the minor groove eliminates curvature. DNA curvature is also modulated by the exocyclic group at the purine 6-position with decreasing curvature observed when changing the amino group to a carbonyl or proton substituent. Differences in the kinetic parameters characterizing the cleavage reaction by the endonuclease for many of the modified sequences are the result of modifications of functional groups in the major groove, which are likely to contact the endonuclease during catalysis. However, with two examples, significant decreases in the observed specificity constant (kcat/Km), characterizing the protein-nucleic acid interaction, cannot be easily explained in terms of such functional group contacts. It is more likely in these cases that the functional group modifications affect the efficiency of the endonuclease-DNA interaction by modulation of the structure of the double-stranded DNA helix. With both examples, modifications have been made to minor groove substituents. The extent of DNA curvature is increased significantly for one and decreased for the other, compared with that observed for the native recognition site. The results suggest that curvature of the DNA helix axis is an intrinsic property of the d(GAATTC) sequence which helps to optimize the protein-nucleic acid interactions observed for the EcoRI restriction endonuclease.     

Recognition sites of eukaryotic DNA topoisomerase I: DNA nucleotide sequencing analysis of topo I cleavage sites on SV40 DNA.

Eukaryotic DNA topoisomerase I introduces transient single-stranded breaks on double-stranded DNA and spontaneously breaks down single-stranded DNA. The cleavage sites on both single and double-stranded SV40 DNA have been determined by DNA sequencing. Consistent with other reports, the eukaryotic enzymes, in contrast to prokaryotic type I topoisomerases, links to the 3'-end of the cleaved DNA and generates a free 5'-hydroxyl end on the other half of the broken DNA strand. Both human and calf enzymes cleave SV40 DNA at the identical and specific sites. From 827 nucleotides sequenced, 68 cleavage sites were mapped. The majority of the cleavage sites were present on both double and single-stranded DNA at exactly the same nucleotide positions, suggesting that the DNA sequence is essential for enzyme recognition. By analyzing all the cleavage sequences, certain nucleotides are found to be less favored at the cleavage sites. There is a high probability to exclude G from positions -4, -2, -1 and +1, T from position -3, and A from position -1. These five positions (-4 to +1 oriented in the 5' to 3' direction) around the cleavage sites must interact intimately with topo I and thus are essential for enzyme recognition. One topo I cleavage site which shows atypical cleavage sequence maps in the middle of a palindromic sequence near the origin of SV40 DNA replication. It occurs only on single-stranded SV40 DNA, suggesting that the DNA hairpin can alter the cleavage specificity. The strongest cleavage site maps near the origin of SV40 DNA replication at nucleotide 31-32 and has a pentanucleotide sequence of 5'-TGACT-3'.     

A sequence-specific endonuclease (Xmn I) from Xanthomonas manihotis.

A type II restriction endonuclease Xmn I with a novel site specificity has been isolated from Xanthomonas manihotis. Xmn I does not cleave SV40 DNA, but cleaves phi X174 DNA into three fragments, which constitute 76.61%, 18.08% and 5.31% of the total length of 5386 base pairs, and cleaves pBR322 DNA into two fragments of 55.71% and 44.29% of the entire 4362 base pairs. The nucleotide sequences around the cleavage sites made by Xmn I are not exactly homologous, but they have a common sequence of 5' GAANNNNTTC 3' according to a simple computer program analysis on nucleotide sequences of phi X174 DNA, pBR322 DNA and SV40 DNA. The results suggest that the cleavage site of Xmn I is located within its recognition sequence of 5' GAANNNNTTC 3'.     

DNA cleavage by type III restriction-modification enzyme EcoP15I is independent of spacer distance between two head to head oriented recognition sites

The type III restriction-modification enzyme EcoP15I requires the interaction of two unmethylated, inversely oriented recognition sites 5'-CAGCAG in head to head configuration to allow an efficient DNA cleavage. It has been hypothesized that two convergent DNA-translocating enzyme-substrate complexes interact to form the active cleavage complex and that translocation is driven by ATP hydrolysis. Using a half-automated, fluorescence-based detection method, we investigated how the distance between two inversely oriented recognition sites affects DNA cleavage efficiency. We determined that EcoP15I cleaves DNA efficiently even for two adjacent head to head or tail to tail oriented target sites. Hence, DNA translocation appears not to be required for initiating DNA cleavage in these cases. Furthermore, we report here that EcoP15I is able to cleave single-site substrates. When we analyzed the interaction of EcoP15I with DNA substrates containing adjacent target sites in the presence of non-hydrolyzable ATP analogues, we found that cleavage depended on the hydrolysis of ATP. Moreover, we show that cleavage occurs at only one of the two possible cleavage positions of an interacting pair of target sequences. When EcoP15I bound to a DNA substrate containing one recognition site in the absence of ATP, we observed a 36 nucleotide DNaseI-footprint that is asymmetric on both strands. All of our footprinting experiments showed that the enzyme did not cover the region around the cleavage site. Analyzing a DNA fragment with two head to head oriented recognition sites, EcoP15I protected 27-33 nucleotides around the recognition sequence, including an additional region of 26 bp between both cleavage sites. For all DNA substrates examined, the presence of ATP caused altered footprinting patterns. We assume that the altered patterns are most likely due to a conformational change of the enzyme. Overall, our data further refine the tracking-collision model for type III restriction enzymes.     

Cleavage of single strand oligonucleotides and bacteriophage phi X174 DNA by Msp I endonuclease

Type II restriction endonucleases cleave duplex DNA at nucleotide sequences displaying 2-fold symmetry. Our data show that Msp I cleaves single strand oligonucleotides, d(G-A-A-C-C-G-G-A-G-A) and d(T-C-T-C-C-G-G-T-T) at 4 degrees, 25 degrees, and 37 degrees C reaction temperatures. The rate of cleavage of d(G-A-A-C-C-G-G-A-G-A) is several-fold faster than that of d(T-C-T-C-C-G-G-T-T). Single strand phi X174 DNA is also, cleaved by Msp I endonuclease giving well defined fragments. 5'-Nucleotide analysis of the fragments generated from single strand and replicating form DNA suggest that cleavage occurs at the recognition sequence d(C-C-G-G). The data show that Msp I endonuclease cleaves single strand oligonucleotides and prefers a recognition sequence surrounded by purine nucleotides. A general model for endonuclease cleavage of single strand and duplex DNA is presented.     

Degradation of structurally modified DNAs by bleomycin group antibiotics

Bleomycin-mediated DNA strand scission has been shown to be diminished at certain sequences in proximity to 5-methylcytidines. We have investigated the molecular basis of this observed diminution using selective bleomycin (BLM) modifications at the C-terminus. Of the four different bleomycin congeners investigated, only bleomycin A2 and bleomycin BAPP were substantially affected by cytidine methylation. We have also examined the effect of other DNA modifications on bleomycin-mediated strand scission. Methylation at the N6 position of adenosine resulted in diminution of DNA cleavage by all four bleomycin congeners. The presence of bulky 5-(glucosyloxy)methyl groups in the major groove of T4 DNA had little effect on the efficiency of DNA strand scission mediated by bleomycin A2 or B2, suggesting the absence of important steric interactions between Fe(II).BLM and DNA in the major groove. In contrast, DNA cleavage mediated by bleomycin congeners was very sensitive to a major DNA conformational change, the B----Z transition. Salt and MgCl2 titrations of the DNA copolymers poly(dG-dC).poly(dG-dC) and poly(dG-MedC).poly(dG-MedC) demonstrated that bleomycin A2 and B2 did not cleave Z-DNA efficiently. In addition, circular dichroism titrations of these copolymers revealed that both bleomycin congeners increased the cation concentration necessary to induce the B----Z transition, implying that bleomycin preferentially binds to and stabilizes B-form DNA. These results are consistent with a model in which cytidine methylation at appropriate sequences of DNA is sufficient to induce subtle conformational changes that render the helix unreceptive to cleavage by some bleomycin congeners.     

Stabilization of Z-DNA by demethylation of thymine bases: 1.3-A single-crystal structure of d(m5CGUAm5CG)

Methylation of cytosine bases at the C5 position has been known to stabilize Z-DNA. We had previously predicted from calculations of solvent-accessible surfaces that the methyl group at the same position of thymine has a destabilizing effect on Z-DNA. In the current studies, the sequence d(m5CGUAm5CG) has been crystallized and its structure solved as Z-DNA to 1.3-A resolution. A well-defined octahedral hexaaquomagnesium complex was observed to bridge the O4 oxygens of the adjacent uridine bases at the major groove surface, and four well-structured water molecules were found in the minor groove crevice at the d(UA) dinucleotide. These solvent interactions were not observed in the previously published Z-DNA structure of the analogous d(m5CGTAm5CG) sequence. A comparison of the thymine and uridine structures supports our prediction that demethylation of thymine bases helps to stabilize Z-DNA. A comparison of this d(UA)-containing Z-DNA structure with the analogous d(TA) structure shows that access of the O4 position is hindered by the C5 methyl of thymine due to steric and hydrophobic inhibition. In the absence of the methyl group, a magnesium-water complex binds to and slightly affects the structure of the Z-DNA major groove surface. This perturbation of the solvent structure at the major groove surface is translated into a much larger 1.41-A widening of the minor groove crevice, thereby allowing the specific binding of two water molecules at well-defined sites of each internal d(UA) base pair. Possible mechanisms by which modifications at the major groove surface of Z-DNA can affect the solvent properties of the minor groove crevice are discussed.