Single Amino Acid Mutations in Drosophila Fascin Disrupt Actin Bundling Function in Vivo

Fascins bundle actin filaments into large, tightly packed hexagonal arrays that support diverse cellular processes including microvillar projections and filopodial extensions. In Drosophila, fascin is encoded by the singed locus. Severe singed mutants have gnarled bristles and are female sterile due to a defect in rapid cytoplasm transport during oogenesis. In this paper, we report the results of a large EMS mutagenesis screen to generate new singed alleles. A mutation that changes glycine 409 to glutamic acid results in partial inactivation of fascin in vivo, singed(G409E) mutants have kinked bristles and are fertile with a mild nurse cell cytoplasm transport defect. This mutation is in a small conserved domain near the C-terminus of fascin. A mutation that changes serine 289 to asparagine almost completely inactivates fascin in vivo, singed(S289N) mutants have gnarled bristles and are sterile due to a severe defect in nurse cell cytoplasm transport caused by the absence of nurse cell cytoplasmic actin bundles. A subsequent EMS mutagenesis screen for dominant suppressors of singed(S289N) sterility revealed an intragenic suppressor mutation that changes serine 251 to phenylalanine and restores much of fascin's function. These two mutations, S289N and S251F, draw attention to a central domain in fascin.     

Regulation of actin filament cross-linking and bundle shape in Drosophila bristles

Previous studies demonstrate that in developing Drosophila bristles, two cross-linking proteins are required sequentially to bundle the actin filaments that support elongating bristle cells. The forked protein initiates the process and facilitates subsequent cross-linking by fascin. Using cross-linker-specific antibodies, mutants, and drugs we show that fascin and actin are present in excessive amounts throughout bundle elongation. In contrast, the forked cross-linker is limited throughout bundle formation, and accordingly, regulates bundle size and shape. We also show that regulation of cross-linking by phosphorylation can affect bundle size. Specifically, inhibition of phosphorylation by staurosporine results in a failure to form large bundles if added during bundle formation, and leads to a loss of cross-linking by fascin if added after the bundles form. Interestingly, inhibition of dephosphorylation by okadaic acid results in the separation of the actin bundles from the plasma membrane. We further show by thin section electron microscopy analysis of mutant and wild-type bristles that the amount of material that connects the actin bundles to the plasma membrane is also limited throughout bristle elongation. Therefore, overall bundle shape is determined by the number of actin filaments assembled onto the limited area provided by the connector material. We conclude that assembly of actin bundles in Drosophila bristles is controlled in part by the controlled availability of a single cross-linking protein, forked, and in part by controlled phosphorylation of cross-links and membrane actin connector proteins.     

F actin bundles in Drosophila bristles. I. Two filament cross-links are involved in bundling

Transverse sections though Drosophila bristles reveal 7-11 nearly round, plasma membrane-associated bundles of actin filaments. These filaments are hexagonally packed and in a longitudinal section they show a 12-nm periodicity in both the 1.1 and 1.0 views. From earlier studies this periodicity is attributable to cross-links and indicates that the filaments are maximally cross-linked, singed mutants also have 7-11 bundles, but the bundles are smaller, flattened, and the filaments within the bundles are randomly packed (not hexagonal); no periodicity can be detected in longitudinal sections. Another mutant, forked (f36a), also has 7-11 bundles but even though the bundles are very small, the filaments within them are hexagonally packed and display a 12-nm periodicity in longitudinal section. The singed-forked double mutant lacks filament bundles. Thus there are at least two species of cross-links between adjacent actin filaments. Hints of why two species of cross-links are necessary can be gleaned by studying bristle formation. Bristles sprout with only microtubules within them. A little later in development actin filaments appear. At early stages the filaments in the bundles are randomly packed. Later the filaments in the bundles become hexagonally packed and maximally cross-linked. We consider that the forked proteins may be necessary early in development to tie the filaments together in a bundle so that they can be subsequently zippered together by fascin (the singed gene product).     

The Drosophila javelin gene encodes a novel actin-associated protein required for actin assembly in the bristle

The Drosophila melanogaster bristle is a highly polarized cell that builds specialized cytoskeletal structures. Whereas actin is required for increasing bristle length, microtubules are essential for bristle axial growth. To identify new proteins involved in cytoskeleton organization during bristle development, we focused on identifying and characterizing the javelin (jv) locus. We found that in a jv mutant, the bristle tip is swollen and abnormal organization of bristle grooves is seen over the entire bristle. Using confocal and electron microscopy, we found that in jv mutant bristles, actin bundles do not form properly due to a loss of actin filaments within the bundle. We show that jv is an allele of the predicted CG32397 gene that encodes a protein with no homologs outside insects. Expression of the Jv protein fused to a green fluorescent protein (GFP) shows that the protein is colocalized with actin bundles in the bristle. Moreover, expression of Jv-GFP within the germ line led to the formation of ectopic actin bundles that surround the nucleus of nurse cells. Thus, we report that Jv is a novel actin-associated protein required for actin assembly during Drosophila bristle development.     

Actin filament turnover regulated by cross-linking accounts for the size, shape, location, and number of actin bundles in Drosophila bristles

Drosophila bristle cells are shaped during growth by longitudinal bundles of cross-linked actin filaments attached to the plasma membrane. We used confocal and electron microscopy to examine actin bundle structure and found that during bristle elongation, snarls of uncross-linked actin filaments and small internal bundles also form in the shaft cytoplasm only to disappear within 4 min. Thus, formation and later removal of actin filaments are prominent features of growing bristles. These transient snarls and internal bundles can be stabilized by culturing elongating bristles with jasplakinolide, a membrane-permeant inhibitor of actin filament depolymerization, resulting in enormous numbers of internal bundles and uncross-linked filaments. Examination of bundle disassembly in mutant bristles shows that plasma membrane association and cross-bridging adjacent actin filaments together inhibits depolymerization. Thus, highly cross-bridged and membrane-bound actin filaments turn over slowly and persist, whereas poorly cross-linked filaments turnover more rapidly. We argue that the selection of stable bundles relative to poorly cross-bridged filaments can account for the size, shape, number, and location of the longitudinal actin bundles in bristles. As a result, filament turnover plays an important role in regulating cytoskeleton assembly and consequently cell shape.     

Long continuous actin bundles in Drosophila bristles are constructed by overlapping short filaments

The actin bundles essential for Drosophila bristle elongation are hundreds of microns long and composed of cross-linked unipolar filaments. These long bundles are built from much shorter modules that graft together. Using both confocal and electron microscopy, we demonstrate that newly synthesized modules are short (1-2 microm in length); modules elongate to approximately 3 microm by growing over the surface of longitudinally adjacent modules to form a graft; the grafted regions are initially secured by the forked protein cross-bridge and later by the fascin cross-bridge; actin bundles are smoothed by filament addition and appear continuous and without swellings; and in the absence of grafting, dramatic alterations in cell shape occur that substitutes cell width expansion for elongation. Thus, bundle morphogenesis has several components: module formation, elongation, grafting, and bundle smoothing. These actin bundles are much like a rope or cable, made by overlapping elements that run a small fraction of the overall length, and stiffened by cross-linking.     

F-actin bundles in Drosophila bristles are assembled from modules composed of short filaments

The actin bundles in Drosophila bristles run the length of the bristle cell and are accordingly 65 microns (microchaetes) or 400 microns (macrochaetes) in length, depending on the bristle type. Shortly after completion of bristle elongation in pupae, the actin bundles break down as the bristle surface becomes chitinized. The bundles break down in a bizarre way; it is as if each bundle is sawed transversely into pieces that average 3 microns in length. Disassembly of the actin filaments proceeds at the "sawed" surfaces. In all cases, the cuts in adjacent bundles appear in transverse register. From these images, we suspected that each actin bundle is made up of a series of shorter bundles or modules that are attached end-to-end. With fluorescent phalloidin staining and serial thin sections, we show that the modular design is present in nondegenerating bundles. Decoration of the actin filaments in adjacent bundles in the same bristle with subfragment 1 of myosin reveals that the actin filaments in every module have the same polarity. To study how modules form developmentally, we sectioned newly formed and elongating bristles. At the bristle tip are numerous tiny clusters of 6-10 filaments. These clusters become connected together more basally to form filament bundles that are poorly organized, initially, but with time become maximally cross-linked. Additional filaments are then added to the periphery of these organized bundle modules. All these observations make us aware of a new mechanism for the formation and elongation of actin filament bundles, one in which short bundles are assembled and attached end-to-end to other short bundles, as are the vertical girders between the floors of a skyscraper.     

Expression of the 53 kD forked protein rescues F-actin bundle formation and mutant bristle phenotypes in Drosophila.

forked mutations affect bristle development in Drosophila pupae, resulting in short, thick, gnarled bristles in the adult. The forked proteins are components of 200-300-microm-long actin fiber bundles that are present transiently during pupal development [Petersen et al., 1994: Genetics 136:173-182]. These bundles are composed of segments of 3-10 microm long, and forked protein is localized along the actin fiber bundle segments and accumulates at the junctions connecting them longitudinally. In the forked mutants, f(36a) and f(hd), F-actin bundles are greatly reduced in number and size, and bundle segmentation is absent. The p-element, P[w(+), falter] contains a 5.3-kb fragment of the forked gene that encodes the 53-kD forked protein [Lankenau et al., 1996: Mol Cell Biol 16:3535-3544]. Expression of only the 53-kD forked protein is sufficient to rescue the actin bundle and bristle phenotypes of f(36a) and f(hd) mutant flies. The 5.3-kb forked sequence, although smaller than the 13-kb region previously shown to rescue forked mutants [Petersen et al., 1994: Genetics 136:173-182], does contain the core forked sequence that encodes actin binding and bundling domains in cultured mammalian cells [Grieshaber and Petersen, 1999: J Cell Sci 112:2203-2211]. These data show that the 53-kD forked protein is sufficient for normal bristle development and that the domains shown previously to be important for actin bundling in cell culture may be all that are required for normal actin bundle formation in developing Drosophila bristles.     

The fine structure of developing bristles in wild type and mutant Drosophila melanogaster

In an attempt to understand the factors involved in morphogenesis of a complex cell like a scale or bristle, the fine structure of the normal development of bristle cells in Drosophila melanogaster (Oregon R) has been studied and compared with that of the mutants sn³ and Sb. In the development of the normal bristle rounded bundles of longitudinally oriented fibrils lie just beneath the cell surface at regularly spaced intervals. Fiber bundles constitute about 20% of the cross sectional area. The cytoplasmic surface between these bundles is active in enveloping the nerve fiber associated with the bristle and in sending out cytoplasmic processes associated with which the longitudinally oriented bristle ridges form. Singed bristles are bent and twisted and the fiber bundles are present as flattened bands constituting only about 5% of the cross-sectional area. In Sb mutants the total cross-sectional area of fiber bundle material is the same as that in Oregon R, but fiber bundles are smaller and more numerous, being distributed over the larger surface of this thicker and shorter bristle. They constitute only 7% of the cross-sectional area of the bristle. In Sn³Sb mutants characteristics of each gene are exaggerated and an extremely short, wide, and irregular bristle is formed.     

Actin filament bundles in Drosophila wing hairs: hairs and bristles use different strategies for assembly

Actin filament bundles can shape cellular extensions into dramatically different forms. We examined cytoskeleton formation during wing hair morphogenesis using both confocal and electron microscopy. Hairs elongate with linear kinetics (approximately 1 microm/h) over the course of approximately 18 h. The resulting structure is vividly asymmetric and shaped like a rose thorn--elongated in the distal direction, curved in two dimensions with an oval base and a round tip. High-resolution analysis shows that the cytoskeleton forms from microvilli-like pimples that project actin filaments into the cytoplasm. These filaments become cross-linked into bundles by the sequential use of three cross-bridges: villin, forked and fascin. Genetic loss of each cross-bridge affects cell shape. Filament bundles associate together, with no lateral membrane attachments, into a cone of overlapping bundles that matures into an oval base by the asymmetric addition of bundles on the distal side. In contrast, the long bristle cell extension is supported by equally long (up to 400 microm) filament bundles assembled together by end-to-end grafting of shorter modules. Thus, bristle and hair cells use microvilli and cross-bridges to generate the common raw material of actin filament bundles but employ different strategies to assemble these into vastly different shapes.     

A subset of dynamic actin rearrangements in Drosophila requires the Arp2/3 complex

The Arp2/3 complex has been shown to dramatically increase the slow spontaneous rate of actin filament nucleation in vitro, and it is known to be important for remodeling the actin cytoskeleton in vivo. We isolated and characterized loss of function mutations in genes encoding two subunits of the Drosophila Arp2/3 complex: Arpc1, which encodes the homologue of the p40 subunit, and Arp3, encoding one of the two actin-related proteins. We used these mutations to study how the Arp2/3 complex contributes to well-characterized actin structures in the ovary and the pupal epithelium. We found that the Arp2/3 complex is required for ring canal expansion during oogenesis but not for the formation of parallel actin bundles in nurse cell cytoplasm and bristle shaft cells. The requirement for Arp2/3 in ring canals indicates that the polymerization of actin filaments at the ring canal plasma membrane is important for driving ring canal growth.     

Role of the actin bundling protein fascin in growth cone morphogenesis: localization in filopodia and lamellipodia

Growth cones at the distal tips of growing nerve axons contain bundles of actin filaments distributed throughout the lamellipodium and that project into filopodia. The regulation of actin bundling by specific actin binding proteins is likely to play an important role in many growth cone behaviors. Although the actin binding protein, fascin, has been localized in growth cones, little information is available on its functional significance. We used the large growth cones of the snail Helisoma to determine whether fascin was involved in temporal changes in actin filaments during growth cone morphogenesis. Fascin localized to radially oriented actin bundles in lamellipodia (ribs) and filopodia. Using a fascin antibody and a GFP fascin construct, we found that fascin incorporated into actin bundles from the beginning of growth cone formation at the cut end of axons. Fascin associated with most of the actin bundle except the proximal 6--12% adjacent to the central domain, which is the region associated with actin disassembly. Later, during growth cone morphogenesis when actin ribs shortened, the proximal fascin-free zone of bundles increased, but fascin was retained in the distal, filopodial portion of bundles. Treatment with tumor promoter 12-O-tetradecanoylphorbol-13-acetate (TPA), which phosphorylates fascin and decreases its affinity for actin, resulted in loss of all actin bundles from growth cones. Our findings suggest that fascin may be particularly important for the linear structure and dynamics of filopodia and for lamellipodial rib dynamics by regulating filament organization in bundles.     

Drosophila quail, a villin-related protein, bundles actin filaments in apoptotic nurse cells

Drosophila Quail protein is required for the completion of fast cytoplasm transport from nurse cells to the oocyte, an event critical for the production of viable oocytes. The abundant network of cytoplasmic filamentous actin, established at the onset of fast transport, is absent in quail mutant egg chambers. Previously, we showed that Quail is a germline-specific protein with sequence homology to villin, a vertebrate actin-regulating protein. In this study, we combined biochemical experiments with observations in egg chambers to define more precisely the function of this protein in the regulation of actin-bundle assembly in nurse cells. We report that recombinant Quail can bind and bundle filamentous actin in vitro in a manner similar to villin at a physiological calcium concentration. In contrast to villin, Quail is unable to sever or cap filamentous actin, or to promote nucleation of new actin filaments at a high calcium concentration. Instead, Quail bundles the filaments regardless of the calcium concentration. In vivo, the assembly of nurse-cell actin bundles is accompanied by extensive perforation of the nurse-cell nuclear envelopes, and both of these phenomena are manifestations of nurse-cell apoptosis. To investigate whether free calcium levels are affected during apoptosis, we loaded egg chambers with the calcium indicator Indo-1. Our observations indicate a rise in free calcium in the nurse-cell cytoplasm coincident with the permeabilization of the nuclear envelopes. We also show that human villin expressed in the Drosophila germline could sense elevated cytoplasmic calcium; in nurse cells with reduced levels of Quail protein, villin interfered with actin-bundle stability. We conclude that Quail efficiently assembles actin filaments into bundles in nurse cells and maintains their stability under fluctuating free calcium levels. We also propose a developmental model for the fast phase of cytoplasm transport incorporating findings presented in this study.     

Growth conditions control the size and order of actin bundles in vitro.

The bonding rules for actin filament bundles do not lead to a particular packing symmetry, but allow for either regular or disordered filament packing. Indeed, both hexagonal and disordered types of packing are observed in vivo. To investigate factors which control bundle order, as well as size, we examined the effect of protein concentration on the growth of actin-fascin bundles in vitro. We found that bundles require 4-8 d to achieve both maximum size and order. The largest and best ordered bundles were grown at low fascin and high actin concentrations (an initial fascin/actin ratio of 1:200). In contrast, a much larger number of poorly ordered bundles were formed at ratios of 1:25 and 1:50, and most surprisingly, no bundles were formed at 1:300 or 1:400. Based on these observations we propose a two-stage mechanism for bundle growth. The first stage is dominated by nucleation, which requires relatively high concentrations of fascin and which is therefore accompanied by rapid growth. Below some concentration threshold, nucleation ceases and bundles enter the second stage of slow growth, which continues until the supply of fascin is exhausted. By analogy with crystallization, we hypothesize that slower growth produces better order. We are able to use this mechanism to explain our observations as well as previous observations of bundle growth both in vitro and in vivo.     

Proper cellular reorganization during Drosophila spermatid individualization depends on actin structures composed of two domains, bundles and meshwork, that are differentially regulated and have different functions

During spermatid individualization in Drosophila, actin structures (cones) mediate cellular remodeling that separates the syncytial spermatids into individual cells. These actin cones are composed of two structural domains, a front meshwork and a rear region of parallel bundles. We show here that the two domains form separately in time, are regulated by different sets of actin-associated proteins, can be formed independently, and have different roles. Newly forming cones were composed only of bundles, whereas the meshwork formed later, coincident with the onset of cone movement. Polarized distributions of myosin VI, Arp2/3 complex, and the actin-bundling proteins, singed (fascin) and quail (villin), occurred when movement initiated. When the Arp2/3 complex was absent, meshwork formation was compromised, but surprisingly, the cones still moved. Despite the fact that the cones moved, membrane reorganization and cytoplasmic exclusion were abnormal and individualization failed. In contrast, when profilin, a regulator of actin assembly, was absent, bundle formation was greatly reduced. The meshwork still formed, but no movement occurred. Analysis of this actin structure's formation and participation in cellular reorganization provides insight into how the mechanisms used in cell motility are modified to mediate motile processes within specialized cells.     

A balance of capping protein and profilin functions is required to regulate actin polymerization in Drosophila bristle

Profilin is a well-characterized protein known to be important for regulating actin filament assembly. Relatively few studies have addressed how profilin interacts with other actin-binding proteins in vivo to regulate assembly of complex actin structures. To investigate the function of profilin in the context of a differentiating cell, we have studied an instructive genetic interaction between mutations in profilin (chickadee) and capping protein (cpb). Capping protein is the principal protein in cells that caps actin filament barbed ends. When its function is reduced in the Drosophila bristle, F-actin levels increase and the actin cytoskeleton becomes disorganized, causing abnormal bristle morphology. chickadee mutations suppress the abnormal bristle phenotype and associated abnormalities of the actin cytoskeleton seen in cpb mutants. Furthermore, overexpression of profilin in the bristle mimics many features of the cpb loss-of-function phenotype. The interaction between cpb and chickadee suggests that profilin promotes actin assembly in the bristle and that a balance between capping protein and profilin activities is important for the proper regulation of F-actin levels. Furthermore, this balance of activities affects the association of actin structures with the membrane, suggesting a link between actin filament dynamics and localization of actin structures within the cell.     

Structure of actin filament bundles from microvilli of sea urchin eggs

The detailed substructure of actin filament bundles in microvilli of fertilized sea urchin eggs has been studied by analysing electron microscope images of negatively stained specimens. Transverse stripes which repeat about every 130 Å along the axis of a bundle, as previously observed by Burgess & Schroeder (1977), reflect the positions of cross-bridges that connect the filaments into a bundle. Analysis of optical transforms of the micrographs reveals that there are approximately 14 actin monomers between cross-overs of the two long-pitch helical strands of the actin filaments, with three cross-bridges in this interval. The structure is basically similar to that of the hexagonally packed bundles prepared in vitro from high speed supernatants of sea urchin eggs by Kane (1975) and analyzed by DeRosier et al. (1977). One clear difference, however, is that the in vivo microvillar filament bundles are supercoiled, giving rise to long axial repeats of 1500 to 2000 Å.Computationally filtered images of regions that were only slightly supercoiled reveal the relative alignment of filaments within the bundles and show that crossbridges appear to interact with four actin monomers, apparently linking two actin monomers on one strand of one filament to the nearest two monomers on a neighbouring filament. However, the cross-bridges are not spaced at equal intervals corresponding to four actin subunits, presumably because of the lack of hexagonal symmetry in the individual filaments, which have about 14 actin monomers between cross-overs. Instead, the cross-bridges are arranged quasiequivalently along the longitudinal axis of the bundles, in steps of four or five actin subunit spacings (28 Å each).     

Structure of actin-containing filaments from two types of non-muscle cells

Bundles of actin-containing filaments from the acrosomal process of horseshoe crab sperm and from sea urchin egg contain a second protein having a molecular weight of about 55,000. Electron micrographs of these filamentous bundles show features reminiscent of paracrystalline arrays of actin except that bundles from the sea urchin egg have distinctive transverse bands every 110 Å. From optical diffraction patterns of the micrographs, we deduced very similar models for both structures. The models consist of hexagonal arrays of actin filaments cross-linked by the second protein. The pattern of transverse bands in bundles derived from the sea urchin eggs is accounted for by postulating that the second protein is bonded to actin only at positions where cross-linking can occur, rather than being bonded to every actin. The helical symmetry of the actin requires that the bonding contacts involved in the cross-linking be slightly different at different positions along the length of the bundle. The technique of image reconstruction was used to obtain a three-dimensional map of the bundles from the acrosomal process.     

Actin organization, bristle morphology, and viability are affected by actin capping protein mutations in Drosophila

Regulation of actin filament length and orientation is important in many actin-based cellular processes. This regulation is postulated to occur through the action of actin-binding proteins. Many actin-binding proteins that modify actin in vitro have been identified, but in many cases, it is not known if this activity is physiologically relevant. Capping protein (CP) is an actin-binding protein that has been demonstrated to control filament length in vitro by binding to the barbed ends and preventing the addition or loss of actin monomers. To examine the in vivo role of CP, we have performed a molecular and genetic characterization of the beta subunit of capping protein from Drosophila melanogaster. We have identified mutations in the Drosophila beta subunit-these are the first CP mutations in a multicellular organism, and unlike CP mutations in yeast, they are lethal, causing death during the early larval stage. Adult files that are heterozygous for a pair of weak alleles have a defect in bristle morphology that is correlated to disorganized actin bundles in developing bristles. Our data demonstrate that CP has an essential function during development, and further suggest that CP is required to regulate actin assembly during the development of specialized structures that depend on actin for their morphology.     

Mechanism of actin filament bundling by fascin

Fascin is the main actin filament bundling protein in filopodia. Because of the important role filopodia play in cell migration, fascin is emerging as a major target for cancer drug discovery. However, an understanding of the mechanism of bundle formation by fascin is critically lacking. Fascin consists of four β-trefoil domains. Here, we show that fascin contains two major actin-binding sites, coinciding with regions of high sequence conservation in β-trefoil domains 1 and 3. The site in β-trefoil-1 is located near the binding site of the fascin inhibitor macroketone and comprises residue Ser-39, whose phosphorylation by protein kinase C down-regulates actin bundling and formation of filopodia. The site in β-trefoil-3 is related by pseudo-2-fold symmetry to that in β-trefoil-1. The two sites are ～5 nm apart, resulting in a distance between actin filaments in the bundle of ～8.1 nm. Residue mutations in both sites disrupt bundle formation in vitro as assessed by co-sedimentation with actin and electron microscopy and severely impair formation of filopodia in cells as determined by rescue experiments in fascin-depleted cells. Mutations of other areas of the fascin surface also affect actin bundling and formation of filopodia albeit to a lesser extent, suggesting that, in addition to the two major actin-binding sites, fascin makes secondary contacts with other filaments in the bundle. In a high resolution crystal structure of fascin, molecules of glycerol and polyethylene glycol are bound in pockets located within the two major actin-binding sites. These molecules could guide the rational design of new anticancer fascin inhibitors.