Quantification of enterococci and human adenoviruses in environmental samples by real-time PCR

Pathogenic bacteria and enteric viruses can be introduced into the environment via human waste discharge. Methods for rapid detection and quantification of human viruses and fecal indicator bacteria in water are urgently needed to prevent human exposure to pathogens through drinking and recreational waters. Here we describe the development of two real-time PCR methods to detect and quantify human adenoviruses and enterococci in environmental waters. For real-time quantification of enterococci, a set of primers and a probe targeting the 23S rRNA gene were used. The standard curve generated using Enterococcus faecalis genomic DNA was linear over a 7-log-dilution series. Serial dilutions of E. faecalis suspensions resulted in a lower limit of detection (LLD) of 5 CFU/reaction. To develop real-time PCR for adenoviruses, degenerate primers and a Taqman probe targeting a 163-bp region of the adenovirus hexon gene were designed to specifically amplify 14 different serotypes of human adenoviruses, including enteric adenovirus serotype 40 and 41. The standard curve generated was linear over a 5-log-dilution series, and the LLD was 100 PFU/reaction using serial dilutions of purified adenoviral particles of serotype 40. Both methods were optimized to be applicable to environmental samples. The real-time PCR methods showed a greater sensitivity in detection of adenoviruses in sewage samples than the viral plaque assay and in detection of enterococci in coastal waters than the bacterial culture method. However, enterococcus real-time PCR overestimated the number of bacteria in chlorinated sewage in comparison with the bacterial culture method. Overall, the ability via real-time PCR to detect enterococci and adenoviruses rapidly and quantitatively in the various environmental samples represents a considerable advancement and a great potential for environmental applications.     

A real‐time PCR method to quantify spores carrying the Bacillus thuringiensis var. israelensis cry4Aa and cry4Ba genes in soil

Aim: To develop a rapid real‐time PCR method for the specific detection and quantification of Bacillus thuringiensis var. israelensis (Bti) spores present in the environment. Methods and Results: Seven soil samples as well as one sediment sample obtained from various regions of Switzerland and characterized by different granulometry, pH values, organic matter and carbonate content were artificially inoculated with known amounts of Bti spores. After DNA extraction, DNA templates were amplified using TaqMan real‐time PCR targeting the cry4Aa and cry4Ba plasmid genes encoding two insecticidal toxins (δ‐endotoxins), and quantitative standard curves were created for each sample. Physicochemical characteristics of the samples tested did not influence DNA extraction efficiency. Real‐time PCR inhibition because of the presence of co‐extracted humic substances from the soil was observed only for undiluted DNA extracts from samples with very high organic matter content (68%). The developed real‐time PCR system proved to be sensitive, detecting down to 1 × 10³ Bti spores per g soil. One‐way analysis of variance confirmed the accuracy of the method. Conclusions: Direct extraction of DNA from environmental samples without culturing, followed by a specific real‐time PCR allowed for a fast and reliable identification and quantification of Bti spores in soil and sediment. Significance and Impact of the Study: The developed real‐time PCR system can be used as a tool for ecological surveys of areas where treatments with Bti are carried out.     

Optimization of methods for detecting Mycobacterium avium subsp. paratuberculosis in environmental samples using quantitative, real-time PCR

Detection of Johne's disease, an enteric infection of cattle caused by Mycobacterium avium subsp. paratuberculosis (M. paratuberculosis), has been impeded by the lack of rapid, reliable detection methods. The goal of this study was to optimize methodologies for detecting M. paratuberculosis in manure from an infected dairy cow or in contaminated soil samples using a quantitative, real-time PCR (QRT-PCR) based analysis. Three different nucleic acid extraction techniques, the efficiency of direct versus indirect sample extraction, and sample pooling were assessed. The limit of detection was investigated by adding dilutions of M. paratuberculosis to soil. Results show that the highest yield (19.4+/-2.3 microg(-1) DNA extract) and the highest copy number of the targeted M. paratuberculosis IS900 sequence (1.3+/-0.2x10(8) copies g(-1) manure) were obtained with DNA extracted from manure using Qbiogene's Fast DNA Spin kit for soil. Pooling ten samples of M. paratuberculosis-contaminated soil improved the limit of detection ten fold (between 20 and 115 M. paratuberculosis cells g(-1) soil). Detection was between 65% and 95% higher when samples were extracted directly using bead-beating than when using pre-treatment with cell extraction buffers. The final soil-sampling and extraction regime was applied for detection of M. paratuberculosis in pasture soil after the removal of a M. paratuberculosis culture positive dairy cow. M. paratuberculosis remained in the pasture soil for more than 200 days. Results from these studies suggest that DNA extraction method, sampling protocol and PCR conditions each critically influence the outcome and validity of the QRT-PCR analysis of M. paratuberculosis concentrations in environmental samples.     

Quantification of Enterococci and Human Adenoviruses in Environmental Samples by Real-Time PCR

Pathogenic bacteria and enteric viruses can be introduced into the environment via human waste discharge. Methods for rapid detection and quantification of human viruses and fecal indicator bacteria in water are urgently needed to prevent human exposure to pathogens through drinking and recreational waters. Here we describe the development of two real-time PCR methods to detect and quantify human adenoviruses and enterococci in environmental waters. For real-time quantification of enterococci, a set of primers and a probe targeting the 23S rRNA gene were used. The standard curve generated using Enterococcus faecalis genomic DNA was linear over a 7-log-dilution series. Serial dilutions of E. faecalis suspensions resulted in a lower limit of detection (LLD) of 5 CFU/reaction. To develop real-time PCR for adenoviruses, degenerate primers and a Taqman probe targeting a 163-bp region of the adenovirus hexon gene were designed to specifically amplify 14 different serotypes of human adenoviruses, including enteric adenovirus serotype 40 and 41. The standard curve generated was linear over a 5-log-dilution series, and the LLD was 100 PFU/reaction using serial dilutions of purified adenoviral particles of serotype 40. Both methods were optimized to be applicable to environmental samples. The real-time PCR methods showed a greater sensitivity in detection of adenoviruses in sewage samples than the viral plaque assay and in detection of enterococci in coastal waters than the bacterial culture method. However, enterococcus real-time PCR overestimated the number of bacteria in chlorinated sewage in comparison with the bacterial culture method. Overall, the ability via real-time PCR to detect enterococci and adenoviruses rapidly and quantitatively in the various environmental samples represents a considerable advancement and a great potential for environmental applications.     

Real-time quantitative PCR assay on bacterial DNA: In a model soil system and environmental samples

Real-time quantitative PCR (RTQ-PCR) was used to quantify the bacterial target DNA extracted by three commonly used DNA extraction protocols (bead mill homogenization, grinding in presence of liquid nitrogen and hot detergent SDS based enzymatic lysis). For the purpose of our study, pure culture of Bacillus cereus (model organism), sterilized soil seeded with a known amount of B. cereus (model soil system) and samples from woodland and grassland (environmental samples) were chosen to extract DNA by three different protocols. The extracted DNA was then quantified by RTQ-PCR using 16S rDNA specific universal bacterial primers. The standard curve used for the quantification by RTQ-PCR was linear and revealed a strong linear relationship (r(2)=0.9968) with a higher amplification efficiency, e5=1.02. High resolution gel electrophoresis was also carried out to observe the effect of these extraction methods on diversity analysis. For the model soil system, the liquid nitrogen method showed the highest target DNA copy number (1.3 x 10(9) copies/microl). However, for both the environmental samples, the bead beating method was found to be suitable on the basis of the high target DNA copy numbers (5.38 x 10(9) and 4.01 x 10(8) copies/ml for woodland and grassland respectively), high yield (6.4 microg/g and 1.76 microg/g of soil for woodland and grassland respectively) and different band patterns on high resolution gel electrophoresis suggesting an overall high extraction efficiency. This difference in the extraction efficiency between the model soil system and environmental samples may be attributed to different affinity of seeded and native DNA to soil particles.     

PCR-based quantification of Pneumocystis carinii in in vitro systems

In many laboratories, PCR has become a routine method for the sensitive diagnosis of Pneumocystis carinii in patient samples. In contrast, quantification of fungal numbers in in vitro setups still largely relies on more conventional procedures such as histological stainings. These are time consuming and their applications are limited when dealing with small fungal numbers contaminated with tissue and cellular debris. This study presents a sensitive and rapid method for P. carinii quantification based on PCR analysis that can be easily integrated into standard detection procedures without requiring any major additional steps. P. carinii-specific PCR performed with total DNA extracted from both standard samples with known fungal numbers and experimental samples was quantified relative to PCR products of a standard concentration from a control plasmid added prior to DNA extraction. This measure controlled for variations in DNA extraction and PCR efficiency among the samples to be compared. The correlation between analyzed P. carinii-specific DNA and the actual fungal numbers employed was highly significant.     

Comparison of rapid methods for the extraction of bacterial DNA from colonic and caecal lumen contents of the pig

AIMS: The increasing uses of DNA methodologies to study the micro flora of the pig gastrointestinal tract requires an efficient recovery of bacterial DNA from the intestinal sample. Thus, the objective of this study was to determine which DNA extraction methods are most effective for luminal samples from pigs. Several routinely used nucleic acid extraction procedures were compared based upon quantity and purity of extracted DNA. METHODS AND RESULTS: DNA was extracted from pig colonic and caecal lumen samples using 19 methods for bacterial DNA extraction. The quantity of total DNA recovered by each extraction method was determined and compared. Two methods using extraction with polyvinylpolypyrrolidone (PVPP) or phenol and two methods involving bead mill homogenization were found to provide the greatest quantity of extracted DNA for both colonic and caecal lumen. Extracted DNA from these four methods was further analysed for purity based upon the presence of PCR inhibitors, which was ascertained by determining the efficiency of amplification of a segment of the 16S rDNA. PCR amplification could be readily achieved with DNA extracted by each of these four methods, but efficiency of amplification tended to be higher with DNA from two of the methods (one extracted with PVPP and one with bead mill homogenization). CONCLUSIONS: Four extraction methods proved to be significantly superior in quantity of DNA extracted from luminal samples. Of these four, no strong inhibitors of PCR amplification were detected in any of the extracted DNA. However, the efficiency of amplification tended to be lower in DNA samples from two of the methods, suggesting the presence of low levels of PCR inhibitors. SIGNIFICANCE AND IMPACT OF THE STUDY: Results of this study provide a basis for choosing which DNA extraction procedures are most effective for use with samples of pig lumen.     

Development of a real-time PCR method for quantification of the three genera Dehalobacter, Dehalococcoides, and Desulfitobacterium in microbial communities

We developed standard curves based on plasmids containing a 16S rRNA gene of a member of one of the three genera Dehalobacter, Desulfitobacterium, and Dehalococcoides. A large difference in amplification efficiency between the standard curves was observed ranging from 1.5 to 2.0. The total eubacterial 16S rRNA gene copy number determined in a sample DNA by using eubacterial primers and the three standard curves led to differences in the estimated copy numbers of a factor up to 73. However, the amplification efficiencies for one specific standard curve were the same independent of the PCR primer pair used. This allowed the determination of the abundance of a population expressed as fractional number, hence, the percentage of genus-specific copy numbers within the total eubacterial 16S rRNA gene copy numbers. Determination of the fractional numbers in DNA mixtures of known composition showed the accuracy of this approach. The average difference in threshold value between two 10-fold dilutions of DNA of pure cultures, mixtures thereof and of environmental samples was -3.45+/-0.34, corresponding to an average almost optimal amplification efficiency of 1.95. This indicated that the low amplification efficiency of certain standard curves seemed to be mainly a problem of the plasmid DNA used and not of the 16S rRNA gene of the target genera.     

Improvements for comparative analysis of changes in diversity of microbial communities using internal standards in PCR-DGGE

The use of internal standards both during DNA extraction and PCR-DGGE procedure gives the opportunity to analyse the relative abundance of individual species back to the original sample, thereby facilitating relative comparative analysis of diversity. Internal standards were used throughout the DNA extraction and PCR-DGGE to compensate for experimental variability. Such variability causes decreased reproducibility among replicate samples as well as compromise comparisons between samples, since experimental errors cannot be differentiated from actual changes in the community abundance and structure. The use of internal standards during DNA extraction and PCR-DGGE is suitable for ecological and ecotoxicological experiments with microbial communities, where relative changes in the community abundance and structure are studied. We have developed a protocol Internal Standards in Molecular Analysis of Diversity (ISMAD) that is simple to use, inexpensive, rapid to perform and it does not require additional samples to be processed. The internal standard for DNA extraction (ExtrIS) is a fluorescent 510-basepair PCR product which is added to the samples prior to DNA extraction, recovered together with the extracted DNA from the samples and analysed with fluorescence spectrophotometry. The use of ExtrIS during isolation of sample DNA significantly reduced variation among replicate samples. The PCR internal standard (PCR(IS)) originates from the Drosophila melanogaster genome and is a 140-basepair long PCR product, which is amplified by non-competitive primers in the same PCR reaction tubes as the target DNA and analysed together with the target PCR product on the same DGGE gel. The use of PCR(IS) during PCR significantly reduced variation among replicate samples both when assessing total PCR product and when comparing bands representing species on a DGGE gel. The entire ISMAD protocol was shown to accurately describe changes in relative abundance in an environmental sample using PCR-DGGE. It should, however, be mentioned that despite the use of ISMAD some inherent biases still exist in DNA extraction and PCR-DGGE and these should be taken into consideration when interpreting the diversity in a sample based on a DGGE gel.     

Development and validation of a real-time PCR method to quantify rumen protozoa and examination of variability between entodinium populations in sheep offered a hay-based diet

PCR and real-time PCR primers for the 18S rRNA gene of rumen protozoa (Entodinium and Dasytricha spp.) were designed, and their specificities were tested against a range of rumen microbes and protozoal groups. External standards were prepared from DNA extracts of a rumen matrix containing known numbers and species of protozoa. The efficiency of PCR (epsilon) was calculated following amplification of serial dilutions of each standard and was used to calculate the numbers of protozoa in each sample collected; serial dilutions of DNA were used similarly to calculate PCR efficiency. Species of Entodinium, the most prevalent of the rumen protozoa, were enumerated in rumen samples collected from 100 1-year-old merino wethers by microscopy and real-time PCR. Both the counts developed by the real-time PCR method and microscopic counts were accurate and repeatable, with a strong correlation between them (R2= 0.8), particularly when the PCR efficiency was close to optimal (i.e., two copies per cycle). The advantages and disadvantages of each procedure are discussed. Entodinium represented on average 98% of the total protozoa, and populations within the same sheep were relatively stable, but greater variation occurred between different sheep (10(0) and 10(6) entodinia per gram of rumen contents). With this inherent variability, it was estimated that, to detect a statistically significant (P = 0.05) 20% change in Entodinium populations, 52 sheep per treatment group would be required.     

Quantification of Fusarium culmorum in Wheat and Barley Tissues Using Real-Time PCR in Comparison with DON Content

A real‐time polymerase chain reaction (PCR) assay was developed for the specific detection of Fusarium culmorum in infected seeds. Primers and TaqMan minor groove binder probe were derived from the sequences of a F. culmorum specific PCR product. The specificity of the assay was confirmed by test in seven Fusarium species and 21 non‐Fusarium fungal species. With serial dilutions of purified genomic DNA from F. culmorum isolate B as the template, the detection limit of the assay was found to be 0.9 pg of fungal genomic DNA per reaction. A significant correlation ( = 0.982) and collinearity was found between DNA concentration and Ct (cycle threshold) values of real‐time PCR assay with serial diluted DNAs extracted from three seed samples with different deoxynivalenol (DON) content. Eight barley and nine wheat varieties infected by F. culmorum isolate B were evaluated in 1 (barley samples) and in 4 years (wheat samples). The results of real‐time PCR analysis and enzyme‐linked immunosorbent assay testing for DON content were compared and a significant correlation was found for barley samples (r² = 0.935). Concerning wheat we found rather complicated relationship between Ct values and DON contents influenced by environmental conditions of field trials. The real‐time PCR assay was found to be highly specific and sensitive. It could be used in phytopathological studies and praxis.     

Sensitive and rapid quantitative detection of anthrax spores isolated from soil samples by real-time PCR

Quantitative analysis of anthrax spores from environmental samples is essential for accurate detection and risk assessment since Bacillus anthracis spores have been shown to be one of the most effective biological weapons. Using TaqMan real-time PCR, specific primers and probes were designed for the identification of pathogenic B. anthracis strains from pag gene and cap gene on two plasmids, pXO1 and pXO2, as well as a sap gene encoded on the S-layer. To select the appropriate lysis method of anthrax spore from environmental samples, several heat treatments and germination methods were evaluated with multiplex-PCR. Among them, heat treatment of samples suspended with sucrose plus non-ionic detergent was considered an effective spore disruption method because it detected up to 10(5) spores/g soil by multiplex-PCR. Serial dilutions of B. anthracis DNA and spore were detected up to a level of 0.1 ng/ microliters and 10 spores/ml, respectively, at the correlation coefficient of 0.99 by real-time PCR. Quantitative analysis of anthrax spore could be obtained from the comparison between C(T) value and serial dilutions of soil sample at the correlation coefficient of 0.99. Additionally, spores added to soil samples were detected up to 10(4) spores/g soil within 3 hr by real-time PCR. As a consequence, we established a rapid and accurate detection system for environmental anthrax spores using real-time PCR, avoiding time and labor-consuming preparation steps such as enrichment culturing and DNA preparation.     

Quantitative analysis of total mitochondrial DNA: competitive polymerase chain reaction versus real-time polymerase chain reaction

An efficient and effective method for quantification of small amounts of nucleic acids contained within a sample specimen would be an important diagnostic tool for determining the content of mitochondrial DNA (mtDNA) in situations where the depletion thereof may be a contributing factor to the exhibited pathology phenotype. This study compares two quantification assays for calculating the total mtDNA molecule number per nanogram of total genomic DNA isolated from human blood, through the amplification of a 613-bp region on the mtDNA molecule. In one case, the mtDNA copy number was calculated by standard competitive polymerase chain reaction (PCR) technique that involves co-amplification of target DNA with various dilutions of a nonhomologous internal competitor that has the same primer binding sites as the target sequence, and subsequent determination of an equivalence point of target and competitor concentrations. In the second method, the calculation of copy number involved extrapolation from the fluorescence versus copy number standard curve generated by real-time PCR using various dilutions of the target amplicon sequence. While the mtDNA copy number was comparable using the two methods (4.92 +/- 1.01 x 10(4) molecules/ng total genomic DNA using competitive PCR vs 4.90 +/- 0.84 x 10(4) molecules/ng total genomic DNA using real-time PCR), both inter- and intraexperimental variance were significantly lower using the real-time PCR analysis. On the basis of reproducibility, assay complexity, and overall efficiency, including the time requirement and number of PCR reactions necessary for the analysis of a single sample, we recommend the real-time PCR quantification method described here, as its versatility and effectiveness will undoubtedly be of great use in various kinds of research related to mitochondrial DNA damage- and depletion-associated disorders.     

Comparison of three methods for DNA extraction from bone remains

Extraction of amplifiable DNA is a frequent problem when working with degraded specimens like bone samples. The possibility of obtaining as much information as possible from these samples has a particular significance in many forensic investigations. The present investigation was aimed to assess the efficiency of three organic extraction methods for purifying amplifiable DNA from bone samples. The amount of nucleic acids obtained, the success rate in the amplification of DNA microsatellite (STR) markers and amelogenin by PCR, the influence of PCR inhibitors and environmental conditions, and where the samples were found before their processing in the laboratory, were all evaluated in this investigation for the three methods. Results showed that method A (a modification of FBI method for DNA extraction) performed better in producing not a higher amount but a better quality amplifiable DNA, in comparison with the other two methods evaluated. It was also demonstrated that the quality of the DNA to be amplified by PCR was influenced by the presence of inhibitors and/or contaminants and the environmental conditions where the bone sample was taken from. The worst conditions were observed from aquatic environments. The results suggest that the implementation of some specific modifications in the method A (use of purification columns, reliable quantification methods and different dilutions) would help to obtain better DNA extracts intended to be used in different molecular identification tests.     

DNA extraction from archival formalin-fixed, paraffin-embedded tissue sections based on the antigen retrieval principle: heating under the influence of pH.

During the course of diagnostic surgical pathology, pathologists have established a large collection of formalin-fixed, paraffin-embedded tissues that form invaluable resources for translational studies of cancer and a variety of other diseases. Accessibility of macromolecules in the fixed tissue specimens is a critical issue as exemplified by heat-induced antigen retrieval (AR) immunohistochemical (IHC) staining. On the basis of observations that heating may also enhance in situ hybridization (ISH) and the similarity of formalin-induced chemical modifications that occur in protein and in DNA, we designed a study to examine the efficiency of DNA extraction from archival formalin-fixed, paraffin-embedded tissues using an adaptation of the basic principles of the AR technique, i.e., heating the tissue under the influence of different pH values. Archival paraffin blocks of lymph nodes, tonsil, and colon were randomly selected. Each paraffin block was prepared in 34 microtubes. For each paraffin block, one tube was used as a control sample, using a non-heating DNA extraction protocol. The other 33 tubes were tested using a heating protocol under 11 variable pH values (pH 2 to 12) under three different heating conditions (80, 100, and 120C). Evaluation of the results of DNA extraction was carried out by measuring yields by photometry and PCR amplification, as well as kinetic thermocycling (KTC)-PCR methods. In general, lower pH (acid) solutions gave inferior results to solutions at higher pH (alkaline). Heating tissues at a higher temperature and at pH 6-9 gave higher yields of DNA. There appeared to be a peak in terms of highest efficiency of extracted DNA at around pH 9. The average ratios 260:280 of extracted DNA also showed better values for samples heated at 120C. PCR products of three primers showed satisfactory results for DNA extracted from archival paraffin-embedded tissues by heating protocols at pH 6-12, with results that were comparable to the control sample subjected to the standard non-heating, enzymatic DNA extraction method. This study is the first to document the use of heating at an alkaline pH for DNA extraction from archival formalin-fixed, paraffin-embedded tissues, a recommendation based on the principles of AR for protein IHC. These findings may lead to a more effective protocol for DNA extraction from archival paraffin-embedded tissues and may also provide enhanced understanding of changes that occur during formalin-induced modification of nucleic acids.     

Detection of Coxiella burnetii in complex matrices by using multiplex quantitative PCR during a major Q fever outbreak in The Netherlands

Q fever, caused by Coxiella burnetii, is a zoonosis with a worldwide distribution. A large rural area in the southeast of the Netherlands was heavily affected by Q fever between 2007 and 2009. This initiated the development of a robust and internally controlled multiplex quantitative PCR (qPCR) assay for the detection of C. burnetii DNA in veterinary and environmental matrices on suspected Q fever-affected farms. The qPCR detects three C. burnetii targets (icd, com1, and IS1111) and one Bacillus thuringiensis internal control target (cry1b). Bacillus thuringiensis spores were added to samples to control both DNA extraction and PCR amplification. The performance of the qPCR assay was investigated and showed a high efficiency; a limit of detection of 13.0, 10.6, and 10.4 copies per reaction for the targets icd, com1, and IS1111, respectively; and no cross-reactivity with the nontarget organisms tested. Screening for C. burnetii DNA on 29 suspected Q fever-affected farms during the Q fever epidemic in 2008 showed that swabs from dust-accumulating surfaces contained higher levels of C. burnetii DNA than vaginal swabs from goats or sheep. PCR inhibition by coextracted substances was observed in some environmental samples, and 10- or 100-fold dilutions of samples were sufficient to obtain interpretable signals for both the C. burnetii targets and the internal control. The inclusion of an internal control target and three C. burnetii targets in one multiplex qPCR assay showed that complex veterinary and environmental matrices can be screened reliably for the presence of C. burnetii DNA during an outbreak.     

Estimating amplification efficiency improves multiplex real-time PCR quantification of Bacillus licheniformis and Bacillus subtilis spores in animal feed

A multiplex real-time PCR assay was developed for absolute quantification in animal feed of Bacillus subtilis CH201 and Bacillus licheniformis CH200 spores, which constitute the viable component of the microbial growth promoter, BioPlus 2B. Spores were lysed using a bead-beating protocol. DNA was extracted and purified from the lysates with the Qiagen DNeasy Plant Kit. Two standard curves for absolute quantification were made and tested. Standard curve-1 was made from feed samples spiked with BioPlus 2B, while standard curve-2 was made from serially diluted DNA extracted from BioPlus 2B powder. Feed samples supplemented with BioPlus 2B were quantified using both standard curves. The detection limit of the assay was 10(4) CFU g(-1) of feed. The amplification efficiency (Eff) of each PCR was determined using the LinRegPCR software and Eff differences between individual samples and standards were corrected for. When compared to plate counts, standard curve-1 slightly under-estimated the number of spores (mean=-2.47% of plate counts). A spore density-dependent Eff was found, and Eff for standard curve-1 could not be determined. Standard curve-2 over-estimated spore numbers when not corrected for individual Eff (mean=+5.46% of plate counts). Standard curve-2 Eff was independent (Eff(mean)=1.96) of spore density. The assay quantified the numbers of spores in feed samples very similar to plate counts (mean=+0.47% of plate counts), when standard curve-2 was used and individual Eff was accounted for.     

Performance comparison of genetic markers for high‐throughput sequencing‐based biodiversity assessment in complex communities

Metabarcode surveys of DNA extracted from environmental samples are increasingly popular for biodiversity assessment in natural communities. Such surveys rely heavily on robust genetic markers. Therefore, analysis of PCR efficiency and subsequent biodiversity estimation for different types of genetic markers and their corresponding primers is important. Here, we test the PCR efficiency and biodiversity recovery potential of three commonly used genetic markers – nuclear small subunit ribosomal DNA (18S), mitochondrial cytochrome c oxidase subunit I (COI) and 16S ribosomal RNA (mt16S) – using 454 pyrosequencing of a zooplankton community collected from Hamilton Harbour, Ontario. We found that biodiversity detection power and PCR efficiency varied widely among these markers. All tested primers for COI failed to provide high‐quality PCR products for pyrosequencing, but newly designed primers for 18S and 16S passed all tests. Furthermore, multiple analyses based on large‐scale pyrosequencing (i.e. 1/2 PicoTiter plate for each marker) showed that primers for 18S recover more (38 orders) groups than 16S (10 orders) across all taxa, and four vs. two orders and nine vs. six families for Crustacea. Our results showed that 18S, using newly designed primers, is an efficient and powerful tool for profiling biodiversity in largely unexplored communities, especially when amplification difficulties exist for mitochondrial markers such as COI. Universal primers for higher resolution markers such as COI are still needed to address the possible low resolution of 18S for species‐level identification.