Design of luminescence photobiosensors

The potential of immobilized enzyme membranes in biosensors has been explored in our group for several years. Although part of our work has been mainly devoted to electrochemical transducers and oxidases for the design of enzyme electrodes, the demand for ultrasensitive and highly selective sensors led us to consider the use of luminescent enzyme systems associated to optical transduction. When considering the need for operational and reliable biosensors in biotechnology, immobilization and stability of the sensing element still remain, in most cases, an unavoidable problem. We recently proposed a very fast and reliable procedure for preparing enzymatic membranes from Pall (Biodyne Immunoaffinity membranes) supplied in a pre-activated form. Both the firefly and bacterial systems as well as peroxidase for the chemiluminescent determination of various analytes, could be bound to such a support. Based on this approach, a fibre-optic sensor with immobilized enzymes has been designed which permits bio- or chemiluminescent analysis of ATP, NADH or H₂O₂ respectively. With the NADH-based system, other analytes could be detected using coupled dehydrogenases. This device appears very promising and includes the convenience of both the luminescence sensitivity as well as the handling of the biosensor design.     

Fibre-optic biosensor based on luminescence and immobilized enzymes: Microdetermination of sorbitol,ethanol and oxaloacetate

We have investigated highly selective and ultrasensitive biosensors based on luminescent enzyme systems linked to optical transducers. A fibre-optic sensor with immobilized enzymes was designed; the solid-phase bioreagent was maintained in close contact with the tip of a glass fibre bundle connected to the photomultiplier tube of a luminometer. A bacterial luminescence fibre-optic sensor was used for the microdetermination of NADH. Various NAD(P)-dependent enzymes, sorbitol dehydrogenase, alcohol dehydrogenase and malate dehydrogenase, were co-immobilized on preactivated polyamide membranes with the bacterial system and used for the microdetermination of sorbitol, ethanol and oxaloacetate at the nanomolar level with a good precision.     

Chemiluminescent and bioluminescent assays as innovative prospects for mycotoxin determination in food and feed.

Mycotoxin contamination of food and feedstuffs is among the top priorities for human and animal safety. The currently used techniques for mycotoxin determination, either chromatography or ELISA, are unsuitable for routine in-field assessment. There is an urgent need for other accurate, simple and cost-effective techniques that can be used as a screening tool for a rapid estimation of mycotoxin contamination in commodity lots. This paper reviews the literature on the use of chemiluminescence (CL) and bioluminescence (BL) assays for direct or indirect mycotoxin assessment. The chemiluminescence immunoassays, adenosine triphosphate (ATP) bioluminescence and bioassays are reviewed and their advantages and limitations discussed. These techniques used in food testing and the pharmaceutical industry offer promise as rapid techniques for mycotoxin determination. Chemiluminescence and bioluminescence bioassays are the most innovative alternatives to the conventional techniques used for mycotoxin determination in food and feed.     

Flow-injection chemiluminescence determination of catecholamines based on their enhancing effects on the luminol-potassium periodate system.

A rapid and sensitive chemiluminescence (CL) method using flow injection analysis is described for the determination of four catecholamines, dopamine, adrenaline, isoprenaline and noradrenaline, based on their greatly enhancing effects on the CL reaction of luminol-potassium periodate in basic solutions. The optimized chemical conditions for the chemiluminescence reaction were 1.0 x 10(-4) mol/L luminol and 1.0 x 10(-5) mol/L potassium periodate in 0.2 mol/L sodium hydroxide (NaOH). Under the optimized conditions, the calibration graphs relating the CL signal intensity (peak height) to the concentration of the analytes were curvilinear and they were suitable for determining dopamine, adrenaline, isoprenaline, and noradrenaline in the range 0.1-10 ng/mL, 0.1-100 ng/mL, 1-100 ng/mL and 5-50 ng/mL, respectively, with the relative standard deviations of 0.8-1.7%. The detection limits of the method are 0.02 ng/mL for dopamine, 0.01 ng/mL for adrenaline, 0.1 ng/mL for isoprenaline and 2.0 ng/mL for noradrenaline. The sampling frequency was calculated to be about 60/h. The selectivity of the method was good, because a series of common ions or excipients, such as K(+), Ba(2+), CO(3)(2-), NO(3)(-), SO(4)(2-), PO(4)(3-), sodium citrate, sodium bisulphite, oxidate dopamine, starch, lactose, carbamide and gelatin, could not produce interference when their concentrations were 1000-fold than those of dopamine. The present method was successfully applied to the determination of the four catecholamines in pharmaceutical injections.     

Theoretical analysis of intrinsic reaction kinetics and the behavior of immobilized enzymes system for steady-state conditions

Mathematical modeling of immobilized enzymes under different kinetics mechanism viz. simple Michaelis–Menten, uncompetitive substrate inhibition, total competitive product inhibition, total non-competitive product inhibition and reversible Michaelis–Menten reaction are discussed. These five kinetic models are based on reaction diffusion equations containing non-linear terms related to Michaelis–Menten kinetics of the enzymatic reaction. Modified Adomian decomposition method is employed to derive the general analytical expressions of substrate and product concentration for all these five mechanisms for all possible values of the parameters Φ_S (Thiele modulus for substrate), Φ_P (Thiele modulus for product) and α (dimensionless inhibition degree). Also we have presented the general analytical expressions for the mean integrated effectiveness factor for all values of parameters. Analytical results are compared with the numerical results and also with the limiting case results, which are found to be good in agreement.     

Flow injection chemiluminescence determination of captopril based on its enhancing effect on the luminol–ferricyanide/ferrocyanide reaction

A new flow injection chemiluminescence method is described for the determination of captopril. It is based on the enhancing effect of captopril on the chemiluminescence reaction of luminol with potassium ferricyanide in alkaline solution in the presence of potassium ferrocyanide. The method allows the determination of captopril over 0.1–40 µg/mL range, with a relative standard deviation (SD) of 1.0% for the determination of 0.5 µg/mL captopril solution in 11 repeated measurements. The method was satisfactorily applied to the determination of captopril in commercial captopril tablets. The possible reaction mechanism is also discussed briefly. Copyright © 2002 John Wiley & Sons, Ltd.     

两种萤火虫荧光素酶活性检测方法的一致性比较

目的：比较2种萤火虫荧光素酶活性检测方法的一致性。方法：分别采用化学发光技术（Che）及活体光学成像技术（Bio）,从细胞和动物水平检测在转染以萤火虫荧光素酶为报告基因的载体pCI-AAA-Fluc-neo后不同时间点,萤火虫荧光素酶的表达强度。结果：在细胞和动物水平,萤火虫荧光素酶的表达强度均随时间推移逐步递减。在HepG2细胞,萤火虫荧光素酶表达持续96h,活性从24h的2781±220mV（1．6×10^6±2．3×10^5光子）降至96h的49±3．5mV（6．4×10^4±2．5×10^4光子）。在动物水平得到相似的结果,BALB／c小鼠萤火虫荧光素酶表达持续20d,其活性从1d的16592±409mV（1．9×10^8±3．6×10^6光子）降至20d的798±139mV（3．37×10^5±3．8×10^4光子）。通过一致性检验,2种检测方法在细胞和动物水平的直线回归方程分别为lgChe=1．186·lgBio-3．764（r=-0．937,P〈0．001）和lgChe=0．451·lgBio＋0．64（r=0．915,P〈0．001）;进一步将理论数据与实验数据进行配对t检验,二者无统计学差异（P〉0．05）。结论：2种检测方法是一致的;从整个实验过程来看,活体光学成像技术较化学发光法更为简便、直观,可量化地对同一个体连续检测,减少了个体间差异和实验动物用量。     

Highly selective determination of phenolphthalein by flow injection chemiluminescence method based on a molecular imprinting polymer

The phenolphthalein‐imprinted polymer was prepared with methacrylic acid as functional monomer and ethylene glycol dimethacrylate as cross‐linker. Taking advantage of the quenching effect of phenolphthalein on the potassium permanganate–HCl–anhydrous alcohol chemiluminescence system, a new model was established to determine phenolphthalein by a highly selective flow injection chemiluminescence method. The traditional flow‐though cell was replaced with a novel flow path using a Y‐shaped polymethyl methacrylate column, through which the three reactants were injected simultaneously. The linear range of this assay was from 1.0 × 10^?8 to 1.0 × 10^?6 g/mL (r = 0.9978). The limit of detection was 8.9 × 10^?9 g/mL. The relative standard deviation for the determination of 1.0 × 10^?8 g/mL phenolphthalein solution was below 2.9% (n = 11). The proposed method was applied to the determination of phenolphthalein in real samples with satisfactory results. Copyright © 2009 John Wiley & Sons, Ltd.     

Solid-phase assay for the detection of low-abundance enzymes, and antibodies to enzymes in immune reactions, using acid sphingomyelinase as a model

The development of a solid-phase immunosorbent assay, suitable for use with enzyme antigens, is described. Acid sphingomyelinase and a mouse monoclonal anti-sphingomyelinase antibody have been used to determine optimal conditions for the assay. The assay involves immobilization of a second antibody (anti-mouse IgG) in the wells of a polyvinyl microtiter plate. Soluble immune complexes of first antibody (monoclonal anti-sphingomyelinase) and antigen (sphingomyelinase), incubated in separate vials, are then reacted in the anti-mouse IgG-coated assay wells, and the extent of the cross-reaction between antibody and antigen is measured by direct assay of enzyme retained in the well. A necessary condition of the assay is that antibody must not inhibit enzyme activity, which makes it especially suitable for monoclonal antibodies. The assay finds useful application in hybridoma fluid screening, equivalence point determination, and demonstration of cross-reacting enzyme from various tissue sources.     

Flow-injection chemiluminescent determination of glycerol-3-phosphate and glycerophosphorylcholine using immobilized enzymes

Flow injection procedures with immobilized enzyme mini-columns are described for the determination of glycerol-3-phosphate, and glycerophosphorylcholine with chemiluminescent detection. The hydrogen peroxide produced on-line is coupled with a luminol (5-amino-2,3-dihydro-1,4-phthalazinedione) peroxidation chemiluminescent system. The detection limits for glycerol-3-phosphate and glycerophosphorylcholine are 5×10⁻⁷ M and 1×10⁻⁶ M respectively with r.s.d. <2%. The sample throughput is 40/h. The immobilized enzyme columns did not show any deterioration in activity after usage for 3 months. © 1997 John Wiley & Sons, Ltd.     

Flow injection determination of diclofenac sodium based on its sensitizing effect on the chemiluminescent reaction of acidic potassium permanganate–formaldehyde

A sensitive and simple chemiluminescent (CL) method for the determination of diclofenac sodium has been developed by combining the flow injection technique and its sensitizing effect on the weak CL reaction between formaldehyde and acidic potassium permanganate. A calibration curve is constructed for diclofenac sodium under optimized experimental parameters over the range 0.040–5.0 µg/mL and the limit of detection is 0.020 µg/mL (3σ). The inter‐assay relative standard deviation for 0.040 µg/mL diclofenac sodium (n = 11) is 2.0%. This method is rapid, sensitive, simple, and shows good selectivity and reproducibility. The proposed method has been successfully applied to the determination of the studied diclofenac sodium in pharmaceutical preparations with satisfactory results. Furthermore, the possible mechanism for the CL reaction has been discussed in detail on the basis of UV and CL spectra. Copyright © 2014 John Wiley & Sons, Ltd.     

Direct chemiluminescence determination of ibuprofen by the enhancement of the KMnO(4)-sulphite reaction.

A simple, rapid, flow-injection chemiluminescence (CL) method is described for the determination of ibuprofen. A strong CL signal was detected when a mixture of the analyte and sulphite was injected into acidic KMnO(4). The CL signal is proportional to the concentration of ibuprofen in the range 0.1-10.0 mg/L. The detection limit is 0.02 mg/L ibuprofen, the relative standard deviation is 1.8% (0.5 mg/L ibuprofen; n = 11) and the sample measurement frequency is 120/h. The proposed method was successfully applied to the determination of ibuprofen in pharmaceutical preparations and in spiked urine samples. The mechanism of the CL reaction is also discussed.     

Flow injection chemiluminescence determination of 2‐methoxyestradiol based on inhibition of luminol‐potassium ferricyanide reaction

A novel flow‐injection chemiluminescence (FI‐CL) method is described for the determination of 2‐methoxyestradiol (2‐ME). The method is based on the inhibitory effect of 2‐ME on the CL reaction of luminol and potassium ferricyanide in alkaline solution. Under optimal conditions, net CL intensity was proportional to 2‐ME concentration in synthetic and mouse plasma samples. Corresponding linear regression equations were 8.0 x 10^‐9‐1.0 x 10^‐7g/mL for synthetic samples and 2.0 x 10^‐9‐1.0 x 10^‐7g/mL for plasma samples. Detection limit for synthetic samples and limits for quantification of plasma samples were 8.4 x 10^‐10g/mL (3σ) for synthetic samples and 4.0 x 10^‐9g/mL for mouse samples. A complete analysis was performed for 60 s, including washing and sampling, resulting in a throughput of ≈ 60/h. The proposed method was applied for the determination of 2‐ME in synthetic and mouse plasma samples. Percentage recoveries were 101.0‐102.8% and 98.0‐105.0%, respectively. A possible mechanism responsible for CL reaction is proposed. Copyright © 2012 John Wiley & Sons, Ltd.     

Flow‐injection chemiluminescence method for the determination of naphazoline hydrochloride and oxymetazoline hydrochloride

A sensitive and simple flow‐injection chemiluminescence (FI‐CL) method, which was based on the CL intensity generated from the redoxreaction of potassium permanganate (KMnO₄)–formaldehyde in vitriol (H₂SO₄) medium, has been developed, validated and applied for the determination of naphazoline hydrochloride and oxymetazoline hydrochloride. Besides oxidants and sensitizers, the effect of the concentration of H₂SO₄, KMnO₄ and formaldehyde was investigated. Under the optimum conditions, the linear range was 1.0 × 10^?2–7.0 mg/L for naphazoline hydrochloride and 5.0 × 10^?2–10.0 mg/L for oxymetazoline hydrochloride. During seven repeated inter‐day and intra‐day precision tests of 0.1, 1.0 and 10.0 mg/L samples, the relative standard deviations all corresponded to reference values. The detection limit was 8.69 × 10^?3 mg/L for naphazoline hydrochloride and 3.47 × 10^?2 mg/L for oxymetazoline hydrochloride (signal‐to‐noise ratio ≤3). This method has been successfully implemented for the determination of naphazoline hydrochloride and oxymetazoline hydrochloride in pharmaceuticals. Copyright © 2009 John Wiley & Sons, Ltd.     

Flow injection determination of benzhexol based on its sensitizing effect on the chemiluminescent reaction of Ce(IV)–sulfite

In this paper, a novel chemiluminescent (CL) method for the determination of benzhexol has been developed by combining the flow injection technique and its sensitizing effect on the weak CL reaction between sulfite and acidic cerium(IV). A mechanism for the CL reaction has been proposed on the basis of CL spectra. Under the optimized conditions, the proposed method allows the measurement of benzhexol hydrochloride over the range 0.1–10 μg/mL with a correlation coefficient of 0.9992 (n = 8), a detection limit of 0.02 μg/mL (3σ), and a relative standard deviation for 2.0 μg/mL benzhexol (n = 11) of 1.65%. The utility of this method was demonstrated by determining benzhexol hydrochloride in tablets. Copyright © 2009 John Wiley & Sons, Ltd.     

Flow injection chemiluminescent assays for glycerol and triglycerides using a co‐immobilized enzyme reactor

A flow injection method for the determination of glycerol using a co‐immobilized enzyme reactor containing glycerokinase and glycerol‐3‐phosphate oxidase is described. The hydrogen peroxide produced is monitored by using a luminol chemiluminescence reaction in the presence of catalyst such as Co(II). The detection limit (2.5 × blank noise) for glycerol is 7 × 10^?3 mmol/L with a sample throughput of 40/h. The calibration graph is linear over the range studied (0.2–1.0 mmol/L) with relative standard deviation 1.2–2.4%. The method is applied to the determination of glycerol in blood serum produced off‐line from triglycerides using lipase isolated from bovine pancreas. Copyright © 2003 John Wiley & Sons, Ltd.     

A novel chemiluminescence system for the determination of daidzein and its hydroxyl radical-scavenging capacity

A novel chemiluminescence (CL) system was established for the determinations of daidzein in pharmaceutical preparations and to assess its ability to scavenge hydroxyl radicals. It was shown that a strong CL signal generated when eosin Y was mixed with Fenton reagent was decreased significantly when daidzein was added to the reaction system due to partial scavenging of the hydroxyl radicals in the solution. The extent of decrease in the CL intensity had a good stoichiometric relationship with the daidzein concentration. Based on this, we developed a new method for the determination of daidzein, using a flow‐injection chemiluminescence (FI–CL) technique. Under the optimal conditions, the linear range of daidzein concentration was 8.0 × 10^–8–3.0 × 10^–6 mol/L (R = 0.9982), with a detection limit of 9.0 × 10^–9 mol/L (S:N = 3), and the RSD was 5.8% for 1.0 × 10^–6 mol/L daidzein (n = 11). This method was successfully used in the determination of daidzein in tablets and for evaluation of the hydroxyl radical‐scavenging capacity of daidzein. The possible reaction mechanism of the CL system is discussed. Copyright © 2011 John Wiley & Sons, Ltd.     

Activation of polyvinyl chloride sheet surface for covalent immobilization of oxalate oxidase and its evaluation as inert support in urinary oxalate determination

Polyvinyl chloride (PVC) sheets are a promising material for enzyme immobilization owing to the PVC’s properties such as being chemically inert, corrosion free, weather resistant, tough, lightweight, and maintenance free and having a high strength-to-weight ratio. In this study, this attractive material surface was chemically modified and exploited for covalent immobilization of oxalate oxidase using glutaraldehyde as a coupling agent. The enzyme was immobilized on activated PVC surface with a conjugation yield of 360 μg/cm². The scanning electron micrographs showed the microstructures on the PVC sheet surface revealing the successful immobilization of oxalate oxidase. A colorimetric method was adopted in evaluating enzymatic activity of immobilized and native oxalate oxidase. The immobilized enzyme retained 65% of specific activity of free enzyme. Slight changes were observed in the optimal pH, incubation temperature, and time for maximum activity of immobilized oxalate oxidase. PVC support showed no interference when immobilized oxalate oxidase was used for estimation of oxalic acid concentration in urine samples and showed a correlation of 0.998 with the values estimated with a commercially available Sigma kit. The overall results strengthen our view that PVC sheet can be used as a solid support for immobilization of enzymes and in the field of clinical diagnostics, environmental monitoring and remediation.     

Post‐chemiluminescence determination of chloramphenicol based on luminol–potassium periodate system

A post‐chemiluminescence (PCL) phenomenon was observed when chloramphenicol was injected into a mixture of luminol and potassium periodate after the chemiluminescence (CL) reaction of luminol–potassium periodate had finished. The possible reaction mechanism was proposed based on studies of the CL kinetic characteristics, the CL spectra, the fluorescence spectra and the UV‐vis absorption spectra of the related substances. Based on the PCL reaction, a rapid and sensitive method for the determination of chloramphenicol was established. The linear response range was 6.0 × 10^?7–1.0 × 10^?5 mol/L, with a correlation coefficient of 0.9986. The relative standard deviation (RSD) for 5.0 × 10^?6 mol/L chloramphenicol was 2.3% (n = 11). The detection limit was 1.6 × 10^?7 mol/L. The method has been applied to the determination of chloramphenicol in pharmaceutical samples with satisfactory results. Copyright © 2011 John Wiley & Sons, Ltd.     

Flow‐injection determination of cysteine in pharmaceuticals based on luminol–persulphate chemiluminescence detection

A flow injection (FI) method is reported for the determination of l‐ cysteine, based on its enhancement on chemiluminescence (CL) emission of luminol oxidized by sodium persulphate in alkaline solution. The calibration graph was linear over the range 1.0 × 10^–9–5.0 × 10^–7 mol/L (r² = 0.9992), with relative standard deviations (RSDs) in the range 1.1–2.3% (n = 4). The limit of detection (3σ blank) was 5.0 × 10^–10 mol/L with a sample throughput of 120/h. The method was applied to pharmaceuticals and the results obtained were in reasonable agreement with the amount labelled. The proposed method was also applied to cysteine in synthetic amino acid mixtures. Calibration graphs of N‐acetylcysteine and glutathione over the range 1.0–50 × 10^–8 and 0.5–7.5 × 10^–7 mol/L were also established (r² = 0.998 and 0.9986) with RSDs in the range 1.0–2.0% (n = 4), and the limits of detection (3σ blank) were 5.0 × 10^–9 and 1.0 × 10^–8 mol/L, respectively. Copyright © 2008 John Wiley & Sons, Ltd.