Synthesis of sugar-based chelating surfactants for metal removal from wastewater

Four chelating surfactants were synthesized in a few steps from octyl D-glucosides. Their main interfacial properties were determined, and their flotation properties were evaluated on a laboratory scale using Fe(III) as a model contaminant metal. The performance on metal extraction was mainly dependent on the complexing functional group, but the surfactant efficiency was also important.     

Microbial purification technique of mineral dressing plants reject waters

Abstract: Earlier investigations on laboratory and pilot plant scale have shown the resort to microorganisms to be a practicable approach to the problem of purifying mineral dressing plant reject waters from residual flotation reagents and/or metal ions. In spite of the proven effectiveness of this method, one major drawback, namely the pathogenicity of some microorganisms, has so far hampered its application on a commercial scale. A research programme, aimed at developing a microbial reject water purification technique utilizing non-pathogenic strains was thus drawn up and is currently being implemented. Strains such as Bacillus subtilis, Saccharomyces cerevisiiae, Bifidobacterium bifidum, Lactobacillus acidophilus and Acinetobacter calcoaceticus , which are not harmful to human health, some of them being commonly found in the human intestine, have been successfully tested for removing alkylsulphates, alkylamines and fany acids from solutions simulating flotation plant tailings waters. Removals as high as 90% in less than 48 h can be easily achieved with no nutrient requirements, since in most cases the flotation reagent residue to be removed is metabolized by the microorganisms themselves.     

Harvesting of Scenedesmus obliquus FSP-3 using dispersed ozone flotation

The Scenedesmus obliquus FSP-3, a species with excellent potential for CO₂ capture and lipid production, was harvested using dispersed ozone flotation. While air aeration does not, ozone produces effective solid-liquid separation through flotation. Ozone dose applied for sufficient algal flotation is similar to those used in practical drinking waterworks. The algae removal rate, surface charge, and hydrophobicity of algal cells, and fluorescence characteristics and proteins and polysaccharides contents of algogenic organic matter (AOM) were determined during ozonation. Proteins released from tightly bound AOM are essential to modifying the hydrophobicity of bubble surfaces for easy cell attachment and to forming a top froth layer for collecting floating cells. Humic substances in the suspension scavenge dosed ozone that adversely affects ozone flotation efficiency of algal cells.     

Biodegradation of Some Organic Flotation Reagents by Bacillus polymyxa

The soil bacterium Bacillus polymyxa is shown to effectively remove organic flotation collectors such as dodecyl amine, diamine, sodium isopropyl xanthate, and sodium oleate from alkaline solutions. Adsorption and bacterial growth studies indicated enhanced surface affinity of the amine collectors toward the bacterial cells. All the above organic reagents could be efficiently removed from alkaline solutions through bacterial interaction. Ultraviolet (UV)-visible and Fourier transform infrared (FTIR) spectra during biodegradation of these reagents revealed the stages in biodegradation. Possible mechanisms are outlined.     

Effect of rhamnolipid biosurfactants on performance of coal and mineral flotation

The effect of a concentrated rhamnolipid biosurfactant (purity > 97%) produced by Pseudomonas aeruginosa MA01 on flotation performance of coal and minerals was studied and compared with those from synthetic flotation reagents in both single and mixed systems. Results of phosphate flotation tests showed that phosphate content in the floated product decreased by rhamnolipid concentration. However, final recovery of phosphate at appropriate dosage of reagent was insignificant. This could be ascribed to the increase of iron recovery to final concentrate likely due to collecting action of rhamnolipid for iron minerals. In coal flotation, the increase of rhamnolipid concentration in mixture with pine oil reduced both ash content and coal yield of concentrates. In desulfurization of a sample iron concentrate using reverse flotation, rhamnolipid addition successfully decreased the sulfur content of the iron concentrate. The flotation responses of the studied sample ores showed that rhamnolipid can be used as a promising frother or co-frother in mineral processing practices.     

Optimization of Operating Parameters for the Selective Flotation of Heavy Metals from Contaminated Fine Sediment Using Response Surface Model

In this study, the effect of different flotation operating variables, such as pH, pulp density, collector concentration, impeller speed, frother concentration, and air flow rate, on selective flotation of heavy metals, especially Cu, from fine dredged sediment has been evaluated. Parameter optimization was done using the single parameter at a time method and response surface method (RSM) using Box-Behnken design and was assessed in terms of metal removal, metal recovery, metal concentration factor, and mass recovery. Among the operating variables studied, pulp pH, collector concentration, pulp density, and impeller speed were found to have significant effect on metal flotation selectivity. A validation study of the response surface model showed its aptness to predict the optimum values of operating parameters and their interactions on flotation responses which evaluate flotation performance. Flotation experiments under optimum operating parameters showed good flotation selectivity for Cu (3.3 ± 0.2) with a mass recovery of (mass of sediment in the froth) 14.1 ± 1 and Cu removal of 37.4 ± 3.6%.     

A chelate complex‐enhanced luminol system for selective determination of Co(II), Fe(II) and Cr(III)

A determination method for Co(II), Fe(II) and Cr(III) ions by luminol‐H₂O₂ system using chelating reagents is presented. A metal ion‐chelating ligand complex with a Co(II) ion and a chelating reagent like ethylenediaminetetraacetic acid (EDTA) produced highly enhanced chemiluminescence (CL) intensity as well as longer lifetime in the luminol‐H₂O₂ system compared to metals that exist as free ions. Whereas free Cu(II) and Pb(II) ions had a strong catalytic effect on the luminol‐H₂O₂ system, significantly, the complexes of Cu(II) and Pb(II) with chelating reagents lost their catalytic activity due to the chelating reagents acting as masking agents. Based on the observed phenomenon, it was possible to determine Co(II), Fe(II) and Cr(III) ions with enhanced sensitivity and selectivity using the chelating reagents of the luminol‐H₂O₂ system. The effects of ligand, H₂O₂ concentration, pH, buffer solution and concentrations of chelating reagents on CL intensity of the luminol‐H₂O₂ system were investigated and optimized for the determination of Co(II), Fe(II) and Cr(III) ions. Under optimized conditions, the calibration curve of metal ions was linear over the range of 2.0 × 10^‐8 to 2.0 × 10^‐5 M for Co(II), 1.0 × 10^‐7 to 2.0 × 10^‐5 M for Fe (II) and 2.0 × 10^‐7 to 1.0 × 10^‐4 M for Cr(III). Limits of detection (3σ/s) were 1.2 × 10^‐8, 4.0 × 10^‐8 and 1.2 × 10^‐7 M for Co(II), Fe(II) and Cr(III), respectively. Copyright © 2012 John Wiley & Sons, Ltd.     

Removal of Nonvolatile Hydrophobic Compounds from Artificially and Naturally Contaminated Soils by Column Flotation

Removal of a nonvolatile paraffin oil from spiked soils using column flotation with countercurrent bubbles was explored at both ambient and elevated temperatures. Up to 80% of the contaminant was separated from the coarse fraction (250 to 800?µm) by flotation at 45°C using aqueous solutions of anionic and nonionic surfactants or alkali salt as collectors. With the 75 to 800?µm fraction, removal efficiencies of up to 65% was achieved. Sodium dodecyl-sulfate and Triton 100X at 50?ppm concentrations as well as sodium carbonate at pH 10 were found to yield similar removal efficiencies. Same surfactants were tested in soil washing experiments at similar and higher dosages. Removal efficiency by flotation was higher than those obtained by soil washing in all cases. In addition, as high surfactant dosage are not used in flotation, unlike in the case of soil washing, the problem of formation of stable emulsions was absent. Experiments with soil polluted by hydrocarbons from a contaminated site demonstrated the feasibility of the flotation process for decontamination of coarse (250 to 830?µm) fractions. A 70% reduction of petroleum hydrocarbon in soil was achieved as a result of flotation at 45°C using the above surfactants.     

Polyethyleneimine-induced flocculation and flotation of cyanobacterium Anabaena flos-aquae for gas vesicle production

Gas vesicles are hollow, proteinaceous structures found in some strains of cyanobacteria. They have been used to increase the oxygen supply and improve the cultivation of shear-sensitive mammalian cells. However, the production and, especially, collection of cells and gas vesicles were laborious and ineffective. In this study we examined the use of the cationic polymer, polyethyleneimine (PEI), for improving the cell harvesting by flocculation and flotation. PEI was examined to determine the appropriate molecular weight, pH range, and dosage. The dose of 20–30 mg/l of PEI with molecular weight of 25,000 in the pH range of 6.0–8.5 was found to provide effective and efficient cell flocculation and flotation. As the PEI dose increased, the rate of flotation increased but the clearance (collection) efficacy declined slightly. The culture samples used in this study were taken from light-limiting continuous culture systems at different dilution rates (0.05–0.24 h⁻¹). Without PEI addition, the cells at dilution rates lower than 0.1 h did not float while those at higher dilution rates would float slowly. With PEI addition, the flocculated cells at the dilution rate of 0.05 h⁻¹ sank and those of higher dilution rates would float and the flotation rate increased with increasing specific growth rate. Nonetheless, PEI flocculation and flotation (or sedimentation) could be used to harvest cells at a wide range of growth states.     

Assay of cysteine conjugate β-lyase activity with S-(2-benzothiazolyl)cysteine as the substrate

Cysteine conjugate β-lyases convert S-substituted cysteine conjugates to pyruvate, ammonia, and thiols. A simple assay for cysteine conjugate β-lyase activity was developed with S-(2-benzothiazolyl)cysteine as the substrate. The production of 2-mercaptobenzothiazole was measured by its intense absorbance at 321 nm in trichloroacetic acid-quenched reaction mixtures. The formation of 2-mercaptobenzothiazole was directly proportional to protein concentrations of 0.17 to 1.2 mg/ml with rat liver cytosol as the source of β-lyase activity. Production of 2-mercaptobenzothiazole was stoichiometric with pyruvate and was increased by addition of pyridoxal phosphate only at reaction times of 5 min or longer. The simplicity, sensitivity, and specificity of this procedure offer significant advantages over other methods for the assay of cysteine conjugate β-lyase activity.     

Remediation of Copper from Copper Mine Wastes and Contaminated Soils Using (S,S)-Ethylenediaminedisuccinic Acid and Acidophilic Bacteria

The biodegradable chelating agent (S,S)-Ehylenediaminedisuccinic acid (EDDS), autochthonous acidophilic bacteria, and a combination of the two means were investigated for the removal of pseudo-total and ethylenediaminetetraacetic acid (EDTA)-available content of Cu from surface layers of three soil categories in the Bor copper mining area. Their efficiencies were compared at mine overburden, flotation tailings, and agricultural land sites in order to determine the potential role of these approaches in the soil remediation process. The most effective removal of Cu was achieved on flotation tailings, where combined treatment showed significant reduction of pseudo-total and EDTA-available concentrations of Cu (40.5?±?27.3% and 99.6?±?0.2%, respectively). Acidophilic bacteria treatment showed high efficiency on flotation tailings, removing 94.1?±?1.2% of EDTA-available Cu. EDDS treatment showed discernible results in the removal of EDTA-available Cu from agricultural land soil (44.4?±?13.9%). In the case of overburden soil material, selected agents did not have statistically significant results in the removal of pseudo-total or EDTA-available fraction of Cu. Chosen remediation approaches showed diverse efficiency for soil categories on investigated sites. Combined approach showed synergistic results in the case of EDTA-available Cu removal from flotation tailings soils, suggesting that this combination deserves further attention as a potentially promising environmentally friendly remediation option.     

Studies on porphyrinogen carboxy-lyase from chick embryo liver

The purpose of the present work was to find the optimal conditions for the assay of chick embryo liver porphyrinogen carboxy-lyase. The enzyme activity was studied as a function of protein and substrate concentrations, time, pH value and incubation temperature. The effects of reduced glutathione (GSH), ethylenediaminetetra-acetate (EDTA), oxygen and several chemical compounds such as pyridoxal phosphate, sodium and potassium halogenated salts, sulph - hydryl reagents, chelating agents and ferrous iron were also investigated. The following results were found: (1) The optimal protein concentration was 1.25-2.5 mg/ml. For the substrate uroporphyrinogen III, the best concentration was 2 mumol/l; a slight inhibition was found at higher substrate concentrations. (2) The optimal pH value was 6.8 for both stages of uroporphyrinogen III decarboxylation ( octacarboxylic first stage----heptacarboxylic second stage---- tetracarboxylic porphyrinogen). (3) The activity increased with the incubation temperature (25-60 degrees C). (4) The enzyme activity was not enhanced by the addition of GSH or other sulph - hydryl reagents (cysteine and dithiothreitol), nor by the incorporation of EDTA or other chelating agents (Na-diethyldithiocarbamate, alpha,alpha'-bipyridyl and Na-pyrophosphate). (5) Oxygen diminished the second stage of decarboxylation. (6) Pyridoxal phosphate seems not to be a cofactor necessary in the decarboxylation. (7) NaCl or KCl diminished the activity in higher degree than did NaF or KF; the second stage was, in all cases, more affected than the first. (8) FeSO4 slightly diminished the second stage of uroporphyrinogen III decarboxylation at concentrations of 0.05 and 0.15 mmol/l, but both stages were significantly decreased at 0.3 mmol/l.     

Structure,energetics and properties of some molecules with potent anti-HIV activity: a theoretical study

Density functional theory (DFT; B3LYP) and Hartree–Fock (HF; 3-21G, 6-31G(d) and 6-311G(d,p)) calculations with complete geometry optimisations are carried out in the ground state on five 6-aminoquinolone derivatives, which have been proved to be highly effective in inhibiting HIV replication, to study their structures, energetics and HOMO–LUMO correlation with physiological action. The gas-phase calculations and single-point polarisable continuum model water-phase calculations show that the molecules are highly effective in inhibiting HIV replication, which is in excellent agreement with the experiment. Structural features, energies, charge densities and HOMO–LUMO correlation have been found to substantiate the experimental findings. Compound 4 (pyrazine) shows some special features in DFT calculations which are not found in HF calculations. In the present series, HF results are more reliable as expected.     

Adsorption of a hydrophobic bacterium onto hematite: Implications in the froth flotation of the mineral

Summary The present study reports on the relationship between adsorption ofMycobacterium phlei onto hematite and flotation of the mineral. From light and scanning electron microscopy, contact angle and electrophoretic mobility observations it was found thatM. phlei is more negatively charged than hematite, that it readily accumulates onto the mineral and that it functions as a flotation collector for the mineral with optimum flotation taking place at about pH 2.5.     

Flotation separation of mercury(II) from environmental water samples using thiosemicarbazide derivatives as chelating agents and oleic acid as surfactant

Abstract

A simple and rapid procedure is developed for the quantitative flotation of mercury(II) from aqueous solutions. Thiosemicarbazide derivatives such as: 1-(amino-N-phenylmethanethio)-4-(pyridine-2-yl)thio-semicarbazide (H₂PPS), N-phenyl-2-(pyridine-2-ylcarbamothioyl) hydrazinecarboxamide (H₂PBO), 1-(amino(thioformyl)-N-phenylform)-4-(pyridine-2-yl)thiosemicarbazide (H2APO), and 1-(amino-N-(pyri-dine-3-yl)methanethio)-4-(pyridine-2-yl)thiosemicarbazide (H₂PPY) are used as organic chelating agents and oleic acid (HOL) as surfactant. The different parameters affecting the flotation process namely, metal ion, ligands and surfactant concentrations, foreign ions (which are normally present in fresh and saline waters), pH and temperature are examined. Nearly 100% of mercury ions are floated at a metal:ligand ratio of 1: 4, pH ~ 4 and at room temperature (~25°C). The procedure was successfully applied to recover Hg²⁺ ions spiked into some water samples. A flotation mechanism is suggested based on some physical and chemical studies on the solid complexes isolated from aqueous and floated layers.     

The role of clothing fabrics as passive pollen collectors in the north‐eastern United States

The purpose of this investigation is to determine if clothing fabrics act as passive pollen collectors, and to determine if different fabrics vary with regard to the abundance and type of pollen trapped. Five of the most common fabrics in the United States (cotton, wool, polyester, silk and linen) were used to trap pollen. The pollen collecting apparatus was constructed of a 30?cm diameter circular needlepoint hoop, which vertically rotated freely, and was mounted on a dowel that was driven into the soil to chest height. Five pollen collectors, each with one of the five fabrics were placed at a collection site in rural, suburban, and urban habitats in Rhode Island for a 24?h period at weekly or biweekly intervals throughout 2002–2003. Pollen was washed from each of the fabrics and acetolysed. Total pollen per cm² removed from each of the fabric types was estimated using a haemocytometer. The pollen types were identified, and 200 grains were counted to determine the relative abundance of the various pollen types recovered from the fabrics. Clothing fabrics act as passive pollen collectors and the flora recovered from the fabric represent the qualitative and quantitative components of the pollen rain for that specific day. There are quantitative differences among the relative abundance of pollen types from the three habitats (urban, suburban, and rural). Washing with water and a detergent eliminates a majority of the pollen from the fabrics.     

Structuro-functional units of the salivary and lacrimal glands

By means of the multilayer graphic and plastic reconstruction methods using series of semithin sections, spatial tridimensional organization of the epithelial complexes and blood microcirculatory bed in the rat palatal salivary glands and the lacrimal gland of the human newborn have been studied. Since their ducts serve not only for discharging their secrete into the external medium, but also for accumulation (as collectors), the sublobular unit--adenomere should be referred to as a part of elementary level of organization of the epithelial complexes. The adenomere has in its composition a collecting centrally situating duct. However, while studying structure of the blood microcirculatory bed, it is found out that there is not any strict territorial correspondence between its functional units and structural units of the glandular epithelium. Nevertheless, giving a great importance to a tight syntopic connection of the collecting ducts of the adenomeres with the postcapillary venules (that belong to filtrating microvessels), these are sublobular units--adenomeres that are distinguished as structural-functional units in the glands.     

A method for studying the cellular location of lead in lichens

Abstract: A number of possible displacing agents have been tested for their ability to release extracellular bound lead from Cladonia portentosa. Metal cations (Ni and Cu), thiol-rich reagents (glutathione, ammonium pyrrolidinedithiocarbamate) and some chelating agents (EGTA, EDTA at pH 9·5 or pH 2·7) were ineffective or caused membrane damage. Disodium EDTA at pH 4·5 was found to be an effective displacing agent, although the Na caused some release of intracellular K without membrane damage. This displacement procedure showed that no Pb supplied in the laboratory entered the protoplast in 2 h. The effect of Ca, Cu, Pb, and Sr on membrane integrity was investigated.     

Spat collection studies on pearl oysters Pinctada mazatlanica and Pteria sterna (Bivalvia,Pteriidae) in Bahia de La Paz,South Baja California,Mexico

The present work deals with the temporal and bathymetrical variations of the epifaunal community associated with two species of pearl oysters (Pinctada mazatlanica and Pteria sterna) during a seed collecting season from June to November 1989. A total of 63 items (species, genera and/or families) were recorded; their variations in presence and abundance were followed during three periods (June–July, August–September and October–November). The collectors were examined for different immersion times (2, 4, 6 and 8 weeks) for each period. Community structure was compared through the Brillouin Index, the Morisita Index and the Importance Value.We define the chronology of spatfall for both species of pearl oysters and their bathymetrical distribution. Relationships between these species and the epifaunal community present into the collectors were analysed, searching for possible noxious effects on the survival of juvenile pearl oysters, and identifying index species related with their spatfall. A strategy for starting massive seed collection of both species is established, particularly for P. mazatlanica.     

Analysis of sampling strategies for collecting genetic material1

A study was made using the data obtained during a 1973 expedition to collect wheat in Sicily in order to determine possible sampling strategies for collecting genetic resource material. Based on these analyses tables have been developed for selecting optimum sample sizes depending on relative cost and variance component considerations. It is almost impossible to make a general recommendation for optimum sampling strategy. Variation may be (andprobably is) different in diverse areas, thus what is true in Sicily may not be true for Ethiopia, etc. Also sampling strategy should be different for characters which are inherited quantitatively from those which are controlled by one or two genes. Visual selection will reduce quantitative genetic variation and thus will defeat the primary purpose of collecting geneticresource material, which is to preserve as much genetic variation as possible. On the other hand, all collectors intuitively collect forms which seem new or unusual to them. Certainly when collecting for specific characters, such as disease resistance, dwarf growth type, stem strength, etc., collectors will not resort to random sampling. Many of the traits are rare and only large samples will ensure that genes responsible for these traits will be represented in the collection.