Dynamic loading stimulates chondrocyte biosynthesis when encapsulated in charged hydrogels prepared from poly(ethylene glycol) and chondroitin sulfate

This study aimed to elucidate the role of charge in mediating chondrocyte response to loading by employing synthetic 3D hydrogels. Specifically, neutral poly(ethylene glycol) (PEG) hydrogels were employed where negatively charged chondroitin sulfate (ChS), one of the main extracellular matrix components of cartilage, was systematically incorporated into the PEG network at 0%, 20% or 40% to control the fixed charge density. PEG hydrogels were employed as a control environment for extracellular events which occur as a result of loading, but which are not associated with a charged matrix (e.g., cell deformation and fluid flow). Freshly isolated bovine articular chondrocytes were embedded in the hydrogels and subject to dynamic mechanical stimulation (0.3 Hz, 15% amplitude strains, 6 h) and assayed for nitric oxide production, cell proliferation, proteoglycan synthesis, and collagen deposition. In the absence of loading, incorporation of charge inhibited cell proliferation by ~ 75%, proteoglycan synthesis by ~ 22–50% depending on ChS content, but had no affect on collagen deposition. Dynamic loading had no effect on cellular responses in PEG hydrogels. However, dynamically loading 20% ChS gels inhibited nitrite production by 50%, cell proliferation by 40%, but stimulated proteoglycan and collagen deposition by 162% and 565%, respectively. Dynamic loading of 40% ChS hydrogels stimulated nitrite production by 62% and proteoglycan synthesis by 123%, but inhibited cell proliferation by 54% and collagen deposition by 52%. Upon removing the load and culturing under free-swelling conditions for 36 h, the enhanced matrix synthesis observed in the 20% ChS gels was not maintained suggesting that loading is necessary to stimulate matrix production. In conclusion, extracellular events associated with a charged matrix have a dramatic affect on how chondrocytes respond to mechanical stimulation within these artificial 3D matrices suggesting that streaming potentials and/or dynamic changes in osmolarity may be important regulators of chondrocytes while cell deformation and fluid flow appear to have less of an effect.     

A combined passive and active musculoskeletal model study to estimate L4-L5 load sharing

A number of geometrically-detailed passive finite element (FE) models of the lumbar spine have been developed and validated under in vitro loading conditions. These models are devoid of muscles and thus cannot be directly used to simulate in vivo loading conditions acting on the lumbar joint structures or spinal implants. Gravity loads and muscle forces estimated by a trunk musculoskeletal (MS) model under twelve static activities were applied to a passive FE model of the L4-L5 segment to estimate load sharing among the joint structures (disc, ligaments, and facets) under simulated in vivo loading conditions. An equivalent follower (FL), that generates IDP equal to that generated by muscle forces, was computed in each task. Results indicated that under in vivo loading conditions, the passive FE model predicted intradiscal pressures (IDPs) that closely matched those measured under the simulated tasks (R² = 0.98 and root-mean-squared-error, RMSE = 0.18 MPa). The calculated equivalent FL compared well with the resultant force of all muscle forces and gravity loads acting on the L4-L5 segment (R² = 0.99 and RMSE = 58 N). Therefore, as an alternative approach to represent in vivo loading conditions in passive FE model studies, this FL can be estimated by available in-house or commercial MS models. In clinical applications and design of implants, commonly considered in vitro loading conditions on the passive FE models do not adequately represent the in vivo loading conditions under muscle exertions. Therefore, more realistic in vivo loading conditions should instead be used.     

Dynamic in vivo 3D atlantoaxial spine kinematics during upright rotation

Diagnosing dysfunctional atlantoaxial motion is challenging given limitations of current diagnostic imaging techniques. Three-dimensional imaging during upright functional motion may be useful in identifying dynamic instability not apparent on static imaging. Abnormal atlantoaxial motion has been linked to numerous pathologies including whiplash, cervicogenic headaches, C2 fractures, and rheumatoid arthritis. However, normal C1/C2 rotational kinematics under dynamic physiologic loading have not been previously reported owing to imaging difficulties. The objective of this study was to determine dynamic three-dimensional in vivo C1/C2 kinematics during upright axial rotation. Twenty young healthy adults performed full head rotation while seated within a biplane X-ray system while radiographs were collected at 30 images per second. Six degree-of-freedom kinematics were determined for C1 and C2 via a validated volumetric model-based tracking process. The maximum global head rotation (to one side) was 73.6 ± 8.3°, whereas maximum C1 rotation relative to C2 was 36.8 ± 6.7°. The relationship between C1/C2 rotation and head rotation was linear through midrange motion (±20° head rotation from neutral) in a nearly 1:1 ratio. Coupled rotation between C1 and C2 included 4.5 ± 3.1° of flexion and 6.4 ± 8.2° of extension, and 9.8 ± 3.8° of contralateral bending. Translational motion of C1 relative to C2 was 7.8 ± 1.5 mm ipsilaterally, 2.2 ± 1.2 mm inferiorly, and 3.3 ± 1.0 mm posteriorly. We believe this is the first study describing 3D dynamic atlantoaxial kinematics under true physiologic conditions in healthy subjects. C1/C2 rotation accounts for approximately half of total head axial rotation. Additionally, C1 undergoes coupled flexion/extension and contralateral bending, in addition to inferior, lateral and posterior translation.     

The region-dependent biphasic viscoelastic properties of human temporomandibular joint discs under confined compression

The objective of this study was to determine the biphasic viscoelastic properties of human temporomandibular joint (TMJ) discs, correlate these properties with disc biochemical composition, and examine the relationship between these properties and disc dynamic behavior in confined compression. The equilibrium aggregate modulus (H_A), hydraulic permeability (k), and dynamic modulus were examined between five disc regions. Biochemical assays were conducted to quantify the amount of water, collagen, and glycosaminoglycan (GAG) content in each region. The creep tests showed that the average equilibrium moduli of the intermediate, lateral, and medial regions were significantly higher than for the anterior and posterior regions (69.75±11.47 kPa compared to 22.0±5.15 kPa). Permeability showed the inverse trend with the largest values in the anterior and posterior regions (8.51±1.36×10^?15 m⁴/Ns compared with 3.75±0.72×10^?15 m⁴/Ns). Discs were 74.5% water by wet weight, 62% collagen, and 3.2% GAG by dry weight. Regional variations were only observed for water content which likely results in the regional variation in biphasic mechanical properties. The dynamic modulus of samples during confined compression is related to the aggregate modulus and hydraulic permeability of the tissue. The anterior and posterior regions displayed lower complex moduli over all frequencies (0.01–3 Hz) with average moduli of 171.8–609.3 kPa compared with 454.6–1613.0 kPa for the 3 central regions. The region of the TMJ disc with higher aggregate modulus and lower permeability had higher dynamic modulus. Our results suggested that fluid pressurization plays a significant role in the load support of the TMJ disc under dynamic loading conditions.     

Oxidative stress and DNA damage in relation to transition metals overload in Abu-Qir Bay,Egypt

The aim of the present study is to evaluate the transition metals overload in Abu-Qir Bay in Egypt, as compared to a less polluted area (reference area) through some biomarkers of oxidative stress. Catalase enzyme activity, malondialdehyde (MDA) concentration and DNA damage (number of apurinic/apyrimidinic sites) were the tested biomarkers. The levels of iron and copper in Mugil cephalus liver tissues were significantly higher in samples from the polluted area as compared to the reference area: Fe: 407 ± 38 vs. 216 ± 21 μg/g wet wt; p = 0.008, Cu: 54 ± 6 vs. 17.7 ± 4 μg/g wet wt; p = 0.0001. This could account for the observed increase in MDA concentration (15.7 ± 5.7 vs. 2.5 ± 0.5 U/g; p = 0.035), and the elevated number of AP sites (13.9 ± 2.6 vs. 0.37 ± 0.2 AP site/1 × 10⁵ bp; p = 0.0001). Similarly, the activity of catalase enzyme responsible for the cellular defense was significantly high (58.3 ± 12.2 vs. 28.4 ± 4.0 U/mg; p = 0.032). The present data indicated a clear relationship between the pollution degree of the above marine environment and both biochemical and molecular responses of the piscine system.     

Ultrasonographic quantification of architectural response in tibialis anterior to neuromuscular electrical stimulation

While muscle contraction in voluntary efforts has been widely investigated, little is known about contraction during neuromuscular electrical stimulation (NMES). The aim of this study was to quantify in vivo muscle architecture of agonist and antagonist muscles at the ankle joint during NMES. Muscle fascicle lengths and pennation angles of the tibialis anterior (TA) and lateral gastrocnemius muscles were assessed via ultrasonography in 8 healthy young males. Measures were obtained during maximal NMES and torque-matched voluntary dorsiflexion contractions. In the TA, NMES induced a shorter fascicle length (67.2 ± 8.1 mm vs 74.6 ± 11.4 mm; p = 0.04) and a greater pennation angle (11.0 ± 2.4° vs 9.3 ± 2.5°; p = 0.03) compared with voluntary torque-matched dorsiflexion contractions. Architectural responses in the antagonist lateral gastrocnemius muscle did not significantly differ from rest or between voluntary and electrically induced contractions (p > 0.05). Contraction of the antagonist muscle was not a contributing factor to a greater fascicle shortening and increased pennation angle in the TA during NMES. TA architectural response during NMES likely arose from the contribution of muscle synergists during voluntary contractions coupled with a potentially localized contractile activity under the stimulation electrodes during NMES induced contractions.     

Primary stability of tibial plateaus under dynamic compression-shear loading in human tibiae – Influence of keel length,cementation area and tibial stem

The objective of our study was to evaluate the impact of the tibial keel & stem length in surface cementation, of a full cemented keel and of an additional tibial stem on the primary stability of a posterior stabilised tibial plateau (VEGA® System Aesculap Tuttlingen, Germany) under dynamic compression-shear loading conditions in human tibiae.We performed the cemented tibial plateau implantations on 24 fresh-frozen human tibiae of a mean donor age of 70.7 years (range 47–97). The tibiae were divided into four groups of matched pairs based on comparable trabecular bone mineral density. To assess the primary stability under dynamic compression shear conditions, a 3D migration analysis of the tibial component relative to the bone based on displacements and deformations and an evaluation of the cement layer including penetration was performed by CT-based 3D segmentation.Within the tested implant fixation principles the mean load to failure of a 28 mm keel and a 12 mm stem (40 mm) was 4700 ± 1149 N and of a 28 mm keel length was 4560 ± 1429 N (p = 0.996), whereas the mean load to failure was 4920 ± 691 N in full cementation (p = 0.986) and 5580 ± 502 N with additional stem (p = 0.537), with no significant differences regarding the dynamic primary stability under dynamic compression-shear test conditions.From our observations, we conclude that there is no significant difference between a 40 mm and a 28 mm tibial keel & stem length and also between a surface and a full cementation in the effect on the primary stability of a posterior stabilised tibial plateau, in terms of failure load, migration characteristics and cement layer thickness including the penetration into the trabecular bone.     

Three-dimensional comparison of static and dynamic scapular motion tracking techniques

The shoulder is complex and comprised of many moving parts. Accurately measuring shoulder rhythm is difficult. To classify shoulder rhythm and identify pathological movement, static measures have been the preferred method. However, dynamic measures are also used and can be less burdensome to obtain. The purpose of this paper was to determine how closely dynamic measures represent static measures using the same acromion marker cluster scapular tracking technique. Five shoulder angles were assessed for 24 participants using dynamic and static tracking techniques during humeral elevation in three planes (frontal, scapular, sagittal). ANOVAs were used to identify where significant differences existed for the factors of plane, elevation angle, and tracking technique (static, dynamic raising, dynamic lowering). All factors were significantly different for all shoulder angles (p < 0.001), except for elevation plane in scapulothoracic protraction/retraction (p = 0.955). Tracking techniques were influential (p < 0.001), but the grouped mean differences fell below a clinically relevant 5° benchmark. There was large variation in mean differences of the techniques across individuals. While population averages are similar, individual static and dynamic shoulder assessments may be different. Caution should be taken when dynamic shoulder assessments are performed on individuals, as they may not reflect those obtained in static scapular motion tracking.     

Grazing-induced morphological and growth rate changes in Anarthrophyllum rigidum,a Patagonian leguminous shrub

Grazing influences the morphology and growth rate of shrubs, and consequently, their population dynamics. It has been shown that grazing directly affects the growth of shrubs. On the other hand, the reduction of grass biomass by herbivores reduces soil–water competition between grasses and shrubs, and indirectly, could enhance the growth of shrubs. However, the assessment of the long-term effects of grazing on the growth of shrubs in the arid Patagonia has been hampered by the lack of long and homogeneous records of plant population dynamics and primary production. In this study, we combined growth-ring and allometric analyses to assess the long-term effect of grazing on individuals of Anarthrophyllum rigidum, a leguminous shrub widely distributed across the Patagonian steppe. A. rigidum has evergreen leaves rich in proteins that constitute an important complement to the diet of sheep, particularly in winter when the abundance of grasses is reduced. Our observations indicate that individuals of A. rigidum nearby the water source used by livestock were smaller in size (35.5 cm vs. 67.39 cm), presented a larger number of basal branches (23 vs. 12), and showed slower rates of growth (8.2 mm year^?1 vs. 14.3 mm year^?1) than individuals located far from the water source. This first quantification of the long-term effects of grazing on A. rigidum in the dry Patagonian steppe suggests that beneficial effects of grazing through the reduction of grasses that compete with shrubs for soil–water should be more obvious for livestock non-preferred than preferred shrubs     

Bone response of broiler chickens (Gallus gallus domesticus) induced by corticosterone

Experiments were conducted with chickens exposed to corticosterone (CORT), with the aim of determining its effects on bone characteristics. At 7 d of age, the experimental birds were injected daily with CORT (4 mg/kg of body mass) for 1 week. CORT administration significantly decreased the body weight while increasing relative liver weight of the chickens and the bone parameters were also decreased. Histology and immunohistochemistry of type X collagen revealed that CORT reduced the lengths of proliferative and prehypertrophic zone in growth plate and the number of positive chondrocytes in the prehypertrophic zone. In conclusion exposure to CORT depressed the growth performance and retarded the longitudinal growth of the long bones by inhibiting the proliferation and differentiation of chondrocytes in growth plate in broilers.     

Performance evaluation of various bioreactors for the removal of Cr(VI) and organic matter from industrial effluent

Performances of various bioreactors under different operating conditions were evaluated with respect to hexavalent chromium (Cr(VI)) reduction and COD removal. Continuous reactor studies were carried out with (i) aerobic suspended growth system, (ii) aerobic attached growth system, and (iii) anoxic attached growth system, using both synthetic and actual industrial wastewater. Arthrobacter rhombi-RE (MTCC7048), a Cr(VI) reducing strain enriched and isolated from chromium contaminated soil, was used in all the bioreactors for Cr(VI) biotransformation and COD removal. Aerobic and anoxic batch experiments were conducted to evaluate the bio-kinetic parameters. The bio-kinetic parameters for aerobic system were: μ_max = 2.34/d, K_s = 190 mg/L (as COD), K_i = 3.8 mg/L of Cr(VI), and Y_T = 0.377. These parameters for anoxic conditions were: μ_max = 0.57/d, K_s = 710 mg/L (as COD), K_i = 8.77 mg/L of Cr(VI), and Y_T = 0.13. Aerobic attached growth system, operated at a hydraulic retention time (HRT) of 24 h and an organic loading rate (OLR) of 3 kg/m³/d, performed better than aerobic suspended and the anoxic attached growth systems operated under identical conditions, while treating synthetic wastewater as well as industrial effluent.     

Dynamic mechanical properties of the tissue-engineered matrix associated with individual chondrocytes

The success of cell-based tissue engineering approaches in restoring biological function will be facilitated by a comprehensive fundamental knowledge of the temporal evolution of the structure and properties of the newly synthesized matrix. Here, we quantify the dynamic oscillatory mechanical behavior of the engineered matrix associated with individual chondrocytes cultured in vitro for up to 28 days in alginate scaffolds. The magnitude of the complex modulus (|E*|) and phase shift (δ) were measured in culture medium using Atomic Force Microscopy (AFM)-based nanoindentation in response to an imposed oscillatory deformation (amplitude ～5 nm) as a function of frequency (f=1–316 Hz), probe tip geometry (2.5 μm radius sphere and 50 nm radius square pyramid), and in the absence and presence of growth factors (GF, insulin growth factor-1, IGF-1, and osteogenic protein-1, OP-1). |E*| for all conditions increased nonlinearly with frequency dependence approximately f^1/2 and ranged between ～1 and 25 kPa. This result, along with theoretical calculations of the characteristic poroelastic relaxation frequency, f_p, (～50–90 Hz) suggested that this time-dependent behavior was governed primarily by fluid flow-dependent poroelasticity, rather than flow-independent viscoelastic processes associated with the solid matrix. |E*(f)| increased, (f) decreased, and the hydraulic permeability, k, decreased with time in culture and with growth factor treatment. This trend of a more elastic-like response was thought to be associated with increased macromolecular biosynthesis, density, and a more mature matrix structure/organization.     

Effects of gender and age on median and ulnar nerve sensory responses over ring finger

ObjectiveTo analyze the effect of gender on median nerve (MN) and ulnar nerve (UN) sensorial responses over ring finger (RF).Materials and methodsResults of individuals admitted to our ENMG laboratory between June 2011 and March 2012 for nerve conduction studies (NCSs) were retrospectively analyzed. Sensory NCSs were performed by standard antidromic technique.ResultsTotally, 112 normal recordings belong to 100 patients were included. Mean antidromic sensory conduction velocity of MNs (wrist-to-second finger) or UNs (wrist-to-fifth finger) was not different between two genders. Mean sensory nerve action potential (SNAP) amplitude of MN from second finger was also not different between two genders. However, mean SNAP amplitude of UN from fifth finger was higher in females. In RF’s sensorial response studies; mean peak latency of MN was similar between females and males (3.05 ± 0.25 ms vs. 3.14 ± 0.29 ms, p = 0.111), whereas one of UN was shorter in females (2.86 ± 0.22 ms vs. 3.04 ± 0.31 ms, p = 0.001). MN to UN latency difference to RF was greater in females than males (0.19 ± 0.15 ms vs. 0.10 ± 0.16 ms, p = 0.007). Mean SNAP amplitude of MN and UN were both higher in females than males (17.9 ± 7.1 μV vs. 14.1 ± 5.5 μV, p = 0.011 and 18.5 ± 8.0 μV vs. 12.9 ± 6.1 μV, p = 0.0009, respectively). All data of NCSs were re-analyzed after adjustment for age, and obtained findings regarding effect of aging are also included.ConclusionGender has a prominent effect on RF’s sensorial responses. Normative values regarding them should be prepared with adjustment for gender.     

Acute severe male hypo-testosteronemia affects central motor command in humans

Purpose: To indirectly evaluate the effect of androgens on neuromuscular system in humans we analyzed if an induced short-term hypogonadal state (serum total testosterone-TT < 2.3 ng/ml) may affect central drive to skeletal muscle and/or muscle neuro-mechanical performance. Methods: We compared voluntary and electrically evoked muscle sEMG signals from biceps brachii in nine hypogonadal male volunteers (Hypo) and in ten healthy controls (Cont). Serum TT and dihydrotestosterone (DHT) were assayed. Results: With respect to Hypo, Cont exhibited significantly higher median frequency content (MDF) at any angular velocity; normalized MDF [95.9% (SD = 23.3) vs 73.8% (SD = 9.3)]; muscle fiber conduction velocity (CV) from lowest to highest angular velocities; initial MDF at fatigue test [91.78 Hz (SD = 22.03) vs 70.94 Hz (SD = 11.06)] as well as was the normalized slope [−0.64 (SD = 0.14 vs −0.5 (SD = 0.11)]. In the non-fatigued state, Hypo showed a slower single twitches time to peak (TTP). In Cont, half relaxation time (HRT) decreased after fatigue while increased in Hypo (p < 0.05 between groups). A significant correlation between both TT and dihydrotestosterone with MDF and CV was found during voluntary contractions only. Conclusions: A brief exposure to very low serum TT concentration in males seem to determine a reduced excitability of the NM system which, in turn, would favor a predominant recruitment of slow twitch MUs.     

Metabolic engineering of Corynebacterium glutamicum for the production of itaconate

The capability of Corynebacterium glutamicum for glucose-based synthesis of itaconate was explored, which can serve as building block for production of polymers, chemicals, and fuels. C. glutamicum was highly tolerant to itaconate and did not metabolize it. Expression of the Aspergillus terreus CAD1 gene encoding cis-aconitate decarboxylase (CAD) in strain ATCC13032 led to the production of 1.4 mM itaconate in the stationary growth phase. Fusion of CAD with the Escherichia coli maltose-binding protein increased its activity and the itaconate titer more than two-fold. Nitrogen-limited growth conditions boosted CAD activity and itaconate titer about 10-fold to values of 1440 mU mg⁻¹ and 30 mM. Reduction of isocitrate dehydrogenase activity via exchange of the ATG start codon to GTG or TTG resulted in maximal itaconate titers of 60 mM (7.8 g l⁻¹), a molar yield of 0.4 mol mol⁻¹, and a volumetric productivity of 2.1 mmol l⁻¹ h⁻¹.     

Evaluation of distant carbon sources in biosurfactant production by a gamma ray-induced Pseudomonas putida mutant

Pseudomonas putida 33 wild strain, subjected to gamma ray mutagenesis and designated as P. putida 300-B mutant was used as microbial rhamnolipid-producer by using distant carbon sources (viz. hydrocarbons, waste frying oils ‘WFOs’, vegetable oil refinery wastes and molasses) in the minimal media under shake flask conditions. The behavior of glucose as co-substrate and growth initiator was examined. The 300-B mutant strain showed its ability to grow on all the substrates tested and produced rhamnolipid surfactants to different extents however; soybean and corn WFOs were observed to be preferred carbon sources followed by kerosene and paraffin oils, respectively. The best cell biomass (3.5 g l⁻¹) and rhamnolipids yield (4.1 g l⁻¹) were obtained with soybean WFO as carbon source and glucose as growth initiator under fed-batch cultivation showing an optimum specific growth rate (μ) of 0.272 h⁻¹, specific product yield (q_p) of 0.318 g g⁻¹ h and volumetric productivity (P_V) of 0.024 g l⁻¹ h. The critical micelle concentration of its culture supernatant was observed to be 91 mg rhamnolipids l⁻¹ and surface tension as 31.2 mN m⁻¹.     

Improvement in natamycin production by Streptomyces natalensis with the addition of short-chain carboxylic acids

Natamycin is an important tetraene (polyene) antibiotic produced in submerged culture by different strains of Streptomyces sp. In the present work, the effects of the addition of short-chain carboxylic acids (acetic, propionic and butyric) on cell growth and the kinetics of natamycin production were investigated during submerged cultivation of Streptomyces natalensis. The addition of acetic and propionic acids showed stimulatory effects on natamycin production when added to the fermentation medium at concentrations below 2 g L^?1 at the beginning of cultivation. In addition, when acetic and propionic acids were added in a mixture (7:1) at a total concentration of 2 g L^?1, antibiotic production increased significantly, reaching 3.0 g L^?1 (approximately 223% and 250% increases in volumetric and specific antibiotic production, respectively, compared with the control culture). Moreover, the addition of carboxylic acids not only increased the antibiotic yield but also decreased the production time from 96 h to only 84 h in shake-flask cultures. A further enhancement in natamycin production was achieved by cultivation in a 2-L stirred-tank bioreactor under controlled pH conditions. The maximum volumetric production of 3.98 g L^?1 was achieved after 84 h in carboxylic acid-supplemented culture (acetate and propionate in a ratio of 7:1).     

Effect of electrocardiographic contamination on surface electromyography assessment of back muscles

The purpose of this study was to demonstrate the relative effect of electrocardiography (ECG) on back muscle surface electromyography (SEMG) parameters and their corresponding sensitivity in low back pain (LBP) assessment.Back muscle SEMG activities were recorded from 17 healthy subjects and 18 chronic LBP patients under static postures (straight sitting and upright standing), and dynamic action (flexion–extension). ECG cancellation based on independent component analysis (ICA) method was performed. Root mean square (RMS) and median frequency (MF) of raw and denoised SEMG data were computed respectively. Multiple comparisons were then performed.A consistent trend of change (increased MF and decreased RMS) followed ECG removal was noticed. In particular, in SEMG measurements under static postures, a significant decrease in RMS (p < 0.05) and increase in MF (p < 0.05) were found in all recording muscle groups. Level of corruption by ECG artifacts on SEMG measurements was found to be more serious and prominent in static postures than that in dynamic action. After ECG removal, significant improvements in the ability of SEMG to discriminate LBP patients from healthy subjects were seen in RMS amplitude recorded while standing (p < 0.05) and MF in all measuring conditions (p < 0.05).This study provides a more complete understanding on the relative effect of ECG contamination on back muscles SEMG parameters and LBP assessment.     

Effect of barley and oats on feed intake,live weight gain and some carcass characteristics of fattening lambs

The influence of whole, crushed and ground barley and oats on intake, performance and carcass characteristics of lambs was examined. A comparison of diets was conducted with individually-fed male and female lambs in six groups. The study was repeated in three successive years (1995–1997) using the same experimental design. A total of 192 lambs of a mean initial age of 74 days (SD 13.0) and live weight 20.6 kg (SD 4.54) were daily fed their respective concentrates, 72 g dry matter (DM)/kg metabolic live weight (kgW^0.75), for 98 days from weaning to slaughter. Hay was provided ad libitum.The lambs adapted more quickly to diets containing barley than to those containing oats. Compared to oats, the total daily DM intake was higher on barley (1162 vs. 990 g DM/lamb, 89 vs. 78 g DM/kgW^0.75, P < 0.001). Hay consumption was significantly lower on oats than on barley (182 vs. 344 g DM/day, P < 0.001). On oats the lambs experienced energy and protein deficiencies with their energy and protein intakes being 20% below feeding recommendations. On the barley diets the energy and protein requirements of the lambs were satisfied. When processed cereals were offered, there was no increase in the total DM, energy or protein intakes. Processing did not improve the organic matter digestibility of barley or oats.The growth rate (P < 0.01), carcass weight (P < 0.001) and slaughter percentage (P < 0.001) were higher on a barley diet than on oats. A barley diet resulted in more kidney fat (P < 0.01) and fattier carcasses. Processing had no positive influence on the live weight gain. On the contrary, lambs receiving crushed or ground barley or oats had a lower final live weight than those receiving whole grains (P < 0.001). The utilisation of whole grain was more efficient than that of processed grain. There were no advantages in processing barley and oats for the feeding of lambs.     

Mechanical performance of cervical intervertebral body fusion devices: A systematic analysis of data submitted to the Food and Drug Administration

Cervical intervertebral body fusion devices (IBFDs) are utilized to provide stability while fusion occurs in patients with cervical pathology. For a manufacturer to market a new cervical IBFD in the United States, substantial equivalence to a cervical IBFD previously cleared by FDA must be established through the 510(k) regulatory pathway. Mechanical performance data are typically provided as part of the 510(k) process for IBFDs. We reviewed all Traditional 510(k) submissions for cervical IBFDs deemed substantially equivalent and cleared for marketing from 2007 through 2014. To reduce sources of variability in test methods and results, analysis was restricted to cervical IBFD designs without integrated fixation, coatings, or expandable features. Mechanical testing reports were analyzed and results were aggregated for seven commonly performed tests (static and dynamic axial compression, compression-shear, and torsion testing per ASTM F2077, and subsidence testing per ASTM F2267), and percentile distributions of performance measurements were calculated. Eighty-three (83) submissions met the criteria for inclusion in this analysis. The median device yield strength was 10,117 N for static axial compression, 3680 N for static compression-shear, and 8.6 N m for static torsion. Median runout load was 2600 N for dynamic axial compression, 1400 N for dynamic compression-shear, and ±1.5 N m for dynamic torsion. In subsidence testing, median block stiffness (Kp) was 424 N/mm. The mechanical performance data presented here will aid in the development of future cervical IBFDs by providing a means for comparison for design verification purposes.