A polymorphic alpha satellite sequence specific for human chromosome 13 detected by oligonucleotide primed in situ labelling (PRINS)

The centromeric alpha satellite DNA subfamilies from chromosomes 13 and 21 are almost identical in sequence and cannot be easily distinguished by mean of probes for Southern blot or in situ hybridisation. We have used the oligonucleotide-primed in situ (PRINS) labelling technique with primers defined from the alpha satellite sequence of chromosome 13. One primer was found to label specifically the centromeric region of chromosomes 13 and allowed the detection of a polymorphism between two chromosome 13 homologues in one individual.     

Rapid detection of chromosome X,Y, 13, 18, and 21 aneuploidies by primed in situ labeling/synthesis technique

AIMS AND OBJECTIVE:

Primed in situ labeling/synthesis (PRINS) technique is an alternative to fluorescent in situ hybridization for chromosome analysis. This study was designed to evaluate the application of PRINS for rapid diagnosis of common chromosomal aneuploidy.

MATERIALS AND METHODS:

We have carried out PRINS using centromere specific oligonucleotide primers for chromosome X, Y, 13, 18 and 21 on lymphocyte metaphase and interphase cells spread. Specific primer was annealed in situ, followed by elongation of primer by Taq DNA polymerase in presence of labeled nucleotides. Finally, reaction was stopped and visualized directly under fluorescent microscope.

RESULTS:

Discrete centromere specific signals were observed with each primer.

CONCLUSION:

PRINS seems to be a rapid and reliable method to detect common chromosome aneuploidy in peripheral blood lymphocyte metaphase and interphase cells.     

Organization and evolution of an alpha satellite DNA subset shared by human chromosomes 13 and 21

The structure of the alpha satellite DNA higher-order repeat (HOR) unit from a subset shared by human chromosomes 13 and 21 (D13Z1 and D21Z1) has been examined in detail. By using a panel of hybrids possessing either a chromosome 13 or a chromosome 21, different HOR unit genotypes on chromosomes 13 and 21 have been distinguished. We have also determined the basis for a variant HOR unit structure found on 8% of chromosomes 13 but not at all on chromosomes 21. Genomic restriction maps of the HOR units found on the two chromosome 13 genotypes and on the chromosome 21 genotype are constructed and compared. The nucleotide sequence of a predominant 1.9-kilobasepair HOR unit from the D13Z1/D21Z1 subset has been determined. The DNA sequences of different alpha satellite monomers comprising the HOR are compared, and the data are used to develop a model, based on unequal crossing-over, for the evolution of the current HOR unit found at the centromeres of both these chromosomes.Correspondence to: H.F. Willard     

DNA primase-DNA polymerase alpha from simian cells: sequence specificity of initiation sites on simian virus 40 DNA.

Unique single-stranded regions of simian virus 40 DNA, phage M13 virion DNA, and several homopolymers were used as templates for the synthesis of (p)ppRNA-DNA chains by CV-1 cell DNA primase-DNA polymerase alpha. Intact RNA primers, specifically labeled with an RNA capping enzyme, were typically 6 to 8 ribonucleotides long, although their lengths ranged from 1 to 9 bases. The fraction of intact RNA primers 1 to 4 ribonucleotides long was 14 to 73%, depending on the template used. RNA primer length varied among primers initiated at the same nucleotide, as well as with primers initiated at different sites. Thus, the size of an RNA primer depended on template sequence. Initiation sites were identified by mapping 5' ends of nascent RNA-DNA chains on the template sequence, identifying the 5'-terminal ribonucleotide, and partially sequencing one RNA primer. A total of 56 initiation events were identified on simian virus 40 DNA, an average of 1 every 16 bases. Some sites were preferred over others. A consensus sequence for initiation sites consisted of either 3'-dCTTT or 3'-dCCC centered within 7 to 25 pyrimidine-rich residues; the 5' ends of RNA primers were complementary to the dT or dC. High ATP/GTP ratios promoted initiation of RNA primer synthesis at 3'-dCTTT sites, whereas low ATP/GTP ratios promoted initiation at 3'-dCCC sites. Similarly, polydeoxythymidylic acid and polydeoxycytidylic acid were the only effective homopolymer templates. Thus, both template sequence and ribonucleoside triphosphate concentrations determine which initiation sites are used by DNA primase-DNA polymerase alpha. Remarkably, initiation sites selected in vitro were strikingly different from initiation sites selected during simian virus 40 DNA replication in vivo.     

PRINS as a method for rapid chromosomal labeling on human spermatozoa

Direct in situ labeling of human spermatozoa was performed using the PRINS method. This technique is based on annealing of specific oligonucleotide primers, and subsequent primer extension by a Taq DNA polymerase. The reaction was carried out on a programmable temperature cycler, and labeling was obtained in a 1-hr reaction. The method was successfully tested with specific primers for chromosomes 13, 16, and 21. This suggests that PRINS may be a fast and reliable technique for detecting aneuploidies. © 1995 Wiley-Liss Inc.     

Synthesis and application of circularizable ligation probes

We describe a PCR-based approach for the synthesis of circularizable ligation probes (CLiPs). CLiPs are single-stranded probes that consist of target-specific ends separated by a noncomplementary "linker" sequence. When hybridized to a target, the CLiP forms a nicked circle that may be sealed by DNA ligase only if the 5' and 3' ends show perfect Watson-Crick base pairing, thus enabling the discrimination of single nucleotide polymorphisms. Primers incorporating target sequence at their 5' end and plasmid sequence at the 3' end were used in a PCR amplification. In addition, the antisense primer was 5' labeled with biotin, and the amplification was performed in the presence of fluorescently labeled dUTP. The resulting PCR product was captured with streptavidin-coated paramagnetic beads, and the top strand, which forms the CLiP, was alkali eluted. This PCR-based method has allowed the synthesis of CLiPs that are larger and more highly labeled than has previously been possible, with ligation efficiencies similar to those of the purest chemically synthesized padlock probes. Ligations performed in the presence of cognate or mismatched sequence were analyzed by denaturing PAGE using a fluorescent DNA sequencer. Genotyping using target immobilized to nylon membranes was also performed. The CLiPs were readily able to distinguish between mutant and wild-type alleles for the common genetic disorder, 21-hydroxylase deficiency. Additionally, CLiPs of different lengths were synthesized and compared.     

Annealing control primer system for improving specificity of PCR amplification

A novel primer designed to improve the specificity of PCR amplification, called the annealing control primer (ACP), comprises a tripartite structure with a polydeoxyinosine [poly(dI)] linker between the 3' end target core sequence and the 5' end nontarget universal sequence. We show that this ACP linker prevents annealing of the 5' end nontarget sequence to the template and facilitates primer hybridization at the 3' end to the target sequence at specific temperatures, resulting in a dramatic improvement of annealing specificity. The effect of this linker is demonstrated by the incorporation of ACP sequences as primers during the amplification of target nucleotide sequence and as hybridization probes in the genotyping of single nucleotide polymorphisms. This is the first report to show that a poly(dI) linker between two different sequences of ACP forms a bubble-like structure and disrupts or destabilizes DNA duplex formation at certain annealing temperatures.     

The anchor site of telomerase from Euplotes aediculatus revealed by photo-cross-linking to single- and double-stranded DNA primers.

Telomerase is a ribonucleoprotein enzyme that adds telomeric sequence repeats to the ends of linear chromosomes. In vitro, telomerase has been observed to add repeats to a DNA oligonucleotide primer in a processive manner, leading to the postulation of a DNA anchor site separate from the catalytic site of the enzyme. We have substituted photoreactive 5-iododeoxypyrimidines into the DNA oligonucleotide primer d(T4G4T4G4T4G2) and, upon irradiation, obtained cross-links with the anchor site of telomerase from Euplotes aediculatus nuclear extract. No cross-linking occurred with a primer having the same 5' end and a nontelomeric 3' end. These cross-links were shown to be between the DNA primer and (i) a protein moiety of approximately 130 kDa and (ii) U51-U52 of the telomerase RNA. The cross-linked primer could be extended by telomerase in the presence of [alpha-32P]dGTP, thus indicating that the 3' end was bound in the enzyme active site. The locations of the cross-links within the single-stranded primers were 20 to 22 nucleotides upstream of the 3' end, providing a measure of the length of DNA required to span the telomerase active and anchor sites. When the single-stranded primers are aligned with the G-rich strand of a Euplotes telomere, the cross-linked nucleotides correspond to the duplex region. Consistent with this finding, a cross-link to telomerase was obtained by substitution of 5-iododeoxycytidine into the CA strand of the duplex region of telomere analogs. We conclude that the anchor site in the approximately 130-kDa protein can bind duplex as well as single-stranded DNA, which may be critical for its function at chromosome ends. Quantitation of the processivity with single-stranded DNA primers and double-stranded primers with 3' tails showed that only 60% of the primer remains bound after each repeat addition.     

Localization of the large subunit of replication factor C near the 5' end of DNA primers

Replication factor C (RFC) is a heteropentameric sliding clamp loader protein essential for processive synthesis of DNA by eukaryotic DNA polymerases delta and epsilon. To study the interaction of RFC with 3' and 5' ends of the DNA primer, we have developed chemical photocrosslinking assay using a synthetic DNA gap and DNA primer-template structures. We have found that the radioactively labeled primers containing a photoreactive group at their 5' end could crosslink with the largest RFC subunit (RFC140) on primer-templates and DNA gap structures, but that 3' end photoreactive primers could only crosslink with RFC140 within the DNA gap structure. Addition of replication protein A (RPA) to the reaction mixture resulted in the crosslinking of RPA subunits and inhibited crosslinking of RFC140 using 3' but not 5' photoreactive primers present at the gap. The results suggest specific contacts between RFC140 and the 5' end of the DNA primer. Together with previous data, these experiments allow us to propose a model for the DNA polymerase switch during eukaryotic DNA replication.     

Molecular cytogenetic characterization of 17 rob(13q14q) Robertsonian translocations by FISH, narrowing the region containing the breakpoints.

We have characterized 17 rob(13q14q) Robertsonian translocations, using six molecular probes that hybridize to the repetitive sequences of the centromeric and shortarm regions of the five acrocentric chromosomes by FISH. The rearrangements include six de novo rearrangements and the chromosomally normal parents, five maternally and three paternally inherited translocations, and three translocations of unknown origin. The D21Z1/D13Z1 and D14Z1/D22Z1 centromeric alpha-satellite DNA probes showed all rob(13q14q) chromosomes to be dicentric. The rDNA probes did not show hybridization on any of the 17 cases studied. The pTRS-47 satellite III DNA probe specific for chromosomes 14 and 22 was retained around the breakpoints in all cases. However, the pTRS-63 satellite III DNA probe specific for chromosome 14 did not show any signals on the translocation chromosomes examined. In 16 of 17 translocations studied, strong hybridization signals on the translocations were detected with the pTRI-6 satellite I DNA probe specific for chromosome 13. All parents of the six de novo rob(13q14q), including one whose pTRI-6 sequence was lost, showed strong positive hybridization signals on each pair of chromosomes 14 and 13, with pTRS-47, pTRS-63, and pTRI-6. Therefore, the translocation breakpoints in the majority of rob(13q14q) are between the pTRS-47 and pTRS-63 sequences in the p11 region of chromosome 14 and between the pTRI-6 and rDNA sequences within the p11 region of chromosome 13.     

Specific-primer-directed DNA sequencing

A simple and rapid strategy for DNA sequence analysis based on the Sanger chain-termination method is described. This procedure utilizes full-sized inserts of 1 to 4 kb of DNA cloned into M13 bacteriophage vectors. After the sequence of the first 600-650 bp of the insert DNA has been determined with the commercially available universal vector primer, a specific oligonucleotide is synthesized utilizing the sequence data obtained from the 3' end of the sequence and used as a primer to extend the sequence analysis for another 600-650 nucleotides. Additional primers are synthesized in a similar manner until the nucleotide sequence of the entire insert DNA has been determined. General guidelines for the selection of oligonucleotide length and composition and the use of unpurified primers are discussed. The use of the specific-primer-directed approach to dideoxynucleotide sequence analysis, in association with highly purified single-stranded template DNA, reduces considerably the time required for the analysis of large segments of DNA.     

An improved method for chromosome-specific labeling of alpha satellite DNA in situ by using denatured double-stranded DNA probes as primers in a primed in situ labeling (PRINS) procedure.

An improved primed in situ labeling (PRINS) procedure that provides fast, highly sensitive, and nonradioactive cytogenetic localization of chromosome-specific tandem repeat sequences is presented. The PRINS technique is based on the sequence-specific annealing in situ of unlabeled DNA. This DNA then serves as primer for chain elongation in situ catalyzed by a DNA polymerase. If biotin-labeled nucleotides are used as substrate for the chain elongation, the hybridization site becomes labeled with biotin. The biotin is subsequently made visible through the binding of FITC-labeled avidin. Tandem repeat sequences may be detected in a few hours with synthetic oligonucleotides as primers, but specific labeling of single chromosomes is not easily obtained. This may be achieved, however, if denatured double-stranded DNA fragments from polymerase-chain-reaction products or cloned probes are used as primers. In the latter case, single chromosome pairs are stained with a speed and ease (1 h reaction and no probe labeling) that are superior to traditional in situ hybridization. Subsequent high-quality Q banding of the chromosomes is also possible. The developments described here extends the range of applications of the PRINS technique, so that it now can operate with any type of probe that is available for traditional in situ hybridization.     

Uracil DNA glycosylase-mediated cloning of polymerase chain reaction-amplified DNA: application to genomic and cDNA cloning.

A simple and rapid method for cloning of amplification products directly from the polymerase chain reaction (PCR) has been developed. The method is based on the addition of a 12-base dUMP-containing sequence (CUACUACUACUA) to the 5' end of PCR primers. Incorporation of these primers during PCR results in the selective placement of dUMP residues into the 5' end of amplification products. Selective degradation of the dUMP residues in the PCR products with uracil DNA glycosylase (UDG) disrupts base pairing at the termini and generates 3' overhangs. Annealing of 3' protruding termini to vector DNA containing complementary 3' ends results in chimeric molecules which can be transformed, with high efficiency, without in vitro ligation. Directional cloning of PCR products has also been accomplished by incorporating different dU-containing sequences at the end of each PCR primer. Substitution of all dT residues in PCR primers with dU eliminates cloning of aberrant "primer dimer" products and enriches cloning of genuine PCR products. The method has been applied to cloning of inter-Alu DNA sequences from human placental DNA. Using a single primer, DNA sequences between appropriately oriented Alu sequences were amplified and cloned. Cloning of cDNA for the glyceraldehyde-3'-phosphate dehydrogenase gene from rat brain RNA was also demonstrated. The 3' end region of this gene was amplified by the 3' RACE method and the amplified DNA was cloned after UDG digestion. Characterization of cloned DNAs by sequence analysis showed accurate repair of the cloning junctions. The ligase-free cloning method with UDG should prove to be a widely applicable procedure for rapid cloning of PCR-amplified DNA.     

In situ amplification using universal energy transfer-labeled primers.

We developed an amplification detection system in which a universal energy transfer-labeled primer (UniPrimer) is used in combination with any target-specific primer pair. The target specific primers each have a 5' tail sequence, which is homologous to the 3' end of the UniPrimer which, in turn, has a hairpin structure on the 5' end. The hairpin structure brings the fluorophore and quencher into close proximity when the primer is free in solution, providing efficient quenching. When the primer is incorporated into the PCR product, the hairpin structure is unfolded and a fluorescent signal can be detected. Using hepatitis C and human papillomavirus as model systems, this study demonstrates several advantages in the hot-start in situ PCR technique with the UniPrimer system, including target specific detection of one DNA copy per cell without a separate in situ hybridization step and detection of an RNA target by RT in situ PCR without overnight DNase digestion. The UniPrimer-based in situ PCR allows rapid and simple detection of any DNA or RNA target without concern for the background from DNA repair invariably evident in paraffin-embedded tissue when a labeled nucleotide is used.     

Creating a new color by omission of 3′ end blocking step for simultaneous detection of different chromosomes in multi-PRINS technique

In the multiple color primed in situ labeling (multi-PRINS) technique, the blocking step using ddNTPs, incorporated by a DNA polymerase, is an important procedure that blocks the free 3' end generated in the previous PRINS reaction, thus avoiding the next PRINS reaction using it as a primer to perform spurious elongation at non-desired sites. However, we found that omission of the blocking step never affected the correct identification of two chromosomes because the signals from the second PRINS reaction site always showed the pure original color. Nevertheless, taking advantage of the color mixing, we successfully used a multi-PRINS technique to create a third color using the two most common forms of labeled dUTP (biotin- and digoxigenin-labeled dUTP) and two fluorochromes (fluorescein and rhodamine) in order simultaneously to detect three chromosomes in the same cell. By arranging the labeling either in bio-dig-bio or in dig-bio-dig order in the sequential PRINS reaction, then detecting with a mixture of avidin-fluorescein/anti-dig-rhodamine or a mixture of anti-dig-fluorescein/avidin-rhodamine, the signals at the centromeres of three different chromosomes displayed perfect yellow, red and green colors, respectively. The entire procedure could be completed in less than 90 min because the blocking step was omitted. We showed that this is a practical and efficient way to carry out multiPRINS so that even more than three chromosome targets could be detected in the same cell.     

Universal fluorescent labeling (UFL) method for automated microsatellite analysis.

We have devised a novel method for automated microsatellite analysis using "universal" fluorescent labeling. This system is based on polymerase chain reactions driven by sequence-specific primers and a reporter primer labeled with a fluorescent dye at its 5' end. The forward sequence-specific primer is designed with a tag region bearing no homology to any human genomic sequence. Complementary tag sequences act as templates for the 6-carboxyfluorescein-labeled reporter primer, and those products can be analyzed with an autosequencer. The results we achieved with this assay system were consistent with the results of conventional assays using radioisotope-labeled primers, and diagnosis required less time. Furthermore, the fluorescent-labeled reporter primer is "universal" in that it can be used with different sequence-specific primers designed to carry the appropriate tag sequence at their 5'-ends. Our observations suggest that the "universal" fluorescent labeling method is an efficient tool for analyzing sequence variations in human DNA.     

Cassette labeling for facile construction of energy transfer fluorescent primers.

DNA primer sets, labeled with two fluorescent dyes to exploit fluorescence energy transfer (ET), can be efficiently excited with a single laser line and emit strong fluorescence at distinctive wavelengths. Such ET primers are superior to single fluorophore-labeled primers for DNA sequencing and other multiple color-based analyses [J. Ju, C. Ruan, C. W. Fuller, A. N. Glazer and R. A. Mathies (1995) Proc. Natl. Acad. Sci. USA 92, 4347-4351]. We describe here a novel method of constructing fluorescent primers using a universal ET cassette that can be incorporated by conventional synthesis at the 5'-end of an oligonucleotide primer of any sequence. In this cassette, the donor and acceptor fluorophores are separated by a polymer spacer (S6) formed by six 1',2'-dideoxyribose phosphate monomers (S). The donor is attached to the 5' side of the ribose spacer and the acceptor to a modified thymidine attached to the 3' end of the ribose spacer in the ET cassette. The resulting primers, labeled with 6-carboxy-fluorescein as the donor and other fluorescein and rhodamine dyes as acceptors, display well-separated acceptor emission spectra with 2-12-fold enhanced fluorescence intensity relative to that of the corresponding single dye-labeled primers. With single- stranded M13mp18DNA as the template, a typical run with these ET primers on a capillary sequencer provides DNA sequences with 99% accuracy in the first 550 bases using the same amount of DNA template as that typically required using a four-color slab gel automated sequencer.     

Anti-primer quenching-based real-time PCR for simplex or multiplex DNA quantification and single-nucleotide polymorphism genotyping

Nucleic acid amplification and detection plays an increasingly important role in genetic analysis of clinical samples, medical diagnostics and drug discovery. We present a new quantitative PCR method that allows versatile and flexible nucleic acid target quantification. One of the PCR primers is modified by an oligonucleotide "tail" fluorescently labeled at the 5' end. An oligonucleotide complementary to this tail, carrying a 3'-quencher ("anti-primer"), is included in the PCR along with the two primers. Following primer extension, the reaction temperature is lowered such that the anti-primer hybridizes to and quenches the fluorescence of only the free primer and not the double-stranded PCR product, allowing real-time fluorescent quantification of the latter. This anti-primer-based quantitative real-time PCR (aQRT-PCR) allows simplex or multiplex quantification or single-nucleotide polymorphism genotyping in clinical samples of widely differing quality (e.g., fresh samples, formalin-fixed paraffin-embedded samples and plasma-circulating DNA) and provides a practical alternative to existing, more expensive approaches. The process of aQRT-PCR takes 1.5-2 h.