Synthesis and characterization of triphenylphosphine stabilized silver α,β-unsaturated carboxylate: Crystal structure of [Ag(O2CCHC(CH3)2)(PPh3)2]

A series of triphenylphosphine coordinated silver α,β-unsaturated carboxylates of type [Ag(O₂CR)(PPh₃)_n: n = 1, R = CH₃CHCH (2a), (CH₃)₂CCH (2b), CH₃CH₂CHCH (2c), CH₃CH₂CH₂CHCH (2d), PhCHCH (2e), CH₂CH (2f); n = 2, CH₃CHCH (3a), (CH₃)₂CCH (3b), CH₃CH₂CHCH (3c), CH₃CH₂CH₂CHCH (3d)] were prepared by reaction of relative silver carboxylates (1a-1f) with triphenylphosphine in chloroform. These complexes were obtained in high yields and characterized by elemental analysis, ¹H NMR, ¹³C NMR, ³¹P NMR and IR spectroscopy. Thermal stability of the complexes has been determined by TG analysis. The molecular structure of [Ag((O₂CCHC(CH₃)₂))(PPh₃)₂] (3b) shows that the senecioato ligand is chelated with silver atom and generate, a distorted tetrahedron.     

Modification of aminoallenylidene complexes of chromium via exchange of the C3-bound amino group

The aminoallenylidene(pentacarbonyl)chromium complexes [(CO)₅CrCCC(NR¹R²)Ph] (1a-c) react with dimethylamine by addition of the amine to the C1C2 bond of the allenylidene ligand to give alkenyl(amino)carbene complexes [(CO)₅CrC(NMe₂)CHC(NR¹R²)Ph] (2a-c) (R¹ = Me: R² = Me (a), Ph (b); R¹ = Et: R² = Ph (c)). In contrast, addition of a large excess (usually 20 equivalents) of ammonia or primary amines, H₂NR, to solutions of [(CO)₅CrCCC(NMe₂)Ph] (1a) affords the aminoallenylidene complexes [(CO)₅CrCCC(NHR)Ph] (1d-w) in which the dimethylamino group is replaced by NH₂ or NHR, respectively. In addition to simple amines such as methylamine, butylamine, and aniline, amines carrying a functional group (allylamine, propargylamine) and amino acid esters as well as amino terpenes and amino sugars can be used to displace the NMe₂ substituent. Usually the Z isomer (with respect to the partial C3-N double bond) is formed exclusively. Products derived from addition of H₂NR to the C1C2 bond of 1a are not observed. The amino group in 1d-w is rapidly deprotonated by excess of amine to form iminium alkynyl chromates [1d-w]⁻, thus protecting 1d-w from addition of free amine to either C3 or across the C1C2 bond. The iminium alkynyl chromates are readily reprotonated by acids or by chromatography on wet SiO₂ to reform 1d-w.     

Organometallic π-tweezers incorporating pyrazine- and pyridine-based bridging units

Pyrazine- and pyridine-based π-conjugated σ-donor molecules, such as 4,4′-bipyridine, 1,2-di(4-pyridyl)ethylene, 3,5-dipyridyl-1,2,4-triazole, N,N′-bis(4-pyridylmethylidene)benzene-1,4-diamine, 2,5-di(pyridylmethylidene)cyclopentanone, 2,6-di(4-pyridylmethylidene)cyclohexanone (LL, 2a-2g) can successfully be used to span heterobimetallic π-tweezer units of the type [{[Ti](μ-σ,π-CCSiMe₃)₂}M]⁺ ([Ti] = (η⁵-C₅H₄SiMe₃)₂Ti; M = Cu, Ag). The thus accessible di-cationic species [{[Ti](μ-σ,π-CCSiMe₃)₂}MLLM{(Me₃SiCC-μ-σ,π)₂[Ti]}]²⁺ (4), which are formed via the formation of [{[Ti](μ-σ,π-CCSiMe₃)₂}MLL]⁺ (3) complexes, can be isolated in yields between 66% and 99%.However, when C₅H₄NCHCHC₆H₄CHCHNC₅H₄ (5a) and C₅H₄NCHNC₆H₄CHCHNC₅H₄ (5b), respectively, are reacted with {[Ti](μ-σ,π-CCSiMe₃)₂}AgBF₄(1c) in a 1:1 molar ratio, then the silver(I) ion is released from the organometallic π-tweezer 1c and coordination polymers [AgBF₄ · 5a]_n (6a) and [AgBF₄ · 5b]_n (6b) along with [Ti](CCSiMe₃)₂ (7) are formed in quantitative yield.     

Organometallic complexes for nonlinear optics. Part 36. Quadratic and cubic optical nonlinearities of 4-fluorophenylethynyl- and 4-nitro-(E)-stilbenylethynylruthenium complexes

The complexes trans-[Ru(CC-4-C₆H₄F)X(dppe)₂] [X = Cl (1), CCPh (2), CC-4-C₆H₄NO₂ (3)], trans-[Ru{CC-4-C₆H₄-(E)-CHCH-4-C₆H₄NO₂}X(dppe)₂] [X = CCPh (4), CC-4-C₆H₄CCPh (5)], and [C₆H₃-1,3-{CC-trans-[RuCl(dppe)₂]}₂-5-(CC-4-C₆H₄F)] (6) have been synthesized and the identity of 1 confirmed by a single-crystal X-ray diffraction study. Cyclic voltammetry reveals a metal-centered oxidation, the potential of which is largely invariant on alkynyl ligand replacement across the series 1-5; the diruthenium complex 6 shows two oxidation processes, consistent with weakly interacting metal centers. Hyper-Rayleigh scattering (HRS) studies at 1064 nm using ns pulses suggest quadratic nonlinearities for 3-5 that are amongst the largest thus far for organometallic complexes, a trend maintained with the two-level-corrected data. HRS studies at 800 nm using fs pulses and amplitude modulation to remove multi-photon fluorescence contributions reveal significant fluorescence-free nonlinearities for 3-5; the frequency-independent nonlinearities calculated from the 800 nm results are suggestive of fluorescence contributions to the 1064 nm data. Z-scan studies at 820 nm reveal cubic nonlinearities that increase with the size of the π-system, although error margins are significant.     

Synthesis and reactivity of five- and six-coordinate hydrido(vinyl) iridium(III) complexes

The reaction of the dihydrido iridium(III) precursor [IrH₂(Cl)(PiPr₃)₂] (5) with internal alkynes RCC(CO₂Me) (R = Me, CO₂Me) afforded the five-coordinate hydrido(vinyl) complexes [IrH(Cl){(E)-C(R)CH(CO₂Me)}(PiPr₃)₂] (6, 7), via insertion of the alkyne into one of the IrH bonds. Compounds 6 and 7 are also accessible by careful hydrogenation of the alkyne iridium(I) derivatives trans-[IrCl{RCC(CO₂Me)}(PiPr₃)₂] (9, 10), the latter being prepared from in situ generated trans-[IrCl(C₈H₁₄)(PiPr₃)₂] and RCC(CO₂Me). UV irradiation of 6 (R = CO₂Me) led to the formation of the isomer [IrH(Cl){κ²(C,O)-C(CO₂Me)CHC(OMe)O}(PiPr₃)₂] (3) having the vinyl ligand coordinated in a bidentate fashion. While 6 reacted with acetonitrile and CO to afford the six-coordinate iridium(III) compounds [IrH(Cl){(E)-C(CO₂Me)CH(CO₂Me)}(L′)(PiPr₃)₂] (11, 12), treatment of 6 with LiC₅H₅ gave the half-sandwich-type complex [(η⁵-C₅H₅)IrH{(E)-C(CO₂Me)CH(CO₂Me)}(PiPr₃)] (13) by, the loss of one PiPr₃. The reaction of 3 with CO under pressure resulted in the formation of [IrH(Cl){(Z)-C(CO₂Me)CH(CO₂Me)}(CO)(PiPr₃)₂] (14) in which, in contrast to the stereoisomer 12, the two CO₂Me substituents are trans disposed.     

Synthesis and structures of bimetallic silicon-containing imido alkylidene complexes of molybdenum Me2Si[CHMo(NAr)(ORF3)2]2 and PhVinSi[CHMo(NAr)(ORF3)2]2

Bimetallic alkylidene complexes of molybdenum (R_F3O)₂(ArN)MoCH-SiMe₂-CHMo(NAr)(OR_F3)₂ (1) and (R_F3O)₂(ArN)MoCH-SiPhVin-CHMo(NAr)(OR_F3)₂ (2) (Ar = 2,6-C₆H₃; R_F3 = CMe₂CF₃) have been prepared by the reactions of vinyl silicon reagents Me₂Si(CHCH₂)₂ and PhSi(CHCH₂)₃ with known alkylidene compound PhMe₂C-CHMo(NAr)(OR_F3)₂. Complexes 1 and 2 were structurally characterized. Ring opening metathesis polymerization (ROMP) of cyclooctene using compounds 1 and 2 as initiators led to the formation of high molecular weight polyoctenamers with predominant trans-units content in the case of 1 and predominant cis-units content in the case of 2.     

Novel stable five-coordinate diorgano cobalt(III) complexes: Formation, structure, and reaction with carbon monoxide

A series of new five-coordinate acyl vinyl cobalt(III) complexes Co{η¹-C(CCPh)CHPh}[C(O)CCO] L₂(L = PMe₃) (6-10) were prepared via formal insertion of diphenylbutadiyne into Co-H function of mer-octahedral hydrido-acyl(phenolato)-cobalt(III) complexes. The complexes are diamagnetic. One square pyramidal structure of complex 6 was confirmed by X-ray diffraction analysis. These complexes are stable in solid state. In solution, six-coordinate acyl vinyl carbonyl cobalt(III) complex 11 is approved through the reaction of complex 7 with CO and the structure of complex 11 was determined by X-ray method.     

A new cumulene diiron complex related to the active site of Fe-only hydrogenases and its phosphine substituted derivatives: synthesis, electrochemistry and structural characterization

A new cumulene diiron complex related to the Fe-only hydrogenase active site [(μ-SCH₂C(S)CCH₂)Fe₂(CO)₆] (1) was obtained by treatment of (μ-LiS)₂Fe₂(CO)₆ with excess 1,4-dichloro-2-butyne. By controllable CO displacement of 1 with PPh₃ and bis(diphenylphosphino)methane (dppm), mono- and di-substituted complexes, namely [(μ-SCH₂C(S)CCH₂)Fe₂(CO)₅L] (2: L = PPh₃; 3: L = dppm) and [(μ-SCH₂C(S)CCH₂)Fe₂(CO)₄L₂] (4: L = PPh₃; 5: L = dppm) could be prepared in moderate yields. Treatment of 1 with bis(diphenylphosphino)ethane (dppe) afforded a double butterfly complex [(μ-SCH₂C(S)CCH₂)Fe₂(CO)₅]₂(μ-dppe) (7). With dppm in refluxing toluene, a dppm-bridged complex [(μ-SCH₂C(S)CCH₂)Fe₂(CO)₄(μ-dppm)] (6) was obtained. These model complexes were characterized by IR, ¹H, ³¹P NMR spectra and the molecular structures of 1, 2 and 5-7 were determined by single crystal X-ray analyses. The electrochemistry of 1-3 was studied and the electrocatalytic property of 1 was investigated for proton reduction in the presence of HOAc.     

Platinum(II) halide complexes of PPh2(CFCF2) and PPh2(CClCF2). The synthesis and crystal structure of [PtI(μ-I){PPh2(CXCF2)}]2, (X = F, Cl); the first crystallographically characterised iodide-bridged platinum(II) phosphine dimers

The reactions of the fluorovinyl-substituted phosphines PPh₂(CFCF₂) and PPh₂(CClCF₂), with K₂PtX₄ (X = Br, I) have been investigated. The resulting complexes have been characterized by a combination of ¹⁹F and ³¹P{¹H} NMR, IR and Raman spectroscopy. The reactions of these phosphines with K₂PtBr₄ yield the monomeric complexes cis-[PtBr₂{PPh₂(CFCF₂)}₂] (1) and trans-[PtBr₂{PPh₂(CClCF₂)}₂] (2), respectively, whilst the reactions with K₂PtI₄ yield both the monomeric species trans-[PtI₂{PPh₂(CXCF₂)}₂], {X = F (3), Cl (4)}, and the dimeric species [PtI(μ-I){PPh₂(CXCF₂)}]₂, {X = F (5), Cl (6)}. The dimers 5 and 6 represent the first crystallographically characterised platinum(II) iodide-bridged phosphine complexes, and both adopt the symmetric-trans structure.     

Synthesis and structural diversity of 2-pyridylmethylideneamine complexes of zinc(II) chloride

The addition reactions of zinc(II) chloride to N-substituted pyridine-2-carbaldimines [Py-CHNR, R = Me (1a), Ph (1b), Bz (1c), allyl (1d)] lead to different complexes dependent on the N-bound substituent R. The 1:1 complexes show molecular structures of the type [(Py-CHNR)ZnCl₂] for R = methyl (2a), phenyl (2b), and allyl (2d) with a distorted tetrahedral environment for the zinc atom. The zinc complex with the N-methylated pyridine-2-carbaldimine also forms a dimer of the type [(Py-CHNR)ZnCl₂]₂ (2a)₂ with a square pyramidal coordination sphere of zinc. A 3:2 stoichiometry is observed for R = benzyl and an ion pair of the type [Zn(Py-CHNR)₃]²⁺ [ZnCl₄]²⁻ (2c) is found in the solid state.     

Ferrocenyl-substituted allenylidene complexes of chromium, molybdenum and tungsten: Synthesis, structure and reactivity

Bis(ferrocenyl)-substituted allenylidene complexes, [(CO)₅MCCCFc₂] (1a-c, Fc = (C₅H₄)Fe(C₅H₅), M = Cr (a), Mo (b), W (c)) were obtained by sequential reaction of Fc₂CO with Me₃Si-CCH, KF/MeOH, n-BuLi, and [(CO)₅M(THF)]. For the synthesis of related mono(ferrocenyl)allenylidene chromium complexes, [(CO)₅CrCCC(Fc)R] (R = Ph, NMe₂), three different routes were developed: (a) reaction of the deprotonated propargylic alcohol HCCC(Fc)(Ph)OH with [(CO)₅Cr(THF)] followed by desoxygenation with Cl₂CO, (b) Lewis acid induced alcohol elimination from alkenyl(alkoxy)carbene complexes, [(CO)₅CrC(OR)CHC(NMe₂)Fc], and (c) replacement of OMe in [(CO)₅CrCCC(OMe)NMe₂] by Fc. Complex 1a was also formed when the mono(ferrocenyl)allenylidene complex [(CO)₅CrCCC(Fc)NMe₂] was treated first with Li[Fc] and the resulting adduct then with SiO₂. The replacement route (c) was also applied to the synthesis of an allenylidene complex (7a) with a CC spacer in between the ferrocenyl unit and C_γ of the allenylidene ligand, [(CO)₅CrCCC(NMe₂)-CCFc]. The related complex containing a CHCH spacer (9a) was prepared by condensation of [(CO)₅CrCCC(Me)NMe₂] with formylferrocene in the presence of NEt₃. The bis(ferrocenyl)-substituted allenylidene complexes 1a-c added HNMe₂ across the C_α-C_β bond to give alkenyl(dimethylamino)carbene complexes and reacted with diethylaminopropyne by regioselective insertion of the CC bond into the C_β-C_γ bond to afford alkenyl(diethylamino)allenylidene complexes, [(CO)₅MCCC(NEt₂)CMeCFc₂]. The structures of 5a, 7a, and 9a were established by X-ray diffraction studies.     

Addition of protic nucleophiles to alkynyl methoxy carbene ligands in diiron complexes

Different protic nucleophiles (i.e.Ph₂CNH, PhSH, MeCO₂H, PhOH) can be added to the CC bond of [Fe₂{μ-CN(Me)(Xyl)}(μ-CO)(CO){C(OMe)CCTol}(Cp)₂][SO₃CF₃] (1), affording new diiron alkenyl methoxy carbene complexes.The additions of Ph₂CNH and MeCO₂H are regio and stereoselective, resulting in the formation of the 5-aza-1-metalla-1,3,5-hexatriene [Fe₂{μ-CN(Me)(Xyl)}(μ-CO)(CO){C_α(OMe)C_βHC_γ(Tol)(NCPh₂)}(Cp)₂][SO₃CF₃] (2), and the 2-(acyloxy)alkenyl methoxy carbene complex [Fe₂{μ-CN(Me)(Xyl)}(μ-CO)(CO){C_α(OMe)C_βHC_γ(Tol)OC(O)Me)}(Cp)₂][CF₃SO₃] (5); the E isomer of the former and the Z of the latter are formed exclusively.Conversely, the addition of PhSH is regio but not stereoselective; thus, both the E and Z isomers of [Fe₂{μ-CN(Me)(Xyl)}(μ-CO)(CO){C_α(OMe)C_βHC_γ(Tol)(SPh)}(Cp)₂][SO₃CF₃] (3) are formed in comparable amounts.Compounds 3 and 5 are demethylated upon chromatography through Al₂O₃, resulting in the formation of the acyl complexes [Fe₂{μ-CN(Me)(Xyl)}(μ-CO)(CO){C_α(O)C_βHC_γ(Tol)(SPh)}(Cp)₂] (4) and [Fe₂{μ-CN(Me)(Xyl)}(μ-CO)(CO){C_α(O)C_βHC_γ(Tol)OC(O)Me}(Cp)₂] (6), respectively, both with a Z configured C_βC_γ bond.Finally, the reaction of 1 with PhOH proceeds only in the presence of an excess of Et₃N affording the 2-(alkoxy)alkenyl acyl complex [Fe₂{μ-CN(Me)(Xyl)}(μ- CO)(CO){C_α(O)C_βHC_γ(Tol)(OPh)}(Cp)₂] (7). The crystal structures of 4 · CH₂Cl₂ and 7 · 0.5CH₂Cl₂ have been determined by X-ray diffraction experiments.     

Unusual hexamers and infinite water chains trapped in the complexes of 2-(4-pyridyl)benzimidazole

Unusual hexamers and water chains have been observed in the complexes of (HPyBIm)⁺(Hterephate)⁻(PyBIm) · 4H₂O (1) and [Ag₂(PyBIm)₂(μ₂-SO₄)] · 4H₂O (2), respectively (PyBIm = 2-(4-pyridyl)benzimidazole). In 1, a chair-shaped hexamer (not water hexamer) formed by the water molecules and carboxylate groups as well as one-dimensional water chain are being observed. While in 2, a water hexamer-shaped as parallelogram is obtained; more interestingly, the parallelogram-shaped water hexamers are further aggregated into tape like infinite water chain via hydrogen-bonding interactions.     

Reactivity of the N-heterocyclic carbene complexes [Ru(IMes)2(CO)HX] (X = OH, Cl) with alkynes

Treatment of the 16-electron hydroxy hydride complex [Ru(IMes)₂(CO)H(OH)] (1, IMes = 1,3-bis-(2,4,6-trimethylphenyl)imidazol-2-ylidene) with HCCR affords the alkynyl species [Ru(IMes)₂(CO)H(CCR)] (R = Ph 3, SiMe₃, 4) and [Ru(IMes)₂(CO)(CCR)₂] (R = Ph, 5). Deuterium labelling studies show that the mono-alkynyl complexes are formed via hydrogen transfer from a coordinated alkyne ligand to Ru-OH, while bis-alkynyl formation is proposed to take place through hydrogen transfer to Ru-H. Both 3 and 5 readily coordinate CO to give the corresponding dicarbonyl species 6 and 7. Addition of HCCPh to the hydride chloride precursor [Ru(IMes)₂(CO)HCl] (2) results in a different reaction pathway involving alkyne insertion into the Ru-H bond to yield the alkenyl chloride complex [Ru(IMes)₂(CO)(CHCHPh)Cl] 8. Complexes 3-8 have been structurally characterised by X-ray crystallography.     

A fluorene-based diphosphinite ligand, its Ni, Pd, Pt, Fe, Co and Zn complexes and the first structurally characterized diphosphinate metal chelates

The diphosphinite ligand 9,9-(Ph₂POCH₂)₂-fluorene (1) was reacted with group 10 metal dichlorides to form chelate complexes of formula [MCl₂(1)] (MNi, 2; MPd, 3; MPt, 4) showing 8-membered metallocycles. Chloride abstraction from 3 with AgOTf afforded the dinuclear complex [M(μ-Cl)Pd(1)]₂(OTf)₂ (5), in which the ligand adopts a different conformation with respect of 3. In 5, the fluorene moiety and the phenyl groups display stabilizing interactions with the anion which is located close to the metal centre. With Fe(II), Co(II) and Zn(II) chlorides, the non-isolated intermediates [MCl₂(1)] readily undergo oxidation to [MCl₂(1_ox)] (MFe, 6; MCo, 7; MZn, 8; 1_ox = 9,9-(Ph₂P(O)OCH₂)₂-fluorene) in which the diphosphinate ligand and the metal centre form 10-membered metallocycles. Complexes 6-8 are the first examples of structurally characterized diphosphinate metal chelates. The Zn(II) diphosphinite complex [ZnCl₂(1)] (9) could be observed by NMR spectroscopy, along with the mixed phosphinite-phosphinate, mono-oxidized complex which is an intermediate in the formation of 8. Complex [ZnCl₂(9.9-fluorene-dimethanol)(Ph₂P(O)H)] (10) was also observed as hydrolysis product of 9. The X-ray molecular structures of 2, 3, 5.2OTf, 6, 7, 8 and 10 are reported.     

Ketimine synthesis in the coordination sphere of thallium (I)

[AuTl(C₆F₅)₂(en)] (en = ethylenediamine) reacts with cyclic ketones as cyclopentanone (Cy⁵O), cyclohexanone (Cy⁶O) or cycloheptanone (Cy⁷O) in 1:1 or 1:2 molar ratio leading to products of stoichiometry [AuTl(C₆F₅)₂{Cy^xN(CH₂)₂NH₂}] (x = 5 1, 6 2 or 7 3), or [AuTl(C₆F₅)₂{Cy^xN(CH₂)₂NCy^x}] (x = 5 4, 6 5 or 7 6). Addition of ethylenediamine to the ketimine complexes in chloroform regenerates [AuTl(C₆F₅)₂(en)], the starting material, and the free ketimines, as their NMR and mass spectra evidenced. The ketimine complexes display luminescence in solid state at room temperature and at 77 K at higher wavelengths than the diamine starting product (505 nm). The excited states responsible for this behaviour are assigned to orbitals due to the gold-thallium interactions.     

Cu(II) and Ni(II) complexes based on monofunctional and dendrimeric pyrrole-imine ligands: Applications in catalytic liquid phase hydroxylation of phenol

New bis(pyrrolide-imine) copper(II) and Ni(II) complexes C1 and C2 [{ (C₃H₇)-NCH (C₄H₃N)}₂Cu], [{(C₃H₇)-NCH-(C₄H₃N)}₂Ni] as well as the bimetallic dendrimeric (pyrrolide-imine) copper(II) and nickel(II) complexes C3 and C4, [DAB-{(NCH-C₄H₃N)₄}Cu₂], [DAB-{(NCH-C₄H₃N)₄}Ni₂] (DAB = G1-polypropyleneimine dendrimer with a diaminobutane core) were prepared in good yields. The structure and composition of the complexes were confirmed by a combination of analytical techniques. These complexes were investigated as catalysts in the hydroxylation of phenol in aqueous media in the pH range of 2-6 for the mononuclear complexes, C1 and C2 while the bimetallic systems, C3 and C4 were studied over the pH range 2-8. H₂O₂ was used as the oxidant under an oxygen atmosphere. The copper systems generally showed higher activity as compared to their nickel analogues. Catechol was the predominant product followed by hydroquinone with small amounts of para-benzoquinone. The nickel complexes showed better selectivity for catechol. The pH of the reaction medium also plays a role in both activity and selectivity with pH 3 being optimal for activity and pH 6 for selectivity to catechol.     

Co and Cu complexes of reduced Schiff bases: Generation of phenoxyl radical species

The three complexes [Co^IIIL¹Cl] (1), [Co^IIIL²]⁺·ClO₄⁻ (2⁺·ClO₄⁻), and [Cu^IIH₂L²]²⁺·2ClO₄⁻ (H₂3²⁺·2ClO₄⁻) [where H₂L¹ = N,N′-dimethyl-N,N′-bis(2-hydroxy-3,5-di-tert-butylbenzyl)ethylenediamine, H₂L² = N,N′-bis(2-pyridylmethyl)-N,N′-bis(2-hydroxy-3,5-di-tert-butylbenzyl)ethylenediamine] have been prepared. The bis-phenolate and bis-phenol complexes, 2⁺ and H₂3²⁺ respectively, have been characterized by X-ray diffraction, showing a metal ion within an elongated octahedral geometry. 1-2 exhibit in their cyclic voltammetry curves two anodic reversible waves attributed to the successive oxidation of the phenolates into phenoxyl radicals. The cobalt radical species (1)⁺, (2)²⁺, and (2)³⁺ have been characterized by combined UV-Vis and EPR spectroscopies. In the presence of one equivalent of base, one phenolic arm of H₂3²⁺ is deprotonated and coordinates the metal. The resulting complex (H3⁺) exhibits a single reversible redox wave at ca. 0.3 V. The electrochemically generated oxidized species is EPR silent and exhibits the typical features of a radical compound, with absorption bands at 411 and 650 nm. The fully deprotonated complex 3 is obtained by addition of two equivalents of nBu₄N⁺OH⁻ to H₂3²⁺. It exhibits a new redox wave at a lower potential (−0.16 V), in addition to the wave at ca. 0.3 V. We assigned the former to the one-electron oxidation of the uncoordinated phenolate into an unstable phenoxyl radical.     

Synthesis and non-linear optical properties of (η-pentaphenylcyclopentadienyl)dicarbonylruthenium(II) σ-alkenyl complexes

The complexes [Ru{(Z)-HCCHPh}(CO)₂(η⁵-C₅Ph₅)] (1) and [Ru{(Z)-HCCHC₆H₄NO₂}(CO)₂(η⁵-C₅Ph₅)] (2) have been synthesized and their identity confirmed by single-crystal X-ray diffraction studies. Reaction of 2 with PMe₂Ph and Me₃NO in tetrahydrofuran afforded [Ru{(Z)-HCCHC₆H₄NO₂}(CO)(PMe₂Ph)(η⁵-C₅Ph₅)] (3). Cyclic voltammetry confirms the expected increase in ease of oxidation on proceeding from 2 to 1 and from 2 to 3. Hyper-Rayleigh scattering studies at 1064 nm reveal a dramatic increase in quadratic non-linearity on co-ligand replacement of CO by PMe₂Ph, in proceeding from 2 to 3. Z-scan studies at 800 nm are consistent with significant contribution from two-photon states, and with an increase in γ_real on co-ligand replacement of CO by PMe₂Ph in proceeding from 2 to 3.     

Activity of homobimetallic ruthenium alkylidene complexes on intermolecular [2+2+2] cyclotrimerisation reactions of terminal alkynes

The activity of homobimetallic ruthenium alkylidene complexes, [(p-cymene)Ru(Cl)(μ-Cl)₂Ru(Cl)(CHPh)(PCy₃)] [Ru-I] and [(p-cymene)Ru(Cl)(μ-Cl)₂Ru(Cl)(CHPh)(IPr)] [Ru-II], on intermolecular [2+2+2] cyclotrimerisation reactions of monoynes has been investigated for the first time. It was found that these complexes can catalyse the chemo and regioselective cyclotrimerisation reactions of alkynes at both 25 and 50 °C in polar, aprotic solvents. The catalytic activity of [Ru-I] and [Ru-II] was compared to other well-known ruthenium catalysts such as Grubbs first generation catalyst [RuCl₂(CHPh)(PCy₃)₂] [Ru-III], [RuCl(μ-Cl)(p-cymene)]₂ [Ru-IV] and [RuCl₂(p-cymene)PCy₃] [Ru-V] complexes. To examine the effect of the steric hinderance of substrates on the regioselectivity of the reaction, a series of sterically hindered silicon containing alkynes (1a, 1b, 1c) were used. It was shown that the isomeric product distribution of the reaction shifts from 1,2,4-trisubstituted arenes to 1,3,5-trisubstituted arenes as the steric hinderance on the substrates increases. These homobimetallic ruthenium alkylidene complexes also catalysed regio- and chemo-selective cross-cyclotrimerisation reactions between silicon-containing alkynes (1a, 1b, 1c) and aliphatic alkynes (1d-g).