A structural basis for enantioselective inhibition of Candida rugosa lipase by long-chain aliphatic alcohols.

Molecular modeling showed that the enantiomers of heptyl 2-methyldecanoate are productively bound to the active site of Candida rugosa lipase in quite different conformations. The fast-reacting S-enantiomer may well occupy the previously identified acyl-binding tunnel in the active site of the lipase. By contrast, the slow-reacting R-enantiomer must be bound to the active site, leaving the tunnel empty to allow the formation of two catalytically essential hydrogen bonds between His 449 of the catalytic triad and the transition state of the catalyzed reaction. This information enables us to propose a molecular mechanism explaining how long-chain aliphatic alcohols act as enantioselective inhibitors of this lipase in the resolution of 2-methyldecanoic acid. Long-chain aliphatic alcohols may coordinate to the acyl-binding tunnel of the C. rugosa lipase, thereby selectively inhibiting the turnover of the fast-reacting S-enantiomer, thus resulting in a lowered enantioselectivity in the resolution.     

Disparity in productive binding mode of the slow-reacting enantiomer determines the novel catalytic behavior of Candida antarctica lipase B

In the context of specifying the origin of enzyme enantioselectivity, the present study explores the lipase enantioselectivity towards secondary alcohols of similar structure from the perspective of substrate binding. By carrying out molecular mechanics minimization as well as molecular dynamics simulation on tetrahedral reaction intermediates which are used as a model of transition state, we identify an unconventional productive binding mode (PBM)—M/H permutation type for Candida antarctica lipase B (CALB). The in silico results also indicate that different PBMs of the slow-reacting enantiomer do exist in one lipase even when there is little structural differences between substrates, e.g. compounds with Ph or CH₂CH₂Ph group display the M/H permutation type PBM while molecules with CH₂Ph show the M/L permutation type PBM. By relating the PBMs of substrates to the experimentally determined E-values obtained by Hoff et al. [16], we find that disparity in PBM of the slow-reacting enantiomer determines why E-values of substrates with CH₂Ph were lower than E-values of substrates with Ph or CH₂CH₂Ph group. The modeling results also suggest that the “pushed aside” effect of the F atom and Br atom accommodates the medium size substituent of the substrate better in the stereospecificity pocket of the enzyme.     

Improving lipase enantioselectivity in organic solvents by forming substrate salts with chiral agents

We recently demonstrated (J Am Chem Soc 121:3334-3340, 1999) that enzymatic enantioselectivity in organic solvents can be markedly enhanced by temporarily enlarging the substrate via salt formation. In the present study, this approach was expanded by finding that, in addition to its size, the stereochemistry of the counterion can greatly affect the enantioselectivity enhancement. For example, the enantioselectivity [E = (k(cat)/K(M))(S)/(k(cat)/K(M))(R)] of crystalline Pseudomonas cepacia lipase in the propanolysis of phenylalanine methyl ester (PheOMe) in anhydrous acetonitrile was found to be 5.8 +/- 0.6; the E value doubled when PheOMe's salt with S mandelic acid was used as a substrate instead of the free ester, and rose sevenfold with R mandelic acid as a Bronsted-Lowry acid. Similar effects were observed with other bulky, but not petite, counterions. The greatest enantioselectivity enhancement was afforded by 10-camphorsulfonic acid: the E value increased to 18 +/- 2 for a salt with its R enantiomer and jumped to 53 +/- 4 for the S. These effects, also observed in other organic solvents, were explained by means of structure-based molecular modeling of the lipase-bound transition states of the substrate enantiomers and their diastereomeric salts.     

Novel route for the resolution of both enantiomers of dropropizine by using oxime esters and supported lipases of Pseudomonas cepacia

Resolution of (R)- and (S)-dropropizine which is an antitussive and central sedative therapeutic agent in high optical and chemical yields was achieved by lipases of Pseudomonas cepacia supported on ceramic particles (lipase PS-C) and on diatomite (lipase PS-D) with oxime esters in organic solvents. The influence of several factors (lipase source, structural variations in oxime esters, the amount of lipase and its recyclability) on the enantioselectivity have been investigated. Different properties were used to describe the solvents, namely the hydrophobicity (quantified by log P) and the dielectic constant (epsilon). This enzymatic acylation using oxime esters was significant as only (S)-dropropizine and (R)-dropropizine monoacetate was obtained. (R)-Dropropizine monoacetate was chemically hydrolyzed to obtain (R)-dropropizine. The highest enantioselectivity was observed when O-acetyl benzophenone oxime was used. This enzymatic resolution provides a versatile method for getting the pure enantiomers of dropropizine by effectively optimizing the various reaction parameters.     

A model of the pressure dependence of the enantioselectivity of Candida rugosalipase towards (+/-)-menthol

Transesterification of (+/-)-menthol using propionic acid anhydride and Candida rugosa lipase was performed in chloroform and water at different pressures (1, 10, 50, and 100 bar) to study the pressure dependence of enantioselectivity E. As a result, E significantly decreased with increasing pressure from E = 55 (1 bar) to E = 47 (10 bar), E = 37 (50 bar), and E = 9 (100 bar). To rationalize the experimental findings, molecular dynamics simulations of Candida rugosa lipase were carried out. Analyzing the lipase geometry at 1, 10, 50, and 100 bar revealed a cavity in the Candida rugosa lipase. The cavity leads from a position on the surface distinct from the substrate binding site to the core towards the active site, and is limited by F415 and the catalytic H449. In the crystal structure of the Candida rugosa lipase, this cavity is filled with six water molecules. The number of water molecules in this cavity gradually increased with increasing pressure: six molecules in the simulation at 1 bar, 10 molecules at 10 bar, 12 molecules at 50 bar, and 13 molecules at 100 bar. Likewise, the volume of the cavity progressively increased from about 1864 A(3) in the simulation at 1 bar to 2529 A(3) at 10 bar, 2526 A(3) at 50 bar, and 2617 A(3) at 100 bar. At 100 bar, one water molecule slipped between F415 and H449, displacing the catalytic histidine side chain and thus opening the cavity to form a continuous water channel. The rotation of the side chain leads to a decreased distance between the H449-N epsilon and the (+)-menthyl-oxygen (nonpreferred enantiomer) in the acyl enzyme intermediate, a factor determining the enantioselectivity of the lipase. Although the geometry of the preferred enantiomer is similar in all simulations, the geometry of the nonpreferred enantiomer gets gradually more reactive. This observation correlates with the gradually decreasing enantioselectivity E.     

Chemoenzymatic synthesis of (S) and (R)-propranolol and sotalol employing one-pot lipase resolution protocol

Synthesis of both enantiomers of biologically active propranolol and sotalol has been achieved in high optical purity by one-pot reduction of 3 and 7 followed by in situ lipase resolution of the respective chlorohydrins. Pseudomonas cepacia lipase immobilized on ceramic particles (PS-C) provided the chlorohydrin and acetate, which on nucleophilic substitution with isopropyl amine afforded the target amino alcohols in high enantioselectivity under mild reaction conditions.     

The enantioselective hydrolysis of 3-hydroxy-5-phenyl-4-pentenoicacidethylester in supercritical carbon dioxide using lipases

A new experimental high-pressure-unit was constructed for the enantioselective enzymatic hydrolysis of 3-hydroxy-5-phenyl-4-pentenoicacidethylester (a precursor for biological interesting substances) in a biphasic buffer/SCCO(2)-system. One objective is to take advantage of the solubility differences of the substrate and the produced acid. Thus the different solubilities of the substrates and the products in the different phases were studied regarding to an overall process integration. One ester enantiomer is preferably hydrolyzed, the other remains in the supercritical phase. And the produced acid enantiomer is concentrated in the buffer phase. The decrease in pressure is followed by an extraction process of the remaining substrate-enantiomer, in consequence it will be possible to combine an enzymatic reaction with a separation step. The catalysis was optimized in regard to enantioselectivity, enantiomeric excess, conversion and reaction time. A high enantioselectivity is achieved for the aromatic substrate using the lipase of Pseudomonas cepacia. The results show that this unconventional reaction system offers tremendous advantages for enzyme process development.     

Predicting enzyme behavior in nonconventional media: correlating nitrilase function with solvent properties

The insolubility of nitrile substrates in aqueous reaction mixture decreases the enzymatic reaction rate. We studied the interaction of fourteen water miscible organic solvents with immobilized nitrile hydrolyzing biocatalyst. Correlation of nitrilase function with physico-chemical properties of the solvents has allowed us to predict the enzyme behavior in such non-conventional media. Addition of organic solvent up to a critical concentration leads to an enhancement in reaction rate, however, any further increase beyond the critical concentration in the latter leads to the decrease in catalytic efficiency of the enzyme, probably due to protein denaturation. The solvent dielectric constant (epsilon) showed a linear correlation with the critical concentration of the solvent used and the extent of nitrile hydrolysis. Unlike alcohols, the reaction rate in case of aprotic solvents could be linearly correlated to solvent log P. Further, kinetic analysis confirmed that the affinity of the enzyme for its substrate (K (m)) was highly dependent upon the aprotic solvent used. Finally, the prospect of solvent engineering also permitted the control of enzyme enantioselectivity by regulating enantiomer traffic at the active site.     

Key residues for controlling enantioselectivity of Halohydrin dehalogenase from Arthrobacter sp. strain AD2, revealed by structure-guided directed evolution

Halohydrin dehalogenase from Agrobacterium radiobacter AD1 (HheC) is a valuable tool in the preparation of R enantiomers of epoxides and β-substituted alcohols. In contrast, the halohydrin dehalogenase from Arthrobacter sp. AD2 (HheA) shows a low S enantioselectivity toward most aromatic substrates. Here, three amino acids (V136, L141, and N178) located in the two neighboring active-site loops of HheA were proposed to be the key residues for controlling enantioselectivity. They were subjected to saturation mutagenesis aimed at evolving an S-selective enzyme. This led to the selection of two outstanding mutants (the V136Y/L141G and N178A mutants). The double mutant displayed an inverted enantioselectivity (from S enantioselectivity [E(S)] = 1.7 to R enantioselectivity [E(R)] = 13) toward 2-chloro-1-phenylethanol without compromising enzyme activity. Strikingly, the N178A mutant showed a large enantioselectivity improvement (E(S) > 200) and a 5- to 6-fold-enhanced specific activity toward (S)-2-chloro-1-phenylethanol. Further analysis revealed that those mutations produced some interference for the binding of nonfavored enantiomers which could account for the observed enantioselectivities. Our work demonstrated that those three active-site residues are indeed crucial in modulating the enantioselectivity of HheA and that a semirational design strategy has great potential for rapid creation of novel industrial biocatalysts.     

Enantioselective recognition mechanism of secondary alcohol by surfactant-coated lipases in nonaqueous media.

The enantioselective recognition mechanism of secondary alcohol by lipases originated from Candida rugosa and Pseudomonas cepacia was elucidated on the basis of the kinetic study of the esterification of alcohol with lauric acid in isooctane. To obtain inherent kinetic parameters, we utilized a surfactant-coated lipase whose conformation is considered to be an "open" form in a homogeneous organic solvent. Based on the experimental results, the enantioselectivity of lipases was found to be derived from the difference in the V(max) values between the two enantiomers. The same result was observed when lipases of different origin and substrates with different molecular structures were applied. © 1999 John Wiley & Sons, Inc.     

NBD-Cl modification of essential residues in mitochondrial nicotinamide nucleotide transhydrogenase from bovine heart

Modification of mitochondrial nicotinamide nucleotide transhydrogenase (NADPH: NAD+ oxidoreductase, EC 1.6.1.1) with 4-chloro-7-nitrobenzo-2-oxa-1,3-diazole (NBD-Cl), followed by measurement of the absorption or fluorescence of the transhydrogenase-NBD adducts, resulted in a biphasic labelling of approx. 4-6 sulfhydryls, presumably cysteine residues. Of these 1-2 (27%) were fast-reacting and 3-4 (73%) slow-reacting sulfhydryls. In the presence of substrates, e.g., NADPH, the labelling was monophasic and all sulfhydryls were fast-reacting, suggesting that the modified sulfhydryls are predominantly localized peripheral to the NAD(P)(H)-binding sites. The rates of modification allowed the calculation of the rate constants for each phase of the labelling. Both in the absence and in the presence of a substrate, e.g., NADPH, the extent of labelling essentially parallelled the inhibition of transhydrogenase activity. Attempts to reactivate transhydrogenase by reduction of labelled sulfhydryls were not successful. Photo-induced transfer of the NBD adduct in partially inhibited transhydrogenase, from the sulfhydryls to reactive NH2 groups of amino-acid residue(s), identified as lysine residue(s), was parallelled by an inhibition of the residual transhydrogenase activity. It is suggested that a lysine localized close to the fast-reacting NBD-Cl-reactive sulfhydryl groups is essential for activity.     

Enzymatic Resolutions of Heterocyclic Alcohols

The butyrates and acetates of heterocyclic alcohols like 3 - hydroxy tetrahydrofuran and - pyran, 3- and 4 - chromanol as well as the corresponding sulfur heterocycles were hydrolyzed using lipase from Candida rugosa (CRL) and from Pseudomonas cepacia, (PCL). Poor to excellent enantioselectivities were obtained depending on the structure of the substrates. An electrostatic amendment to the steric substrate model for PGL is proposed.     

Complex of Burkholderia cepacia lipase with transition state analogue of 1-phenoxy-2-acetoxybutane: biocatalytic, structural and modelling study.

In a series of four racemic phenoxyalkyl-alkyl carbinols, 1-phenoxy-2-hydroxybutane (1) is enantioselectively acetylated by Burkholderia cepacia (formerly Pseudomonas cepacia) lipase with an E value > or = 200, whereas for the other three racemates E was found to be < or = 4. To explain the high preference of B. cepacia lipase for (R)-(+)-1, a precursor of its transition state analogue with a tetrahedral P-atom, (R(P),S(P))-O-(2R)-(1-phenoxybut-2-yl)methylphosphonic acid chloride was prepared and crystallized in complex with B. cepacia lipase. The X-ray structure of the complex was determined, allowing to compare the conformation of the inhibitor with results of molecular modelling.     

Alternate substrate inhibitors of an alpha-chymotrypsin: enantioselective interaction of aryl-substituted enol lactones

Four enol lactones, bearing phenyl or 1-naphthyl substituents on the alpha or beta positions [3-phenyl-6-methylenetetrahydro-2-pyranone (alpha Ph6H, IIc), 3-(1-naphthyl)-6-methylenetetrahydro-2-pyranone (alpha Np6H, IId), 4-phenyl-6-methylenetetrahydro-2-pyranone (beta Ph6H, IIIc), and 4-(1-naphthyl)-6-methylenetetrahydro-2-pyranone (beta Np6H, IIId)], available as pure R and S enantiomers, have been studied as alternate substrate inhibitors of chymotrypsin. Kinetic constants for substrate binding (Ks) and acylation (ka) were determined by a competitive substrate assay, using succinyl-L-Ala-L-Ala-L-Pro-L-Phe p-nitroanilide; the deacylation rate constant (kd) was determined by the proflavin displacement assay. All lactones undergo rapid acylation (ka varies from 17 to 170 min-1) that shows little enantioselectivity; there is, however, pronounced enantioselectivity in substrate binding for three of the lactones [Ks(R/S) = 40-110]. In each case it is the enantiomer with the S configuration that has the higher affinity. In all cases, deacylation rates are slow, and in two cases, acyl enzymes with half-lives of 4.0 and 12.5 h at pH 7.2, 25 degrees C, are obtained (for beta Ph6H and alpha Np6H, respectively). In these cases, high deacylation enantioselectivity is observed [kd(S/R) = 60-70], and the lactone more weakly bound as a substrate (R enantiomer) gives the more stable acyl enzyme. Two hypotheses, involving hindrance of the attack of water or an exchange of the ester and ketone carbonyl groups in the acyl enzyme, are advanced as possible explanations for the high stability of these acyl enzymes.     

Enzymatic Resolutions of Heterocyclic Alcohols

The butyrates and acetates of heterocyclic alcohols like 3 - hydroxy tetrahydrofuran and - pyran, 3- and 4 - chromanol as well as the corresponding sulfur heterocycles were hydrolyzed using lipase from Candida rugosa (CRL) and from Pseudomonas cepacia, (PCL). Poor to excellent enantioselectivities were obtained depending on the structure of the substrates. An electrostatic amendment to the steric substrate model for PGL is proposed.     

Enantioselective synthesis of ibuprofen esters in AOT/isooctane microemulsions by Candida cylindracea lipase

The enantioselective esterification of racemic ibuprofen, catalyzed by a Candida cylindracea lipase, was studied in a water-in-oil microemulsion (AOT/isooctane). By using n-propanol as the alcohol, an optimal W(0) ([H(2)O]/[AOT] ratio) of 12 was found for the synthesis of n-propyl-ibuprofenate at room temperature. The lipase showed high preference for the S(+)-enantiomer of ibuprofen, which was esterified to the corresponding S(+)-ibuprofen ester. The R(-)-ibuprofen remained unesterified in the microemulsion. The calculated enantioselectivity value (E) for S-ibuprofen ester was greater than 150 (conversion 0.32). The enzyme activities of n-alcohols with different chain lengths (3-12) were compared, and it appeared that short- (propanol and butanol) and long-chained (decanol and dodecanol) alcohols were better substrates than the intermediate ones (pentanol, hexanol, and octanol). However, unlike secondary and tertiary alcohols, all of the tested primary alcohols were substrates for the lipase. The reversible reaction (i.e., the hydrolysis of racemic ibuprofen ester in the microemulsion) was also carried out enantioselectively by the enzyme. Only the S form of the ester was hydrolyzed to the corresponding S-ibuprofen. The reaction yield was, however, only about 4% after 10 days of reaction. The corresponding yield for the esterification of ibuprofen was about 35% (10 days). The high enantioselectivity displayed by the lipase in the microemulsion system was seen neither in a similar esterification reaction in a pure organic solvent system (isooctane) nor in the hydrolysis reaction in an aqueous system (buffer). The E value for S-ibuprofen ester in the isooctane system was 3.0 (conversion 0.41), and only 1.3 for S-ibuprofen in the hydrolysis reaction (conversion 0.32). The differences in enantioselectivity for the lipase in various systems are likely due to interfacial phenomena. In the microemulsion system, the water in which the enzyme is dissolved is separated from the solvent by a layer of surfactant molecules, thus creating an interface with a relatively large area. Such interfaces are not present in the pure organic solvent systems (no surfactant) nor in aqueous systems. (c) 1993 John Wiley & Sons, Inc.     

Efficient chemoenzymatic synthesis of (S)- and (R)-5-(1-aminoethyl)-2-(cyclohexylmethoxy)benzamide: key intermediate for Src-SH2 inhibitor

A facile chemoenzymatic synthesis of both the S and R forms of 5-(1-aminoethyl)-2-(cyclohexylmethoxy)benzamide a key intermediate of non-peptidic Src SH2 inhibitors is described. Both the enantiomers were synthesized in high optical purity (>99% ee) by reduction followed by lipase-mediated acylation of the precursor 6 in one-pot. Immobilized Pseudomonas cepacia lipase offered high degree of enantioselectivity with spontaneity.     

Substrate inhibition mode of omega-transaminase from Vibrio fluvialis JS17 is dependent on the chirality of substrate

Substrate inhibition is a common phenomenon in enzyme chemistry, which is observed only with a fast-reacting substrate enantiomer. We report here for the first time substrate inhibition of an enantioselective enzyme by both substrate enantiomers. The enantioselective substrate inhibition, i.e., different mode of inhibition by each substrate enantiomer, of (S)-specific omega-transaminase was found with various chiral amines. A kinetic model based on ping-pong bi-bi mechanism has been developed and kinetic parameters were measured. The kinetic model reveals that the inhibition by (R)-amine results from formation of Michaelis complex with enzyme-pyridoxal 5'-phosphate, whereas the inhibition by (S)-amine results from the formation of the complex with enzyme-pyridoxamine 5'-phosphate. Substrate inhibition constants (K(SI)) of each (S)-enantiomer of four chiral amines showed a linear correlation with those of cognate (R)-amines. Such a correlation was also found between the K(SI) values and Michaelis constants of (S)-amines. These correlations indicate that recognition mechanisms and active site structures of both enzyme-pyridoxal 5'-phosphate, enzyme-pyridoxamine 5'-phosphate are similar. Taken together with the results, high propensity for non-productive substrate binding strongly suggests that binding pockets of the omega-transaminase is loosely defined, which accounts for the enantioselective substrate inhibition.     

Enantioselective kinetics of α-hexachlorocyclohexane in earthworm (Eisenia fedtia) and forest soil

The enantioselective bioaccumulation and elimination behaviors of α-hexachlorocyclohexane (α-HCH) enantiomers in earthworm and soil were investigated by chiral gas chromatography. Enantiomer fraction values were calculated as indicators of the enantioselectivity. The mature earthworms were exposed to 0.10 μg g(-1)(wwt) (0.14 μg g(-1)(dwt)) spiked soil continuously for the bioaccumulation, and the elimination was conducted after an enrichment period in the soil. The results showed that both the bioaccumulation and elimination processes followed monophasic kinetics, body residues of α-HCH in earthworm increased to high level at the fifth day, and enantioselectivity was found in the bioaccumulation process with the rate constant (k) of 0.80 d(-1) for (+)-α-HCH and 0.74 d(-1) for (-)-α-HCH. The half life (t(1/2)) of the enantiomers obtained in the elimination process was within one day. The bioaccumulation factors of steady state of α-HCH enantiomers were 2.82 for (+)-α-HCH and 2.75 for (-)-α-HCH. The enantiomer fractions of earthworm and soil obviously below 0.5 during uptake and elimination processes indicate significant enantioselectivity and preferential depuration of (+)-α-HCH in earthworm. However, earthworms do not have a great capacity for getting rid of α-HCH in polluted soil shown by a contradistinctive experiment.