Methodological problems of direct bioluminescent ADP assay in platelets and erythrocytes

We have developed a method for ADP bioluminescent measurement in platelets and erythrocytes which complements our previous method for ATP assay. When the different parameters of the system under investigation are taken into account, a linea range between 10(-9) and 10(-7) g/ml can be obtained without incubation or troublesome extraction. This makes the method easy and useful for identifying any disease-induced alterations in ATP and/or ADP levels in these blood cells. The data obtained correlate well with those of a bioluminescent method requiring extraction with ethanol/EDTA and incubation, giving the reference intervals of 3.5-5.5 mumol/10(11) PLT for ATP determination and 1.9-3.7 mumol/10(11) PLT for ADP determination in platelets, and 3.2-3.8 mumol/g Hgb for ATP determination and 0.56-0.73 mumol/g Hgb for ADP in erythrocytes. This assay was applied to quality control on blood bags in transfusion centers and proved to be a rapid and reliable method for testing the viability of stored blood cells.     

Enhanced firefly bioluminescence assay of ATP in the presence of ATP extractants by using diethylaminoethyl-dextran

A highly sensitive ATP bioluminescence assay with diethylaminoethyl-dextran (DEAE-Dx) in the presence of ATP extractants such as trichloroacetic acid (TCA) and Triton X-100 is described. These ATP extractants inhibited the activity of firefly luciferase, resulting in a remarkable decrease in the intensity of light emission. However, DEAE-Dx enhanced the intensity of light emission as long as firefly luciferase was active in the presence of the ATP extractants. When DEAE-Dx was used for the assay, the detection limits for ATP in the presence of TCA and Triton X-100 were 0.3 and 0.5 pM, respectively, in aqueous ATP standard solution. The detection limit in the presence of DEAE-Dx was improved 13- to 20-fold compared to that in the absence of DEAE-Dx. The method was applied to the determination of ATP in Escherichia coli extracts. When a 5% solution of TCA was used for the extraction of ATP from E. coli cells, the detection limit corresponded to 250 cells ml(-1) of E. coli.     

Comparison of properties of commercially available crystalline native and recombinant firefly luciferases

Commercially available crystalline native and recombinant firefly luciferases were compared. The two types of luciferase had indistinguishable responses to variation in ATP and luciferin concentrations and to omission of reaction components. The time courses of light production, the responses to nucleotide analogues, and the stability of the enzymes under several storage conditions were identical. The native enzyme had a slightly greater specific activity and was more sensitive to trypsin degradation. These differeces are probably attributable to differences in conformation.     

Bacteriophage-based biosorbents coupled with bioluminescent ATP assay for rapid concentration and detection of Escherichia coli

Wild type T4 bacteriophage and recombinant T4 bacteriophages displaying biotin binding peptide (BCCP) and cellulose binding module (CBM) on their heads were immobilized on nano-aluminum fiber-based filter (Disruptor™), streptavidin magnetic beads and microcrystalline cellulose, respectively. Infectivity of the immobilized phages was investigated by monitoring the phage-mediated growth inhibition of bioluminescent E. coli B and cell lysis using bioluminescent ATP assay. The results showed that phage immobilization resulted in a partial loss of infectivity as compared with the free phage. Nevertheless, the use of a biosorbent based on T4 bacteriophage immobilized on Disruptor™ filter coupled with a bioluminescent ATP assay allowed simultaneous concentration and detection of as low as 6 × 10³ cfu/mL of E. coli in the sample within 2 h with high accuracy (CV = 1-5% in log scale). Excess of interfering microflora at levels 60-fold greater than the target organism did not affect the results when bacteriophage was immobilized on the filter prior to concentration of bacterial cells.     

The effect of fluidic conditions on the continuous-flow bioluminescent detection of ATP in a microfluidic device

The effect of fluidic conditions on the bioluminescent detection of ATP in a microfluidic device was surveyed using homemade detector system. The bioluminescent reaction of ATP was directly affected by the retention time and flow rates of the solutions in this diffusion-based mixing and reaction system due to the laminar flow in the microchannel. ATP and enzyme solutions were separately injected into the microfluidic device at different flow rates through 3 inlet ports. The ATP solution was injected through the middle port, while the enzyme solution was injected in the two remaining ports. When the ratio of ATP to enzyme solution was fixed, the optimum flow rates of enzyme, ATP, and enzyme solution was 3.5, 8.0, and 3.5 μL/min, respectively. The optimal total flow rate was 15 μL/min. The detection limit for the concentration of ATP at optimal conditions was less than 10⁻⁷ M.     

在大肠杆菌中合成的萤火虫荧光素酶的分离和性质

用生物工程技术将萤火虫荧光素酶基因转移到大肠杆菌,在大肠杆菌中合成荧光素酶。这种工程菌已可通过发酵大量培养,并从菌体分离得到接近纯化的荧光素酶。这种酶的分子量是103kD;巯基试剂5,5’-巯基-2(2-硝基苯甲酸)“DTNB”能抑制酶的活性;对于底物荧光素的K_m为1.2μmol/L;酶反应最适pH为7.77;酶催化的生物发光峰在560nm。     

Bioluminometric assay of ATP in mouse brain: Determinant factors for enhanced test sensitivity

Firefly luciferase bioluminescence (FLB) is a highly sensitive and specific method for the analysis of adenosine-5-triphosphate (ATP) in biological samples. Earlier attempts to modify the FLB test for enhanced sensitivity have been typically based onin vitro cell systems. This study reports an optimized FLB procedure for the analysis of ATP in small tissue samples. The results showed that the sensitivity of the FLB test can be enhanced several fold by using ultraturax homogenizer, perchloric acid extraction, neutralization of acid extract and its optimal dilution, before performing the assay reaction.     

Quenching of the fluorescence of Tyr and Trp residues of firefly luciferase from <Emphasis Type="Italic">Luciola mingrelica</Emphasis> by the substrates

Luciferase of the firefly Luciola mingrelica is characterized by fluorescence of not only the unique Trp residue (lambda(em) = 340 nm), but also that of Tyr residues (lambda(em) = 308 nm). Quenching of the intrinsic fluorescence of the luciferase by its substrates luciferin and ATP (AMP) has been studied. Luciferin (LH2) quenches Trp fluorescence more efficiently than the fluorescence of Tyr residues. Two centers of quenching of Tyr fluorescence by ATP have been found corresponding apparently to the allosteric and active sites of the luciferase with K(s(ATP)) = 20 and 110 microM, respectively. The influence of one substrate on the affinity of luciferase to the second was investigated using fluorescence. ATP (AMP) binding to the allosteric sites of the luciferase significantly affects the affinity of luciferase to LH2. Formation of the complex between the luciferase and LH2 affects the affinity of both allosteric and active sites of the luciferase to ATP (AMP). The observed effects are probably connected with conformational changes in the luciferase molecule upon its interaction with the substrates.     

Enhanced microbial biomass assay using mutant luciferase resistant to benzalkonium chloride

In a biomass assay based on adenosine 5(')-triphosphate (ATP) bioluminescence, extracellular ATP is removed; then intracellular ATP is extracted from the microorganism by an ATP extractant and subsequently reacted with luciferase. To provide a highly sensitive assay, the concentration of benzalkonium chloride (BAC) in the ATP extractant was optimized by using a mutant luciferase resistant to BAC. The use of 0.2% BAC, which was acceptable for the luciferase, simultaneously achieved the maximum extraction of intracellular ATP from microorganisms and the inactivation of the ATP-eliminating enzymes for removal of extracellular ATP. The detection limit (blank+3 SD) for ATP was 1.8x10(-14)M (1.8x10(-18)mol/assay) in the presence of the ATP extractant with coefficients of variation of 0.7 to 6.3%. The reagent system coupled with the ATP-eliminating enzymes allowed for the detection of 93 colony-forming units (CFU)/ml of Escherichia coli ATCC 25922, 170CFU/ml of Pseudomonas aeruginosa ATCC 27853, 170CFU/ml of Proteus mirabilis ATCC 29906, 68CFU/ml of Staphylococcus aureus ATCC 25923, and 7.7CFU/ml of Bacillus subtilis ATCC 6051. The yeast cell of Saccharomyces cerevisiae IFO 10217 could be detected at 1CFU/ml. With 54 kinds of microorganisms, the average ATP extraction efficiency compared to the trichloroacetic acid extraction method was 81.0% in 24 strains among gram-negative bacteria, 99.4% in 13 strains among gram-positive bacteria, and 97.0% in 17 strains among yeast. The ATP contents of the gram-negative bacteria, gram-positive bacteria, and yeasts ranged from 0.40 to 2.70x10(-18)mol/CFU (mean=1.5x10(-18)mol/CFU), from 0.41 to 16.7x10(-18)mol/CFU (mean=5.5x10(-18)mol/CFU), and from 0.714 to 54.6x10(-16)mol/CFU (mean=8.00x10(-16)mol/CFU), respectively.     

Characterization of an ATP diphosphohydrolase activity (APYRASE,EC 3.6.1.5) in rat blood platelets

In the present report we describe an apyrase (ATP diphosphohydrolase, EC 3.6.1.5) in rat blood platelets. The enzyme hydrolyses almost identically quite different nucleoside di- and triphosphates. The calcium dependence and pH requirement were the same for the hydrolysis of ATP and ADP and the apparent Km values were similar for both Ca²⁺-ATP and Ca²⁺-ADP as substrates. Ca²⁺-ATP and Ca²⁺-ADP hydrolysis could not be attributed to the combined action of different enzymes because adenylate kinase, inorganic pyrophosphatase and nonspecific phosphatases were not detected under our assay conditions. The Ca²⁺-ATPase and Ca²⁺-ADPase activity was insensitive to ATPase, adenylate kinase and alkaline phosphatase classical inhibitors, thus excluding these enzymes as contaminants. The results demonstrate that rat blood platelets contain an ATP diphosphohydrolase involved in the hydrolysis of ATP and ADP which are vasoactive and platelet active adenine nucleotides.     

A review of bioluminescent ATP techniques in rapid microbiology

Use of firefly luciferase to assay adenosine triphosphate (ATP) extracted from microorganisms provides an easy means to enumerate microbes within minutes. The small amount of light produced is proportional to ATP and thus microbial number. The average bacterium contains around 10^?15 g ATP per cell. Present reagents permit detection of 10³ cells per tube. Luminometers currently on the market detect about 10^?12 g ATP. Proper extraction of ATP from the microbes is an essential part of any protocol, as is the removal of non-microbial ATP from, for example, somatic cells also present in samples. The technique may be applied to a wide range of samples, for example food and beverages and clinical samples such as urine. The ATP assay gives a global measure of microbial numbers, i.e. it is not species specific unless a species separation step is included in the protocol.     

Synthesis and Antimicrobial Activity of Chiral cis-Cycloheximide Isomers

Such (+)- and (?)-cis-cycloheximide isomers as isocyclohcximide (1a, 1b), α-epiisocycloheximide (2a, 2b) and neocycloheximide (3a, 3b) were synthesized by aldol condensation of (?)-(2R, 4R)- and (+)-(2S, 4S)-cis-2,4-dimethyl-1-cyclohexanone (5a, 5b). obtained by microbial resolution, with 4-(2-oxoethyl)-2,6-piperidinedione (7). The absolute configuration of the (?)-cis-ketone 5a was confirmed by chemical correlation with natural (2S, 4S, 6S, αR)-cycloheximide (4). The newly synthesized isomer, (?)-α-epiisocycloheximide (2b), showed strong antimicrobial activity against S. cerevisiae andP. oryzae close to that of natural cycloheximide (4).     

Bioluminescence Spectra of Native and Mutant Firefly Luciferases as a Function of pH

Bioluminescence spectra of the wild-type recombinant Luciola mingrelica firefly luciferase and its mutant form with the His433Tyr point mutation were obtained within the pH 5.6-10.2 interval. The spectra are shown to be a superposition of the spectra of the three forms of the electronically excited reaction product oxyluciferin: ketone (lambdamax = 618 nm), enol (lambdamax = 587 nm), and enolate-ion (lambdamax = 556 nm). The shift in lambdamax by 40 nm to the red region in the mutant luciferase bioluminescence at the pH optimum of enzyme activity (pH 7.8) is explained by the change in the relative content of different oxyluciferin forms due to the shift in the ketone <--> enol <--> enolate equilibria. A computer model of the luciferase-oxyluciferin-AMP complex was constructed and the structure of amino acid residues participating in the equilibrium is proposed. Computer models of the protein region near the His433 residue for the wild type and mutant luciferases are also proposed. Comparison of the models shows that the His433Tyr mutation increases flexibility of the polypeptide loop that binds the N and C domains of luciferase. As a result, the flexibility of the C domain amino acid residues in the emitter microenvironment increases, and this increase may be the reason for the observed differences in the bioluminescence spectra of the native and mutant luciferases.     

Individual variation of nucleoside triphosphate pyrophosphohydrolase activity in human erythrocytes,granulocytes, lymphocytes,and platelets

Analysis of the nucleoside triphosphate pyrophosphohydrolase specific activity of red cells obtained from a random Caucasian population indicated at least two subclasses. The specific activity of 18% of the population ranged from undetectable activity to 27.5 nmol ITP cleaved/20 min/mg hemoglobin. The remainder of the population had higher activity, 27.5–125 nmoles ITP cleaved/20 min/mg hemoglobin. The variation of NTPH activity evident in the red cells of an individual is reflected in granulocytes, lymphocytes, and platelets of that individual. Erythrocyte activity ranges from 0.7 to 21 units (nmol of ITP cleaved in 20 min)/10⁷ cells, granulocytes have 17–201 units/10⁷ cells, lymphocytes have 91–462 units/10⁷ cells, and platelets have 1.1–7.1 units/10⁷ platelets. These cell differences are discussed with respect to the hypothesis that NTPH prevents incorporation of ITP or dITP into nucleic acids.This work was supported by funds allocated by the Agricultural Experiment Station, Michigan State University. Michigan Agricultural Experiment Station Journal No. 8727.     

Detection of viable fungal spores contaminant on documents and rapid control of the effectiveness of an ethylene oxide disinfection using ATP assay

Filamentous fungi are able to damage and even destroy archival and library materials. Nowadays the conventional method for detecting such micro‐organisms is to put them in cultures but such methods are laborious and time‐consuming. ATP methodology has been widely applied in other domains and its success on bacteria and yeast has been demonstrated. Several commercial reagent kits are available but they did not give satisfactory results on spores mould. We have elaborated new extraction strategies specific to fungi. A comparison of 42 extraction protocols of ATP from fungal spores was carried out. Extraction at 100°C with DMSO 90% in a Tris–acetate–EDTA buffer proved to be the best method. The viability of cells is estimated by the determination of adenylate energy charge (EC). We applied our method successfully on well‐known species such as Aspergillus flavus, A. niger, A. fumigatus, A. versicolor, Neosartorya fischeri, Eurotium chevalieri, Penicillium chrysogenum, Chaetomium globosum and Ulocladium spp. The results suggest that the ATP bioluminescence assay provides a sensitive and time‐saving method for detecting viable fungal spores. The validity of the procedure was also tested on spores killed by steam and on spores treated with ethylene oxide. We showed that EC determination could be used for a rapid control of the effectiveness of a disinfection process performed with ethylene oxide. Copyright © 2003 John Wiley & Sons, Ltd.     

Use of Firefly Luciferase for ATP Measurement: Other Nucleotides Enhance Turnover

Firefly luciferase utilizes only ATP and a few closely related nucleotides as substrates for the formation of luciferyl adenylate which is an intermediate in the bioluminescent reaction sequence that oxidizes firefly luciferin. The enzyme shows two different time courses of light production depending on ATP concentration used: a flash with high concentrations of ATP (>8μM) or a fairly constant production of light with lower concentrations of ATP (< 1 μM). Many nucleotides, nucleotide-containing substances and other compounds, when added either prior to or 1 min after the addition of ATP, change the time course of light production. When added before ATP, these compounds yield a reaction mixture in which light production is fairly constant (at the level characteristic of the flash observed with that ATP concentration). When the compounds are added after ATP addition, light production is markedly stimulated and the higher rate of light production is maintained for several minutes. There is an increase in quanta of light produced per luciferase dimer from 1 to 5/min with the addition of any of several nucleotide analogues. These results are consistent with a stimulated release of the inhibitory product oxyluciferin, allowing turnover of the enzyme. This enzyme turnover permits more light output at high ATP concentrations, thus enhancing the sensitivity of enzyme determination.     

Kinetics of bactericidal activity of antibiotics measured by luciferin-luciferase assay

ATP production, measured by the luciferin-luciferase assay, is an indicator of bacterial metabolic activity. This enzymatic assay yields rapid results (< 5 minutes), permitting multiple measurements and establishment of ATP growth curves in order to study the kinetics of antibiotics in bacterial populations. The measurement of free or extracellular ATP, total ATP (extra and intracellular) and the ratio of free to total ATP are additional means of studying the bacteriostatic or bactericidal activity of antibiotics. An increase in free ATP is an indicator of extracellular movement due to alteration of the cell wall. The ratio free ATP/total ATP × 100 ≥ 50%, indicates bacteriallysis. These assays were used to study the effects of 14 antibiotics on two reference strains of Escherichia coli ATCC 25922 and Staphylococcus aureus 25923.     

Bioluminescent assay of ATPase activity in embryonic material using firefly luciferase

The continuous bioluminescent assay of ATP has been adapted to the study of Mg²⁺-dependent ATPases, including the (Na⁺,K⁺) pump, in amphibian tissues. A discrete bioluminescent assay procedure for ATPase has also been developed. Components of the firefly luciferase assay reagent modify the observed ATPase activity but this can be circumvented by performing discrete instead of continuous measurements of enzyme activity. In assays with commercial ATPase preparations the continuous bioluminescent assay procedure gave ATPase activities 2.2-fold lower than obtained with the discrete procedure. In Xenopus oocyte or egg homogenates, in contrast, the total ATPase activity measured is stimulated eight times by the luciferase reagent, mainly through an unexplained activation of a Mg²⁺-independent ATPase. In other tissues, such as Xenopus brain homogenates, both the continuous and discrete monitoring procedures are equally suitable for the determination of ATPase activity.     

Use of ATP to characterize biomass viability in freely suspended and immobilized cell bioreactors

This work describes investigations into the viability of cells growing on 3,4-dichloroaniline (34DCA). Two bioreactors are employed for microbial growth, a continuous stirred tank (CST) bioreactor with a 2-L working volume, and a three-phase air lift (TPAL) bioreactor with a 3-L working volume. Experiments have been performed at several dilution rates between 0.027 and 0.115 h(-1) in the CST bioreactor and between 0.111 and 0.500 h(-1) in the TPAL bioreactor. The specific ATP concentration was calculated at each dilution rate in the suspended biomass in both bioreactors as well as in the immobilized biomass in the TPAL bioreactor. The ATP was extracted from the cells using boiling tris-EDTA buffer (pH 7.75), and the quantity determined using a firefly (bioluminescence) technique. The cultures were inspected under an electron microscope to monitor compositional changes. Results from the CST bioreactor showed that the biomass-specific ATP concentration increases from 0.44 to 1.86 mg ATP g(-1) dry weight (dw) as dilution rate increases from 0.027 to 0.115 h(-1). At this upper dilution rate the cells were washed out. The specific ATP concentration reached a limiting average value of 1.73 mg ATP g(-1) dw, which is assumed to be the quantity of ATP in 100% viable biomass. In the TPAL bioreactor, the ATP level increased with dilution rate in both the immobilized and suspended biomass. The specific ATP concentration in the immobilized biomass increased from approximately 0.051 mg ATP g(-1) dw at dilution rates between 0.111 and 0.200 h(-1) to approximately 0.119 mg ATP g(-1) dw at dilution rates between 0.300 and 0.500 h(-1). This indicates that the immobilized biomass contained a viable cell fraction of around 5%. Based on these results, kinetic data for freely suspended cells should not be applied to the modeling of immobilized cell systems on the assumption that immobilized biomass is 100% viable. (c) 1993 John Wiley & Sons, Inc.