Booster biocides and microfouling

Antifouling (AF) paints are used to prevent the attachment of living organisms to the submerged surfaces of ships, boats and aquatic structures, usually by the release of biocides. Apart from copper, organic booster biocides are the main active components in AF paints, but their use can have a negative impact on the marine environment. The direct effects of biocides on marine bacteria are poorly known. This work investigates the impact of two biocides, viz. diuron and tolylfluanid, on the growth and the viability of marine microorganisms and on their ability to form biofilms. The biocides in solution were found to inhibit growth of two strains of marine bacteria, viz. Pseudoalteromonas and Vibrio vulnificus, at a high concentration (1000 μg ml^?1), but only a small effect on viability was observed. Confocal laser scanning microscopy (CLSM) showed that the booster biocides decreased biofilm formation by both bacteria. At a concentration of 10 μg ml^?1, the biocides inhibited cell attachment and reduced biofilm thickness on glass surfaces. The percentage of live cells in the biofilms was also reduced. The effect of the biocides on two diatoms, Fragilaria pinnata and Cylindrotheca closterium, was also evaluated in terms of growth rate, biomass, chlorophyll a content and attachment to glass. The results demonstrate that diuron and tolylfluanid are more active against diatoms than bacteria.     

Efficacy of three commercially available ballast water biocides against vegetative microalgae, dinoflagellate cysts and bacteria

One proposed solution to the problem of ballast-mediated aquatic invasions involves chemically treating ballast water to kill key target organisms. Here, we examine the efficacy of three commercially available ballast water biocides using vegetative microalgae, dinoflagellate resting cysts and bacteria as test organisms. Chemicals tested were the ballast water biocides SeaKleen^® and Peraclean^® Ocean, and the chlorine dioxide biocide Vibrex^®. Results demonstrate that the applicability of each of the three chemical biocides as a routine ballast water treatment is limited by factors such as cost, biological effectiveness and possible residual toxicity of the discharged ballast water (assessed on the basis of impact on motility of vegetative marine microalgae). Of the three biocides tested, Peraclean^® Ocean appears to hold the most potential; however its effectiveness in shipboard trials is yet to be proven. Peraclean^® Ocean was biodegradable within 2–6 weeks (initial concentration of 200 ppm), could effectively inactivate resting cysts of the marine dinoflagellates Gymnodinium catenatum, Alexandrium catenella and Protoceratium reticulatum at 400 ppm, could control bacterial growth of Escherichia coli, Staphylococcus aureus, Listeria innocua and Vibrio alginolyticus at 125–250 ppm, and could eliminate vegetative dinoflagellate cells at a concentration of 100 ppm. SeaKleen^® eliminated vegetative microalgae at 2 ppm and could control resting cysts of the dinoflagellates G. catenatum and P. reticulatum at a concentration of 6 and 10 ppm, respectively, when exposed for a period of 2 weeks. SeaKleen^® did not inactivate resting cysts of A. catenella at a concentration of 10 ppm and was found to degrade at a rate that could result in the discharge of residual toxic water into the marine environment. Together with the poor bactericidal properties of SeaKleen^® (100–200 ppm required), this may limit the use of this biocide as a routine treatment option. Vibrex^® is not a suitable ballast water treatment option due to the need for hydrochloric acid as an activator, however it was found to be the most effective against bacteria (complete inhibition at 15 ppm) indicating that onboard chlorine dioxide generators may provide an effective bacterial treatment option. The performance of these biocides was adversely influenced by a variety of factors including low water temperatures (6 °C compared to 17 °C), light versus dark conditions, and the presence of humus-rich seawater and ballast water sediments.     

From Broad-Spectrum Biocides to Quorum Sensing Disruptors and Mussel Repellents: Antifouling Profile of Alkyl Triphenylphosphonium Salts

‘Onium’ compounds, including ammonium and phosphonium salts, have been employed as antiseptics and disinfectants. These cationic biocides have been incorporated into multiple materials, principally to avoid bacterial attachment. In this work, we selected 20 alkyl-triphenylphosphonium salts, differing mainly in the length and functionalization of their alkyl chains, in fulfilment of two main objectives: 1) to provide a comprehensive evaluation of the antifouling profile of these molecules with relevant marine fouling organisms; and 2) to shed new light on their potential applications, beyond their classic use as broad-spectrum biocides. In this regard, we demonstrate for the first time that these compounds are also able to act as non-toxic quorum sensing disruptors in two different bacterial models (Chromobacterium violaceum and Vibrio harveyi) as well as repellents in the mussel Mytilus galloprovincialis. In addition, their inhibitory activity on a fouling-relevant enzymatic model (tyrosinase) is characterized. An analysis of the structure-activity relationships of these compounds for antifouling purposes is provided, which may result useful in the design of targeted antifouling solutions with these molecules. Altogether, the findings reported herein provide a different perspective on the biological activities of phosphonium compounds that is particularly focused on, but, as the reader will realize, is not limited to their use as antifouling agents.     

Evaluation of the antifouling properties of 3-alyklpyridine compounds

One of the most promising alternative technologies to antifouling (AF) biocides based on toxic heavy metals lies in the development of natural eco-friendly biocides. The present study evaluates the AF potential of structurally different compounds containing a 3-alkylpyridine moiety. The products, namely poly 3-alkylpyridinium salts, saraine, and haminols, were either extracted or derived from natural sources (the sponges Haliclona sp. and Reniera sarai and the mollusc Haminoea fusari), or obtained by chemical synthesis. All the molecules tested showed generally good anti-settlement activity against larvae of the barnacle Amphibalanus (=Balanus) amphitrite (EC₅₀ values between 0.19 and 3.61?μg?ml^?1) and low toxicity (LC₅₀ values ranging from 2.04 to over 100?μg?ml^?1) with non-target organisms. For the first time, the AF potential of a synthetic monomeric 3-alkylpyridine was demonstrated, suggesting that chemical synthesis is as a realistic way to produce large amounts of these compounds for future research and development of environmentally-friendly AF biocides.     

Adaptation of Campylobacter jejuni to biocides used in the food industry affects biofilm structure,adhesion strength,and cross-resistance to clinical antimicrobial compounds

The emergence of biocide-adapted Campylobacter jejuni strains that developed into biofilms and their potential to develop clinical resistance to antimicrobial compounds was studied. C. jejuni was grown in sub-lethal concentrations of five biocides used in the food industry. C. jejuni exhibited adaptation to these biocides with increased minimum inhibitory concentrations. The 3-D structures of the biofilms produced by the biocide-adapted cells were investigated by atomic force microscopy (AFM). The results revealed marked variability in biofilm architecture, including ice-crystal-like structures. Adaptation to the biocides enhanced biofilm formation, with significant increases in biovolume, surface coverage, roughness, and the surface adhesion force of the biofilms. Adaptation to commercial biocides induced resistance to kanamycin and streptomycin. This study suggests that the inappropriate use of biocides may lead to cells being exposed to them at sub-lethal concentrations, which can result in adaptation of the pathogens to the biocides and a subsequent risk to public health.     

Screening of Marine Algal Extracts for Anti-settlement Activities against Microalgae and Macroalgae

The ban on the use of TBT-based antifouling paints for boats under 25 m in length has lead to a search for new non-toxic antifoulants. One of the most promising alternative technologies to heavy metal based antifouling paint is the development of antifouling coatings whose active ingredients are naturally occurring compounds from marine organisms. This is based on the principle that marine organisms also face the problem of the presence of epibionts on their own surfaces. In this study, the antifouling activity of a series of aqueous, ethanolic and dichloromethane extracts from thirty algae from the North East Atlantic coast was investigated. The extracts were tested in laboratory assays against species representative of two major groups of fouling organisms, viz . macroalgae and microalgae. The activity of several extracts was comparable to that of heavy metals and biocides (such as TBTO and CuSO 4 ) currently used in antifouling paints and their lack of toxicity with respect to the larvae of oysters and sea urchins suggests a potential for novel active ingredients.     

The environmental fate and behaviour of antifouling paint booster biocides: A review

Antifouling paint booster biocides are a group of organic compounds added to antifouling paints to improve their efficacy. They have become prevalent since the requirement for alternative antifouling paints formulations for small boats (< 25 m). This need followed a ban on the use of triorganotin biocides in antifouling paints for small boats, in the late 1980's. Worldwide, around eighteen compounds are currently used as antifouling biocides, viz. benzmethylamide, chlorothalonil, copper pyrithione, dichlofluanid, diuron, fluorofolpet, Irgarol 1051, Sea‐Nine 211, Mancozeb, Polyphase, pyridine‐triphenyl‐borane, TCMS (2,3,5,6‐tetrachloro‐4‐methylsulfonyl) pyridine, TCMTB [2‐(thiocyanomethylthio)benzothia‐zole], Thiram, tolyfluanid, zinc pyrithione (ZPT), ziram and Zineb. Any booster biocide released into the environment is subjected to a complex set of processes. These processes include transport mechanisms, transformation, degradation, cross media partitioning, and bioaccumulation. This paper reviews the fate and behaviour data currently available in the public domain concerning antifouling paint booster biocides.     

Antifouling activity of portimine,select semisynthetic analogues,and other microalga-derived spirocyclic imines

Abstract

A range of natural products from marine invertebrates, bacteria and fungi have been assessed as leads for nature-inspired antifouling (AF) biocides, but little attention has been paid to microalgal-derived compounds. This study assessed the AF activity of the spirocyclic imine portimine (1), which is produced by the benthic mat-forming dinoflagellate Vulcanodinium rugosum. Portimine displayed potent AF activity in a panel of four macrofouling bioassays (EC₅₀ 0.06–62.5?ng?ml^?1), and this activity was distinct from that of the related compounds gymnodimine-A (2), 13-desmethyl spirolide C (3), and pinnatoxin-F (4). The proposed mechanism of action for portimine is induction of apoptosis, based on the observation that portimine inhibited macrofouling organisms at developmental stages known to involve apoptotic processes. Semisynthetic modification of select portions of the portimine molecule was subsequently undertaken. Observed changes in bioactivity of the resulting semisynthetic analogues of portimine were consistent with portimine’s unprecedented 5-membered imine ring structure playing a central role in its AF activity.     

The use of biocides to control sulphate‐reducing bacteria in biofilms on mild steel surfaces

Three different types of biocides, viz. formaldehyde (FM), glutaraldehyde (GA) and isothiozolone (ITZ) were used to control planktonic and sessile populations of two marine isolates of sulphate‐reducing bacteria (SRB). The influence of these biocides on the initial attachment of cells to mild steel surfaces, on subsequent biofilm formation and on the activity of hydrogenase enzymes within developed biofilms was evaluated. In the presence of biocides the rate and degree of colonization of mild steel by SRB depended on incubation time, bacterial isolate and the type of biocide used. Although SRB differed in their susceptibility to biocides, for all isolates the biofilm population was more resistant to the treatment than the planktonic population. GA showed highest efficiency in controlling planktonic and sessile SRB compared with the other two biocides. The activity of the enzyme hydrogenase measured in SRB biofilms varied between isolates and with the biocide treatment. No correlation was found between the number of sessile cells and hydrogenase activity.     

The development of ‘safer’ compounds for biocidal use

It is important that the biocides industry continues, if not accelerates its moves towards the supply of compounds with lower toxicological thresholds and greater environmental acceptability.Over the last few years a number of pesticides have been classified as harmful to the environment. These have been deleted from company product profiles which has meant that companies have been compelled to develop compounds which are ‘safer’ to use. However, it must be remembered that biocides are designed to kill biological material and the development of the non-toxic biocide is a long way from reality.The obvious but most difficult way to approach this problem, is to develop new active ingredients, however, the cost of such activities is now becoming prohibitive. This does not mean that industry will not continue the search for new biocides, on the contrary in this article such a new group is discussed. What it does mean, is that the development of new active ingredients must run concurrently along with modifications to existing biocidal products and methods of manufacture.     

Efficacies of Novel N-Halamine Disinfectants against Salmonella and Pseudomonas Species

Six novel N-halamine compounds of potential importance as disinfectants to the food-processing industry were tested against Salmonella enteritidis, Salmonella gallinarum, Salmonella typhimurium, and Pseudomonas fluorescens in aqueous solution. Inactivation times for 10⁶-fold reductions were determined as a function of water quality at pH 6.5 and 25°C. Phenol coefficients for the efficacies of the compounds against S. enteritidis have been reported also. When both stability and efficacy data are considered, as well as cost of production, two compounds, 1,3-dichloro-2,2,5,5-tetramethylimidazolidin-4-one and 1-chloro-2,2,5,5-tetramethylimidazolidin-4-one, offer the greatest potential as biocides for the food-processing industry.     

Efficacy and Ecotoxicity of Novel Anti-Fouling Nanomaterials in Target and Non-Target Marine Species

Biofouling is a global problem that affects virtually all the immersed structures. Currently, several novel environmentally friendly approaches are being tested worldwide to decrease the toxicity of biocides in non-fouling species, such as the encapsulation/immobilization of commercially available biocides, in order to achieve control over the leaching rate. The present study addresses the toxicity of two widely used booster biocides, zinc pyrithione (ZnPT) and copper pyrithione (CuPT), in its free and incorporated forms in order to assess their toxicity and anti-fouling efficacy in target and non-target species. To achieve this goal, the following marine organisms were tested; the green microalgae Tetraselmis chuii (non-target species) and both target species, the diatom Phaeodactylum tricornutum and the mussel Mytilus edulis. Organisms were exposed to both biocides, two unloaded nanostructured materials and nanomaterials loaded with biocides, from 10 μg/L to 100 mg/L total weight, following standard protocols. The most eco-friendly and simultaneously efficient anti-fouling solution against the two photosynthetic species (nanoclays loaded with ZnPT) was then tested on mussels to assess its lethal efficacy (LC₅₀ = 123 μg/L) and compared with free biocide (LC₅₀ = 211 μg/L) and unloaded material (LC₅₀ > 1000 μg/L). A second exposure test with sub-lethal concentrations (lower than 100 μg/L), using mussels, was carried out to assess biochemical changes caused by the tested compounds. Oxidative stress, detoxification and neurotransmission markers were not responsive; however, different antioxidant patterns were found with free ZnPT and loaded nanoclay exposures. Thus, the immobilization of the biocide ZnPT into nanoclays proved to be a promising efficient and eco-friendly anti-fouling strategy.     

Multistep approach to control microbial fouling of historic building materials by aerial phototrophs

The scientific multistep approach described herein is a result of two years of research into a control method against microbial fouling and biodeterioration of historic building materials by phototrophs. A series of tests were conducted to select the best antifouling agent for eliminating ‘green’ coatings and protecting surfaces against biofouling. Of the seven active compounds, two with the best penetration abilities were subjected to a photosynthetic activity inhibition test using confocal microscopy. Of the two, a quaternary ammonium salt (QAC) – didecyldimethylammonium chloride (DDAC) – was found to be the most effective. Ten biocides containing QACs at different concentrations were then tested against ‘green’ coatings on wood, brick and plaster, with the best four being selected for further research in model conditions. As a result, biocides containing >14% (v v^–1) DDAC were found to be successful antifouling agents for protecting historical materials against biodeterioration by phototrophs.     

The role of melanin in Aspergillus tolerance to biocides and photosensitizers

Cationic biocides are widely utilized for surface disinfection. Photosensitizers such as toluidine blue O (TBO) produce reactive oxygen species following light excitation and are being investigated as novel biocides for similar applications. Aspergillus brasiliensis conidia contain melanin which protects against environmental stressors. The negative charge and antioxidant properties of melanin may confer resistance to photosensitizers and other biocides. In this study, the yeasticidal and fungicidal activity benzalkonium chloride (BZC), sodium dichloroisocyanurate (NaDCC) and TBO with red light were examined using quantitative suspension tests. All three biocides were highly effective against Candida albicans and > 5·0 log₁₀ reductions in viability were attainable within 5 minutes. Wild-type A. brasiliensis conidia were highly tolerant to treatment and 0·4 log₁₀ reductions in viability were observed within the same time frame when treated with TBO or BZC. NaDCC was markedly more effective. Inhibition of melanin biosynthesis by culturing with 100 μg ml⁻¹ kojic acid resulted in a hypopigmented phenotype with significantly increased sensitivity to all three biocides. These observations indicate that melanin is a significant contributor towards A. brasiliensis tolerance of biocides and photosensitizers and demonstrate that cationic biocides are poorly suited to applications where the control of A. brasiliensis is required.     

Exposure of Escherichia coli ATCC 12806 to Sublethal Concentrations of Food-Grade Biocides Influences Its Ability To Form Biofilm,Resistance to Antimicrobials,and Ultrastructure

Escherichia coli ATCC 12806 was exposed to increasing subinhibitory concentrations of three biocides widely used in food industry facilities: trisodium phosphate (TSP), sodium nitrite (SNI), and sodium hypochlorite (SHY). The cultures exhibited an acquired tolerance to biocides (especially to SNI and SHY) after exposure to such compounds. E. coli produced biofilms (as observed by confocal laser scanning microscopy) on polystyrene microtiter plates. Previous adaptation to SNI or SHY enhanced the formation of biofilms (with an increase in biovolume and surface coverage) both in the absence and in the presence (MIC/2) of such compounds. TSP reduced the ability of E. coli to produce biofilms. The concentration of suspended cells in the culture broth in contact with the polystyrene surfaces did not influence the biofilm structure. The increase in cell surface hydrophobicity (assessed by a test of microbial adhesion to solvents) after contact with SNI or SHY appeared to be associated with a strong capacity to form biofilms. Cultures exposed to biocides displayed a stable reduced susceptibility to a range of antibiotics (mainly aminoglycosides, cephalosporins, and quinolones) compared with cultures that were not exposed. SNI caused the greatest increase in resistances (14 antibiotics [48.3% of the total tested]) compared with TSP (1 antibiotic [3.4%]) and SHY (3 antibiotics [10.3%]). Adaptation to SHY involved changes in cell morphology (as observed by scanning electron microscopy) and ultrastructure (as observed by transmission electron microscopy) which allowed this bacterium to persist in the presence of severe SHY challenges. The findings of the present study suggest that the use of biocides at subinhibitory concentrations could represent a public health risk.     

Antifouling enzymes and the biochemistry of marine settlement

Antifouling coatings are used extensively on marine vessels and constructions, but unfortunately they are found to pose a threat to the marine environment, notably due to content of metal-based biocides. Enzymes have repeatedly been proposed as an alternative to traditional antifouling compounds. In this review, the enzymes claimed to hold antifouling activity are classified according to catalytic functions. The enzyme functions are juxtaposed with the current knowledge about the chemistry of settlement and adhesion of fouling organisms. Specific focus will be on bacteria, microalgae, invertebrate larvae and macroalgae zoospores. Two main concepts in enzyme-based antifouling are identified: breakdown of adhesive components and catalytic production of repellent compounds in-situ. The validity of the various modes of action is evaluated and the groups of enzymes with the highest potential are highlighted.     

The need for standardised broad scale bioassay testing: A case study using the red alga Laurencia rigida

Two major problems associated with biofouling studies are the lack of broad scale testing and failure to use consistent standards among different assays or studies. To address these issues the activity of two biologically active natural products, elatol and deschloroelatol, isolated from the marine red alga Laurencia rigida, and three commonly used biocides, Nopcocide N-96?, Irgarol 1051? and Sea-Nine 211?, was compared, in a broad spectrum of bioassays. The activity of the different compounds varied substantially among different bioassay tests. Elatol and deschloroelatol had a narrow range of activity with strongest effects against invertebrate larvae. Both compounds were highly toxic. However, neither compound had strong activity against marine bacteria or the common epiphyte Ulva lactuca. Irgarol 1051 also had a narrow range of activity, only affecting algal settlement strongly. Nopcocide N-96 and Sea-Nine 211 had moderate to strong activity across the spectrum of bioassays, viz. growth of marine bacteria (Vibrio fischeri, Serratia sp.), inhibition of settlement of macroalgae (Ulva lactuca), toxicity (Balanus amphitrite), and inhibition of settlement of invertebrate larvae (Balanus amphitrite, Bugula neritina). Based on the results it is proposed that Sea-Nine 211, because of its broad spectrum activity, be used as a standard for comparative assessments of the antifouling activity of marine natural products and analogues.     

The toxicity of Irgarol 1051 and Sea-Nine 211 to the non-target macroalga Fucus serratus Linnaeus, with the aid of an image capture and analysis system

A programme of research was initiated to provide information on the efficacy of the antifouling agents Irgarol 1051™ and Sea-Nine 211™ to zygotes of the fucoid alga Fucus serratus Linnaeus. The development of methodologies that incorporated the use of image capture and analysis, which minimised the problems of subjectivity and bias that can be typical, are also described. The generation of macro-instructions allowed rapid generation and interpretation of accurate quantitative data. Emphasis was placed on the use of methodologies that did not rely on the subjective determination of spore germination. Consequently, affects due to the biocides were determined that, otherwise, would not have been realised through normal analytical routines.Zygotes were exposed, in static non-renewal systems, for 3 days, to a range of concentrations of biocide dissolved in seawater. Data for seven zygote parameters were recorded daily and values of percentage germination were calculated. From these data, NOEC values of 8 μg l⁻¹ were calculated for both Sea-Nine 211 and Irgarol 1051. An EC₅₀ of 19.4 μg l⁻¹ was also determined for Sea-Nine 211. It is, therefore, suggested that F. serratus zygote germination and early development is unaffected by published environmental concentrations of these biocides. Additionally, it has been demonstrated that the image capture and analysis methodologies developed provide an invaluable tool for use in future bioassays.     

Survival of protozoa in cooling tower biocides

Protozoa from cooling towers may serve as hosts for legionellae, but such protozoa have not been examined with respect to effects of cooling tower biocides. In this study, two ciliate species,Tetrahymena sp andColpoda sp, and two amoebae species,Vannella miroides andAcanthamoeba hatchetti, were isolated from a cooling tower and tested for survival in the presence of four cooling tower biocides. The protozoa were exposed for 24 h to a thiocarbamate compound, an isothiazolone compound, quaternary ammonium compounds (QAC), and tributyltin neodecanoate with quarternary ammonium compounds (TBT/QAC). After exposure, cells were examined for viability. The highest concentration of each biocide in which cells could survive was compared to the manufacturers' recommended maintenance dosage (MRMD) of the biocides.Tetrahymena andColpoda survived concentrations within the range of the MRMD of thiocarbamate and QAC.Vannella andAcanthamoeba survived concentrations within the MRMD of thiocarbamate, isothiazolone, and QAC.Colpoda cysts andAcanthamoebae cysts remained viable after exposure to concentrations much greater than the MRMD of thiocarbamate, isothiazolone, and QAC. None of the protozoa in any stage could survive the MRMD of TBT/QAC. These results show that protozoa indigenous to cooling towers may survive the recommended concentration of certain biocides, and this information may be important in devising procedures for eradicating hosts for legionellae.     

The Use of Machine Learning Methodologies to Analyse Antibiotic and Biocide Susceptibility in Staphylococcus aureus

Background

The rise of antibiotic resistance in pathogenic bacteria is a significant problem for the treatment of infectious diseases. Resistance is usually selected by the antibiotic itself; however, biocides might also co-select for resistance to antibiotics. Although resistance to biocides is poorly defined, different in vitro studies have shown that mutants presenting low susceptibility to biocides also have reduced susceptibility to antibiotics. However, studies with natural bacterial isolates are more limited and there are no clear conclusions as to whether the use of biocides results in the development of multidrug resistant bacteria.

Methods

The main goal is to perform an unbiased blind-based evaluation of the relationship between antibiotic and biocide reduced susceptibility in natural isolates of Staphylococcus aureus. One of the largest data sets ever studied comprising 1632 human clinical isolates of S. aureus originated worldwide was analysed. The phenotypic characterization of 13 antibiotics and 4 biocides was performed for all the strains. Complex links between reduced susceptibility to biocides and antibiotics are difficult to elucidate using the standard statistical approaches in phenotypic data. Therefore, machine learning techniques were applied to explore the data.

Results

In this pioneer study, we demonstrated that reduced susceptibility to two common biocides, chlorhexidine and benzalkonium chloride, which belong to different structural families, is associated to multidrug resistance. We have consistently found that a minimum inhibitory concentration greater than 2 mg/L for both biocides is related to antibiotic non-susceptibility in S. aureus.

Conclusions

Two important results emerged from our work, one methodological and one other with relevance in the field of antibiotic resistance. We could not conclude on whether the use of antibiotics selects for biocide resistance or vice versa. However, the observation of association between multiple resistance and two biocides commonly used may be of concern for the treatment of infectious diseases in the future.