Polymorphism of actin paracrystals induced by polylysine

We describe a method for the induction of different polymorphic forms of actin filament paracrystals. This polymorphism is probably based on differences in the stagger and/or polarity of adjacent filaments in single-layered paracrystals and by superposition of different layers in multilayered paracrystals. The helical parameters defining the filament geometry are indistinguishable for the different polymorphic forms observed and for the four different actins used. Analysis of these paracrystals, some of which are ordered to better than 2.5 nm, should provide a reference structure suitable for alignment and orientation within the actin filament of high resolution models of the actin monomer obtained from crystal data.     

Isolation and characterization of chromaffin granules from a pheochromocytoma (PC 12) cell line

Incubation of rat kangaroo PtK2 cells with increasing concentrations of dimethylsulfoxide (DMSO) in the growth medium results in striking rearrangements of actin containing structures. After 1 h at concentrations of DMSO between 7.5 and 15%, immunofluorescence microscopy reveals actin containing inclusions within the nucleus of a large proportion of interphase cells. These paracrystals, which seem identical to those described by Fukui by electron microscopy [1], appear not to contain the microfilament-associated proteins tropomyosin, α-actinin or myosin and disappear within 1 h when the cells are shifted to normal medium. Electron microscopy confirms the intranuclear location. At concentrations above 20% DMSO the cells do not recover upon incubation in DMSO-free medium. When DMSO is present at a concentration of 50% the cells appear fixed, no paracrystals are formed and the actin profile resembles that seen in normal cells. Nuclear actin inclusions which appear similar to those induced by DMSO are also found upon incubation of PtK2 cells with the ionophore A23187 in the presence of high levels of magnesium ions. These conditions also result in striking morphological changes of the PtK2 cells. The data suggest that A23187 and DMSO may affect cellular morphology by changing the permeability of the cell to divalent cations, and that at least some of the actin found in the nuclear inclusions is of cytoplasmic origin.     

Serotonin induced actin polymerization and association with cytoskeletal elements in cultured bovine aortic endothelium

Serotonin, (5-hydroxytryptamine, 5-HT) binds to cultured endothelial cell stress fibers as identified by fluorescence microscopy and in vitro induces actin polymerization as measured by DNase 1 inhibition and differential centrifugation; the structural change in actin in the presence of 5-HT resembles actin paracrystals as visualized by negative staining under electron microscopy. These observations indicate that 5-HT, which is taken up by endothelium by a non-mediated diffusion, may interact directly with actin to affect cytoskeletal changes.     

Organization and expression of Drosophila tropomyosin genes

It has been shown (Jockusch &; Isenberg, 1981) that vinculin (130K protein) binds to actin and induces actin filaments to form bundles even at low ionic strength. Here, we present structural details on the vinculin molecule itself and on its interaction with actin. In negatively stained preparations, vinculin appeared as a globular protein with an average diameter of 85 Å. The ability of vinculin to form actin filament bundles was confirmed using shadowing techniques and gel analysis of sedimented material. Analysis of vinculin-induced paracrystals by optical diffraction and computer processing revealed their structural similarity to Mg-induced paracrystals. The lateral position of vinculin on surface-exposed actin filaments of such paracrystals was demonstrated directly in electron micrographs and indirectly by labelling vinculin with ferritin-coupled anti-vinculin F(ab′) fragments. Polymerization of actin in the presence of vinculin-coated polystyrene beads did not result in an “end-on” binding of filaments to the beads. Rather, actin bundles were laterally associated with the whole surface of the beads, from where they radiated in a star-like pattern. The growth of actin filaments onto myosin subfragment-I decorated, vinculin-incubated. fixed filament fragments was not inhibited, as was shown directly by electron microscopy and monitored viscometrically in a nucleation assay. These results suggest that in vivo at the site of an adhesion plaque vinculin may link actin filaments together into a suitable configuration to interact with the plasma membrane.     

Comparative electron microscopic study on projectin and titin binding to F-actin

Using the system of F-actin paracrystals, we have obtained electron microscopic evidence that projectin from synchronous flight muscles of Locusta migratoria binds to actin filaments in the same fashion as skeletal titin. Control actin paracrystals formed in the presence of Mg(2+) ions have great width and length and blunted ends. The addition of either projectin or titin results in disruption of compact ordered packing of F-actin in paracrystals and leads to the formation of loose filament bundles with smaller diameters and tapered ends. It is also accompanied with the appearance of individual actin filaments in considerable amounts. The effect becomes more pronounced with the increase in concentrations of added projectin or titin. Possible physiological implications of projectin-actin interactions are discussed.     

Actin paracrystal induction by forskolin and by db-cAMP in CHO cells

Forskolin, a hypotensive diterpine, is assumed to be a potent activator of adenylate cyclase leading to increased levels of cAMP. When this drug is used at 10(-5) M on CHO-C14 cells in culture, it induces within 15 min actin paracrystals in all cells. At this time the paracrystals are mostly situated close to the cell periphery. Electron microscopy (EM) shows structures typical of actin paracrystals. Scanning electron microscopy (SEM) reveals a reduction in surface microvilli and blebs. Identical results can be obtained by adding 1 mM db-cAMP to the culture medium directly. The paracrystals are observed within 15 min and thus represent one of the earliest ultrastructural changes so far described for reverse transformation of CHO cells by db-cAMP. The microtubular and vimentin profiles appear unchanged by forskolin treatment of CHO-K1 cells. Out of currently unknown reasons forskolin does not induce the actin transformation in several other commonly used cell lines.     

Conformation changes of actin during formation of filaments and paracrystals and upon interaction with DNase I, cytochalasin B, and phalloidin

Spin labels attached to rabbit muscle actin became more immobilized upon conversion of actin from the G state to the F state with 50 mM KCl. Titration of G-actin with MgCl2 produced F-actin-like EPR spectra between 2 and 5 mM-actin filaments by electron microscopy. Higher concentrations of MgCl2 produced bundles of actin and eventually paracrystals, accompanied by further immobilization of spin labels. The effects of MgCl2 and KCl were competitive: addition of MgCl2 to 50 mM could convert F-actin (50 mM KCl) to paracrystalline (P) actin; the reverse titration (0 to 200 mM KCl in the presence of 20 mM MgCl2) was less complete. Addition of DNase I to G- or F-actin gave the expected amorphous electron micrographic pattern, and the actin was not sedimentable at (400,000 x g x h). EPR showed that the actin was in the G conformation. Addition of DNase I to paracrystalline actin gave the F conformation (EPR) but the actin was "G" by electron microscopy. Phalloidin converted G-actin to F-actin, had no effect on F-actin, and converted P-actin to the F state by electron microscopy but maintained the P conformation by EPR. Cytochalasin B produced no effects observable by EPR or centrifugation but "untwisted" paracrystals into nets. Since actin retained its P conformation by EPR in two states which were morphologically not P, we conclude that the P state is a distinct conformation of the actin molecule and that actin filaments aggregate to form bundles (and eventually paracrystals) when actin monomers are able to enter the P conformation.     

Helical disorder and the filament structure of F-actin are elucidated by the angle-layered aggregate

Angle-layered aggregates of F-actin are net-like structures induced by Mg2+ concentrations below that used to form paracrystals. These aggregates incorporate the angular disorder of subunits, which has been described elsewhere for isolated actin filaments. Because this disorder is incorporated into the aggregates in solution at the time they are formed, the possibility of negative stain preparation being responsible for the disorder is excluded. The simple two-layered geometry of the angle-layered aggregate provides information about the shape of the component actin filaments free from the superposition of large numbers of layers. A model for the filament shape, derived from single filaments and confirmed by the angle-layered aggregate, is different from those that have previously emerged from paracrystal studies. An understanding of the interfilament bond in both the angle-layered aggregate and the paracrystal allows one to reconcile these different models. We have found a bipolar bonding rule, with staggered crossover points in the angle-layered aggregate, which we suggest is also responsible for Mg2+ paracrystals. This bonding rule can explain the apparent alignment of crossover points in adjacent filaments in paracrystals as a consequence of the superposition of staggered filaments.     

Arthrin: a new actin-like protein in insect flight muscle

There are one or more proteins of 50,000 to 60,000 Mr in the thin filaments of insect flight muscle. A protein of 55,000 Mr has been isolated from insect fibrillar flight muscle and called arthrin. Despite its higher molecular weight, arthrin is in many ways like actin. The amino acid composition of arthrin was similar to that of actin. There were similarities in the peptides produced by digesting the denatured proteins and mild digestion of polymerized proteins cleaved similar-sized fragments from arthrin and actin. Polymerized arthrin activated the Mg2+ ATPase of myosin to the same extent as actin and the ATPase was regulated by rabbit or Lethocerus troponin and tropomyosin. Arthrin did not itself act as troponin-T. Electron microscopy of negatively stained specimens showed that arthrin and actin filaments were similar in structure and that arthrin could be decorated by rabbit subfragment-1 to form normal-looking arrowheads. Arthrin formed paracrystals at an optimum concentration of MgCl2 (25 mM) that was somewhat lower than the optimum for actin paracrystals. Optical diffraction showed that the structure of the paracrystals was similar to those formed from actin. The mass of arthrin and actin filaments relative to phage fd was measured by scanning transmission electron microscopy; the relative mass of arthrin and actin was 1.33, in agreement with molecular weight estimations. Therefore arthrin has the properties of a heavy form of actin. The proportion of actin, arthrin and troponin-T in Lethocerus myofibrils was six moles of actin to one mole of arthrin and one mole of troponin-T. The function of arthrin is not known.     

Structure of actin paracrystals induced by nerve growth factor

When nerve growth factor is added to F-actin, well-ordered bundles of filaments are formed. These bundles are observed even at low concentrations of NGF²¹, but when N-bromosuccinimide-treated NGF, a biologically inactive form of the protein is used, a much higher concentration is required to produce aggregation. Moreover, the bundles induced by the modified NGF are not very well ordered and show amorphous aggregates attached at various points.Electron microscopy of paracrystals induced by native NGF shows that, although they resemble pure actin paracrystals induced by Mg²⁺, the interfilament spacing is larger and bridges connect the filaments. Optical diffraction patterns show, in addition to the off-meridional reflections characteristic of the actin helix, meridional reflections on the first and fourth layer-lines, at axial spacings of 37 and 9 nm. Measurements of the axial positions of the layer-lines show that the actin helical symmetry is not significantly different from that in pure actin paracrystals. The presence of the meridional reflections indicates that groups of two or three bridges with spacing 9 nm or nearly 9 nm are arranged along the bundles at a repeating interval of 37 nm.Actin filament bundles have been observed in several non-muscle cells, and specific actin-binding proteins have been identified as responsible for this aggregation. Our in vitro observations show that the biologically active form of NGF interacts with actin and organizes it into well-ordered paracrystalline arrays. The in vitro formation of NGF-actin complexes may be related to the in vivo mechanism of action of this growth factor.     

Three different actin filament assemblies occur in every hair cell: each contains a specific actin crosslinking protein

The apex of hair cells of the chicken auditory organ contains three different kinds of assemblies of actin filaments in close spatial proximity. These are (a) paracrystals of actin filaments with identical polarity in stereocilia, (b) a dense gellike meshwork of actin filaments forming the cuticular plate, and (c) a bundle of parallel actin filaments with mixed polarities that constitute the circumferential filament belt attached to the cytoplasmic aspect of the zonula adhaerens (ZA). Each different supramolecular assembly of actin filaments contains a specific actin filament cross-linking protein which is unique to that particular assembly. Thus fimbrin appears to be responsible for paracrystallin packing of actin filaments in stereocillia; an isoform of spectrin resides in the cuticular plate where it forms the whisker-like crossbridges, and alpha actinin is the actin crosslinking protein of the circumferential ZA bundle. Tropomyosin, which stabilizes actin filaments, is present in all the actin filament assemblies except for the stereocilia. Another striking finding was that myosin appears to be absent from the ZA ring and cuticular plate of hair cells although present in the ZA ring of supporting cells. The abundance of myosin in the ZA ring of the surrounding supporting cells means that it may be important in forming a supporting tensile cellular framework in which the hair cells are inserted.     

Orientation of skeletal muscle actin in strong magnetic fields

Measurement of birefringence is used to follow actin filament and paracrystal formation in a strong magnetic field. Both F-actin and paracrystals orientate parallel to the field. This confirms that globular proteins arranged in filamentous assemblies can orientate in magnetic fields. This is consistent with the alpha-helical component of the actin subunits being approximately aligned along the actin filament.     

The 3' terminal sequence of chicken ovalbumin messenger RNA and its comparison with other messenger RNA molecules.

The subcellular distribution of actin in embryonic chick fibroblasts and brain was examined biochemically. Several gentle extraction procedures, which did not cause the breakdown of muscle filamentous actin, caused the release of large amounts of “cytoplasmic actin” in a monomeric form. This did not behave as a precursor or degradation product of filamentous actin in pulse label experiments and failed to form filaments under the same conditions as muscle actin. However, when it was purified and concentrated it was able to form aggregates which were very similar to paracrystals of muscle filamentous actin. These results suggest that cytoplasmic actin is at a higher concentration than muscle actin before it will polymerize, and that in the cell much of it is either monomeric or in a labile state.     

A new simple method of preparing actin from chicken gizzard

A simple method for preparing actin from chicken gizzard was described. This method takes advantage of a property of gizzard tropomyosin, that is, that it does not form Mg paracrystals readily.     

Actin in Pumpkin Phloem Exudate

When analyzing cytoskeletal proteins in Cucurbita pepo phloem exudate by immunoblotting, we detected actin in an amount comparable to that in some plant tissues and a small amount of -tubulin. Electron-microscopic examination of the exudate permitted us to observe filaments that were capable of interacting with the myosin subfragment S1 from rabbit skeletal muscle and with phalloidin conjugated with colloidal gold. The addition of 0.5 mM phalloidin to the exudate in the medium containing 20 mM dithiothreitol (DTT) resulted in an increased number of filaments. Since high DTT concentrations induce a breakdown of filaments of the phloem protein PP1, it seems likely that the produced filaments were composed of actin. The addition of 50 mM MgCl₂ to the exudate resulted in the formation of dense bundles and paracrystals, which resembled those produced by muscle actin under similar conditions. Our results demonstrated that actin in phloem sap was capable of polymerization with filament formation.     

Fibroblast spreading in the presence of cytochalasin D: immunoelectron microscopy of the cytoskeleton

Spreading of mouse embryo fibroblasts in the presence of cytochalasin D (1 microgram/ml) was studied using scanning electron microscopy, immunofluorescence, and electron microscopy of platinum replicas. Whereas circular lamellae were formed around the cell body during normal spreading, separate processes appeared at the cell periphery during spreading in cytochalasin-containing medium. The processes gradually elongated and branched. Cytoskeletons of fibroblasts spreading in the cytochalasin-containing medium were obtained by Triton X-100 extraction. They contained microtubules, intermediate filaments, actin "paracrystals" looking like short microfilament bundles, and patches of a meshwork-granular material. Immunogold coating of the cytoskeletons with anti-actin antibody showed that some meshwork-granular patches were decorated with gold particles, whereas the others were not. Non-actin patches were usually located on the distal ends of the processes, thus leaving behind the actin cytoskeletal components during the process growth. Another characteristic feature of this unidentified material is its usual association with the substratum and microtubules. These results suggest that the process protrusion during cell spreading in cytochalasin-containing medium may occur not due to actin polymerization as in the control cells, but due to involvement of some other non-actin cytoskeletal components. These components seem to be able to move along microtubules and to bind to the substratum.     

Electron microscopic analysis of tropomyosin paracrystals.

Negatively stained images of divalent cation-induced tropomyosin paracrystals show polymorphic patterns which are almost bipolar. Although these bipolar forms are naturally due to antiparallel arrays of molecules, the precise molecular arrangements have not been clarified yet except in the case of one type of these polymorphic paracrystals by Stewart and McLachlan [(1976) J. Mol. Biol. 103, 251--269]. In the previous paper we showed that the lead-induced polar paracrystal is a parallel and in-register array of tropomyosin molecules. Moreover, we have made it possible to locate a given residue on the staining pattern. By overlapping two photographic transparencies of the polar paracrystal antiparallel, directly observed images of polymorphic bipolar paracrystals could be synthesized photographically with fidelity. The overlap length between N-terminals of antiparallel pairs of molecules could be easily determined without any assumptions. Next, we considered the stabilizing forces involved in the morphogenesis of such polymorphic paracrystals. The cation-bridged attractive forces already proposed by some groups were insufficient to account for the stability of some specific forms of tropomyosin paracrystals. From the primary amino acid sequence of tropomyosin, we calculated the changes of repulsive forces between the basic residues with changes of molecular overlap length between the N-terminals of antiparallel pairs. By setting the values of charge appropriately, we could account well for the stability of the polymorphic structures observed by electron microscopy.     

Light meromyosin paracrystal formation

Studies of paracrystal formation by column purified light meromyosin (LMM) prepared in a variety of ways led to the following conclusions: (a) different portions of the myosin rod may be coded for different stagger relationships. This was concluded from observations that paracrystals with different axial repeat periodicities could be obtained either with LMM framents of different lengths prepared with the same enzyme, or with LMM fragments of identical lengths but prepared with different enzymes. (b) Paracrystals with a 14-nm axial repeat periodicity are most likely formed by the aggregation of sheets with a 44-nm axial repeat within the sheets which are staggered by 14 nm. All of the axial repeat patterns expected from one sheet or aggregates of more than one sheet, on this basis, were observed in the same electron micrograph. (c) C-protein binding probably occurs preferentially to LMM molecules related in some specific way. This was concluded from the observation that the same axial repeat pattern was obtained in paracrystals formed from different LMM preparations in the presence of C-protein, regardless of differences in the axial repeat obtained in the absence of C-protein. (d) Nucleic acid is responsible for the 43-nm axial repeat patterns observed in paracrystals formed by the ethanol-resistant fraction of LMM. In the absence of nuclei acid, paracrystals with a 14nm axial repeat are obtained. (e) The 43-nm axial repeat pattern observed with the ethanol-resistant fraction of LMM is different for LMM preparations obtained by trypsin and papain digestions.     

Isolation and some structural and functional properties of macrophage tropomyosin

Tropomyosin purified from rabbit lung macrophages is very similar in structure to other nonmuscle cell tropomyosins. Reduced and denatured, the protein has two polypeptides which migrate during electrophoresis in sodium dodecyl sulfate on polyacrylamide gels with slightly different mobilities corresponding to apparent Mr's of about 30 000. Following cross-linking by air oxidation in the presence of CuCl2, electrophoresis under nonreducing conditions reveals a single polypeptide of Mr 60 000. Macrophage tropomyosin has an isoelectric point of 4.6 and an amino acid composition similar to other tropomyosins. It contains one cysteine residue per chain. In the electron microscope, macrophage tropomyosin molecules rotary shadowed with platinum and carbon are slender, straight rods, 33 nm in length. Macrophage tropomyosin paracrystals grown in high magnesium concentrations have an axial periodicity of 34 nm. On the basis of yields from purification and from two-dimensional electrophoretic analyses of macrophage extracts, tropomyosin comprises less than 0.2% of the total macrophage protein, a molar ratio of approximately 1 tropomyosin molecule to 75 actin monomers in the cell. Macrophage tropomyosin binds to actin filaments. Macrophage, skeletal muscle, and other nonmuscle cell tropomyosins inhibit the fragmentation of actin filaments by the Ca2+-gelsolin complex. The finding implies that tropomyosin may have a role in stabilizing actin filaments in vivo.     

Exportin 6: a novel nuclear export receptor that is specific for profilin.actin complexes

Active macromolecular transport between the nucleus and cytoplasm proceeds through nuclear pore complexes and is mostly mediated by transport receptors of the importin beta-superfamily. Here we identify exportin 6 (Exp6) as a novel family member from higher eukaryotes and show that it mediates nuclear export of profilin.actin complexes. Exp6 appears to contact primarily actin, but the interaction is greatly enhanced by the presence of profilin. Profilin thus functions not only as the nucleotide exchange factor for actin, but can also be regarded as a cofactor of actin export and hence as a suppressor of actin polymerization in the nucleus. Even though human and Drosophila Exp6 share only approximately 20% identical amino acid residues, their function in profilin.actin export is conserved. A knock-down of Drosophila Exp6 by RNA interference abolishes nuclear exclusion of actin and results in the appearance of nuclear actin paracrystals. In contrast to a previous report, we found no indications of a major and direct role for CRM1 in actin export from mammalian or insect nuclei.