共查询到20条相似文献,搜索用时 15 毫秒
1.
Elastic energy storage in tendons: mechanical differences related to function and age 总被引:6,自引:0,他引:6
R E Shadwick 《Journal of applied physiology》1990,68(3):1033-1040
We investigated the possibility that tendons that normally experience relatively high stresses and function as springs during locomotion, such as digital flexors, might develop different mechanical properties from those that experience only relatively low stresses, such as digital extensors. At birth the digital flexor and extensor tendons of pigs have identical mechanical properties, exhibiting higher extensibility and mechanical hysteresis and lower elastic modulus, tensile strength, and elastic energy storage capability than adult tendons. With growth and aging these tendons become much stronger, stiffer, less extensible, and more resilient than at birth. Furthermore, these alterations in elastic properties occur to a significantly greater degree in the high-load-bearing flexors than in the low-stress extensors. At maturity the pig digital flexor tendons have twice the tensile strength and elastic modulus but only half the strain energy dissipation of the corresponding extensor tendons. A morphometric analysis of the digital muscles provides an estimate of maximal in vivo tendon stresses and suggests that the muscle-tendon unit of the digital flexor is designed to function as an elastic energy storage element whereas that of the digital extensor is not. Thus the differences in material properties between mature flexor and extensor tendons are correlated with their physiological functions, i.e., the flexor is much better suited to act as an effective biological spring than is the extensor. 相似文献
2.
This article examines an important class of information system that serves as the foundation for corporate energy and greenhouse gas (GHG) accounting: energy and carbon management systems (ECMS). Investors, regulators, customers, and employees increasingly demand that organizations provide information about their organizational energy use and GHG emissions. However, there is little transparency about how organizations use ECMS to meet such demands. To shed light on ECMS implementation and application, we collected extensive qualitative interview data from two service‐sector organizations: one that uses a spreadsheet‐based ECMS and another that implemented an ECMS provided by a third‐party vendor. Our analysis of collected data revealed numerous challenges in the areas of business processes, managerial capabilities, data capture and integration, and data quality. Though our study is built on only two organizations and requires confirmation in large‐sample surveys, we provide several recommendations for organizations regarding ECMS. We also provide suggestions for future studies to build on our tentative results. 相似文献
3.
Cilurzo F Cupone IE Minghetti P Buratti S Selmin F Gennari CG Montanari L 《AAPS PharmSciTech》2010,11(4):1511-1517
This work aimed to develop a fast-dissolving film made of low dextrose equivalent maltodextrins (MDX) containing nicotine
hydrogen tartrate salt (NHT). Particular attention was given to the selection of the suitable taste-masking agent (TMA) and
the characterisation of the ductility and flexibility under different mechanical stresses. MDX with two different dextrose
equivalents (DEs), namely DE 6 and DE 12, were selected in order to evaluate the effect of polymer molecular weight on film
tensile properties. The bitterness and astringency intensity of NHT and the suppression effect of several TMA were evaluated
by a Taste-Sensing System. The films were characterised in term of NHT content, tensile properties, disintegration time and
drug dissolution test. As expected, placebo films made of MDX DE 6 appeared stiffer and less ductile than film prepared using
MDX DE 12. The films disintegrated within 10 s. Among the tested TMA, the milk and mint flavours resulted particularly suitable
to mask the taste of NHT. The addition of NHT and taste-masking agents affected film tensile properties; however, the effect
of the addition of these components can be counterweighted by modulating the glycerine content and/or the MDX molecular weight.
The feasibility of NHT loaded fast-dissolving films was demonstrated. 相似文献
4.
Tensile fatigue tests of acrylic bone cement were conducted under strain control in a wet environment at 37 degrees C. A constant strain rate of 0.02s-1 was used, resulting in physiologic loading frequencies. Comparison of the tensile fatigue data with the results of previous tension-compression fatigue tests indicates that fatigue failure is governed primarily by the maximum cyclic tensile strain. The compressive portion of the loading cycle has little effect on the number of cycles to failure. A new empirically derived equation is introduced to describe the influence of mean strain and strain amplitude on fatigue endurance. The results emphasize the critical role tensile strains may play in cement failure and loosening of total joint replacements. 相似文献
5.
Shot peening can increase the fatigue strength of commercially available surgical plates made of 1.4435 alloy by 40% even in a corrosive environment. Our investigations show that residual stresses resulting from shot peening are reduced by additional bending of the plates. In such plates smaller tensile residual stresses were found than after polishing of the plates. Bending of polished plates results in considerable tensile residual stresses. The hardening achieved by shot peening is not reduced by bending. As the fatigue strength of soft materials depends mainly on the hardening and less on the residual stresses, only little influence of the changed residual stresses on the fatigue strength can be expected. Shot peening of surgical implants thus means an improvement in quality. 相似文献
6.
Jabuticaba‐Inspired Hybrid Carbon Filler/Polymer Electrode for Use in Highly Stretchable Aqueous Li‐Ion Batteries
下载免费PDF全文
![点击此处可从《Liver Transplantation》网站下载免费的PDF全文](/ch/ext_images/free.gif)
Woo‐Jin Song Jeonghwan Park Dong Hyup Kim Sohyun Bae Myung‐Jun Kwak Myoungsoo Shin Sungho Kim Sungho Choi Ji‐Hyun Jang Tae Joo Shin So Youn Kim Kwanyong Seo Soojin Park 《Liver Transplantation》2018,8(10)
Stretchable electronics are considered as next‐generation devices; however, to realize stretchable electronics, it is first necessary to develop a deformable energy device. Of the various components in energy devices, the fabrication of stretchable current collectors is crucial because they must be mechanically robust and have high electrical conductivity under deformation. In this study, the authors present a conductive polymer composite composed of Jabuticaba‐like hybrid carbon fillers containing carbon nanotubes and carbon black in a simple solution process. The hybrid carbon/polymer (HCP) composite is found to effectively retain its electrical conductivity, even when under high strain of ≈200%. To understand the behavior of conductive fillers in the polymer matrix when under mechanical strain, the authors investigate the microstructure of the composite using an in situ small‐angle X‐ray scattering analysis. The authors observe that the HCP produces efficient electrical pathways for filler interconnections upon stretching. The authors develop a stretchable aqueous rechargeable lithium‐ion battery (ARLB) that utilizes this HCP composite as a stretchable current collector. The ARLB exhibits excellent rate capability (≈90 mA h g?1 at a rate of 20 C) and outstanding capacity retention of 93% after 500 cycles. Moreover, the stretchable ARLB is able to efficiently deliver power even when under 100% strain. 相似文献
7.
Lixin Shi 《Molecular simulation》2018,44(17):1363-1370
Molecular dynamics (MD) simulations have been performed on the physically crosslinking poly(vinyl alcohol) (PVA) hydrogel to study the deformation mechanisms under uniaxial tensile conditions. The distributions of hydroxyl oxygens and dihedral angle and the number of hydrogen bonds have been analysed to study the structure of the hydrogel. The water content and temperature dependency of mechanical properties have been investigated. The energy contributions from the partially united atom potential have been calculated as a function of strain. It is found that the stress–strain curve comprises toe region, linear region and yield and failure region which is close to most biomaterials. In the toe and yield region, all the contributions to the internal energy change a little. However, in the linear region, the bond stretching and angle bending energy increase rapidly and mainly dominate the region, and the energy increases more rapidly with the increasing water content but the decreasing temperature. The degree of crosslinking decreases with the increasing deformation. The polymer chains occur significant torsional activity in the toe region. Hydrogen bonds are stable in the toe and yield region, but the hydrogen bonds between hydroxyl groups and waters decrease in the linear region. 相似文献
8.
Relevance of rheological properties of gel beads for their mechanical stability in bioreactors 总被引:3,自引:0,他引:3
Martins Dos Santos VA Leenen EJ Rippoll MM van der Sluis C van Vliet T Tramper J Wijffels RH 《Biotechnology and bioengineering》1997,56(5):517-529
The mechanical stability of biocatalyst particles in bioreactors is of crucial importance for applications of immobilized-cell technology in bioconversions. The common methods for evaluation of the strength of polymer beads (mostly force-to-fracture or tensile tests) are, however, not yet proven to be relevant for the assessment of their mechanical stability in bioreactors. Therefore, we tested fracture properties of gel materials and investigated their relevance for abrasion in bioreactors. Abrasion of gel beads was assumed to be a continuous fracturing of the bead surface. At first, three rheological properties were considered: stress at fracture; strain at fracture; and the total fracture energy. If stress at fracture is the most important property, beads having a similar fracture energy, but a smaller stress at fracture, would abrade faster in a bioreactor than beads with a larger stress at fracture; if fracture energy the determining factor, beads that require less energy to fracture would abrade faster than those having a larger fracture energy for the same fracture stress. To determine this, beads of kappa-carrageenan and agar (at two different polymer concentrations) were tested for abrasion in four identical bubble columns under the same operating conditions. Agar beads were expected to abrade faster than those of carrageenan because agar had either a lower stress at fracture or a lower fracture energy. However, no correlation between fracture properties and abrasion rate was found in any of the combinations tested. Carrageenan beads abraded faster than those of agar in all combinations. Furthermore, both the stress and strain at fracture of agar and carrageenan beads decreased during the run and those of carrageenan decreased faster, suggesting that the gels are liable to fatigue in different ways. This hypothesis was confirmed by oscillating experiments in which gel samples were subjected to repeated compressions below their fracture levels. Their resistance to compression clearly decreased with the number of oscillations. Fatigue is probably related to the development of microcracks and microfracture propagation within the material. We concluded that: (a) the use of tests based on bead rupture do not provide relevant information on the mechanical stability of gel beads to abrasion; and (b) abrasion of polymer beads is likely to be related to fatigue of the gel materials. (c) 1997 John Wiley & Sons, Inc. Biotechnol Bioeng 56: 517-529, 1997. 相似文献
9.
Loss of fixation at the cement-bone interface can contribute to clinical loosening of cemented total hip replacements. In this study, the fatigue damage response was determined for cement-bone constructs subjected to shear fatigue loading. A typical three-phase fatigue response was observed with substantial early damage, followed by a long constant damage rate region and a final abrupt increase in damage to fracture. All of the damage resulted from creep (permanent) deformation during fatigue loading and there was no loss in cyclic stiffness. Using a Von Mises equivalent stress/strain concept, a general damage model was developed to describe the fatigue creep response of the cement-bone interface under either shear or tensile fatigue loading. Time to failure was highly correlated (r2=0.971) with equivalent creep strain rate and moderately related (r2=0.428) with equivalent initial strain for the two loading regimes. The equivalent creep strain at failure (0.052+/-0.018) was found to be independent of the applied equivalent stress. A combination of the creep damage model (to describe the damage process) with a constant final equivalent strain (as a failure criteria) could be used to assess the cement-bone failure response of cemented implant systems. 相似文献
10.
Molecular dynamics (MD) simulations were employed to study the influence of solvents on the structure and mechanical properties of physically crosslinked poly(vinyl alcohol) (PVA) gels. Firstly, three kinds of PVA precursor gels were made by adding water, dimethyl sulfoxide (DMSO) and a mixture of DMSO and water (4:1 by weight), respectively. The solvents in the precursor gels were then exchanged with water to obtain three kinds of PVA hydrogels. Solvent in the precursor gel with a mixture of DMSO and water was also exchanged with ethanol and DMSO, respectively. It was found that the tensile strength and failure strain of the PVA hydrogel prepared from precursor gel with a mixture of DMSO and water was the highest, and the polymer network was more homogeneous than the other two PVA hydrogels. The polymer network of PVA gel with ethanol or with DMSO was more heterogenous than with water, and the tensile strength and failure strain were much lower. The torsional activity of polymer chains of PVA gel with ethanol was much stronger than PVA gel with water and DMSO. 相似文献
11.
R Hawkes 《Journal of cellular physiology》1977,90(1):31-40
Glycerolated stalks of the sessile peritrich ciliate Carchesium sp. were treated with 10(-6) g ion/1 Ca2+ to disrupt the contractile spasmoneme. The resulting preparation consisted primarily of the fibrillar matrix, a dense extra-cellular meshwork of microfibrils. Some mechanical properties of this preparation have been investigated. The matrix tensile force-extension ratio relation for an initial stretch was characteristic of a soft, swollen polymer network, elastic modulus in young stalks 1.7 X 10(5) Nm-2, in mature stalks 4.0 X 10(5) Nm-2. The higher elastic modulus in mature stalks implies an increase in the interchain cross-link frequency. In young stalks, elastic modulus was found to be independent of the ambient Ca2+ concentration in the threshold range for spasmonemal contraction. Stalk relaxation was pronouncedly irreversible, showing stress softening and permanent hysteresis on repeated loading. Hysteresis was time independent and stiffness was not recovered after four hours at zero strain. Hysteresis was enhanced by repeated loading to the same tensile force. Stress-strain hysteresis at a low extension is characteristic of highly filled polymer networks in which polymer chains are interconnected via rigid filler particles as well as directly cross-linked. 相似文献
12.
Simultaneously Enhancing the Thermal Stability,Mechanical Modulus,and Electrochemical Performance of Solid Polymer Electrolytes by Incorporating 2D Sheets
下载免费PDF全文
![点击此处可从《Liver Transplantation》网站下载免费的PDF全文](/ch/ext_images/free.gif)
Wenjing Tang Shan Tang Cuijuan Zhang Qingtao Ma Qian Xiang Ying‐Wei Yang Jiayan Luo 《Liver Transplantation》2018,8(24)
Solid state electrolytes are the key components for high energy density lithium ion batteries and especially for lithium metal batteries where lithium dendrite growth is an inevitable obstacle in liquid electrolytes. Solid polymer electrolytes based on a complex of polymers and lithium salts are intrinsically advantageous over inorganic electrolytes in terms of processability and film‐forming properties. But other properties such as ionic conductivity, thermal stability, mechanical modulus, and electrochemical stability need to be improved. Herein, for the first time, 2D additives using few‐layer vermiculite clay sheets as an example to comprehensively upgrade poly(ethylene oxide)‐based solid polymer electrolyte are introduced. With clay sheet additives, the polymer electrolyte exhibits improved thermal stability, mechanical modulus, ionic conductivity, and electrochemical stability along with reduced flammability and interface resistance. The composite polymer electrolyte can suppress the formation and growth of lithium dendrites in lithium metal batteries. It is anticipated that the clay sheets upgraded solid polymer electrolyte can be integrated to construct high performance solid state lithium ion and lithium metal batteries with higher energy and safety. 相似文献
13.
The mechanical properties of turkey and heron leg tendons have been investigated in dynamic tensile tests. Heron tendons have properties similar to those found for various mammalian tendons. The Young's modulus and the density of turkey tendons increase with increasing calcification. Ultimate tensile stresses are similar to those found for uncalcified tendon, but Young's modulus may reach about 16 GPa, a value normally associated with bone. Calcification lowers the amount of strain energy that can be stored temporarily in the tendons of the legs. The contribution made by elastic strain energy storage to lowering the cost of running is reduced. 相似文献
14.
A surface modification technique was developed for the functionalization of polypyrrole (PPY) film with glucose oxidase (GOD) and viologen moieties. The PPY film was first graft copolymerized with acrylic acid (AAc) and GOD was then covalently immobilized through the amide linkage formation between the amino groups of the GOD and the carboxyl groups of the grafted AAc polymer chains in the presence of a water-soluble carbodiimide. Viologen moieties could also be attached to the PPY film via graft-copolymerization of vinyl benzyl chloride with the PPY film surface followed by reaction with 4,4'-bipyridine and alpha,alpha'-dichloro-p-xylene. X-ray photoelectron spectroscopy (XPS) was used to characterize the PPY films after each surface modification step. Increasing the AAc graft concentration would allow a greater amount of GOD to be immobilized but this would decrease the electrical conductivity of the PPY film. The activity of the immobilized GOD was compared with that of free GOD and the kinetic effects were also studied. The immobilized GOD was found to be less sensitive to temperature deactivation as compared to the free GOD. The results showed that the covalent immobilization technique offers advantages over the technique involving the entrapment of GOD in PPY films during electropolymerization. The presence of viologen in the vicinity of the immobilized GOD also enabled the GOD-catalyzed oxidation of glucose to proceed under UV irradiation in the absence of O(2). 相似文献
15.
B. M. Steels J. Koska C. A. Haynes 《Journal of chromatography. B, Analytical technologies in the biomedical and life sciences》2000,743(1-2)
Non-specific protein adsorption can be reduced by attaching polymer chains by one end to a sorbent surface. End-grafted polymer modified surfaces have also found application in size-based chromatographic bioseparations. To better understand how to tailor surfaces for these applications, a numerical SCF model has been used to calculate theoretical results for the polymer density distribution of interacting polymer chains around a solute particle positioned at a fixed distance from a surface. In addition, the excess energy required to move the particle into the polymer chains (interaction energy) is calculated using a statistical mechanical treatment of the lattice model. The effect of system variables such as particle size, chain length, surface density and Flory interaction parameters on density distributions and interaction energies is also studied. Calculations for the interaction of a solute particle with a surface covered by many polymer chains (a brush) show that the polymer segments will fill in behind the particle quite rapidly as it moves toward the surface. When there is no strong energetic attraction between the polymer and solute we predict that the interaction energy will be purely repulsive upon compression due to losses in conformational entropy of the polymer chains. Above a critical chain length, which depends upon particle size, a maximum in the force required to move the particle toward the surface is observed due to an engulfment of the particle as chains attempt to access the free volume behind the particle. If an attraction exists between the polymer and solute, such that a minimum in the interaction energy is seen, the optimum conditions for solute repulsion occur at the highest surface density attainable. Long chain length can lead to increased solute concentration within the polymer layer due to the fact that an increased number of favourable polymer–solute contacts are able to occur than with short chains at a similar entropic penalty. 相似文献
16.
Traditional and novel techniques were tested and compared for their usefulness in evaluating biodegrad-ability claims made for newly formulated “degradable” plastic film products. Photosensitized polyethylene (PE), starch-PE, extensively plasticized polyvinyl chloride (PVC), and polypropylene (PP) films were incorporated into aerobic soil. Biodegradation was measured for 3 months under generally favorable conditions. Carbon dioxide evolution, residual weight recovery, and loss of tensile strength measurements were supplemented, for some films, by gas chromatographic measurements of plasticizer loss and gel permeation chromatographic (GPC) measurement of polymer molecular size distribution. Six- and 12-week sunlight exposures of photosensitized PE films resulted in extensive photochemical damage that failed to promote subsequent mineralization in soil. An 8% starch-PE film and the plasticized PVC film evolved significant amounts of CO2 in biodegradation tests and lost residual weight and tensile strength, but GPC measurements demonstrated that all these changes were confined to the additives and the PE and PVC polymers were not degraded. Carbon dioxide evolution was found to be a useful screening tool for plastic film biodegradation, but for films with additives, polymer biodegradation needs to be confirmed by GPC. Photochemical cross-linking of polymer strands reduces solubility and may interfere with GPC measurements of polymer degradation. 相似文献
17.
18.
Adeeb SM Zec ML Thornton GM Frank CB Shrive NG 《Journal of biomechanical engineering》2004,126(5):641-650
BACKGROUND: Experiments on the fatigue of tendons have shown that cyclic loading induces failure at stresses lower than the ultimate tensile strength (UTS) of the tendons. The number of cycles to failure (Nf) has been shown to be dependent upon the magnitude of the applied cyclic stress. METHOD OF APPROACH: Utilizing data collected by Schechtman (1995), we demonstrate that the principles of Linear Elastic Fracture Mechanics (LEFM) can be used to predict the fatigue behavior of tendons under cyclic loading for maximum stress levels that are higher than 10% of the ultimate tensile strength (UTS) of the tendon (the experimental results at 10% UTS did not fit with our equations). CONCLUSIONS: LEFM and other FM approaches may prove to be very valuable in advancing our understanding of damage accumulation in soft connective tissues. 相似文献
19.
The effect of surface area and morphological features of filler particles on the fatigue behavior of hydroxyapatite-filled high-density polyethylene composites was studied. Composites containing 40 vol % filler were injection-molded into tensile bars, gamma-irradiated, and subjected to sinusoidal tensile fatigue at a frequency of 2 Hz. To simulate the physiological environment, the tests were conducted at 37 degrees C in saline. Results showed that properties such as secant modulus, cyclic energy dissipation, dynamic creep strain, hysteresis loops, and even fracture surfaces differ depending on the morphology and surface area of the fillers used. 相似文献
20.
Strain energy density function and uniform strain hypothesis for arterial mechanics 总被引:18,自引:0,他引:18
Stress distribution through the wall thickness of the canine carotid artery was analyzed on the basis of the uniform strain hypothesis in which the wall circumferential strain was assumed to be constant over the wall cross-section under physiological loading condition. A newly proposed logarithmic type of strain energy density function was used to describe the wall properties. In contrast with other studies, this hypothesis gave almost uniform distribution of wall stresses under the physiological condition and non-zero residual stresses when all external forces were removed. 相似文献